XD03 - maximum no. of search hits
Hi,
When we search customer master (XD03) system by default is restricting the max. no. of entries to 5000. Do you know where I can get rid of it or extend this limit ? Actual issue is that user wants to see search term of all customers, but it is showing only 5000 entries currently.
XD03 transaction:
Entering 9999 in below screen does not help.
Below setting does not help.
Thanks,
Sankar
Hi,
simply check on dialog (modal)
as a result no restriction appears, check it and that´s all
Regards,
JM
Similar Messages
-
ICCMP_BP_SEARCH. Increasing the maximum number of search hits from default
Hi,
ICCMP_BP_SEARCH use for search partners.
How I can increase the maximum number of search hits? By default is 100.
I know about parameter SEARCH_MAX_HITS, but this not applicable for this situation.
Denis.Hi Denis,
You can increase it at your identification profile (t-code crmc_ic_bpprofx), at parameter 'Max. Number of Hits'.
Kind regards,
Garcia -
Free search hit list +PPOSE
The free search functionality for PPOSE (Object type position) always shows A003 relationship irrespective of the input parameters used.
For e.g , even if the input parameters entered in free search is Related Object type-P, Relationship type -A 008, the output in the hit list is always A003.
Can you please advise how data is picked up to be populated in the hit list?
Thanks.
RahilaHi,
Try this options mentioned in the SAP note
In the initial screen HELP --> Settings . Go to the tab F4 Help . Go to change mode and choose "Dialog" instead of "Control".
Now for F4 help you will get a check box "No restriction". Use this Check box and try again.
I guess performance will be seriously affected
Refer these SAP notes
Note 487689 - Search help control: Restrictions
Note 163738 - Hit List does not display more than 5000 values.
Regards -
Maximum number of users hit....
hai...
how can we verify that the maximum number of users has not been hit in the databse?
please let me know..
thank u...
v.s.srinivas potnuruhai..
thanks for u reply..
we have one oltp application.we are suffering with some performance problem.to solve that problem i have heard that we have to verify that the maximum number of users has not beet hit.(may be it might be one root cause).
if we have 1000 users in the databse, can we control only 500 or 600 users to do their transactions concurrently?
thank u... -
FF33.1 on Win7 - clicking on a Yahoo search hit sometimes closes tab?
Example: Yahoo search "norton 360" - first few hits are Symantec and clicking any of them closes the tab. Clicking the Best Buy link works correctly...
Edit>>> My FF just updated to 33.1.1 and problem persists...Many site issues can be caused by corrupt cookies or cache.
* Clear the Cache and
* Remove Cookies '''''Warning ! ! '' This will log you out of sites you're logged in to.'''
Type '''about:preferences'''<Enter> in the address bar.
* '''Cookies;''' Select '''Privacy.''' Under '''History,''' select Firefox will '''Use Custom Settings.''' Press the button on the right side called '''Show Cookies.''' Use the search bar to look for the site. Note; There may be more than one entry. Remove '''All''' of them.
* '''Cache;''' Select '''Advanced > Network.''' Across from '''Cached Web Content,''' Press '''Clear Now.'''
If there is still a problem,
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?
Then restart. -
It was the strangest thing. You would think that once you delete a message off your phone it is gone.
But in the "search iPhone" feature several key numbers like an area code reveal phone numbers of people
who aren't in my contact list, specifically the first few words of text messages that I deleted long ago.
I would like to eliminate these once and for all.
Will "Erase Content and settings" do this for good? Once I restore the phone will they come back?
Thanks.
******note found another thread relating to this********no need to reply********
Message was edited by: stewart g.The terms of service of the Apple Support Communities prevent us from helping anyone with a jailbroken phone.
You're on your own. Good luck. -
PA30, Maximum rows 50, Search help PREM
Hello,
Do you know maybe what could be a problem with transaction PA30
when I'm using search help for finding persons I will get only 50 rows on
the list and the message DH803 :
'There are more than 50 possible inputs"
when I was analysing program it's hard coded for 50th but maybe there is a way to set (increase) this value in configuration?
Thank you in advance Bogumilaeven if (T77S0) RECFA:HIHIT is set to 500, the search help results in PA30 are reduced to 50. where can I temporarily extend that value to e.g. 200?
your input is highly appreciated.
rgds
Lorenz -
Is there any way to limit search hits to only the topics found in the TOC?
