Xcode 4.1.1 update version still says 4.1 after update

Xcode 4.1.1 update version still says 4.1 after update.
About also says 4.1.
Any others with same?
Thanks ... Ken

There is no change to Xcode in the update. It is just the updater itself that is updated.
The app-store says:
"You do not need to re-run the installer if you already have Xcode 4.1 for Lion successfully installed, as the included tools are unchanged in this update"

Similar Messages

  • Firmware update version 1.2 never goes after updating it, why so?

    firmware update version 1.2 never goes after updating it, why so?

    Jimmy Chiu wrote:
    It is during the second stage: Running the Installer.
    Down the update manually from here:
    http://www.apple.com/downloads/macosx/apple/firmware_hardware/
    Be very very sure to select the correct one.
    Install this one and see if it works. Usually this is a better way anyway.

  • After update iTunes still says I need to update

    when I try to access iTunes it tells me I need to update my device. It gives me step by step. It then says it is up to date. But i still can't access itunes. It gives me the same message "Need tp update device". Don't know what else to do other than follow the directions. I have even rebooted my iPhone. No luck. Any suggestions?
    thanks,
    Bryan

    When I click on "New music" from itunes in my email Safari opens and says
    " You neede to update your device's software to access the itunes store."
    It continues with these directions that I have followed.
    "Simply sync your device to your computer and click " Check for update" and then click this itunes store link again from your device when syncing is complete."
    Thanks for the phone # I may give that a try next.
    Bryan

  • I started my update for ios 5.1for iPhone 4s and cancelled it have way through now it says it's downloaded but really it's not the update is still there and when I try to update it it says unable to install update : an error occurred installing iOS 5.1  ?

    I started my update for ios 5.1for iPhone 4s and cancelled it have way through now it says it's downloaded but really it's not the update is still there and when I try to update it it says unable to install update : an error occurred installing iOS 5.1  ?

    See Here... Unable to Update or Restore...
    http://support.apple.com/kb/HT1808

  • I am told I need to update Flashplayer.  I have downloaded the update 5 times and installed it successfully on FireFox but Safari still says I need to update.  I have gone so far as to restart before re-opening Safari.  What am I not doing?

    I am told I need to update Flashplayer.  I have downloaded the update 5 times and installed it successfully on FireFox but Safari still says I need to update.  I have gone so far as to restart before re-opening Safari.  What am I not doing?

    Enable plug-ins.
        Safari > Preferences > Security
        Web content:
        Is the box next to "Enable plug-ins"  checked?
    Best.

  • Before iOS 7 I had previous ringtones I made from songs I purchased. Now they will not download to updated version. Says error... Why? Can this be fixed? I want my music ringtones back.

    Before iOS 7 I had previous ringtones I made from songs I purchased. Now they will not download to updated version. Says error... Why? Can this be fixed? I want my music ringtones back.

    Hi there.
    Thank you very much for your quick reply, it's really appreciated.
    No need to apologize, I actually found the phrase "If your iPad ever craps the bed" amusing under the circumstances
    I checked the list of installed apps like you suggested (Settings>General>Usage>Storage>Show all apps) but this problem app is not in the list. I have also swiped down on the home screen to search for it, but again it does not show.
    While it has not let me download the app (and I just tried it again) it has helped me to eliminate a few things from the list of what to try, and I can definitely conclude that it has not downloaded.
    I guess I need to fire up my PC and download it / sync my iPad.
    Thanks again for your help

  • ITunes still says I have app updates after updating

    I've been trying to find a solution to this for a while. iTunes will tell me I have a certain app for updating. I'll update it and after updating it still says that app needs to be updated. I've tried to delete the problematic app and re-download the app but it still shows it needs to be updated. The only solution I've found is to update the app on my iPhone and let it sync with iTunes to update it on my mac.
    Does anyone have the same issue and have a better solution?

    This solved my problem.... tnx Vadim Tumanov
    Re: iTunes still says I have app updates after updating 
    Jan 19, 2012 10:54 PM (in response to suprimeau)
    Hi guys,
    I had the same problem that I'v solved doing two things:
    - update all applications on the iPhone
    - go to iTunes and press File -> Transfer purchases from iPhone
    That's it
    Enjoy

  • I have turned firewall off but my iphone will still not update. it still says 'network time out' i am using a dell laptop

    i have turned firewall off but my iphone will still not update. it still says 'network time out' i am using a dell laptop and i want to update my iphone4 to iOS 5.

    Things in this thread might be helpful too.
    https://discussions.apple.com/thread/3382814?start=0&tstart=0

  • I have a macbook pro core i7 mid 2012 And update to the latest version 10.8.4 system after updating the system I have the problem appeared to take off the device and stops at the apple logo for about 5 minutes and then enters the desktop How can I solve t

    I have a macbook pro core i7 mid 2012
    And update to the latest version 10.8.4 system after updating the system I have the problem appeared to take off the device and stops at the apple logo for about 5 minutes and then enters the desktop How can I solve this problem and thank you

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged after the boot, during the time something abnormal was happening. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time, not before. Please include the BOOT_TIME message at the beginning of the log extract.
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

  • I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add

    I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add APN. Now when i switch to safari its showing you are not subscribed for cellular data. But I am able to use data on other phone.
    Will you please help me in this regard?
    Another issue, since i bought my new iphone there is dust inside back main camera.
    Your advises are highly appreciated.

