Xcode 4 problem in Mac Os x 10.7.3

Hi everyone. I bought today a Mac Os x 10.7.3 and when I install Xcode 4 from the App store, I still don't have the make command. I've reinstall it several times. can anyone help me please?

Actually, it's...
Xcode ▶ Preferences ▶ Downloads ▶ Components ▶Command Line Tools

Similar Messages

I am using Xcode 5 on Mac Book with configuration Memory 5 GB 1067 MHz DDR3 and Processor 2.4 GHz Intel Core 2 Duo. It is getting hanged every time whenever i work on Storyboard. As my storyboard consists of 25 scenes. Please help I m suffering.

I am using Xcode 5 on Mac Book with configuration Memory 5 GB 1067 MHz DDR3 and Processor 2.4 GHz Intel Core 2 Duo. It hangs every time whenever i work on Storyboard and even on clicking on any of the controller it takes time to open. As my storyboard consists of 25 scenes. I searched a lot but did not get any results . I have upgraded my xcode to xcode 5.0.2 which is bug free as compare to xcode 5. Please help I m struggling with this problem a lot.

iTunes for Mac
http://support.apple.com/en-us/HT201693
http://www.apple.com/itunes/download/
Was it installed before? Does it show up in Software Update?
Do other updates show up there (realizing that Lion is not getting all the updates anymore as it is no longer being supported).
Apple Downloads
- Always a place to manual download.
MacBook Pro
Mac OS X Lion System Communities

Problems with Mac OSX 10.5.2 and installing my pro tools le 7.1.1

Problems with Mac OSX 10.5.2 and installing my pro tools le 7.1.1.
My garage band & reason software don´t open anymore giving me a error messasge regarding the midi drivers in the operating system.
Please help!!!
Thanks,
Paolo

Somewhere at either Macworld or here I learned that DVDSP 2, DVDSP 3 and now DVDSP 4 "internally" are major re-writes.
Support for HD among a few other items along with QT 7 which comes with Tiger means sincerely that one set of applications/OS is not going to be stable.
Personally I think of all the issues possible its DVDSP vs QT.
Unless you move to DVDSP v4 the alternative is to wipe the disk and go back to Jaguar (10.2) or perhaps Panther but avoid upgrading QT beyond 6. I advocate wiping the disk because I'n not sure an archive and install to down shift to an earlier version of the OS is possible. If it is I'd still worry about mis-matched files in all sorts of locations.

Hello I have a problem with Mac Pro, iPhoto does not want to stay open and close as I can figure this out? thanks

Hello I have a problem with Mac Pro, iPhoto does not want to stay open and close as I can figure this out? thanks

Refer below link once
App doesn’t open | Progress wheel spins continually

Problem description: mac mail not opening, software updates not working, app store not opening. imac osx 10.9.5

