XDB requires a username and password apex
Hello,
11.2.0.1.0 g database
I am trying for testing on test server where I am getting error while trying to connect http://localhost:8080/pls/apex.I am able to connect http://<server>:<port>/apex/apex_login and http://<server>:<port>/apex/apex_admin.
The database version is 11g.
Actually my requirement is As I know we cannot use isqlplus in 11g we can use apex instead of isqlplus so please provide the way or navigation how to use apex for isqlplus.
Thanks
Hi,
I once had a similar problem. It turned out that APEX_PUBLIC_USER or ANONYMOUS had been locked. I don´t know if this helps any.
Jens
Similar Messages
-
How can we disable " XDB Requires a username and password"?
Hello,
I've just performed an Apex 4 installation on top of a DB 11.2.0.2.
All is fine.
No problem fine with FF, IE and Safari, but with Chrome I always have a pop up saying " The server XXXX: port at XDB requires a username and password".
How can I disable that, or fix it definitively?
Thanks
FredSure.
On my system Anonymous and XDB account were already unlocked and both used the same password.
I simply executed the PL/SQL block that you can find here: http://www.apexexplorer.com/wp-content/uploads/2010/11/XDB-Password-Issue.pdf
I bounced the listener.
Hope that help
Regards,
Fred -
This server 192.2.2.1 at XDB requires a username and password
Hi all,
I am installing Apex 4.2 in Oracle 10.2.0.4 on SLES 11
But I got the above error. :(
I tried to google the error but to no avail. I see lots of similar error since 5 years ago and it seems there is no solution yet. sad sad sad.
Is Apex 4.2 not supported in 10gR2?
Please help.....
Thanks a lot,
zxy
Edited by: yxes2013 on 28.2.2013 1:20We also had issues with Apex 4.2 and XDB
This from our WIKI:-
When XDB is used for Apex, the ANONYMOUS user must be configured for file access.
as sysdba run the following:
If this block has not been run, then when accessing Apex, one is channged for XDB credentials ("server said: XDB")
SET SERVEROUTPUT ON
DECLARE
l_configxml XMLTYPE;
l_value VARCHAR2 (5) := 'true'; -- (true/false)
BEGIN
l_configxml := DBMS_XDB.cfg_get ();
IF l_configxml.
EXISTSNODE (
'/xdbconfig/sysconfig/protocolconfig/httpconfig/allow-repository-anonymous-access') =
0
THEN
-- Add missing element.
SELECT INSERTCHILDXML (
l_configxml,
'/xdbconfig/sysconfig/protocolconfig/httpconfig',
'allow-repository-anonymous-access',
XMLType (
'<allow-repository-anonymous-access xmlns="http://xmlns.oracle.com/xdb/xdbconfig.xsd">'
|| l_value
|| '</allow-repository-anonymous-access>'),
'xmlns="http://xmlns.oracle.com/xdb/xdbconfig.xsd"')
INTO l_configxml
FROM DUAL;
DBMS_OUTPUT.put_line ('Element inserted.');
ELSE
-- Update existing element.
SELECT UPDATEXML (
DBMS_XDB.cfg_get (),
'/xdbconfig/sysconfig/protocolconfig/httpconfig/allow-repository-anonymous-access/text()',
l_value,
'xmlns="http://xmlns.oracle.com/xdb/xdbconfig.xsd"')
INTO l_configxml
FROM DUAL;
DBMS_OUTPUT.put_line ('Element updated.');
END IF;
DBMS_XDB.cfg_update (l_configxml);
DBMS_XDB.cfg_refresh;
END;
/ -
How do I connect to an SMTP server that requires a username and password?
Hi,
I am currently working on a project for university which requires me to send and receive email. I was until this week able to send mail no problem, but now the SMTP server has been upgraded so that each time a mail is sent it requires the username and password.
Ideally the connection should be made using TLS/SSL, and not use the Authenticator method. I want to pass the username and password directly if possible.
I've been trying to use the following but have been getting handshake, and other exceptions:
SMTPSSLTransport smtpSSLtransport = new SMTPSSLTransport(session,
new URLName("smtp", smtpHost, port, null-File,
"USERNAME", "PASSWORD"));
smtpSSLtransport.setStartTLS(true);
smtpSSLtransport.connect(new Socket(smtpHost, port));
smtpSSLtransport.sendMessage(smtpMessage, message.getAllRecipients());
smtpSSLtransport.close();Can anyone correct this piece of code for me or point me in the right direction of what classes and methods I should be using?
Many thanks in advance,
GordonI always wonder what misleads people to do things this way.
