Xcode 6.1 is remove when upgrade os x yosemite

When i have upgrade os x yosemite in my mac mini at that time xcode 6.1 is remove from my mac

FANTASTICO! Ho perso ore e ore per capire cosa fossi successo...invece, era una cosa semplice...Grazie! Agli maici italiani che hanno aggiornato il loro mac a OS 11 e riscontrono problemmi in illustrator cs 5.1, cioè non vedono i fonti, questa tua risposta è un solievo illustrator CS5.1 Font Preview fails with OS X Yosemite upgrade

Similar Messages

What do I do if my F-Secure security product is partially removed when upgrading to Windows 10?

QuestionWhat do I do if my F-Secure security product does not work after upgrading to Windows 10?
AnswerOnce you have completed your Windows 10 upgrade, you may experience the following with your F-Secure security product:
Your F-Secure security product does not start up.
On your computer, you can't find the F-Secure security product icon in the system tray at the bottom of the screen.
Your F-Secure security product does not show up in the list of installed apps and features in Settings > Systems > Apps & features.
If this happens, it means that the Windows 10 upgrade has unfortunately removed some of the F-Secure security software components, and the product fails to start up as it should.
To get your F-Secure security product working normally again, the F-Secure security product needs to be removed from your computer, and the product reinstalled. To do this:
Download and run the Uninstallation Tool for Windows. You can download the tool here. The instructions for the Uninstallation Tool for Windows are here.
Reinstall the F-Secure security product on your computer. You can download the product from the F-Secure website or from your My SAFE account, depending on your subscription.

Thanks but the tool only works if you have one working windows installation and it's designed for mult-boot systems. I don't have a multi-boot system and when the Windows 10 upgrade fails there is no active working Windows install to turn to. The partition gets corrupted and has a "RAW" status until you run chkdsk with gets it back to "NTFS" status but it won't boot. My only two options at this point is to restore back to an image backup or install Windows 7 all over again. I'm just going to give up on this HP laptop, to me it's just not compatible with running this upgrade, so unless someone else has any other ideas this attempt to upgrade is over. Thanks again

When upgrading to OSX Yosemite do all my programs and files transfer over such as Office for mac, saved documents from word,excel,pics,pdf files,etc.etc...

Will all my files transfer over (or stay) automatically right after upgrading to Yosemite or do I have to backup every single desired program or document? Question is do I HAVE to please if you can answer if its mandatory or not. Not looking for recommendations that I SHOULD back up or anything like that just want to know if it is mandatory to perform a backup to be able to keep or transfer all my current programs and apps and documents currently on my MB Pro Retina.

Yes, upgrading to Yosemite will not touch your 3rd party apps or files in the Home folder.
Although not mandatory you should have a a backup of your hard drive regardless if you upgrade to Yosemite or not. To not have a backup is just playing Russian roulette as there are only two types of hard drives; those that have failed and those that will.

Hello, When upgrading Iphone4 error-1.How to remove it? thank you

Hello, When upgrading Iphone4 error-1.How to remove it?
thank you

This is a bad Hardware Error, most often means Baseband Problem. Maybe try to Restore Firmware with SIM Card removed. If you still have Warranty or AppleCare Coverage take iPhone to Apple for resolution.

When upgrading or downloading certain apps, my iPhone 5C is asking for a password to an account that's not even mine. I want this removed.z

When upgrading or downloading certain apps, my iPhone 5C is asking for a password to an account that's not even mine. I want this removed.

It will be an App that you personally did not buy using your Apple id ( an App purchase locks the App to the Apple id used to buy permanently, to prevent piracy )
Next time you get the message check which Apps are trying to update ,it will be one or all of those Apps

HT6114 My Mac Book Pro had a split drive with Windows Microsoft Access on it and it was removed when Mavericks installed. I need this so how can I go back to the old system?

My Mac Book Pro had a split drive with Windows Microsoft Access on it and it was removed when Mavericks installed. I need this so how can I go back to the old system?

Restore from the backup you had prior to installing Mavericks.
However, the upgrade should not have altered your partition scheme. Did your erase and format the drive prior to upgrading?

Receiving a -43 error message when upgrading to ios5.

How do you get past error code -43 when upgrading to ios5 on ms vista??

