XCM Settings--B2B Setup

Hi Everybody,
I've been trying this B2B thing (configuring B2B on ERP 6.0) for some time now..but things jus seem to get stuck:(
With your help, the link http://<host>:50100/shopadmin/admin/xcm/init.do-->works fine, however
http://<host>:50100/shopadmin/shopadmin/init.do-->gives the foll. Error:
ISA Framework: No XCM application configuration has been passed and there is no default XCM application configuration defined. Check XCM configuration
I'm not really sure about what to do after installing XECO on ERP..
I've gone thru' all the guides on SMP for SAP ECO but most of them are quite obscure.
Anothr doubt..do I have to enable the VMC?
Please help ...
Thanks a lot,
Saba.

Hello,
I have the same problem.
I done the settings in the B2B XCM Tool (http://<host>:<port>/b2b/admin/index.jsp) and the Shopadmin XCM Tool (http://<host>:<port>/shopadmin/admin/index.jsp) .
There are the JCo Connections Data and also Customer Application Configuration for B2B.
Now I get the message
ISA Framework: No XCM application configuration has been passed and there is no default XCM application configuration defined. Check XCM configuration
when I start http://<host>:<port>/shopadmin/shopadmin/init.do
We use E-Commerce 5.0 SP 15 on NW 7.0 SP 19 and a ECC 6.0 system for backend.
Does anybody have an idea?
Thank you!

Similar Messages

XCM Settings for IPC 6.0 to work with B2B ERP 6.0 E-commerce application

Hi All,
We are currently implementing B2B ERP (ECC 6.0) E-commerce using IPC 6.0 for the sales pricing and configuration needs.
To make IPC work with B2B E-commerce application I need to do the necessary XCM settings for IPC. I launched the following URL to do the XCM settings for IPC. http://<hostname>:<portnumber>/ipc/admin/xcm/init.do I created a JCO connection with ECC system using the menupath Components->Customer->JCO and adding values to required fields such as Base Configuration (value: server_connect) , Server, Client, Message Server, Userid and Password. I saved the configuration to create the necessary JCO connection with the ECC system. I executed the "Run Test" option and found the test to be successful.
To complete the Application Specific settings in XCM, I followed the menupath 'Application Configurations->SAP->erp' to create a new customer configuration. In the field JCODATA of the new configuration I added the JCO component name that was created in the previous step. I made this as the default configuration and saved it. The new configuration shows up under the sub-node Application Configurations->Customer-> 'New Configuration Name'.
Please let me know do I need to do any other XCM settings for IPC? Is there anything missing or need to be rectified? How I can test and make sure that IPC is connected to ECC and ERP E-commerce application and the connection is working fine. Please answer in detail.
Thanks in advance.
--R D

Hi,
Go to B2B XCM application : http://host:port/zb2b/admin/index.jsp
select "Extended Configuration Management (XCM) Administration"
then select your application configuration from the "Customer" node.
Click on the "Display" button.
then maintain "ipcdata" parameter as what you have maintained in the IPC application.
Thanks,
Dinesh.

What is B2B setup for grouping transaction sets based on criteria.

Hi,
Oracle B2B offers a time bound Batching feature . However to handle following case such as Batching based on Order Number it is required to define the criterion.
Could you please provide the information on B2B Setup for grouping transactionsets based on input parameter(Invoice id OR Invoice Number or Payment ID ) passing from back end application(BPEL) to B2B.
For count based batching , my understanding is need to pass information in the format " <BatchMode>:<BatchID>:<Count>:<timeout>:" by parameters delivered with the IP_MESSAGE_TYPE construct. Which paramter of IP_MESSAGE_TYPE construct I have to use for passing the values to B2B in the format " <BatchMode>:<BatchID>:<Count>:<timeout>:"
I am unable to find Action name attribute of IP_MESSAGE_TYPE construct to pass the values. Please provide the required information.
Thanks&Regards,
Sridhar.Rachumallu.
Edited by: sridhar.rachumallu on Sep 7, 2010 11:06 AM

