Xcode Can't Create Projects

Yesterday I tried to create a new C++ project, but Xcode gave me a cannot-create-project error. When I looked at where the project folder was supposed to be, though, it was there and it seemed fine, so I tried to open it, but Xcode said that the project file couldn't be parsed. Today the option to create a C++ project has disappeared completely, though when I look in ~/Library/Application Support/Developer/Shared/Xcode/Project Templates/Application, the template is still there. What's going on and how do I fix this?

OMG so many questions lol
K T asked:
What version Xcode?
v3.2.5, Intel / 64-bit
K T asked:
What is the path to the installed location?
/Developer/Applications/Xcode.app . I think it's the default; it should be in any case.
K T asked:
Did you move anything outside of /Developer?
Um, no? I did create custom project and file templates, but those are at ~/Library/Application Support/Developer/Shared/Xcode/Project Templates and ~/Library/[…]/Xcode/File Templates , respectively. /Developer should be at its default state plus updates. If need be, I can Time Machine it back, or even nuke it and reinstall from the Snow Leopard install disc.
K T asked:
How much free space on your HD?
Plenty. 8.71 gigs according to the Finder; the readout seems to be staying the same, but it always varies a bit from my experience due to scheduled syncs, etc., so assume ~8 gigs to be safe.
K T asked:
Using FileVault?
Not on this computer. I do sync most of my entire home folder (Developer folder included) with its counterpart on two other computers (of which one uses FileVault) , however.
One more thing to note is that I did edit the .xcodeproj file in the template a bit. However, I tested it several times while I was editing it, and once more afterwards by creating a new project. All of these tests worked fine, and I still have that project created with the template with the modified .xcodeproj file. There are no problems with parsing any of the files. I thought one of my automatic syncs might have corrupted the template .xcodeproj file, so I Time Machine'd it back from a known-good copy, and tried to create a project, but got the same error.

Similar Messages

Web Service Import Error - Can't Create Project Library

Hello,
I'm haiving an issue importing a particular .NET web service using the import wizard. I'm running .NET 2.0 framework and LV8.2. I have followed this tutorial and successfully got a few simple services working. I can successfully import an use simple web services like this one with no issues, but when I attempt to import a local web service I keep experienceing the same error at the end of the import, the error is:
The following errors/warnings occurred when generating the local proxy dll and VI wrappers for this web service.
Can't Create Project Library.
Project Library Generation Failed.
Possible Reasons:
1) The imported project library has a conflicting name with a project library already in memory.
2) The imported VIs have conflicting names with VIs already in memory.
Close the project library and VIs and reimport the Web Service.
ionService.lvlib
I seriously doubt that the error is actually caused by 1 or 2, I think this is just the default message for some other error. I have cleaned all previous failed projects from the userlibs and opened and closed the program, restarted etc... I have also tried this and got the same error with another machine running .NET 1.1 and LV8.2, same error.
The service's WSDL page seems to be working correctly, LV sees the availble functions and lists them correctly for import, it just always fails when creating the DLL wrappers.
I have included the WDSL XML file for reference.
Anyone have any ideas for fixing this?
Thanks,
Adam
Message Edited by ajckson on 05-20-2008 04:27 PM
Attachments:
WSDL - XML.zip ‏2 KB

Hi Adam,
Some of the functions in your project library may have the same names as some of the inbuilt functions in LabVIEW or any loaded functions in the memory.
Try closing down all other programs and see if it works.
What are the names of the functions you are using?
You may have to rename them to remove the naming conflict, but you did mention that you don’t think that it’s because of one of those reflected conflicts!!
SubVIs being generated may have the same name as some LabVIEW inbuilt functions which may be causing the problem.
Could you please provide the header file to see the names of the functions?
Hopefully this helps!!
Aashish M
Applications Engineer
National Instruments
http://www.ni.com/support/