The only solution that I've found was here
http://gizmodo.com/5849160/the-complete-guide-to-updating-to-ios-5&rct=j&sa=X&ei =bnaWTrPYKYekmQXR9_WFAg&sqi=2&ved=0CCoQ-AsoADAA&q=iphone+ios+5+error+-43+when+ba ckup&usg=AFQjCNGGVjsr_rky-tiplqdj-1fBfXofPA
and here
http://www.macworld.com/article/162925/2011/10/how_to_upgrade_your_ios_device_to _ios_5.html&rct=j&sa=X&ei=bnaWTrPYKYekmQXR9_WFAg&sqi=2&ved=0CC4Q-AsoATAA&q=iphon e+ios+5+error+-43+when+backup&usg=AFQjCNEBBPx-ymDJPGPd-sBy8TZ1dDTbeQ
by:
1. Doing backup.
2. Using the Restore button and following the
All works fine now and all the settings are there.
BTW: it took over 2 hours to restre and that is with lots of apps and without songs, phothos and movies... that I removed before.Gizmo link above.

Error in "tempInit" when upgrading Flash MX AS2 FLA to Flash CS6 AS3 FLA

I experienced a compiler error in "tempInit" when upgrading an AS2 project to AS3. "tempInit" is something internal to Flash Authoring, because it doesn't exist in my project and other people have gotten the same error.
I've read about this problem, and everyone thought it was because of an instance with a bad name, such as one that includes spaces or equals a keyword or something like that, and people have shot down the idea that the problem is with the library symbol, but I'm convinced now that it's a corrupted library symbol. Here's why:
I had 8 instances of a particular movie clip on stage, each on a different frame.
When I deleted the symbol from the library, the compiler error went away (but so did my stage instances). So that simply tells me that the problem is with that particular clip (I originally had to delete each clip in my library one at a time and recompile to determine the offending clip), but that obviously didn't rule out the name problem since the stage instances get removed when I deleted the corresponding library symbol. Still, I knew it couldn't be a name problem, because all instances had a valid name "mainidea".
I ruled out the name problem by creating a new library symbol identical to the first (it's just a few text fields with a rectangle drawn around them). Without changing the names of the existing instances on stage, I used the "swap" button to swap in the new library symbol. The use count on the old one dropped to zero, and the use count on the new one went up to 8. The compiler error was gone, and it only went away once the use count for the old symbol was zero.
The old and new library symbols are identical as far as I can see. Same child objects at the same positions, same textfield content, same child instance names, no ActionScript code, etc. Since there was no discernible difference, I came to the conclusion that the original library symbols had somehow been corrupted under the hood, somewhere in the pipeline between opening an old Flash MX file and setting the flash player version to 11.4 and selecting AS3 as the script language. Somewhere in that process, the Flash Authoring environment screwed something up. Does anyone know anything about this problem?
I have hundreds of files I need to upgrade, and that symbol was copied to each of them as they were created years ago, and I think I'm going to experience this problem with all of them. It's time-consuming to duplicate the old symbol and replace all the instances for every single file, so I'm trying to find the source of the problem and a workaround to avoid it.

It works, but slowly as if somer AS1 code is interpreted into
very
ineffective machine code by AS2 interpretor
My question was if it is know which particular AS1 features
have these
problems in AS2
"ggshow" <[email protected]>
ÓÏÏÂÝÉÌ/ÓÏÏÂÝÉÌÁ
× ÎÏ×ÏÓÔÑÈ
ÓÌÅÄÕÀÝÅÅ:
news:f17r79$efu$[email protected]..
> some AS1 not working when the movie run in AS2...
> if you want to publish it as AS2, then write it in AS2.
>
> * it is time to learn AS3
>

BPM 11g - Human task not removed when interrupting boundary event fired

In BPM 11g (11.1.1.1.3), I am testing a message catch event on the boundary of a human task. It is set for interrupting, so it should, when the event fires, remove the human task from the work list and follow the flow out of the event. The event flow is being followed, but the human task is being left active in the user's work list. I would expect the human task to be removed when the interrupting boundary message event occurs.
I think this is a bug, but would welcome any suggestions on how to solve it. Does anyone know if this works in the latest release (11.1.1.1.4)? We might upgrade pretty soon. Has anyone else tried boundary message events and gotten them to work properly in BPM 11g?
Just FYI....in order to make the BPM message event occur and provide instance correlation, we had to add a mediator and BPEL correlation. We followed process documented in a previous post to do this (http://blog.andrade.inf.br/2011/01/implementing-correlation-in-bpm-11gr1.html). Thanks to whomever posted that...it got us a few steps further along!

