XCODE 3.2 INSTALL ON SNOW LEOPARD FAILED.

I have just upgraded my Mac Pro 8-Core computer with the new Apple RAID card. I have two 1 TB hard drives created in a mirror RAID 1 with two 500 GB volumes.
Snow Leopard installed just fine on the new RAID set. I have green lights on all raid components as shown by the RAID Utility.
I tried to install XCODE 3.2 off the Snow Leopard install DVD (five pack version) and it acts like it is installing the package until you are down to the final 1 minute of the install and then comes up with a window stating "The Installation Failed". I don't know what the issue is.
I then decided to download XCODE version 3.1.4 off the Apple website, and that package installed successfully without any problems. I then decided to go back to the install DVD and install the "other optional software packages" and of the packages that I installed they installed just fine.
Is there some work around to the XCODE 3.2 install?
Thanks
Don-L

I FIXED IT.....
ALL WORKS FINE NOW.
WHAT I HAD TO DO.
1) INSTALL THE OLD OPERATING SYSTEM (INSTALL DISCS THAT CAME WITH THE COMPUTER) ON TO MY NEWLY CREATED RAID DRIVES.
2) PATCH THE OPERATING SYSTEM UP TO CURRENT PATCH LEVELS.
3) INSTALLED THE OLD XCODE THAT IS ON THE ORIGINAL INSTALL CD'S.
4) INSTALL THE NEW SNOW LEOPARD OPERATING SYSTEM.
5) INSTALL XCODE 3.2 PACKAGE INCLUDED WITH THE SNOW LEOPARD CD.
6) ALL SHOULD WORK FINE.
I SUSPECT THAT IN THE PACKAGE INSTALL ROUTINE THE INSTALL CHECKSUM DID NOT CONFIRM A VALID INSTALL OF SNOW LEOPARD OVER THE ORIGINAL COMPUTER OPERATING SYSTEM.
THIS WAS TIME CONSUMING BUT EVERY STEP PRODUCED A "BIG GREEN CHECK MARK" CONFIRMING THE INSTALLS WORKED CORRECTLY.
I NOW ALSO HAVE WINDOWS XP RUNNING UNDER PARALLELS DESKTOP 4.0 FOR MAC RUNNING CORRECTLY ALSO.

Similar Messages

Clean install of Snow Leopard fails

Dear all,
As the title says my current issue is that I'm unable to perform a new installation of Snow Leopard after performing a single-pass secure erase of the Mac partition of my hard drive. However, some background to the problem is probably useful.
My troubles begin after attempting to transfer files from an USB stick to my Macbook pro. Drag/drop or copy/paste in finder resulted in nothing happening. I ejected the USB drive (which flashed to let me know the drive itself thought it had been ejected) however the USB stick did not disappear from Finder. Further attempts to eject the stick using finder did nothing. Attempting to reset Finder produced the well known "The application Finder.app can't be opened. -10810" error (see http://discussions.apple.com/thread.jspa?threadID=2135129&tstart=45). After reading through that thread and trying some of the suggestions I eventualy had to resort to a hard reset of my macbook. After restarting the macbook ran very slowly for a couple of minutes before producing the same Finder error as before (though no external drives/devices were involved this time).
After coming up against the same problem again and again I decided to verify and repair the drive using the OS X installation cd that came with my macbook pro. The hard disk itself seemed ok (S.M.A.R.T: verified), which I expected as I have Windows 7 running under bootcamp on a separate partition. (As a quick aside, Windows 7 was and still is running fine, and in fact I could successfully access and open all the files on my Mac partition from within windows. This allowed me to grad up-to-date copies of all my important files before taking more drastic action.) Verifying the mac partition resulted in a message saying the disk needed repairing. Attempting to repair the disk initially resulted in errors saying a clean install was required, though the repair succeeded on my 4th attempt. This repair failed to fix the problem and I was still getting the very slow running leading quickly to the same Finder error.
Eventually i decided my only option was to perform an erase and install of Snow Leopard. Initially I simply erased the partition using Disk Utility after booting from the install disk (default option) and then attempted to install Snow Leopard. The install failed repeatedly, alternating between 'An error has occured in the installation process' and 'Unable to install supprting files' error messages. I also tried repairing the disk after erasing and then installing with the same errors. I then performed a single-pass secure erase on the Mac partition (again from Disk Utility via the startup disk), verified the drive (finding an unassigned node error), successfully repaired the drive (twice, just to make sure) and attempted another installation, which again failed with the 'An error has occured in the installation process' error.
So I currently have a formatted Mac partition which refuses to accept a new Snow Leopard install and a fully working copy of Windows 7 running under bootcamp on a separate partition of the same disk. Is there anything else I can try other than reformating the entire hard drive and losing my bootcamp installation?

try this idea: Do a leopard install to an external disk then do a Disk Utility "restore" function to that clean partition. So you restore from the external to the internal partition. Should leave Bootcamp untouched.

