XDCAM EX support not present on new CS4 install

Hello All,
I recently had to reinstall my MAC OSX and completely reformat my hard drive.
So I reinstalled Premiere CS4 and now none of the new codec support is there, even with the latest updates.
AVCHD, XDCAM, RED, all gone from the list of presets, and I can't import any of those file types into Premiere AT ALL!
The only available presets are AVC-Intra, DV, DVCPRO, and Mobile Devices.
I'm using a:
Mac Pro 8-core 2.8Ghz
6GB RAM
Running on Snow Leopard
Adobe Premiere Pro CS4 w/ latest updates
Anyone have this problem or know how to get back all the latest formats support?
Thanks
Foster

I'm having the same issue. I upgraded to CS4 and XDCAM EX options are no longer available as project options???
I'm running on Windows XP with a Matrox Axio LE.
Cheers
Bob

Similar Messages

  • HT3917 My apple wireless keyboard is not working after new batteries installed

    My apple wireless keyboard is not working after new batteries installed.

    Do you get a steady green light to say there is a connection.    If not, are the batteries the right way round.   Do you have a monitor to tell the batteries strength. Is there a reading.   Are the batteries good quality ones, Duracell, Energiser or Apple rechargeables.

  • Debugging on Mac - Active Architecture ppc is not present in AE CS4

    When I try to debug using XCode, I get the message
    "The active architeture ppdc is not present in the executable 'AE CS4' which contains i386."
    So how do I configure the build to allow debugging?

    I was using CS4 sdk and not being able to debug.
    I switched to CS3 SDK as you suggested and found a way to debug.
    In the project build properties I changed architectures from"ppc i86" to "32-bit universal".
    Now I can debug!
    So what architecture should I use for the release version?
    (maybe a stupid question, but I'm not a Mac person)

  • EYETV LITE WILL NOT STARTUP WITH NEW MAVERICK INSTALL

    eye lite will not start up with new maverick installed untill you unpluge usb then reinstall.

    Well, I download the driver for Windows 8.1 64 bit, it appears to down load then says extracting and the bar goes along to 100% then nothing. There is no option to install the printer wirelessly, the printer does not appear in the devices and printers, the Scan Doctor tries to fix the problem and just says need to install the wireless facility by using the manual when I select the wireless option. As I said, I can plug in USB and use printer fine but what is the point of having wireless if it doesn't work? Printer worked fine when installed on Home Hub 2. Got a new lap top and still  no problems. Problems started when had to have new Home Hub as the broadband connection kept dropping out. BT sent HH3 as don't do HH2 any more. Realised that the printer was still holding the details of the old hub but couldn't find a way of changing this. Reset printer to factory wireless settings so not holding these now. Cannot use CD to load printer as doen't work with Windows 8.

  • How to upgrade firefox in Ubuntu 10.04? Upgrade button is not present and unable to install the downloaded latest version.

    We have around 250 desktops where we have installed Linux Ubuntu 10.04, now the problem is that the Mozilla Firefox version in Ubuntu is 3.6 and the application we are using does not work correctly unless the firefox version is higher then 5.0, I have tried many times to upgrade the version but failed. So I would like to know the actual process of how to do the upgrade, I am not familiar with linux which has increased my problems. Please suggest

    https://support.mozilla.com/en-US/questions/886524

  • My ipod w/ clickwheel does not link after new iTunes install using dock

    I have had this ipod for 5 1/2 years without problems; it even holds a good battery charge. After updating to the new iTunes, now for some reason my ipod will not be recognized when I plug the ipod into the dock that came along with this computer (this is when connected to the firewire 400 port on my iMac G5). There was no problems in the past and I only experienced this after updating to the new iTunes. Anyone else had this problem?

    I really think this was just a problem with the new iTunes. After the update I did not experience this problem any longer.

  • External disks will not mount on new OS install

    Hi,
    I just had to reformat and reinstall all the OS and applications on a imac g5 for a friend of mine. I have updated all the os to 10.5.8 and have installed user software iWork, iLife, Microsoft office and Roxio's Toast 10 and a family history software called Reunion. That is all that has been done to this new install.
    I went to transfer her personal files back and I can't get any external disks to mount. They will all show in disk utility but will not mount the desktop. I have tried 2 different drives formatted in Mac OS Exteded Journalled as well as MS-Dos Fat32. I have also tried flash drives formatted in each of these formats. All of these drives are readable on several other computers I have here, including a 2008 Macbook Pro running Lion, 2010 iMac running Snow Leopard as so on.
    When inserted in the iMac G5 I can see all the drives in disk utiltiy and was able to even erase and reformat a drive to differnt format ( mac extended to Fat32) without issues to mount on the other computers.
    Cd's mount just fine.
    Anyone have any clues as to what's going on? Any thoughts are most welcome.
    Thanks
    pax