Hi. I'm interested in creating multiple TOCs for a project. Included will be TOCs that only have a subset of the project topics and books. Is there a way to restrict searching to only those topics and books that occur in the TOC?
Thx.
-ktHi there
There are a couple of ways to accomplish this goal.
The long way around is to select all the topics that are not in the TOC and look at their properties. On the General tab is an option to exclude the topic from any content being found in the search.
Note that with this method, the topic won't be found even if another topic links to it.
The other way is to look at the Single Source Layout options. For WebHelp, it will be found by first clicking to expand the Content Categories area, then clicking to select the category. Once you do this, there should be an option to "Exclude Unreferenced Topics from Output".
Note that using this method, if another topic links to the unwanted topic, it has then been referenced and will still be found via search.
Hope this helps... Rick -
Find toolbar The maximum number of search 100
Hi everyone.
I want the number of words for make find toolbar. I did find but "Over 100 matches" result.
How see total number of words ?''Purecoder [[#question-1035952|said]]''
<blockquote>
Hi everyone.
I want the number of words for make find toolbar. I did find but "Over 100 matches" result.
How see total number of words ?
</blockquote>
I solved the problem. write about:config and find accessibility.typeaheadfind.matchesCountLimit settings name. The value of this setting default 100. I did make 9999999.
Thanks to everyone. -
Product search: How to obtain more than 100 items
Hello experts,
I'm working from CRM 4.0 SP08
I find products from Tr. COMMPR01. Entering the citeria search, the screen only is able to display 100 items.
How can I change this maximum of 100 items to be displayed ?
Regards
Juanhi...
goto t.code commpr01...
goto Extras---> Settings.... in the general tab ....change the value in the Maximum Number of Search Hits
hope it works
kind regards
sandy -
Quantity of result in Target Group
Hi alls;
I've created a target group with 1601 accounts, but when i go to see the accounts of the group, just shows 100. How can i modify to see all accounts?
Regards.HI,
May be this topic help you:
http://wiki.sdn.sap.com/wiki/display/CRM/UsageofConfiguration+Params
"Increasing the maximum number of search hits from default value 100 to any other value"
But I don't know exactly.
Denis. -
Big Table and slow display of the page
Hello,
i have a page (Table format) which corresponds to a table that has many records (some millions). When this page is selected it is very slow because the total number of records is calculated and displayed on the right as a default behavior, with a list of next 25 elements (10 is the default in JHS i think), ie 1-25, 26-50, 51-75.. Of course the list is not full as in the bottom of it there is a select "more..." that displays the next selection choices in the range.
Is there any way to avoid this? I have selected the choice not to auto query in the beginning the table, and the user has to enter search criteria, but beyond that, in next searches, always the full result set or table is scanned and this delays the display of the data.
TIAHi,
You could try setting the group-level property "Maximum Number of Search Hits" on the specific group in the application definition file. This will force end-users to to perform a more restrictive search and thus limiting the number of records in your result-set.
Regards,
Ruud -
VL09 hit error 'F5 727 ("Maximum number of items in FI reached")'
Hi,
I have one user who is trying to cancel GI for DO using transaction VL09 and hit the error 'F5 727 ("Maximum number of items in FI reached")'. I know it is caused by FI document maximum item no is hit. Is there a solution to cancel this GI document? I have checked on SAP note: 0001353827 AC interface: Document split in FI for goods movements, but it does not solve my issue since the system release version is not compatible.
Please help.
Thanks in advance.
Regards,
Ling LingI need to use VL09 to cancel the document, because I need to change the currency on the preceding document (PO).
The case is a user created a Supply Chain PO, a DO created by reference to PO, then post good issue and post good receipt. Then user found out the currency in PO was wrong, so did cancellation on good receipt and good issue. Good receipt is cancelled successfully, but cancel good issue via VL09 hit error.
Instead of applying summarisation in FI, any suggestion for this issue?
Thanks. -
OD settings: "maximum search results" guidance needed
Hello OD users -
I can't seem to find any guidelines as to what settings I should be using for the field "Return a maximum of ___ search results" or the "Search timeout" field after that in Open Directory protocol settings.
I think the default is to leave it wide open- 11000 results timing out in 1 hour. Apple's documentation says you can change that to prevent one type of denial-of-service attack, but they don't give any suggestions as to what settings to use. We only have about 170 OD users set up, but I'm not sure how many LDAP records would be needed in a search, or what a reasonable timeout period would be.