Was there some example you saw that suggested that instantiating
an SMTPSSLTransport was the correct approach? I hope not.
See the smtpsend.java demo program for how to use SMTP
authentication. If you need to use SSL, see the SSLNOTES.txt
file for hints on using the "smtps" protocol. smtpsend.java also
illustrates use of SSL, but you'll need to fix a bug in it to use the
correct property names ("mail.smtps.auth", etc.). -
The server at Mac OS X Server Web Services requires a username and password
I am running SL Server 10.6.2, wiki works but when a person clicks an attached file in a wiki and then selects "open" they get a login popup with the notification The server at Mac OS X Server Web Services requires a username and password. It doesn't matter what they put into the login/pass it comes back. If they hit cancel then the document opens. If they click save then it saves with no issue. I can type in the admin login/pass of the server and it works. Does this mean the security settings to the location of the files is wrong? Any help is greatly appreciated!
By the way they are using Internet Explorer 7 when opening these documents.
-
Hp printer requires a username and password
My HP Deskjet F4583 wireless printer worked wonders with my Windows XP.
Now we've all upgraded to Windows 7 (very grumpy - everything worked just fine on XP)
Tried printing through wireless office network (that "I" set up), and suddenly get this:
"The server 10.0.0.3:80 requires a username and password.
THe server says: HP Printer Networking@."
followed by the appropriate fields.
So now what?
Since when was a username/ password option available - believe me I would have tried to omit it when creating the network - we don't have time to "play" with our gadgets; we just expect them to work with minimum fuss.
Please help...
This question was solved.
View Solution.dave-k2 wrote:
The exact network was shown in my question - it is an 802.11 WiFi network configured for WPA2 authentication.
It is not an open network with no encryption or authentication.
It is not a walled garden network with no 802.11 encryption but using a web browser for authentication.
It is not a WPA2-PSK network with a shared key for 802.11 encryption.
It is a WPA2 network with 802.11 encryption and EAP authentication to a RADIUS server. It needs the printer supplicant to supply a username and a password. I own neither the AP nor the RADIUS server for this network, they are owned by the college my child attends.
There you go. Need to ask your IT department how to connect because the printer will never connect with a browser authentication. Also not supported on a Radius server.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired! -
Help with "Admin user requires valid username and password" on fms2_console.swf page
Just installed FMS2 on Debian (etch, 2.16.5-1 kernel). When I
connect to localhost:1111/fms2_console.swf and get the infamous XML
output which includes the text, "Admin user requires valid username
and password." The *.xml and *.ini files haven't been touched after
installation. All four daemons (fmsedge, fmsmaster, fmscore,
fmsadmin) are running and listening on the correct ports.
Any tips? (I'm sure this is easy to solve...)
Thanks.Hi,
FMIS 4.5 does not accept plain text password. Encrypt=false is no longer supported. See here for more information : http://help.adobe.com/en_US/flashmediaserver/configadmin/WS5b3ccc516d4fbf351e63e3d119f2926 bcf-7fed.html#WS5b3ccc516d4fbf351e63e3d119f2926bcf-7e91
The value for SERVER.ADMIN_PASSWORD needs to be the encrypted string for your password. That should solve your problem.
Hope this helps.
Thanks,
Apurva -
Admin Console - Admin user requires valid username and password
I am running FMIS4.5 on CentOS5.5
FMIS is running and I can connect via Flash Media Encoder.
Web displays and admin console :1111 gives xml output, however
When using the user & password in my xml files to login (testing with ping), I get the "Admin user requires valid username and password" error.
conf/fms.ini:
