Xdcam hd footage in premiere cc not good

Hello All,
Tested CC today after many years with fcp7. My XDCAM HD footage finally can be played and edited natively without to many artefacts but we are still not there yet. Not to mention how slow the software runs. Scrubling is almost impossible. Hope this will be fixed ASAP.

This footage is not very difficult to play and works just fine in Premiere Pro CC. More likely the problem is your system just can't handle it.

Similar Messages

Pr cs5 is not good,import 3k or 4k "Red" footage,crash or fail!

Pr cs5 is not good,import 3k or 4k "Red" footage,crash or fail! only support 2k footage...HELP!
In Pr cs4 ,install RED ADOBE CS4 plugin,such as 2k/3k/4k "red"cut footage is no problem..

1.2?
- you shouldn't expect to be able to open a CS5 project with CS4; maybe it will happen, but often something will not function correctly
- PPro 1.5 is quite old, say 7-8 years, and things have changed quite a bit. CS5 supports converting projects from CS4 and CS3, but we make no guarantee at all about any previous versions. If you have CS3, you should be able to open your 1.5 project and save it as a CS3 project, which CS5 would then open. Even that has its own risks.

Working with 48fps footage in Premiere CC

Hi there,
I am currently working on a 24fps project with R3D footage in Premiere.
Some of the footage for a new sequence I am working on was shot at 48fps (and will need to be exported to 24fps while retaining 48fps' slow motion effect) and I am unsure how to go about this.
Can Premiere play back in the program monitor at 48fps? Can it interpret/render 48fps footage to export to 24fps while retaining the original attributes of the 48fps footage? Or would I need to use additional software to accomplish this?
Ideally I would like to be able to edit/playback the footage at the correct frame rate within Premiere as I need to synchronise it with music to see which segments of the clips I have will work best.
Any advice is greatly appreciated.
Thanks!

If I'm understanding you right. Your R3D footage is a baseline of 24fps (or 23.976fps) but was overcranked on the camera to 48fps, meaning it should playback half the speed of realtime. I don't know much about camera settings but normally the camera processes this internally and then spits it out at 24fps but was actually overcranked for slow-motion. Arri Alexa does this internally. I have worked on R3D slow-mo before and I know it processes it internally also.
Unless the red camera has a setting to turn that off I do not know. The important part is; is the footage at 24fps or 48fps BASELINE and how much excess fps was set to overcrank in the camera settings? (i.e was it set to 'squeeze' 48fps into 24fps)? Normally premiere pro cc is good at reading the footage's baseline fps value in the browser.
But to interpret footage inside of premiere pro cc, its easy - all you do is bring in your footage into the browser, then right click on it, go to modify then interpret footage; in the menu at the top, change the fps value interpretation from 48fps to 24fps (or whatever baseline you want) and then click ok. Drop the clip onto a timeline matching the rest of your baseline fps and it should be slow-mo. You should see the value of the clip's timecode length increase double in the browser metadata.
Hope that helps, let me know how it goes. Be useful if you can take screen grabs of the metadata so we can see what your looking at.
Regards

Editing Red Dragon Raw 6k Footage with Premiere CC and/or CC 2014 - Which is better and what issues should I expect?

Hi All
As the title asks;
1. Are there any known issues when Editing Red Dragon raw 6k footage in Premiere Pro CC/CC14 ?
2. Which version of the software would be the best choice ? CC/CC 2014 (I have both)
This is my first Red Dragon 6k Project in premiere CC software and although I have used CC extensively since its release I am working with a tight turnaround so making sure I have as much info as possible to troubleshoot. (if needed)
This question is directly related to the software and any known issues. It is not hardware related as we are setup for that side of things with very fast SSD -> Thunderbolt storage and powerful machines.
Any info or experiences would be greatly appreciated
Thanks
Piers

Hi Piers - did you ever get an answer or figure out a good workflow for editing 6K in premiere?
If so, i'd appreciate you sharing what you've learned.
Thanks!

Canon 300 footage crashing Premiere PRO 6 on Mac PRO

As stated above... C300 footage crashes Premiere Pro when using on my Mac Pro. It happens when you scrub through the footage. I have done plenty of searches and everyone with a Mac Pro seems to be having the same problem. The footage also has glitches in the frames when it plays and renders. The only solution I have found is to transcode the footage to something else, which kind of defeats the purpose of using Premiere Pro 6 in the first place. I know this is a problem specific to the Mac Pro because my Macbook Pro does not have this issue when dealing with C300 footage. Does anyone know of any actual solution to this other than transcoding all the footage?
Premiere Pro 6.02
Mac Pro OSX 10.8.2
2 x 2.66 6 core Intel Xeon
32GB Ram
ATI Radeon HD 5870 1024

Hello,
Because you've said you already "re-downloading":
1. Maybe you have to activate/deactivate, so please have a look there:
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
2, Sometimes, we know in the meantime, the "opm.db file" is the culprit. In this case you should delete it.
3. Did you already try "uninstalling and re-installing"?
Be careful with (de)installing aso. by (de)installing by your own resources. As much as I regret it and as strange as it may seem I fear it's a challenge for Adobe's Creative Cloud Cleaner Tool.
Sometimes - for whatever reasons - CC doesn't "want" to work. In this case you should CC completely delete and reinstall by help of Adobe Creative Cloud Cleaner Tool. (A try to uninstall by own resources is not enough!)
I quote: Adobe Creative Suite Cleaner Tool helps resolve installation problems for Adobe Creative Cloud and Adobe Creative Suite (CS3-CS6) applications. The tool removes installation records for prerelease installations of Creative Cloud or Creative Suite applications. It does not affect existing installations of previous versions of Creative Cloud or Creative Suite applications.
Please use: http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html and follow the prescribed sequence of operations
4.If necessary and for further questions click through http://helpx.adobe.com/contact.html and if "open" please use chat, I had the best experiences.
Good luck!
Hans-Günter

IDVD stability is not good, *many* crashes, should I stay or should I go?