Hi Anuj,
Thanks for the information.
ACTION_NAME attribute is not available with SCA. Three channels (Default,AQ,JMS ) are provided in B2B adapter for connecting to B2B. Which one supports action_name attribute?
Design Time:
Presently by using 'Default' channel of B2B adapter i am connecting to B2B. I am unable to pass the value for b2b property "ACTION_NAME" because invoke activity does not has respective sca normalized message propertie "b2b.actionName". So i am adding input property tab in .bpel file under corresponding B2B Adapter invoke tag as given below.
<invoke name="Invoke_Put3070EDI820"
inputVariable="Put3070EDI820_InVar"
partnerLink="Put3070EDI820"
portType="ns1:B2B_send_ptt" operation="send">
<bpelx:inputProperty name="b2b.toTradingPartnerId"
variable="Variable_TargetTPartner"/>
<bpelx:inputProperty name="b2b.fromTradingPartnerId"
variable="Variable_SourceTPartner"/>
<bpelx:inputProperty name="b2b.documentTypeName"
variable="Variable_TransactionSet"/>
<bpelx:inputProperty name="b2b.documentProtocolVersion"
variable="Variable_EDIVersionNo"/>
*<bpelx:inputProperty name="b2b.actionName"*
variable="Var_B2Baction"/>+
</invoke>
Defined variable ' Var_B2Baction' as string and assigned the expression as "concat('D:',bpws:getVariableData('Var_B2BBatchID'),':2:60')" and composite instance id expression "ora:getCompositeInstanceId()"mapped to 'Var_B2BBatchID' in BPEL.
Run time :
In application message of B2B coming the value as "b2b.actionName=D:608469:2:60". Here count coming as 2 but B2B is not grouping 2 transaction sets.Creating one EDI file for one transaction set.
Why B2B is not considering incoming value "b2b.actionName=D:608469:2:60" for batching the transaction sets.
Please suggest me the correct approach if i am wrong.
Thanks&Regards,
Sridhar.Rachumallu
Edited by: sridhar.rachumallu on Sep 8, 2010 4:24 AM
Edited by: sridhar.rachumallu on Sep 8, 2010 4:25 AM
Edited by: sridhar.rachumallu on Sep 8, 2010 4:27 AM
Edited by: sridhar.rachumallu on Sep 8, 2010 4:27 AM

XCM Settings transport

Hi Gurus,
I haven't found anything about transport of XCM setting from an environment to antoher.
Is this possible?
can you help?
thanks

Hi,
Yes you can transport the XCM settings.
In the first node of XCM settings you find the options to download XCM Configurations. You have to download two fiels and can be uploaded to other environment at the same place in EDIT mode.
Regards,
Sateesh Chandra

Sending 3B2 document manually to test B2B setup and BPEL SOA composite

HI
I am trying to setup a new 3B2 agreement with a customer.
Can I send a 3B2 document to B2B manually,on behalf of the would be customer to test if my B2B setups work
Is there a way to do this.
Regards
Vamshi

HI
I am trying to setup a new 3B2 agreement with a customer.
Can I send a 3B2 document to B2B manually,on behalf of the would be customer to test if my B2B setups work
Is there a way to do this.
Regards
Vamshi

Reset / Flush XCM Settings

Hello,
I have a problem using the XCM in Biller Direct. After I tried to append a new customer specific parameter to the XCM - the XCM seems to be corrupted. Since then I am unable to call the Admin Page or /admin/xcm/init.do directly.
Using NW 2004 was easier to handle. There was just a global directory which holds the XCM settings, but it seems that NW 2004s has changed. The former directory is now only used to cache some encrypted XCM settings. I expect, that the settings are stored now somewhere in a Database?!
I found no way to flush the XCM settings, which are probably corrupted. Does anyone know how I can do this?
Furthermore it would be fantastic if someone has a documentation how I can extend the standard XCM settings by some own parameters.
Cheers

Hi,
thank you for your offer, but I found the issue.
There was a bug in the XCM and it was fixed by applying a patched version. I am not able to extend the XCM by customer parameters.
Just for your information. The documentation does not tell the same, what the code behind is going to do! Biller Direct is using the XCM not correctly and hence brings up some strange behaviours like unecessary restarts and just only one working scenario at the same time! It would be neccessary to make a refactoring, so that you really can use the whole functionaly of the XCM.
Regards!

Documenting profile settings and setup information

Hello,
I am looking for an easy way to document all of the profile settings and setup information in several installations of Oracle 11.5.10 on Linux.
Ideally we want to be able to print and compare the configurations of several installations; quickly and easily!
I am aware of a product from Compelsolve called ConfigSnapshot, but this costs about £25K, so a bit out of our budget!
Anyone found anything that may help?
Martin.

What I did was install iCloud again - uninstall it properly so everything goes - reinstall iCloud in a separate directory and finally it worked. This may be all you need to do - but in case there are other things I did that helped see below.
This was after I had actually installed and reinstalled Outlook. In between I actually upgraded from 2010 to 2013 Outlook which I installed, uninstalled, reinstalled, repaired - as you have done.
I also absolutely cleared the Outlook calendar to remove not only repeating entries but all entries - put it in List View to do this. Some have said that recurring entries in Outlook cause problems.
I actually exported my Outlook email and imported back in under a different profile and deleted the Outlook profile - renamed my new profile Outlook - but that I don't think made much difference.
I believe that the clean install of iCloud worked. Also I had deleted the Sync file long ago - you can find it in Outlook if you look for your data files - there's one with an obscure name - I deleted that and moved it.
I got rid of the Outlook Config file - it's in Roaming, not Local - username/AppDat/Microsoft/Outlook/YOURPROFILE.XML - you can actually set profiles from the Control Panel if you go to Mail....