Webservice: Can't Create Project Library

I'm using the Wizard for importing a webservice. Everything works fine until I try to generate the VI-library. I always get the following error:
.NET Web Service Proxy Tool Report for Web Service: iptocountry
Mittwoch, 24. Juni 2009 18:14:23
Web Service URL: http://www.ecubicle.net/iptocountry.asmx?wsdl
The following errors/warnings occurred when generating the local proxy dll and VI wrappers for this web service.
Can't Create Project Library.
Project Library Generation Failed.
Possible Reasons:
1. The imported project library has a conflicting name with a project library already in memory.
2. The imported VIs have conflicting names with VIs already in memory.
Close the project library and VIs and reimport the Web Service.
iptocountry.lvproj
Can't Create Project Library.
Project Library Generation Failed.
Possible Reasons:
1. The imported project library has a conflicting name with a project library already in memory.
2. The imported VIs have conflicting names with VIs already in memory.
Close the project library and VIs and reimport the Web Service.
iptocountry.lvproj
Cannot generate C# assembly.
Error message from C# compiler:
Die Quelldatei C:\Windows\TEMP\q246tgvj.0.cs konnte nicht gefunden werden.
Es wurde keine Eingabe vorgenommen.
I tried the following:
- closing all open VIs and LabVIEW projects
- closing all other programs
- restart the PC
- different Webservices
Nothing helped. It also must be possible to program the wrapper VIs manually. But I didn't find any useful example code anywhere, and the documentation about webservices with LabVIEW is very poor.
Thaks for every help!
David

Hi Adam,
Some of the functions in your project library may have the same names as some of the inbuilt functions in LabVIEW or any loaded functions in the memory.
Try closing down all other programs and see if it works.
What are the names of the functions you are using?
You may have to rename them to remove the naming conflict, but you did mention that you don’t think that it’s because of one of those reflected conflicts!!
SubVIs being generated may have the same name as some LabVIEW inbuilt functions which may be causing the problem.
Could you please provide the header file to see the names of the functions?
Hopefully this helps!!
Aashish M
Applications Engineer
National Instruments
http://www.ni.com/support/

Can't create Project from the Template or access project template

Dear Experts,
We are facing a issue while trying to access the project template/create the project from project template.
we have 4 project template in place and of these two are working perfectly fine but
From remaining two we are not being able to create project and even templates are not accesible , whenever we are trying to access the project template system rotates a circle for some time and keeps us on the same page.
Even when we are trying to create project from the same template, system does the same again rotates the circle for some time and keeps us on the same screen.
And System is not throwing any error for the same (we have checked in the log as well) just not letting us in and not allowing us to create project.
Any Help Will be Highly Appreciated.
Regards,
Rakesh Daiya

Dear Experts,
We were able to find out the issue,
We added 3 groups to the template with "Reviewer" access with "Document Only" Type in the project template.
When we changed the type to "Template and Document" from "Document Only" and system started allowing us to create projects from the template.
Can anyone please help me with one query,
Can we add a group(which includes all the buyers) with reviewer access and with Document only type?
Does this really be a reason behind projects are not getting created from template?
Any help will be appreciated
Regards,
Rakesh Daiya

Can't Create Projects

I plug in my point and shoot camera, via USB and my iMovie doesn't see the camera is plugged in. I also can't create events, unless I am totally missing the point. How do I create an events? I have done this before but it was very long ago.

Got it. Thanks

Xcode: Can I create a flag visible to code on a per-configuration basis?

Hi all,
I want to be able to create or change some flag in a build configuration, so I can do something like this in my code:
#ifdef (configuration flag)
// add some code
#endif
The idea is that I want to include some code in one configuration, but strip it out completely (don't even want to compile it) for another.
I looked at the various build flags available in my project -> Get Info window under the Build tab, but between browsing that and scanning various Xcode docs, it's not clear how to do this.
Any suggestions? Thanks.

You can do this via preprocessor macros.

How can I create projects larger than 7GB?