    Hey Shaiju isac,
    I'd take a look at the following article, it'll guide you though steps to you troubleshoot cellular data issues on your iPhone:
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    Cheers,
    David

  • HT1937 my iphone still says No Service after i unlock it

    my iphone still says No Service after i unlock it

    Settings > General > Reset > Reset Network Settings
    Remove and reinsert the SIM.
    Replace the SIM.
    Contact the carrier to troubleshoot the issue.

  • HT1365 How can I get my iPhone 4 to update my updates from my app store of it keeps telling me error 3150 or it tell me to refresh the page after updates and the updates are still there asking me to update them again

    How can I get my iPhone 4 to update my updates from my app store of it keeps telling me error 3150 or it tell me to refresh the page after updates and the updates are still there asking me to update them again?

    Make sure iTunes on the computer is logged into the account on the phone.
    Plug the iPhone in.
    In the popup window warning about wiping your phone, hit cancel.
    In the left pane of iTunes, the phone icon should be there.
    Right click on it, select transfer purchases.
    Note: this will only transfer music bought from iTunes. Not mp3's from amazon or ripped from CD's.

  • HT4759 updated to Lion, from snow leopard after updating all necessary programs & system, recieved emails saying it was successful changing to icloud but can i access iclound No - nothing works! webmail & mail - also reset password.

    updated to Lion, from snow leopard after updating all necessary programs & system, recieved emails saying it was successful changing to icloud but can i access iclound No - nothing works! webmail & mail - also reset password.

    Ok 1st one. The warning restriction message relates to this line in main.cf:
    smtpd_helo_restrictions = permit_sasl_authenticated  permit_mynetworks  check_helo_access hash:/etc/postfix/helo_access  reject_non_fqdn_hostname  reject_invalid_hostname  permit reject_invalid_helo_hostname
    The last reject occurs after the single word "permit" and is ignored.
    However, that's not the problem.
    I'm not exactly sure what's happening, but this might be a clue.
    It would appear that either postfix is not being able to create the socket for private/policy or it's somehow created with the wrong permissions.  You might need to ramp up the debug level to get a better idea.
    You could check if it's being created by "netstat -a | grep private/policy" in terminal.
    My guess is that it's not being created because there is no setup statement in your master.cf file, but I don't understand why postfix would be looking for it if it isn't set up.  Private/policy I think relates to grey listing.  Maybe gives you a hint.

  • Error 1669 after updating to ios 7, Error 1669 after updating to ios 7

    Error 1669 after updating to ios 7, Error 1669 after updating to ios 7

    how to solve error 1669
    STEP 1: Delete iTunes from your computer. Also make sure you remove the cache(open itunes then press edit wich is located on the tool bar and then click on preferences and then go to advanced and click on reset warrnings and reset cache).
    then go to your hard disk and go to program files and delete folder named itunes.
    Note: If you have any libraries or locally cached data that you want to keep, temporarily store them somewhere until you get the situation fixed.
    STEP 2: Once it is completely deleted, download iTunes 11.1 from Apple servers.
    STEP 3: Download iTunes 11.1 from here.
    STEP 4: Now connect your iPhone, iPad or iPod touch to computer.
    STEP 5: Click “restore”, it should present you with a notification saying a new version is available.
    STEP 6: Simply Click download and install, and sit back and relax.
    The process should be completed and your error 1669 should be fixed.

  • I am using i5,updated to ios 7,problem is after updated to ios7 whenever i conncet my phone for charging, at first notification i am getting is "this accesorries is not supported in this device", but phone is charging, before switched to ios7 it was ok.

    i am using i5,updated to ios 7,problem is after updated to ios7 whenever i conncet my phone for charging, at first notification i am getting is "this accesorries is not supported on this device", but phone is charging, before switched to ios7 it was ok, i am getting this notification each time i am connect my phone for charging, or laptop, why i am getting this?

    I am not using extra cable for charging the phone or sync to pc, one cable which came with the phone.it was a full intact box.  Which i use for charging  my phone and also i am using that cable for sync to my pc, when i was using ios 6.1.4 at that time that notification didnt shown up in my phone,it was ok,  when i switched to ios7, i have started getting this notification, my friends are also using i4, i4s, and i5, they are also updated to ios7, but they are not getting the notification which i am getting in my phone after connecting my phone with the cable, so what is the solution? It will be very helpful for me if you give me any plz...

Maybe you are looking for

  • In BSP-HTMLB what is the code for auto refresh.?

    Hi friends, In BSP-HTMLB what is the code for auto refresh.? Means i gave the input every 2 minutes once my output should get refresh. So what is the code in bsp-htmpb? Moosa

  • UWC - Invalid URL after a session timeout

    Using Communications Express 6.3 (122793-12), when a user's session times out their browers is redirected to: http://my.server.com/base/UWCMain?op=logout which generates a 404 File Not Found error. I believe the URL needs to be: http://my.server.com/

  • Pictures and video not showing in lesson 9 of Adobe Classroom in a Book

    I have been doing all the lessons in the book and everything is fine until lesson 9 where I get the "Media offline" note instead of video and pictures.  How can I fix this?  I must have changed some setting by mistake.

  • Printable page in adf

    Hey, I have the "printable page" feature added to an adf table. After clicking on the "printable page" the first time, it opens the printable page ok. Then the user closes the printable page. Now the user clicks the printable page again. Nothing happ

  • Hide reports path

    hi all, I have to hide jobid no in reports path as when I am calling a reports from forms it gives reports jobid in address bar of the browser. is there a solution for this.