I do not think this is bug based on
Oracle® Fusion Middleware Modeling and Implementation Guide for Oracle Business Process Management
23.1.1 Understanding the Relationship Between SOA Composites and SOA Components
"In a similar way, when an interrupting timer or message boundary event arrives to a user task, the BPMN process instance leaves the user task but the associated Human Task remains available. Because the interrupting timer or message boundary event arrived before the user completes the user task, the human task remains unfinished, and you can still access it thought the Worklist application. However running that human task does not have any effect on the BPMN process."
This also gives us big trouble. I am looking for the solution.
Helen

What do I do with F-Secure Freedome when upgrading to Windows 10?

QuestionWhat do I do with F-Secure Freedome when upgrading to Windows 10?
AnswerWhen upgrading your operating system from Windows 7, 8, or 8.1 to Windows 10, you can choose to:
Keep your programs and data through the Windows 10 upgrade (Recommended)
If you choose to upgrade to Windows 10 whilst keeping your programs and data, the Freedome application does not get removed and continues to work normally after the upgrade.
Make a fresh (clean) Windows 10 installation
If you choose to make a fresh (clean) Windows 10 installation, you will need to reinstall Freedome after the Windows 10 upgrade. Do note that this method of upgrade requires you to type in a new subscription code as every installation of Freedome uses one of your available subscriptions.
Note: If you have had an expired trial subscription of Freedome on your computer before the Windows upgrade, it will remain expired after Windows has been upgraded. This applies to both the Windows upgrade methods mentioned above.

Thanks but the tool only works if you have one working windows installation and it's designed for mult-boot systems. I don't have a multi-boot system and when the Windows 10 upgrade fails there is no active working Windows install to turn to. The partition gets corrupted and has a "RAW" status until you run chkdsk with gets it back to "NTFS" status but it won't boot. My only two options at this point is to restore back to an image backup or install Windows 7 all over again. I'm just going to give up on this HP laptop, to me it's just not compatible with running this upgrade, so unless someone else has any other ideas this attempt to upgrade is over. Thanks again

How i can have all my opened tab when upgrade my firefox?

now i'm still using very old Firefox 3.6.12, and i want to upgrede it. I always using "save and quit" to my all opened tab when quit and not using bookmarks. total about 300+ tab opened.
i already try upgrade once and all my tab is lost. and because of that i do system restore and reintall with old one again.
how i can have all my opened tab when upgrade my firefox?
sorry my english is mess....

I do not think anything much has changed with the Firefox system restore files and how they are handled so it may be possible to keep these and use them after an upgrade in a new version of Firefox.
It is '''very important that you backup the Firefox profile''' see
*[[Back up and restore information in Firefox profiles]]
If you do that you will be able to use the open tabs again. <br />(May need to reinstall Firefox 3.6 again possibly as an additional browser) <br />
You must
* Put that profiles somewhere safe. NOT in the Firefox profile or program path. Your Window's Desktop is ok as a safe place.
*When needed. Only work with copies of those files. Keep the original files and folders safe.
Upgrade to the latest Firefox. Because you are going up so far from 3.6 to 27 do this by installing the new Firefox 27. Do not try using each upgrade step from 3.6 to 27.
Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
More information about reinstalling Firefox can be found [https://support.mozilla.org/en-US/kb/troubleshoot-and-diagnose-firefox-problems?esab=a&s=troubleshooting&r=3&as=s#w_5-reinstall-firefox here].
WARNING: Do not run Firefox's uninstaller or use a third party remover as part of this process, because that could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. <br />These cannot be recovered unless they have been backed up. <br />(That is why I asked that the profile was backed up FIRST)
You may be surprised and find Firefox still has the old tabs once it is reinstalled.
Post back with how you get on. We should be able to get access to the old tabs again.
In future I suggest you do not try to rely on keeping 300 tabs open all the time without bookmarking them. You will at some stage probably lose some or all of these tabs, or their related states and history.
Please in future
* Backup your profile on a regular basis.
**Once a week means you may only lose one week's open tabs.
*Bookmark important open tabs.
** Bookmarks keep well.
** Open tabs do not keep well & may be lost.
* If possible reduce the number of open tabs you use.