I want to creat a project and it will be very large... over 10GB. I know that because I finnished only two thirds of it and it already 7GB size (I get the warnning message all the time)
Is there any way to create a larger projects? I dont want to burn it on a disc... I just want to save it as an image file, and play it from there...
If there's a way to make my project smaller so it can fit a Dual-Layer disc will also be a bless...
Thank you all!!
Naor

Yes. It is not the size in GB of your project. I have had many projects that were between 60 and 100 GB, but under the time lime.
It is theTIME limitation that iDVD is complaining about to you. A single-layer DVD can hold 120 minutes of content, including menus and submenus. A double-layer DVD can hold twice that much, 240 minutes total. Your project exceeds the capacity of even a double-layer DVD because it is too long to burn on one DVD.
To burn DVDs with that many minutes, you will need to split your project and burn it to two DVDs, so that each part is not longer than 240 minutes total time. This is the same for creating disk image files. They cannot exceed the total time limits.
I have seen reports of supercompressing data using Toast, so that you can fit more content onto a disk, but I have not used it this way, and I think you are probably trying to put too much onto one disk even for Toast. Maybe others have done this and can give your their experiences with Toast's limitations.

Could you explain me, how can i create project in Primavera using BPM 11g

I found an example of workflow here, but I can't repeate it:
http://www.oracle.com/technetwork/indexes/samplecode/primavera-1551981.html
I opened an example in BPM, and found that most of external references are "Web service". Could somebody describe me main steps of creating a Project in Primavera using Workflows or could you give me a link to tutorial.
Thanks a lot for help.

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the libxml2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "libxml2.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "libxml2.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck

Can't create projects with loops longer than 1 second

This is weird - In garage band, if I try to drag and drop one of Apple's pre-made loops into a new project and that loop is any longer than one second I will get the following error message:
Result Code = -5000
File = GarageBand-Temp-21B25E84.tmp
(the temp file name, of course, changes each time)
I have used GarageBand for years with no problem. I have upgraded to Lion a couple months ago. However, I have also upgraded GarageBand. Currently running version 6.0.4 (427.84).
Very frustrating. Anybody have any ideas how to resolve?

Finally called Apple and got it figured out
1. Went to a new user and tried creating a GarageBand song there. That worked so isolated that it was some kind of problem with the user account
2. Went back to user library and looked at Preferences again. Threw out all of the following (which I had done previously)
com.apple.garageband.cs
com.apple.garageband.LSSharedFileList.plist
com.apple.garageband.LSSharedFileList.plist.lockfile
com.apple.garageband.plist
com.apple.garageband.plist.lockfile
Also threw out (which I had not done previously)
com.apple.iApps.plist
com.apple.iApps.plist.lockfile
In the process found a bunch of other files that Apple thinks were created in error during upgrade. All started with com.apple.iApps.plist.xxxxxxx (X's represent random alpha numeric sequences). Threw those all out
3. Also, in user library, went to Caches and threw away com.apple.garageband.
4. Restarted computer
Problem solved.

How can I create projects with identical settings?

Hi,
I'm using FM10 and RH9 and have just completed my first project of generating WebHelp output
from a framemaker book. Hopefully, completed subeject to feedback...
I now have three other manuals to produce, much larger and more detailed, but with almost
identical settings. What is the easiest way to ensure that I keep all the settings I've made in
RH in the new projects, without duplicating all the effort. Could anyone pass on any tips please.
Also, can anyone let me know if there's anything I should be careful to avoid when trying to
duplicate settings for projects.
Many thanks in advance & best wishes,
Karen
PS Apologies for the duplicate posting, have just been advised this would be better here than in RH HTML.