XCM Settings for CRM ISA 4.0 SP10

Hi !
We are currently upgrading a CRM 4.0 ISA application from SP5 to SP10. The XCM settings for the vanilla 'b2c' webshop has been completed and the vanilla 'b2c' application has been extended to a new b2c application using the old extended application files with the new 'buildtool'. However, when we try to run the extended b2c project, after successfully deploying the new .ear file, we get an error that the XCM settings couldn't be found. The vanilla 'b2c' application runs perfectly though.
Could anyone with experience in CRM 4.0 ISA application SP10 list any unique steps to get the extended XCM data for the extended application correctly in the 'web.xml' file ?
Cheers,
Ashok.

Hi Amit,
The config path for "%sys.global.dir%/xcm/${com.sap.dc_name}" should normally point to the standard XCM settings and ideally it should be outside the folder structure of the application (ie) not within either <Inst-Dir>:\usr\sap\SID\DVEBMGS00\j2ee\cluster\server0\apps\sap.com\crm.b2c\servlet_jsp\b2c\root\WEB-INF
or <Inst-Dir>:\usr\sap\SID\SYS\global\xcm\crm.b2c. Prior to CRM ISA 4.0 SP6, context parameters would determine this path during each deployment. This would ensure that an extended application would always point back to the standard XCM settings rather than having to maintain multiple XCM settings for each extended application. The reply from SAP OSS suggests that post CRM ISA 4.0 SP6, XCM settings would have to be maintained for each extended application (something that SAP supports) or the value of the config path of "%sys.global.dir%/xcm/${com.sap.dc_name}" should be changed individually for each extended application using the visual administrator to point to the standard XCM settings (something that SAP suggests as a work around but doesn't support).
Again, this problem is mainly caused by the fact that the context parameter of the XCM settings during deployment of any application has been removed from the SDM post CRM ISA 4.0 SP5. Removal of this context parameter from the SDM means that one would have to adopt either approach as suggested by SAP as above.
I hope this helps others out there who are migrating from a pre CRM ISA 4.0 SP6 to a post CRM ISA 4.0 SP6.
Cheers,
Ashok.

B2B setup question.

I have a requirement, where the PO reqest will come from the partner in a ftp server and B2B will pick it up from that server and send the document to BPEL for further processing. I tried to set up B2B by following the purchase order tutorial present in B2B user's guide. Here the difference is that I have setup the remote trading partner is in the same server as the host TP and using the same repository. What is happening is that after I enqueue the message(test.xml) in IP_OUT_QUEUE, it seems B2B is picking it up because I don't see that IP_OUT_QUEUE after a few minues, but it is not going to IP_IN_QUEUE. I have set my BPEL process to look into IP_IN_QUEUE.
I also don't see any b2b.log file where I can see the errors(if any).
Do I have to use some other setup?
Can you please help?

I manually created everything present in that tutorial(because the import was giving some error) where GlobalChips is the Host partner. But what is the proper way to test it. As per the tutorial I should run the enq_ordrsp.sh . I did it and it enqueued in IP_OUT_QUEUE, but then nothing happened. Also, since the transport protocol is File, shouldn't I test by downloading the Acme_orders.xml file in the directory I mentioned in my URI?
My next question is if I can make EDIFACT tutorial work then I have another issue to sort out, which is, my document is in Rosettanet format. Somewhere in the discussion forum I saw that for my business case scenario, if I take purchase order tutorial and change the DCs to File/FTP it should work. But for the version of B2B I have File/FTP are not supported protocols for Rosettanet. Is it added later? or do I have to setup something else for getting those protocols for Rosettanet?