Why display hanging and software problem when upgraded to ios 8

Why display hanging and software problem when upgraded to ios 8

Hi Redhazel,
Thank you for using Apple Support Communities.
To troubleshoot this issue where you're experiencing a poor image quality with your iPhone's camera, please follow the troubleshooting below.
Camera isn't functioning or has undesired image quality
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
iPhone: Hardware troubleshooting
Cheers,
Alex H.

HT1926 Error message when upgrading QuickTime.

I keep getting the error message "QuickTime has an invalid signature. The download has been removed" when I start the upgrade process. Anybody else seen this? What should I do to fix this?
Thanks, Barry.

Try updating using a QuickTimeInstaller.exe installer file downloaded from the Apple website:
http://www.apple.com/quicktime/download/

Problems with pacman when upgrading to xorg7

I decided to try and update from xorg-11R6.8 to 7 tonight, after hesitating for a while. I saw all the bug reports and problem threads, and I still can't understand why something that results in so many bugs has been released. It doesn't seem to comply with the KISS principle, either, but who am I to judge?
Anyway, my problem is this:
When I try to install the xorg components, I get the following message in my terminal. After checking the packe intergrities, it'll go to install the first package and then show this:
load_pkg: missing package name in /var/cache/pacman/pkg/libxkbfile-1.0.1-1.pkg.tar.gz.
After removing xorg-11R6.8, it will do this for any package I try to install, whether part of the new modular xorg or not.
If I do a "pacman -U /var/cache/pacman/pkg/xorg-11R6.8.2-6.pkg.tar.gz", it works fine again.
I've read through the Xorg7 wiki entry and there's no reference to this problem.
Any way to solve it?
Thanks in advance.

That didn't really help, either.
Apart from a fresh install, is there anything I can do to just sort out all these stupid problems in one go?
When I try and upgrade to xorg7, I get all these messages about missing object files and libraries, complaints from /sbin/ldconfig about the nvidia module being empty, all this other crap too; it seems like a different thing broken every time. When I downgrade to xorg-6.8, fluxbox comes up and works, but when I go to upgrade anything else with pacman, I just get the load_pkg errors or whatever else.
I've tried editing my /etc/X11/xorg.conf file to the new xorg7 paths when upgrading to xorg7, but it makes no difference.
I don't understand how something that's supposed to simplify Arch could break things for so many people, =

Removing an Upgrade

Hi
I have a 12" G4 Powerbook and was running Final Cut Pro V.4. I upgraded to V.5 but near the end of the installation i ran out of space on my disk drive, which meant the upgrade used atleast 35GB. At the end a window opened up which said to re-install as there was an error (it ran out of disk space). So now i have Final Cut V.5 opening up when i open the Final Cut application, zero available drive space and i dont even have the full V.5 loaded.
Can i remove the upgraded version and leave V.4 as it was? That is can i restore my drive to 1 week ago before i tried to upgrade?
thanks for any help
Danz5050

Dan:
Welcome to Apple Discussions.
Can you give a bit more information about your computer system?
Which 12" PB do you have?
How much RAM do you have installed?
What size is your HDD? (I guess I don't have to ask about free space:-(
35 GB seems an unusually large application. Here are the specs I found:* 4GB of disk space to install all applications
* Additional 42GB to install all optional templates, loops, content, and tutorials (may be installed on separate discs)Which means that the optional templates etc. are taking up a lot of your limited disk space.
Here's what I suggest:
You might try deleting some of the extras, or installing them on an external FW HDD or on separate discs. Your best bet is to install a larger, faster internal HDD (although I don't know your HDD's specs). Uninstalling will likely run into the same issue again if you don't have the disk space.
Take a look at Dr. Smoke's FAQ Uninstalling applications for ideas on uninstalling.
Good luck.
cornelius
Message was edited by: cornelius

Xcode 6.1 is remove when upgrade os x yosemite

Similar Messages

Maybe you are looking for