Problem description:
mac mail not opening, software updates not working, app store not opening. 10.9.5
EtreCheck version: 2.0.11 (98)
Report generated 1 December 2014 16:51:49 CET
Hardware Information: ℹ️
iMac (21.5-inch, Late 2009) (Verified)
iMac - model: iMac10,1
1 3.06 GHz Intel Core 2 Duo CPU: 2-core
12 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1067 MHz ok
BANK 1/DIMM0
4 GB DDR3 1067 MHz ok
BANK 0/DIMM1
2 GB DDR3 1067 MHz ok
BANK 1/DIMM1
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 9400 - VRAM: 256 MB
iMac 1920 x 1080
BenQ GL2240 1920 x 1080 @ 60 Hz
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 1:32:17
Disk Information: ℹ️
WDC WD5000AAKS-40V2B0 disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (164.03 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-ST DVDRW GA11N
USB Information: ℹ️
EPSON EPSON Epson Stylus S22 Series
Canon MX410 series
ASMedia AS2105 1 TB
S.M.A.R.T. Status: Verified
EFI (disk3s1) <not mounted> : 210 MB
Backup (disk3s2) /Volumes/Backup : 999.86 GB (506.24 GB free)
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader 7.95 GB
S.M.A.R.T. Status: Verified
EOS_DIGITAL (disk1s1) /Volumes/EOS_DIGITAL : 7.94 GB (7.83 GB free)
Western Digital My Book 1140 2 TB
S.M.A.R.T. Status: Verified
EFI (disk2s1) <not mounted> : 210 MB
2TB (disk2s2) /Volumes/2TB : 2.00 TB (1.50 TB free)
Wacom Co.,Ltd. CTE-450
Contour Design ShuttlePRO v2
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Parallels Desktop.app
[not loaded] com.parallels.kext.hidhook (9.0 24217.979618) Support
[not loaded] com.parallels.kext.hypervisor (9.0 24217.979618) Support
[not loaded] com.parallels.kext.netbridge (9.0 24217.979618) Support
[not loaded] com.parallels.kext.usbconnect (9.0 24217.979618) Support
[not loaded] com.parallels.kext.vnic (9.0 24217.979618) Support
/Applications/Toast 10 Titanium/Toast Titanium.app
[not loaded] com.roxio.BluRaySupport (1.1.6) Support
/Library/Extensions
[loaded] at.obdev.nke.LittleSnitch (4052 - SDK 10.8) Support
[not loaded] xxx.qnation.PeerGuardian (1.1.9) Support
/System/Library/Extensions
[not loaded] com.FTDI.driver.FTDIUSBSerialDriver (2.2.18 - SDK 10.6) Support
[not loaded] com.pctools.iantivirus.kfs (1.0.1) Support
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) Support
Startup Items: ℹ️
ParallelsDesktopTransporter: Path: /Library/StartupItems/ParallelsDesktopTransporter
WkSvMacX: Path: /Library/StartupItems/WkSvMacX
Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
[running] at.obdev.LittleSnitchUIAgent.plist Support
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.CS4ServiceManager.plist Support
[running] com.epson.epw.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
Launch Daemons: ℹ️
[running] at.obdev.littlesnitchd.plist Support
[failed] com.adobe.fpsaud.plist Support
[loaded] com.adobe.versioncueCS4.plist Support
[loaded] com.barebones.textwrangler.plist Support
[running] com.cleverfiles.cfbackd.plist Support
[not loaded] com.gopro.stereomodestatus.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[invalid?] com.tvmobili.tvmobilisvcd.plist Support
[loaded] fi.polar.libpolar.plist Support
[running] fi.polar.polard.plist Support
[failed] xxx.qnation.PeerGuardian.kextload.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.facebook.videochat.[redacted].plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.macpaw.CleanMyMac.helperTool.plist Support
[loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist Support
[running] com.macpaw.CleanMyMac.volumeWatcher.plist Support
[invalid?] com.plexapp.helper.plist Support
[not loaded] com.spotify.webhelper.plist Support
User Login Items: ℹ️
Garmin Express Service Application (/Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app)
SmartDaemon Application (/Library/Application Support/CleverFiles/SmartDaemon.app)
SilverKeeper Scheduler ApplicationHidden (/Applications/SilverKeeper.app/Contents/Resources/SilverKeeper Scheduler.app)
Dropbox Application (/Applications/Dropbox.app)
Garmin ANT Agent UNKNOWN (missing value)
Internet Plug-ins: ℹ️
DirectorShockwave: Version: 11.5.7r609 Support
Google Earth Web Plug-in: Version: 6.1 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 Support
PandoWebInst: Version: 1.0 Support
AdobePDFViewerNPAPI: Version: 10.1.12 Support
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
DivXBrowserPlugin: Version: 2.0 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.239
iPhotoPhotocast: Version: 7.0 - SDK 10.8
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.0.0 Support
AdobePDFViewer: Version: 10.1.12 Support
GarminGpsControl: Version: 4.2.0.0 - SDK 10.8 Support
JavaAppletPlugin: Version: Java 7 Update 71 Check version
User Internet Plug-ins: ℹ️
fbplugin_1_0_3: Version: (null) Support
Safari Extensions: ℹ️
Open in Internet Explorer
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
Adobe Version Cue CS4 Support
DivX Support
Flash Player Support
Flip4Mac WMV Support
GoPro Support
Growl Support
Java Support
MacFUSE Support
MenuMeters Support
Perian Support
Time Machine: ℹ️
Skip System Files: NO
Auto backup: NO - Auto backup turned off
Destinations:
Back Up [Local]
Total size: 0 B
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Excellent
Backup size 0 B > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
      12% Google Chrome
      12% WindowServer
      4% Dock
      2% Little Snitch Agent
      2% SystemUIServer
Top Processes by Memory: ℹ️
399 MB iTunes
322 MB mds_stores
216 MB Google Chrome Helper
193 MB Google Chrome
155 MB com.apple.IconServicesAgent
Virtual Memory Information: ℹ️
6.64 GB Free RAM
3.51 GB Active RAM
1.36 GB Inactive RAM
1.11 GB Wired RAM
1.91 GB Page-ins
0 B Page-outs