Settings and setup

Just a quick couple of questions, I hope , I'm switching ISP's I already use a netgear N600 a my router/modem with a home network set up, I'd rather not use the HH4 that's coming, can I assume setup and settings are simple? And can anyone confirm exactly what the setting are?
I've seen these suggested...
Logon username: Created when setting up your account - example: [email protected]
Logon password: No password is required, as BT uses the phone number you're connecting via for authentication. If your router needs one, use "BT"
Encapsulation: PPPoA or PPP over ATM
15,800.00 VC-based or VC Mux
VPI/VCI: 0/38
BT Broadband Primary DNS address: 62.6.40.162
BT Broadband Secondary DNS address: 194.72.0.98

Thanks, anything else I should be aware of? Or will I just be able to set up and go? (Fingers crossed of course )

Transport XCM settings

Hi Experts,
Please tell me how to transport XCM configuration settings from one server to other (DEV --> QUAL --> PROD). Like we have transport request system in other SAP functionalities, do we have something of this sort in XCM also?
Thanks
Varun

Hello Varun,
Usually it is created (input) or copied in each environment for a couple of simple reasons.
The backend system (host name, system #, client, user id and password of Jco user) properties are different in different landscape.
The XCM files default location is same in all the environments. So, it is usually copied from one environment to the other and the required information is changed ( jco component and the default Customer configuration )
Easwar Ram
http://www.parxlns.com

IPC XCM settings

Hi Experts!!
Does anybody know from where I can configure the scenario.basket and scenario.cat parameters of the IPC component of ISA on XCM?
thanks in advance!!!!Reward points promised!!!

Andrea,
the IPC has its own set of XCM parameters. I suggest you take a look at the "advance settings" of the IPC component.

The latest firmware is on the server. Install the firmware update from (Device Settings) in (Setup)

I'm getting this message on my printer (MG7120), but have no idea what it means.

Hi shirlcl and JCHa,
Updating the firmware of the printer should remove the message from your printer. To perform the firmware update, please follow these steps:
IMPORTANT
DO NOT power off the printer during the update.
(1) Power on the printer.
(2) Confirm that the printer is connected to the Internet.
(3)Tap [ Setup ].
(4)Tap [ Device settings ].
(5)Tap [ Firmware update ].
(6)Tap [ Install update ].
(7) The message will be displayed, asking you if you wish to update the firmware. Tap [ Yes ].
(8)Tap [ Start update ]. The update will start.
(9)When "Update succeeded" is displayed, tap [ OK ].
Update of the firmware is completed.
Hope this helps!
This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

What is the b2b setup for identifying TP names from file name in Inbound tx

Hi,
I am using B2B 11g version and documents of type ANSI-X12. I am working for Inbound Transaction and using Generic File protocol in Listening channel.
File format is : %FROM_PARTY%_%TO_PARTY%_%DOCTYPE_NAME%_%DOCTYPE_REVISION%.dat
How can i make B2B to identify Trading partner names from the file name once the remote trading partner put the file in the specified path with the specified format "%FROM_PARTY%_%TO_PARTY%_%DOCTYPE_NAME%_%DOCTYPE_REVISION%.dat" mentioned in the delivery channel.
Now B2B is identifying Trading partner names from the Interchange Sender ID(ISA06) and Interchange Reciever ID(ISA08) of the ISA Segment. Please help me , how to make B2B to identify the trading partner names from the file name instead of from identifiers coming in ISA Segment.
Thanks,
Sridhar Rachumallu

Hi Anuj,
1)Now i am giving the file name for inbound documents in the format of "%FROM_PARTY%_<UniqueNumber/Timestamp>.dat" . But still B2B Identifying the TPNames at runtime from the ISA Segment elements ISA06 & ISA08 element values. I want to make B2B to identify the TPNames at run time from the file name instead of from ISA Segments.
Please tell me how can i do these?
2) I am giving exact Remote Trading partner Default Identifier Type 'NAME' value for "%FROM_PARTY% in the file format and i want B2B to identify the TP name at runtime based on the value of "%FROM_PARTY%" . If the value of "%FROM_PARTY%"is matching with any one of the Trading partner Default Identifier Type 'NAME' value than it should go for furthur else B2B should through error as " the TP name unable to found".
3) Please tell me how B2B Identify trading partners at runtime in the business case given below
- Inbound Transaction from remote TP to Host TP
- Document protocol is 'ANSI-X12'
- Listening channel protocol is 'Generic File'
This is very urgent.. Please give the reply As soon as possible.
Thanks,
Sridhar.rachumallu
Edited by: [email protected] on Jun 9, 2010 12:45 AM
Edited by: [email protected] on Jun 9, 2010 1:01 AM

How to delete all mail settings and setup mail as if new installation?

Grrr! Comcast had my Mom change all sorts of email account and ISP settings, to the point where nothing works. I want to delete "everything" and start from scratch as if I just pulled the Mac out of the box. Will just deleting her email account be enough? Should I delete any files from the library? Etc.
Thanks!

All you have to do is delete the account. This will also delete all her downloaded mail if this is a POP account.

XCM Settings--B2B Setup

Similar Messages

Maybe you are looking for