    BDAqua wrote:
    What exactly shows in System Profiler>Hardware>USB for those drives?
    Boot from the Install Disc & see if they show up, not grayed out in Disk Utility.
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    We were thinking along the same lines. While at home I dug up a firewire enclosure and put a bootable GUID formatted drive in it (that I had in one of the usb enclosures) and started her computer holding down the option key and then chose to boot from the external firewire. All usb drives are now mounting upon connection. I asume that her drive has bad sectors on it (even though the SMART status says it's OK) and is not loading all the drivers properly for USB to mount. I was suspicious from the beginning that the OS was corrupt when she first had me look at it. It was at that point that I booted it in target mode, connected to my Macbook Pro, and then CCC'd to a usb drive that I had. I then had a couple of difficulties installing the new OS. Should have known......
    I am now going to put a new drive in it for her and she'll be up and running.
    Thanks so much for your help and thoughts that got me thinking as well.
    pax

  • NP Officejet H470 - willl not print after new cartridge installed

    Changed my black cartridge and now will not print at all.  Document shows briefly in printer dialogue box but then disappears.  Printer makes a noise like it wants to print but then nothing happens.  Printed fine before cartridge change!  Any ideas?

    I bought a new unit. First thing it would not work. Pause light and start light flashed. finally after much research on HP site and elsewhere I solved it myself!
    I found a part loose in the unit! Open the ink door, see a 1/8" +/- diameter rod under the print carriage, look at the right end, there is a white part that should be down and probably should click into place. Mine was up at a 45 degree angle. It went down easily, but did not truly click into the receiving hole, however it was enough that the printer worked!
    The left side was down, but yours may bear checking.
    HP puts you through all the testing stuff, but fails to rememder that printers are electro-MECHANICAL devices and can fail on the mechanical side.

  • 1st gen mini (1GB) will not restore with new updates installed

    hey everyone would appreciate some help on this one cause im stumped.
    i plug in my ipod and it says it needs restored on ipod itself and on pc. i will try to restore and it will but once window closes it comes up again. i tried running a diagnostic check on my ipod and everything is green but my connection status. i wouldnt think that i am having a USB problem because it looks like it is charging on the ipod. all software is updated and has been uninstalled and reinstalled several times and itunes seems to work fine.

    See:
    Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

  • Synch not working after new FF install

    I set up sync before having my laptop replaced only to find that apparently my new install on the new laptop can't sync because the version on my old PC wasn't the latest version: http://mzl.la/1BsOrV8
    Is this the case? Is there anything I can do to sync my new install with what I synched before my old laptop was wiped?

    hi smash100, firefox 29 and above use a new sync login system which isn't compatible with the old username/password/sync-key method anymore. you could try this "hack" to get a new firefox version to connect to an old sync account though:
    enter '''about:config''' into the firefox address bar (confirm the info message in case it shows up), right-click somewhere in that page & create a new string preference named '''services.sync.username''' with a value like '''fake'''.
    afterwards you should be able to connect to the old account through the firefox options > sync panel. click on '''set up firefox sync''' > '''i have an account''' > '''i don't have the device with me''' where you can enter your existing credentials.
    if this worked and you could import your data successfully, please migrate to the new sync afterwards: [[How to update to the new Firefox Sync]]

  • Mac Pro not starting after new RAM install.

    Hey everyone,
    I have a Mac Pro Mid 2010 2x2.66 GHz 6-core (12core) Mac Pro with OSX 10.7.5. I currently have 6gb 1333 MHz DDR3 ECC ram installed.
    I ordered 16gb (2x8gb sticks) of RAM from newegg, specifically, 2 sticks of this ram:
    Kingston 8GB DDR3 1333 ECC Registered Memory for Apple
    I popped it in yesterday and when I try to start up, the LED light just flashes and the screen acts as if nothing the computer hasn't been turned on. It does not beep or make any startup sounds either.
    As far as I can tell this memory is in spec. It is "Registered", could this be a potential problem? I have tried various configurations of which slots to put the ram in. The only thing I haven't tried is putting the 2x8gb sticks in by themselves to see if it might be a capacity or mixing of ram issue.
    Does anyone have experience with this or know where I might be going wrong?