[not loaded] com.pctools.iantivirus.kfs (1.0.1) Support
Un-install according to the developer's un-install instructions.
You do not need to use cleaning programs. They can destroy your computer operation as they may already have done.
CleanMyMac - Uninstall
CleanMyMac2 Un-install
After un-installing, run this program to make sure you got all the pieces.
EasyFind – Spotlight Replacement
Do a backup.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Library. Then go to Preferences/com.apple.appstore.plist. Move the .plist to your desktop.
Restart, open the application and test. If it works okay, delete the plist from the desktop.
If the application is the same, return the .plist to where you got it from, overwriting the newer one.
Thanks to leonie for some information contained in this.

Problem: this mac is not reading an excell file after upgrading to yosemite.   My Mac is from 2009, it use to work perfectly but it wasn´t able to open some apps, thats why i upgrade it.   Now it once i donwload the zip it appears with an ".ods" ext

Problem: this mac is not reading an excell file after upgrading to yosemite.   My Mac is from 2009, it use to work perfectly but it wasn´t able to open some apps, thats why i upgrade it.   Now it once i donwload the zip it appears with an ".ods" extension
i even already download a link
http://www.microsoft.com/en-us/download/confirmation.aspx?id=44026
which i read on another support page... but it doesnt allowed me to install it cause it says that i already have the disk of this program....
Im afraid to erase it and not being able to get it back...
What can i do!??
Thanks in advance for this kind answer!!!

fsolution wrote:
Problem: this mac is not reading an excell file after upgrading to yosemite...   Now it once i donwload the zip it appears with an ".ods" extension...
If the "it" refers to a compressed (zipped) spreadsheet that you downloaded, the ".ods" extension is used by LibreOffice and probably OpenOffice (which are free versions of MS Office) for spreadsheets, which would suggest that wherever you're getting that "Excel" file from has switched to one of those programs. I've tried opening an .ods file from LibreOffice using MS Office 2013 for Windows and it does open though with a warning that some things have been changed. I don't know if Office for Mac can normally open .ods files. But if your need is to just open .ods files, take a look at LibreOffice.

After I updated lion to 10.7.4, app store does not recognize my ID APPLE and it unable to connect me to app store in order to update/download apps? What have I to do? I have the same problem with mac mini e mac book air. Please help me!

After I updated lion to 10.7.4, app store does not recognize my ID APPLE and it unable to connect me to app store in order to update/download apps? What have I to do? I have the same problem with mac mini e mac book air. Please help me!

Your advice did not help me. I also installed 10.7.4 combo but the situation is the same.
my internet connection is ok, mail is ok, but app store after 3 resets does not recognize my ID and it says "connection is not possible". Why? I have the same problem in both my mac mini late 2009 and mac book air 2010? Is it a problem of 10.7.4 update? I have to solve this problem and how can i return to 10.7.3 if my last backup was not with 10.7.3???thank you for your kind collaboration...