# fms.ini contains substitution variables for Flash Media Server #
# configuration files. Lines beginning with '#' are considered comments. #
# A substitution variable is in the form <name>=<value>. Everything up to #
# the first '=' is considered the name of the substitution variable, and #
# everything after the first '=' is considered the substitution value. If #
# you want a substitution variable to have leading or trailing spaces, #
# enclose the value around double quotes. For example, foo=" bar " #
# This section contains configurable parameters in Server.xml #
# Username for server admin
# For example:
# SERVER.ADMIN_USERNAME = foo
SERVER.ADMIN_USERNAME = Admin
SERVER.ADMIN_PASSWORD = str34m1ng
# IP address and port Flash Media Admin Server should listen on
# For example:
# SERVER.ADMINSERVER_HOSTPORT = :1111
SERVER.ADMINSERVER_HOSTPORT = :1111
# User id in which to run the process (Linux Only)
# For example:
# SERVER.PROCESS_UID = 500
SERVER.PROCESS_UID = 500
# Group id in which to run the process (Linux Only)
# For example:
# SERVER.PROCESS_GID = 500
SERVER.PROCESS_GID = 500
# License key for Flash Media Server
# For example:
# SERVER.LICENSEINFO = XXXX-XXXX-XXXX-XXXX-XXXX-XXXX
SERVER.LICENSEINFO = #SORRY YOU DON'T GET TO SEE THIS#
# LIVE_DIR denotes the full path of sample "Live" application's
# folder for storing any live stream recorded by server.
# For example:
# LIVE_DIR = <FMS_Installation_Dir>\applications\live
LIVE_DIR = /opt/adobe/fms/applications/live
# VOD_COMMON_DIR denotes the full path of sample "VOD" application's
# folder for storing onDemand and Progressive Download .flv/.mp3 files.
# File stored in this folder can be streamed and are also PD-able.
# Note : If you are using the default installation of Apache as a webserver,
# and if you modify VOD_COMMON_DIR, please change the document root
# accordingly in httpd.conf.
# For example:
# VOD_COMMON_DIR = <FMS_Installation_Dir>\webroot\vod
VOD_COMMON_DIR = /opt/adobe/fms/webroot/vod
# VOD_DIR denotes the full path of sample "VOD" application's
# folder for storing onDemand only .flv/.mp3 files. Files stored in
# this folder are not PD-able
# For example:
# VOD_DIR = <FMS_Installation_Dir>\applications\vod\media
VOD_DIR = /opt/adobe/fms/applications/vod/media
# The maximum size of the FLV cache, in megabytes.
# The default is 500MB.
SERVER.FLVCACHE_MAXSIZE=500
# Whether to start and stop the included HTTP server along
# with FMS.
SERVER.HTTPD_ENABLED = true
# This section contains configurable parameters in Adaptor.xml #
# Application directory for the virtual host
# For example:
# VHOST.APPSDIR = C:\myapps
VHOST.APPSDIR = /opt/adobe/fms/applications
VHOST.ALLOW = all
# This section contains configurable parameters in Application.xml #
# List of semi-colon delimited paths in which to search for script to load
# For example:
# APP.JS_SCRIPTLIBPATH = C:\scripts;C:\Program Files\Foo\scripts
APP.JS_SCRIPTLIBPATH = /opt/adobe/fms/scriptlib
# This section contains configurable parameters in Logger.xml #
LOGGER.LOGDIR =
# This section contains configurable parameters in Users.xml #
# Enable or disable using HTTP requests to execute admin commands.
# Set to "true" to enable, otherwise it will be disabled. The
# actual commands permitted for server admin and virtual host admin
# users can be set in Users.xml.
USERS.HTTPCOMMAND_ALLOW = true
Users.xml:
<Root>
<UserList>
<!-- This tag defines an administrator for the server. -->
<User name="${SERVER.ADMIN_USERNAME}">
<!-- Salted Password Hash for this vhost administrator. -->
<Password encrypt="false">${SERVER.ADMIN_PASSWORD}</Password>
<!-- This admin can only connect to the server from the specified -->
<!-- hosts. This is specified as a comma delimited list of -->
<!-- hostnames or domain names, and/or (full or partial) IP -->
<!-- addresses. For example, -->
<!-- "foo.yourcompany.com, macromedia.com, 10.60.1.133, 10.60" -->
<Allow>All</Allow>
<!-- This admin cannot connect to the server from any of the -->
<!-- specified hosts. This is specified as a comma delimited list -->
<!-- of hostnames or domain names, and/or (full or partial) IP -->
<!-- addresses. For example, -->
<!-- "foo.yourcompany.com, macromedia.com, 10.60.1.133, 10.60" -->
<Deny></Deny>
<!-- Specifies the order in which to evaluate the <Allow> and -->
<!-- <Deny> tags. This can be "Allow,Deny" or "Deny,Allow". The -->
<!-- default is "Deny,Allow" which means that access is allowed -->
<!-- unless specified in <Deny> and not specified in <Allow>. -->
<Order>Allow,Deny</Order>
</User>
<User name="janedoe">
<Password encrypt="false">S4mpl3P4ss</Password>
<Allow></Allow>
<Deny></Deny>
<Order>Allow,Deny</Order>
</User>
</UserList>
<AdminServer>
<HTTPCommands>
<!-- Enable or disable using HTTP requests to execute admin commands. -->