Thanks.Thanks for the reply.
Before responding to your points I want to give a little more context:
We have an intranet based on pure html and a little aspx containing many of those pdf- files. By clicking on the links in the intranet the files open correctly in browser handled by the adobe plugin. Now we set up this search server crawling the file system
accessed through a share to the root folder of the intranet. In the search server settings a host mapping rule is applied to replace the file://[share] with http://[intranet host+domain+port] to access files over http.
And now to answer your question. The resulting urls are the same, copying the link from intranet and copying the link from the search result (except some case issues).
The event viewer not seem to show any errors on this, though I'm not very familiar using it.
If any further information are from interest and any ideas come to your mind - please let me know.
Thanks. -
Search in Internal Table Utility -- Need Pointers
Hi Experts,
As per my requirement i need to search for words in internal table and arrange internal table based on ranking i.e record which has maximum no. of hits should come first.
Example: search for a string 'media rent'.
Incoming internal table records.
row1------> col1: rent col::xyz
row2 -
> col1:media rent col2:media
row3 -
> col1: rent col2:media media
I need to compare each word in col1 and col2 and arrange the rows based on ranking like this:
final internal table
row2 because it has maximum no. of search term
row3
row1
I found out 2 ways to do the above but facing some issues and need your suggestions:
Solution 1:
By using regualr expression i am searching as OR expression on itab.
and using FIND ALL OCCURRENCES OF REGEX command on each column of internal table
Issue: when row3 is scanned for 'media rent' it will give 3 counts i which will lead to move row3 on top in final table due to maximum no of counts.
Is there a way to neglect 2nd occurence in the word ? I cn't use find first occurence here.
Solution 2:
Split search sting 'media rent' into internal table
itab1
media
rent
and search for each word in each row of internal table and make use of counter something like this.i am unable to proceed further here
I am stucked with what kind of logic should be here ?
Looking for your suggestions here.Hi fried,
Try the code below it works fine.
TYPES : BEGIN OF ty_text,
text1 type char11,
text2 TYPE char11,
count TYPE i,
END OF ty_text.
data : t_text TYPE TABLE OF ty_text,
x_text TYPE ty_text.
DATA : v_count TYPE i.
x_text-text1 = 'rent'.
x_text-text2 = 'xyz'.
append x_text to t_text.
x_text-text1 = 'media'.
x_text-text2 = 'media'.
append x_text to t_text.
x_text-text1 = 'rent'.
x_text-text2 = 'media media'.
append x_text to t_text.
loop at t_text INTO x_text.
if x_text-text1 eq 'media' or x_text-text1 eq 'rent'.
v_count = v_count + 1.
endif.
if x_text-text2 eq 'media' or x_text-text2 eq 'rent'.
v_count = v_count + 1.
endif.
x_text-count = v_count.
MODIFY t_text INDEX sy-tabix FROM x_text.
clear v_count.
ENDLOOP.
SORT t_text DESCENDING by count.
If you face any issues please revert back to me i will help you.
Thanks,
Sri Hari
Maybe you are looking for
-
Creation of excise invoice automatic.
Hi All, I have an one doubt. i have done setting for creation of excise invoice automatically. Here is only one excise and series group. So when i do the domestic sale, excise invoice gets created automatically but when i do the export sale and creat
-
Cannot use Java Mail in Oracle 8i
I have loaded Sun's API Java Mail (and Java Activator) into an Oracle 8.1.5 server running on a Windows NT 4.0 server. I have also created a small Java-application that tries to send emails. The application is stored in database as a stored procedure
-
Camera RAW / Bridge CC problem with Exposure in Mac OS X 10.9 Maverics
Recently I purchased MacBook Pro with OS X 10.9 Maverics and I have a problem as described below while working in Bridge CC: If I open Canon RAW files (.CR2) in Photoshop by double-clicking the file (or File > Open With > Adobe Photoshop CC), Photosh
-
Item in transfer process for long
Experts, I have a typical situation where in some of the carts have the status " Item in transfer process" they have been approved and showing the status approved . I checked the Monitors and it reads. Spooler communication error " communication er
-
I put the ARDAgent in the trash, now i can't get rid of it.
To solve another problem, I put the ARDAgent in the trash. Now I can't move it out of the trash, or delete the trash with ARDAgent in it. If I try to move ARDAgent out of the trash nothing happens. If I try to copy it out of the trash it just says "p