AD account Login problem with MAC 10.6.8

Hi All,
We have around 50 odd MAC that are connected to windows server 2008 R2. the user were logining in to these MACs using their AD account. Recently few of the random MAC did not allow the user to login using their AD account.When analyzed though the MAC shows that it has connected to the Domain and the server is active with green button it has unbind itself from the server.I had to login in as local user bind the MAC back to get this resolved.
Now the same has started happeneing for most of the MAC that we have and every morning I have login as local Admin and unbind / bind the MAC with the server. this gets reset once the user reboots or shutsdown.
Have tried with few of the below solution but nothing helped:
Solution 1:
<key>mdns_timeout</key>
<integer>2</integer>
The integer value is in seconds; changing it to at least 5 should allow the Mac OS X client to reconnect to the Active Directory domain after a network interruption. In some configurations, a larger timeout value may be required.
You can change this value by using the sudo command and a text editor to edit the preference file directly. Or you can use the Terminal command below, making sure to enter it all on a single line:
sudo /usr/libexec/PlistBuddy -c 'Set :mdns_timeout 5' /System/Library/SystemConfiguration/IPMonitor.bundle/Contents/Info.plist
Solution 2:
I have seen all of the probable solutions and tried everything and still I am getting issues with 10.6.6 and after rebooting the Mac gets unbind. Or the Mac gets Network Accounts Available even when not accessing the list of users from AD. But the thing that I have done that has solved all my issues with AD on the Macs is to uncheck the box to search on all domains. For some reason I am seeing that when the Macs have this option checked, it searches through out the forest on the same domain controller more than once, so AD stops the handshaking of the authentication.
I hope this helps like it did on our Network, since then I have not seen the Macs lose the binding or slow SMB.
If you've tried this please let us know.
TIP: Uncheck Allow Authentication from any domain for Mac AD problems
Wednesday, April 20, 2011
Steven Wells sent a fix and an explanation of problems with Macs losing their binding to Active Diretory:
Unchecking "Allow authentication from any domain in the forest" is working at our college. We have been beating our heads on this for about 2 terms, with no understanding of why it works in some places and not in others. When we found this working, our IT guy said that the Security SID is being duplicated, when it looks in other domain forest, and that is what is causing the problem. This is the first time I have found an explanation for the problem.
If you've tried this approach please let us know.
Solution 3:
Solved it. Create a file in Textedit with the name 'auto_master' (no file extension) with the following contents:
# Automounter master map
+auto_master # Use directory service
/net -hosts -nobrowse,hidefromfinder,nosuid
/home auto_home -nobrowse,hidefromfinder
#/Network/Servers -fstab
/- -static
Place this in /etc/ folder
Hope this helps
solution 4:
TIP: a Kerberos fix for OS X 10.5 and 10.6 binding to Active directory
Friday, November 11, 2011
Mehdi Mafi forwarded a fix he found for problems with Leopard and Snow Leopard binding to Active Directory:
This was taken from Dane Riley's imaging building for DeployStudio.
With Mac OS X Leopard every Mac is now running a KDC (Kerberos Distribution Center). Basically each imaged machine is using the same security certificate and hash. Deploying a single image will deploy the same KDC to every system. This [Apple] article covers how to reset the local KDC so that each system is unique. Basically, do the following:
Launch Keychain Access
Search for com.apple.kerberos.kdc and delete all 3 items
Using Terminal type sudo rm -fr /var/db/krb5kdc
After deployment, perhaps using Apple Remote Desktop to all systems, re- establish the KDC by typing sudo /usr/libexec/configureLocalKDC
If you've tried this approach with Mac OS X 10.5, 10.6, or even Lion, please let us know. .
TIP: More on a kerberos fix for AD binding problems
Monday, November 14, 2011
Mehdi Mafi updated his Friday report about Mac OS X 10.6 problems binding to Active Directory:
You may want to add this. If the Mac keeps unbinding from AD (people can't log in to a Mac), here is how to fix it:
Unbind it from Domain
Launch Keychain Access
Search for com.apple.kerberos.kdc and delete all 3 items
Using Terminal type sudo rm -fr /var/db/krb5kdc
Re-establish the KDC by typing sudo /usr/libexec/configureLocalKDC
Bind it to domain again ( When you bind, uncheck allow authentication from any domain in the forest in: Directory Utilitiy-> Advanced Options\Administrative ) this fix the issue that sometimes it can' find AD under search space.
If you tried this please let us know.
Solution 5:
For Snow Leopard AD login issues, use upper case domain
Solution 6: for .local
To create this StartupItem, create the following directory as root:
/Library/StartupItems/FixADAuth
Then chown it to root:wheel and chmod it to 755. These must also be the owner/permissions on the two files it will contain, below:
Contents of our /Library/StartupItems/FixADAuth/FixADAuth:
#!/bin/bash
. /etc/rc.common
date > /var/log/FixADAuth.log
n=0
AuthSuccess=0
while [ $AuthSuccess != 1 ]
do
id Administrator && AuthSuccess=1 || networksetup -setsearchdomains Ethernet "Empty"; networksetup -setsearchdomains Ethernet middlewich.local; n=$(($n+1))
done
echo Authentication successful: $AuthSuccess >> /var/log/FixADAuth.log echo Operation count: $n >> /var/log/FixADAuth.log
date >> /var/log/FixADAuth.log
Contents of our /Library/StartupItems/FixADAuth/StartupParameters.plist:
Description = "Fixes Active Directory authentication issue";
Uses = ("Disks");
Obviously you'll need to change "middlewich.local" to your own domain name (and the network interface name if your connection is wireless). The script checks to see if it can see the user "Administrator" on the domain, as he's a fairly common bloke, but if you've renamed yours for security reasons then pick another one. I've also included some logging functionality for debug purposes, so you can verify how well the script is working if you need to and time it in your environment before telling the users how long to wait. The /var/log/FixADAuth.log file will contain the date/time the process started, the success variable set to 1 (just to verify), how many DNS operations were required to fix the problem, and the date/time it ended. For us the time difference is normally about +30-40 seconds with around 120-180 operations taking place. Once you're happy with the script, you can strip it down to its bare functionality if you like, like so for us:
#!/bin/bash
. /etc/rc.common
AuthSuccess=0
while [ $AuthSuccess != 1 ]
do
id Administrator && AuthSuccess=1 || networksetup -setsearchdomains Ethernet "Empty"; networksetup -setsearchdomains Ethernet middlewich.local
done
I hope this helps someone!
Regards