<!-- Set to "true" to enable, otherwise it will be disabled. The -->
<!-- actual commands permitted for server admin and virtual host admin -->
<!-- users can be set in the Allow and Deny elements. $
<Enable>${USERS.HTTPCOMMAND_ALLOW}</Enable>
<!-- List of server admin commands that can be accessed via HTTP. -->
<!-- Add multiple commands separated by commas. "All" indicates -->
<!-- every command (it's not recommended to allow all commands). -->
<!-- Seperate multiple commands with commas. -->
<Allow>ping</Allow>
<!-- List of server admin commands denied access via HTTP. -->
<!-- Add multiple commands seperated by commas. "All" indicates -->
<!-- every command. -->
<Deny>All</Deny>
<!-- Processing order for deny and allow command lists. "Deny,Allow" -->
<!-- means the command will be allowed if the command is in the allow -->
<!-- list or not in the deny list. "Allow,Deny" means the command -->
<!-- will be allowed if it is in the allow list and not in the -->
<!-- deny list. -->
<Order>Deny,Allow</Order>
</HTTPCommands>
</AdminServer>
</Root>
Output on :1111/admin/ping?auser=Admin&apswd=str34m1ng :
<result>
<level>error</level>
<code>NetConnection.Connect.Rejected</code>
<description>Admin user requires valid username and password.</description>
<timestamp>Thu 17 May 2012 11:33:43 AM EDT</timestamp>
</result>
Connections do not work from both localhost and external connections and the fms_adminConsole.htm (.swf) fails as well.
Any assistance is appreciated!Hi,
FMIS 4.5 does not accept plain text password. Encrypt=false is no longer supported. See here for more information : http://help.adobe.com/en_US/flashmediaserver/configadmin/WS5b3ccc516d4fbf351e63e3d119f2926 bcf-7fed.html#WS5b3ccc516d4fbf351e63e3d119f2926bcf-7e91
The value for SERVER.ADMIN_PASSWORD needs to be the encrypted string for your password. That should solve your problem.
Hope this helps.
Thanks,
Apurva -
IPhone won't let me log onto any site which requires a username and password
Hi there,
My iphone 4 (ios5) has stopped letting me log onto any website which requires a username and password. They have all worked in the past but have stopped working. My iPad is fine.
It happens if i am connected to wifi or 3g.
Has anyone else suffered this?
I have restarted the phone and done a backup and restore.
Any advice would help.
ThanksSorted it. In settings - safari - privacy was set not to accept any cookies. I have changed that to accept from visited. Now working ok again.
-
Connecting printer to a secure wireless network which requires both username and password
I have the hp photosmart 6510. I have it in my college dorm, which has a secure network with requires both a user name and password. I need help setting it up as I can't seem to get the printer to enter a username and password. I know the printer works and I know that my computer can print wirelessly with the printer. My college game me this setup configuration.
Configuration Item Preferred Value Optional Value (less preferred)
Network Name of SSID umd-secure
802.1x Operating Mode
(note: 802.11b is no longer supported) Infrastructure or Network (not ad hoc)
Security Mode Enterprise (not Personal)
Network Authentication WPA2 WPA-less prefered
Data Encryption CCMP or AES (TKIP-less prefered)
Roaming Identity or Outer Identity anonymous
Authentication Type or Outer Authentication TTLS (PEAP-Less prefered)
Authentication Protocol or Inner Authentication PAP (MS-CHAPv2-less prefered)
Validate Server Certificate or Verify Server Name Yes
Certificate Issuer or Trusted Root CA Thawte Premium Server CA (Any Trusted CA -less prefered)
Server Name or Certificate Name wireless.umd.edu
Server Name must match YesHi @hatyai ,
Thank you for visiting our English HP Support Forum. We are only able to reply to posts written in English. To insure a quick response it would be advisable to post your question in English. The following links are here to assist you if you prefer to post in the following Language Forum.
English: http://h30434.www3.hp.com
Spanish: http://h30467.www3.hp.com
French: http://h30478.www3.hp.com
Portuguese: http://h30487.www3.hp.com
German: http://h30492.www3.hp.com
Korean: http://h30491.www3.hp.com/t5/community/communitypage
Simplified Chinese: http://h30471.www3.hp.com/t5/community/communitypage
Thank you for your understanding
I work for HP. However I speak only for myself, not for HP nor anyone else -
Why am I getting this message and how can I fix it? I can't access any websites. What username and password an I supposed to put? I'm dumb with this stuff so please provide a simple explanation? Thanks.
Do you mean the password of the wifi network i'm connected to?
-
ITunes radio now requires a username and password to listen to radio!