I had this imac 27" two years ago,updated to snow leopard 10.6.8 and suddenly the imac shut down and able to start again from the beggining,i had the leopard 10.5.8 and my problem is i cannot re-installed my snow leopard.Do i have to update my old leopard

I had this imac 27" two years back(leopard 10.5.8) and no problem was encountered so far! (thanks 4that),i always made an update as far to snow leopard 10.6.8. Unfortunately when i did some application /downloading,the system was off and when i turn it On the logo of an apple only came.So what i did is to start all over again,now i am two years old back with Leo-10.5.8,My problem is i cannot install my snow leopard,it reads that i have to clean tha disc which i did and thru utility disc.Any help please and i really appreciate to every1 helping me to solve the problem.I will keep in touch.
Many thanks! - Angel

BTW,I purchased the SL by retail and originally installed for the first time in my IMAC 27" ,unfortunately during the upgrading of the system,suddenly it was totally gray.then off as it killed my imac.i switch it On but only the apple logo came and waiting for so long.I tried to start from the very beginning,installed the DVD installation that was originally came from imac..it works and i have now the latest version of Leopard 10.5.6...then .8 thru updates. My problem is i cannot re-install my SNOW LEOPARD that i purchased from retail store..proceeded to install in my imac but everytime it ends with 'FAILED-pls clean the disc" i did the cleaning but still the same,:installed failed!-The installer could not copy the necessary support file",i tried booting from the disc holding C down but no luck at all. Anybody can help me please. Many thanks ..

Juniper networks VPN: Network Connect will not install under Snow Leopard

Created different thread based on the topics from http://discussions.apple.com/thread.jspa?threadID=2130935.
With new install of Snow Leopard i get the following when trying to log into SSL VPN "Could not launch. Please restart the web browser and try again"
can not do the workarounds from the above thread since none of the directories exist. Has anyone found a fix for this?

I ran into this too (made matters worse by cleaning out the old juniper install). What I understand clearly now, which other discussions with all the happiness from people saying they fixed it seem to miss completely: Juniper only works if you installed it prior to upgrading 10.6. If you did not, you are possibly hosed.
Now, I was hosed, but I found a workaround. Find a stand-alone installer .dmg out there. As of a couple days ago it was there. I'm sure it still is. Google it. NetworkConnect.dmg.
It is version 6.0.0. It installs correctly. My company runs 6.4.0, which means the first time you open NetworkConnect after installing it prompts you to upgrade. The upgrade worked fine, so long as I was running as root.
Which brings me to my original problem which I've not seen anyone else complain about, which has me worried: after installing, NC only actually connects and functions when I run as root. I'm not talking about su - root or using sudo, I mean having to graphically switch users and log into the computer as the root user (after enabling it...using the scenableroot I think, something like that).
Has anyone else seen this behavior? I can launch Network Connect as my real user but it immediately fails with a software error. 'ncproxyd.error: Failed to gain root privileges'. Driving me batty.

Wiped my entire macbook drive and now snow leopard won't install over snow leopard server, HELP!

I ordered, what I thought, was Snow Leopard a while ago because I was running Leopard and I wanted to get the app store so I could move onto Lion and then Mountain Lion. I ordered the disc over the phone and the woman sent me the Snow Leopard Server instead of just Snow Leopard, I didn't think much about it so I clean installed it and ran it on my unibody macbook for a while. I didn't see much use for the disc anymore seeing that everything was downloadable at this point, so I sold the disc on Ebay and carried on. The server edition started to slow my computer down due to all of its excess applications and what not, and I read online that Lion and Mountain Lion are also very slow on the old unibody Macbooks so I ordered a regular Snow Leopard disc, now available online, and tried to install it. My computer said Snow Leopard cannot be installed over Snow Leopard server so I went to disc utitlity and wiped my entire drive while the OS X Snow Leopard disc was running and trying to install. I went back to the install window and it still said OS X Snow leopard cannot be installed over Snow Leopard Server so I shut down my computer and tried to turn it back on and I all I got was a blinking folder with a question mark in it, what do I do????????
P.S. All of my content is backed up on an external harddrive so I am all good with that.

Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. After formatting has finished quit DU and return to the installer. Complete the Snow Leopard installation.

Why I can't install the snow leopard?

Hello! I have a 2007 model Macbook with 2.4 Ghz Intel Core 2 Duo and 2 GB 667 MHz DDR2 SDRAM. It is on 10.5.8 and I want to install the snow leopard 10.6. I have the original DVD and I start to install it. But a few min. later it says:FAILED! What can I do about this problem? The problem is about my Mac?Please write a comment and HELP!!!