You are welcome.
But the question is 10.6 mac just like 10.6.8 , as long as its the same and works.
Yes. You can save some updates by using the combo update.
10.6.8 Combo Updater

Adobe reader download problem on mac. when i try to download reader it says i need adobe air. when i try to download adobe air it says it's no longer available or supported. i deleted the old air because i got a message saying i needed to delete it.

adobe reader download problem on mac. when i try to download reader it says i need adobe air. when i try to download adobe air it says it's no longer available or supported. i deleted the old air because i got a message saying i needed to delete it. what should i do? my operating system is Mac 10.7.5

You don't need Adobe AIR to download or install Adobe Reader.
Try downloading the offline installer from http://get.adobe.com/reader/enterprise/

Hello , how r u, can i ask 1 question about xcode, i have mac os x 10.7.5 , n xcode version 4.6.3 i want build apps for ios 7.1 n mac os 1.9 ,, , but my macbook is old late 2008 macbook 4,1, so can i develop apps for ios7 n 1.9 using xcode 4.6.3, bcz my

hello , how r u,
can i ask 1 question about xcode, i have mac os x 10.7.5 , n xcode version 4.6.3 i want build apps for ios 7.1 n mac os 1.9 ,, , but my macbook is old late 2008 macbook 4,1, so can i develop apps for ios7 n 1.9 using xcode 4.6.3, bcz my machine cant upadte on 1.8 n 10.9,, ihave 2gb ram . core 2 duo pr, plz rely asap,
thnxs

Please type complete sentences and words. This isn't an instant message program.
https://developer.apple.com/support/ios/ios-dev-center.html

Xcode for my Mac 10.6.8

Hello,
I would like to install Xcode on my Mac 10.6.8 but I can not find a compatible version.
Can you give me the download links ?
Regards,
Marion

I would like to install XCode 5 for my 2008 MacBook 4.1, White, 13.3", 4 GB RAM, 500 GB HDD, Snow Leopard 10.6.8. Plenty of horsepower to run XCode but can't install because it requires Mountain Lion 10.8.4 which won't install as an update for some reason (system specs should be able to handle the OS update as well)??