And now, for an answer to the question!
Basically you would just copy your desired project to a new folder. Then rename it. Then you would re-link to the new Frame stuff and do as Jeff suggested and use an ISF. (I think)
I'm a bit confused with the ISF bit, so others will have to guide you on that aspect.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Can't create events

Hi,
I am using iMovie 2011, on a Macbook Air late-2012 with Mountain Lion 10.8.2. I can't create events or projects in iMovie. I am getting the following error message :
Can't create event.
The import was canceled. You may not have permission to write to /iMovie Events.localized.
It seems to think that the "iMovie Events" folder is in the System root. In fact, if I create a folder in the system root (bad practice), it works, but then I can't create projects. Creating a folder called "iMovie Projects" in the system root doesn't work because iMovie can't write to the folder. Now, I don't want either of those folders in the system root, I want them in ~/myusername/Movies, like they're supposed to be. I don't know why iMovie thinks they should be in the system root. Is there any way to reset this setting? I have tried deleting iMovie pref files, reinstalling iMovie, etc. but nothing seems to work. Any ideas? Thanks,
C.

I would suggest calling Apple at the Contact Us link at the bottom right of this page. Your MBA should be still under warranty, so the call should not cost you anything (but verify).

Can't create data analysis views in windows 7/project server 2007

In Project Server 2007, when trying to create a new Data Analysis view or edit an existing one, we get the following error: "An error was encountered in loading the page". Using the F12 developer tools, I tracked it down to the following line:
"cn = new ActiveXObject("ADODB.Connection"), and in javascript the more specific error is "Automation server can't create object".
I assumed it was a browser permissions issue, and so I ensured the site is in trusted sites, and set the security level to low, but the same error is still occurring.
This error only occurs for users who are on Windows 7. This page works fine for users on Vista. The Windows 7 box has IE 9, the Vista box has IE 7.
Is Project Server 2007 supported in Windows 7/IE 9? Is there another security setting to look for?
edit: I have also checked the registry on the client and confirmed that adodb.connection is registered, and the dll exists.
Thanks,
Mike G.

Hi Mike,
If you refer to
this link, IE9 is supported by PS2007. Anyway, in the F12 developer tool, try to set the default browser to IE8. Also add the PWA url to the compatibility site settings in IE.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

How can i create link between ipad(xcode) and webserver?

Hi, I'm a new to iPad development and i need help,
i'm not good with english but i try to explain my question:
how can i create link between ipad(xcode) and webserver?
(the webserver ".NET" with driver odbc is connected with DB Oracle)
so, how can my ipad application access to the Oracle DB?
Create a webservice (.NET) to be place between iPad and DB, is this correct?
how can i do it?
which are libraries to include in the xcode's framework?
thx

I think the following URL will be your best answer:
http://stackoverflow.com/questions/3510468/connecting-iphone-to-an-odbc-database

How can I create multiple versions of a video within the same project?

OK...this is a probably a very basic question but I'm not sure how to word it clearly.
How can I create multiple versions of a video within the same project? What I mean is that I have a bout 50 minutes of video and I want to make two DVDs using different clips from this original 50 minutes of footage. It would be a real pain to have to re-import the video AGAIN for the second DVD. I suppose I could drop anything I don't want to burn to DVD back into the clips pane but that would wipe out all my transitions wouldn't it? I want to save each project in their “raw” form so I can burn additional DVDs later otherwise I would just do them one at a time and not care about one of them being destroyed.
Wow...that was a mess. Does anyone understand what the heck I’m asking? I hope so.

How can I create multiple versions of a video within the same project?
You can't. You make separate projects using the same or different clips, segments, transitions, titles, etc. You can even duplicate the first project and then modify/make the desired changes in the duplicated project. Each project can then be burned as a different DVD or as different titles on the same DVD if there is enough room.

How can I create a URL for a PWA for MS Project Server 2010 project file that includes the view?

Hi, this question has been answered for 2013. The answer here suggests that it can be done in 2010.
See:
http://social.technet.microsoft.com/Forums/projectserver/en-US/3affdc4f-36bf-4381-8b75-27c73465efd4/action?threadDisplayName=how-can-i-create-a-url-for-a-pwa-for-ms-project-server-2013-project-file-that-includes-the-view
Who knows how?
Regards
Sander

Hi Sander,
As far as I tested it, it is not possible either with PS2010. The URL only contains the PDP name and the projUID.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Xcode Can't Create Projects

Similar Messages

Maybe you are looking for