Have you purchased a retail copy of the Snow Leopard DVD?

SSD Issue: Can't Install OSX-Can I use Target Mode to Install OSX Snow Leopard onto a laptop?

Cannot reinstall my OSX Snow Leopard from my original disks: 2010 MacBook Pro 7,1.
Cannot do a Recovery Install—just put in a solid state drive, and have to do a clean install, cannot clone old OS off the old hard drive.
Can I make my tower/desktop computer work somehow, I have a .dmg Snow Leopard Installation file on my tower. I'm out of options; I've tried to do a recovery download of Yosemite and usb startup thumb drive. Nothing is working: crashing, stopping short of full installation.
I'm just trying to get any operating system to install on the MacBook Pro. Nothing seems to work.
-the old hard drive had issues that couldn't be resolved, seemed like software.
-swapped it out with ssd drive, had made backup of all files.
-tried to startup with installation disks/ original osx snow leopard disk. Failed, wouldn't complete
-tried to do recovery download installation via internet, cmd-r, with Yosemite but that seems like a long shot. Just kept stalling, so it seems like this model cannot support that os without first having the original os?
-made a thumb drive an installation of osx 10.6.8
-nothing is working

Since you provide no information regarding what has happened other than it didn't work, how can we help you? I can only give you the whole process:
Clean Install of Snow Leopard
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the SSD's entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. After you finish Setup Assistant will complete the installation after which
         you will be running a fresh install of OS X. You can now begin the update process
         by opening Software Update and installing all recommended updates to bring your
         installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1. You can now log onto the App Store with your Apple ID. Go to your Purchases page and re-download the last version of OS X that you purchased and/or downloaded prior to the release of Yosemite.

I have been installing the Snow Leopard upgrade for 3 hours. Is this normal?

I have been trying to install the Snow Leopard uprade that I received from Apple Inc., but it has said that it will take 45 minutes for the last 3 hours. Is this normal?

Are you referring to the Snow Leopard DVD? What specific model are you installing it on? Are you upgrading an earlier version of OS X? Did you do this before attempting to install the upgrade:
Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
An upgrade can take a couple of hours but usually 45-50 minutes would be normal.

Just purchased a ipad2, could not us it on my MacBook 10.4.1 - Purchased and installed OSX Snow Leopard 10.6.3 - downloaded and installed latest itunes, set up a itunes accounts and tested by purchasing an album and app, ipad does not show in devises?

I just purchased a ipad2, it would not work on my MacBook 10.4.1 I purchased and installed OSX snow leopard 10.6.3 downloaded and installed the latest itunes, set up an itunes account, purchased some music and apps. When i plug in my ipod it shows up and works, but when i plug in my new ipad the ipad screen comes up with a display of a cable and itunes but does not show in devises, i have tried all the resets and different USB ports with no success. Any ideas short of selling it on ebay or buying a new computer?

If you've already tried the usual rebooting of the computer and ports and stuff, there is only a few things left I can think of. It's possible that when you updated iTunes it didn't fully replace all the files, so I suggest just manually removing iTunes and then reinstalling it.
Try removing iTunes manually first http://support.apple.com/kb/HT1224 then download a fresh copy, make sure it is 10.3.1
It is essential that you go through Finder to remove those files it mentions. Otherwise they won't be reinstalled when you run the installer again.

How can i do a re-install of snow leopard?

it has been suggested that i do a fresh re-install of snow leopard to remedy my battery issues (extreme drop in charge with sn installation http://discussions.apple.com/thread.jspa?messageID=10258624). i'm new to macs, so i'm wondering how to go about the re-install. can anyone help?
thanks,
mangrel

Jolly Giant wrote:
Apparently not.
is it allowed to display one's email in the plain ? i'll try it though i might jeopardize my level 2 status. gosh, you have to be so +politically correct+ these days, unlike the old days in the west where anything used to go (i loved the show Deadwood, me, if that was anything like the real west, though).
Thank you for your vote of confidence, the FWIW. It's not like it is here on most forums. The official MS sites are a bit tight too.
On the issue of the points system. You don't see a lot of points given. I don't know why those seeking help aren't interested in tossing a carrot to the unpaid Apple helpers. Perhaps Apple could do more to encourage them. Except that users don't play, I think the point system is pretty good. Usually, I think points are given to decent or good solutions and helpfulness. But, you see excellent solutions given by talented individuals, e.g., V.K., totally ignored point-wise on a wholesale basis.

How can I do a clean install of Snow Leopard with out losing iLife applications?