Hello i have a problem my mac butoos up but cant get to move de curser with the trackpad or external mouse please help

Hello i have a problem my mac butoos up but cant get to move de curser with the trackpad or external mouse please help

Try a PRAM reset.
Instructions here > Resetting the PRAM

Email Problem with Mac

Hi, I am new to FIOS so I hope this is the proper board to post in. I set up 2 subaccounts for verizon.net email and configured them for my Mac Mail program. Everything worked well for about 2 days, and all of a sudden the Mail program keeps asking for my password (even though it was saved in my Mail settings) and says the the incoming mail server is offline. I've Googled this issue and see that others have posted about the same authentication error. Has anyone else here experienced - and solved - this problem? Thanks.

I am having the same problems with Mac eMail. I have two Macs, one that is running Lion and the other is running Snow Leopard. I have spent days on the phone with Apple and Verizon and they are blaming each other and neither have a solution. Have you been able to get a response? It looks like this is something that happens from time to time but never really gets fixed.
Please let me know if there has been a fix since the Mac Mail update in July? With the Union Issues Verizon doesn't have enough people to address the issues both in person ( I had a tech come to the house and he didn't know anything about software ) or on the phone. They keep kicking it back to Apple. I also have a couple iPhones and both are working fine. So this seems to be OS X specific. I've had Macs and iPhones for 3 years or more.
Just makes me think something was done to the mail servers they didn't get correct.

Problem with Mac Office Password Protection

I'm running Mac OS X 10.7.5 with MS Word for Mac 12.3.5 and MS Excel for Mac 12.3.5.
I created a Word (.docx) and an Excel (.xlsx) document on my Mac at home, both with password protection. I uploaded the documents onto Google Drive. I was able to open the documents a few times with the password on my Mac at home, and on my PC at work. However, now upon opening the docs, Word and Excel say the password is incorrect (both home MAC and work PC).
I know I'm entering the correct password. I'm 100% positive. I was able to open the docs a few times previously just a day before. Now they're completely inaccessible. My questions are:
(1) Is this a common problem with Mac for Word/Excel docs?
(2) Are there ways to recover the password (a dictionary based brute force solution is unlikely to work, as I use non-word passwords with numbers)?
(3) If this is a common problem, are there other alternatives to password protecting or encrypting Mac for Word and Excel docs that don't cause problems?
Any feedback is greatly appreciated. Thanks.

Could just be thats the way it runs on Rosetta. I called in apple to ask if I could return office '04 because I didn't want to take the chance, they were more than eager to return it for me because of the fact it would be slow/maybe have problems running in Rosetta.
I just got iWorks instead till the universal version of office comes out (which if you buy office '04 you'll have to buy the new universal version as well, or so the rep told me).

Problems booting Mac color

Hello
Problems booting Mac color
I'm a Mac Pro models: MD 313
System OS: Lion 1.7.4
My Mac Index (before Apple logo) is blue. I need to be gray?
Or has a problem with my Mac?
Please please help? I'm worried.
Please help with your photos.
Thanks

Does it boot?

Problem under Mac OS X with very long commands

Hi,
in one app. I have very long commands, this make problems under mac os x (sdk 1.4.2)
it works under Lin and Win, only under Mac OS X it wont work like it shoud.
is there a possibility of arise this "max length" ?
sample:
http://matrix.phileon.de/java_mac.html
thx!
phileon

It seems as he didn't like the last entry of the classpathhuh, i always thought of MacOS X as a she..

Xcode 4 problem in Mac Os x 10.7.3

Similar Messages

Maybe you are looking for