I recently noticed that when I try to listen to radio via iTunes it asks me for a "Members Only on pri.kts.-af.net" username and password. I have never had this issue before. Anyone know what happened or know where I can get a username and password?
My current theory is that there must have been some problem with internet options. Unable to find anything to change, I have just uninstalled internet explorer 9.
Seems okay so far....
iTunes wifi sync seems less buggy too.
Time will tell. Will update if this has not solved the problem. -
Error: XDB requires a username ans password
Hello there,
I have installed Oracle xe 10g a few months ago on a Windows 2003 server. I use Oracle for storing some data that I use in my Asp.Net / C# webapplication. Everything worked fine until a few weeks ago....
On the Oracle server I opened internet explorer 7 (also tried with firefox) and browsed to the database homepage ( http://localhost:8080/apex ), I then got a windows popup saying I should authenticate.
See this URL for a screenshot: http://img508.imageshack.us/my.php?image=oracleerrornt2.jpg
I have tried multiple different passwords such as my own windows credentials, the windows credentials from the windows administrator and my system login that I use in Oracle. None of them worked at all, and after three failed attempts, I see a white webpage with the text: "Unauthorized".
Because nothing worked I backupped my databases via SQL plus commandline (because that still worked, thankfully), uninstalled Oracle Xe en rebooted the server. I then installed Oracle Xe again, and when I go to the database homepage the error was gone. So I imported my databases again and was happy again, but today the error returned....
Does somebody know how I can solve this problem, without first uninstalling Oracle Xe and installing it again?
Maybe some handy additional information; I don't use a proxy server, the database homepage is a trusted site in internet explorer, and in my host file the only entry it contains is the default: 127.0.0.1 localhost.
Cyaits looking u using limited account from yours pc!
(try to catchs admin (full administratior) from yours pc win platform based pc)
gordan
http://gordanmilojevic.blogspot.com -
Ask for username and password for XDB when download files
Hi,
I have an application to upload/download files. While the user click on the file link for downloading files, a small window pops-up saying that "The server 127.0.0.1 at XDB requires a username and password.".
Can anyone shred some light ?
Thanks.
EdwardEdward:
Does this link work ? if it does then I think you may need to set up appropriate ACLs in XDB for the other IP address.
http://127.0.0.1:8080/apex/wwv_flow_file_mgr.get_file?p_security_group_id=1025018959703326&p_fname=24-Nov 08.doc
Varad -
Username and Password for access apex 4.2
Hello,
I have installed apex 4.2.
Then i have execute java -jar apex.war to instlla listener
Then i have execute
http://localhost:7779/apex
at this point the server ask
Autentication Required
The server http://localhost:7779/apex requires a username and password
The server says XDB
??? Witch are le Username and Password ??
Thank YouI understand now. You are in the Embedded Web Server and can not access the Admin settings. In order to reset the password back to defaults, we will need to restore the Network defaults on the printer, then reconfigure the printer for your wireless network again. You can use the steps below to restore the network defaults on the printer;
Touch the little wrench (settings) icon you see in the top right hand corner of the printer touch screen.
Touch the Wireless Menu.
Navigate to Restore Network Defaults.
Once restored, go to the Wireless Setup Wizard in the Wireless Menu and reconfigure the settings.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP
Maybe you are looking for
-
How can I solve this publishing error in iWeb?
Suddenly, when I try to publish in iWeb, I get the following error message: Publish error: Can't create the file "site/home.html." The disk may be damaged or full, or you must not have sufficient access privileges Well, I have a Mac Pro tower, loaded
-
Chip on iPhone 5 fresh out of the box.
So...I ordered a new iPhone 5 from AT&T. It arrived today. I activated it with AT&T rep on the phone. All went well. Noticed some "lint" under the plastic protective sheet on the back of the phone. I removed the plastic. The lint was acutally a raise
-
Oracle WebCenter Installation on Apple Mac OS X 10.6.6
Could anyone tried to install Oracle WebCenter 11G PS3 on Apple Mac OS X (version 10.6.6) 64bit machine? I downloaded Oracle RCU (11.1.1.5.0) utility for linux (file name: ofm_rcu_linux_11.1.1.5.0_disk1_1of1.zip) and tried to run rcu as follows after
-
When I started up my macbook Pro after a boat trip (just lying in my bag the whole time) it started making weird sounds. Why does it do that and how do I stop it?
-
Admittedly, I'm green to software deployments in an enterprise type environment, but I'm trying to deploy various Adobe software packages to users (~500). Air is one in particular that I've been wrestling with. I get an error message every time I try