I bought my Macbook pro in 2009 and am currently running the Leopard software. I want to do a clean install of Snow Leopard, but I do not want to lose my iLife applications. I lost the DVD's that came with the computer. Is there any way I can do a clean install of Snow Leopard with out losing my iLife applications?
Will a regular installation of Snow Leopard allow the App store to recognize that my computer has iLife and mark it as a purchased item in my account. If it can, then would I be able to do a clean install and re-download the apps for free.
Any help would be appreciated!

1. Install Snow Leopard normally; this will keep the applications intact. An actual clean installation involves either erasing the partition or creating a blank one, and neither of those will carry the applications over.
2. The previous iLife installation won't carry over to the Mac App Store, and the Mac App Store versions are incompatible with Snow Leopard.
(97485)

Can I do a clean install of Lion, onto my Mac Book Pro4,1, that is currently running 10.5.8? I have seen U-tube videos on how to do a clean install to Snow Leopard, and another from SL to Lion, but can zero out my HD, and do a clean install to Lion?

Can I do a clean install of Lion, onto my Mac Book Pro4,1, that is currently running 10.5.8? I have seen U-tube videos on how to do a clean install to Snow Leopard, and another from SL to Lion, but can zero out my HD, and do a clean install to Lion?

See this article.

Had to wipe my drive so I could do a clean install of snow leopard Now I look every where on how to move bookmarks, address book and I cal settings. I have them back up on a external drive with Time machine but can not move, copy or restore my old sett d

Had to wipe my drive so I could do a clean install of snow leopard. Now I have look every where on how to move bookmarks, address book and I cal settings. I have them back up on a external drive with Time machine but can not move, copy or restore my old settings. The instructions I have found or no help or needs more clarafication on what to do.

Use migration assistant to move your files. http://support.apple.com/kb/HT4889

Just done a fresh install of Snow Leopard with all updates,iMac 5.1 behaves strange, sometimes I start Google Chrome and look at youtube videos the computer freezes and shuts down immediately, I believe its related to overheating ?

Just done a replacement of the pata DVD drive (its new and is working ok), and a fresh clean install of Snow Leopard with all updates, iMac 5.1 behaves strange, sometimes I start Google Chrome and look at youtube videos the computer freezes and shuts down immediately,
I believe its related to overheating ?
iStat Pro shows GPU diode temp at 66 C, CPU at 48 C, Fan rpms is around 1000
Any ideas somebody ?
The hard disk has been previously checked with state of the art techniques that have confirmed that the hard disk drive is in perfect condition.

1.5-3 minute boot up as opposed to 15-20 seconds
And
why it takes a long time to load a lot of things.
I have restored this
from a time machine partition.
TimeMachine is only a backup and restore, it won't fix issues in software and according to your information, doesn't even optimize the restore for best performance on boot hard drives.
What you need to do to regain your speed is to understand how your machine works
Why is my computer slow?
Fix any and all issues in software following this list of fixes
..Step by Step to fix your Mac
Then follow this defrag method I've outlined
How to safely defrag a Mac's hard drive
Most commonly used backup methods
There shouldn't be need to reinstall OS X fresh unless your having file structure issues which if they are should appear when in the Steps, which then a zero erase and install will cure as well as any bad sector issues, the defrag step wouldn't be necessarry on a freshly installed system obviously as the files are written all together, not in portions all over the drive.
Hope this assists.

Help Please! Trying to do a clean install of Snow Leopard on a new drive

I'm trying to help a family member with his Mac Mini.
He installed a new HD and we're trying to do a clean install of Snow Leopard from the DVD. I've tried booting to the DVD by holding the C key during boot up and that does nothing. I've tried mounting his HD on my Macbook and installing that way and that doesn't work either.
How do I install this if you don't have an OS on you drive to boot up to?

Michael Brown1 wrote:
I was able to boot it in target disk mode by holding T. I formatted the drive as Mac OS Extended (Journaled) I've read in a couple places about GUID but I can't find that as an option on the Disk Utility.
Partition tab, Options button.
Is it possible to load the OS onto the Mini from my Macbook? I can see the installation DVD and the HD on the mini from my Macbook, but when I try to install I get a warning that it can't be installed on that volume.
It's been a while since I tried something like that, but it worked in the past. It may be complaining because the partition table is not set correctly.
I couldn't find anything about installing on another drive. I did find this old [MacFixIt article|http://reviews.cnet.com/8301-13727_7-10329087-263.html] that you might find useful if you've got an external drive. Essentially, you partition it (not necessary for what you want), make an image of the Installer and then restore the image to the external drive. You can then use that drive as the boot drive. That was for Leopard, so I don't know if it will work.

XCODE 3.2 INSTALL ON SNOW LEOPARD FAILED.

Similar Messages

Maybe you are looking for