    What you have not done is actually... what I would have done first to start with!
    To make sure it works and works alone.
    Mixing is suppose to work now, better, but as OWC found earlier, mix and match requires DIMMs that will.
    There is more in depth on MacRumors about ranking, Registered and much more about using 3rd party and what to look for and does or does not work. Which is nice, they try and tend to keep everything in one place, one thread, easy to find and read.
    And Newegg price isn't really different than say buying from MacSales.

  • Wi-Fi adapter Ralink RT3090 is not present access to the Internet

    Has bought lenovo s205 (e-450). Wi-Fi adapter Ralink RT3090 802.11n 1T/1R PCI-E Wireless Network Adapter sees a network (even two routers), but access to the Internet is not present. Tried to instal the driver from a site lenovo and with Ralink. Anything it has not turned out yet. Help to understand what to do? PCI\VEN_1814&DEV_3090&SUBSYS_F10117AA&REV_00 OC Windows 7 ultimate sp1 (x86)

    I read messages on this site http://forums.lenovo.com/t5/IdeaPad-S-series-Netbooks/Lenovo-S205-with-RaLink-3090-series-wifi-adapt... http://forums.lenovo.com/t5/IdeaPad-S-series-Netbooks/Lenovo-S205-Detects-my-wifi-network-but-it-wil...

  • IPhoto not present after Leopard upgrade

    iMac upgrade to Leopard fails to install iPhoto
    Did an upgrade with format old data. Install appeared to be completed successfully. Went to import some photos and iPhoto was not present. Had installed the iWork suite as well and was under the impression iPhoto was on the OS disk.
    Any ideas why it is not present and how to install? Attempted download install and said not previous versions detected, aborted.
    Thanks for reply / help.

    reinstalled iLife08 and both iPhoto and iMovie icons came up on the bar. Appears to be there now and opens. CD looks fine but hearing a nice hum when installing like an abnormal spinning of the hardware.
    Thanks for the update. If you know of any issues with the original iMax core duo white, drop me a note as I do not believe it something tied to hardware and not the disk. The disk is a family pack upgrade and have never had the problem on another machine....
    Good day and thanks for the thread.

  • CS4 Install Tips - OS X

    I could not get Fireworks CS4 to successfully run on my Mac
    running 10.5.5. After several install/uninstall/reboot/repair
    permissions cycles, trying to install it under a different user,
    installing it after a Safe Boot and pretty much everything short of
    having a witch doctor attend to the computer, I finally got it to
    install and run without failing with the "AMT Subsystem Failure"
    message.
    If you have installed the Fireworks CS4 beta it is important
    that you use the uninstaller to remove it before attempting an
    upgrade.
    Being an old Mac hand I did what a lot of us do: I dragged
    the beta to the trash and emptied it. I deleted the old prefs file
    and thought I was done. However, after spending hours trying to get
    the new CS4 installed I finally downloaded Adobe's CleanScript and
    ran it. It found the beta uninstaller (!) and asked me if I'd like
    to run it. I did. After rebooting (to be safe) I tried again to
    install the new CS4.
    It worked just fine.
    So if you have installed the beta make sure you use the
    uninstaller to remove it before attempting to install the new CS4.
    Hope this saves someone some trouble.

    You can install on a second computer simply copy the install files from your DVD to a USB drive.  Acrobat 9 itself may function but you may face some difficulties with PDF creation under 10.8.

  • CS4 Not working for New Macbook retina display?

    So I finally upgraded to the  new MACBOOK PRO retina display I've been using CS4 since 2009 now since I transferred all of my files/data/etc into my new laptop for some odd reason I can't use my Photoshop it keeps saying
    FATAL ERROR
    /Library/Application Support/Adobe/Adobe Version Cue CS4/Client/4.0.0/VersionCue.framework
    Anyone know why? Do I need to finally upgrade to the latest CS? Before you shout stupid...I'm not that professionally educated on the way these things work.

    Photoshop and most other adobe products never work right after transferring instead of reinstalling using the adobe installers, because the install of photoshop is not a tidy application like most mac applications and strews things all over the operating system, not just in the applications folder and transferring it from from backup or whatever can't possibly transfer all the bits and pieces that make up the photoshop cs4 install.
    If your lucky you can download and install photoshop cs4 from this link and hopefully will that repair any of the missing items.
    Download CS4 products
    Otherwise, you'll have to run the adobe creative cloud cleaner, delete everything adobe on the hard drive and reinstall photoshop cs4

Maybe you are looking for