OK, I seem to be just the latest to rant on this topic, but I've got a brand new MacBook Pro, with 10.6.2, and if iDVD stays running for more than 10 minutes without crashing I'm doing well. Unlike other posters, I've not yet had a crash while burning. The trouble for me is getting to the point where I'm ready to burn. Just the most basic manipulation of buttons, sometimes just setting text, or placing the button on the page will often result in a crash. I'm now to the point where I save after just about every gesture. Not good!
Apple, was this thing tested?
BTW, my experience with iMovie has been a little better, but not much. Many crashes, but fortunately not quite as often.
Apple community at large, should I give up on these apps? Am I going to just be endlessly frustrated? Are there new versions in the works? Or at least some serious updates?
Thanks for reading to the end!

The problems I've seen here relate to people updating to Snow Leopard from Leopard or earlier. SL is pretty much a complete rewrite, so I'm not surprised that some folks have problems. Another problem I've seen relates to people who install there own hard drive because there seem to be some EFI firmware issues.
Really, I think it's just buggy software.
I've seen nothing to support that supposition. Like I said, everything works great for MANY of us.
I worked for a long time on Windows with Adobe Premiere and never once had a crash
Now, THAT I find hard to believe
Did you install QuickTime 7 from the install DVD? (It goes in your Utilities folder). I'm not a big fan of QuickTime X when working with some video formats.
I don't have that much video in my current projects (few hundred Gig)
Actually, a few HUNDRED GIGS sounds like a lot to me. Where is it stored? If its all on your internal hard drive you may be having problems with scratch space.
Did you go for the 7200 rpm hard disk drive option (like I did)?

Premiere Elements not working

When starting, it reports Organiser Database missing or corrupt. When trying to create a new database, Adobe crashes and ends.
Any suggestions?

Hi AT,
You mentioning the psa.prf file helped me in googling the steps you mentioned for other users on the forum, so thanks for that.
Also your direct download link was helpful, as the package is not able to update from the help/update function.
Any idea why the update functionality is not working properly?
I still need another update for camera raw, for both photoshop and premiere. I found links for direct dowloads for versions 6.5 and 6.6. Also the direct links end in a crash, see attachment.
Do you have suggestions?
Regards,
Henk
Verzonden met Windows Mail
Van: A.T. Romano
Verzonden: woensdag 24 december 2014 23:58
Aan: Henk Thomassen
Premiere Elements not working
created by A.T. Romano in Premiere Elements - View the full discussion
HenkThomassen
Great news. Great job in working through the details to get to the solution.
I was waiting for more information from you so that I could give you version specific information on the how to.
But you seemed to have found the paths needed without supplemental instructions.
The two major troubleshooting tools that I would use when the Elements Organizer is involved
a. delete the psa.prf file
and/or
b. create a new catalog.
Best wishes as you move forward in your Premiere Elements 9.0/9.0.1 projects.
By the way, if you are not working from the 9.0.1 Update, good idea to do that.
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4929
You can do that update with the program closed....do not bother with Help Menu/Update for this update. Use the link instead.
ATR
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7042643#7042643 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7042643#7042643
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Premiere Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Adobe premiere could not find any valid editing modes error

Hi, I am installing adobe premiere 8 and the update patch and when I click New Project I get the error message Adobe premiere could not find any valid editing modes, please reinstall and start again. I have reinstalled, installed patch, checked for the vidc.draw in registry and none of these have resolved.
Have XP service pack 3, with valid HD space etc... Any suggestions greatly appreciated.

Hello, Kelzb,
Premiere Elements has its own forum, which is here:
http://forums.adobe.com/community/premiere/premiere_elements
and you'll probably get better, faster replies to video questions there. Good luck!

Importing HD (AVCHD) Footage into Premiere Pro CS3 (windows)

Hi guy's the question is pretty much in the title.
Is it possible to import HD (AVCHD) footage into Premiere (with or without aditional software)?
Thanks.

What I can't figure out is why such a major format does not have native support in in Premiere CS3.
http://en.wikipedia.org/wiki/AVCHD
This is a format that has been adopted by Sony and Panasonic and is compatible with most blue-ray players and even the Play Station 3. So why would so many of the small software companies, in competition with Adobe, have recognized the importance of the format and come up with solutions to read and edit the format when Adobe has not?
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb403297&sliceId=2
I've been coming back to Adobe's web site for months hoping to find they are working on a solution and I have found nothing. I have been a huge fan of Adobe software for years and have pumped many a pay check in keeping my Adobe software current, the most recent being the purchase of the CS3 Master Suite. I'm not trying to bash the company but Adobe if your listening I really want to know want to know what the real story is. This goes beyond the "we are just busy and will get to it when can" statements I have been seeing on the adobe sites. It looks to me as though some other deal has been made and Adobe does not want to talk about why they are not incorporating the AVCHD format into Premiere CS3.

Premiere will not open clip in Adobe Audition

Working on some footage and I've noticed that Premiere will not allow me to open the clips in Adobe Audition...the menu selection is greyed out.
See below...
It doesn't matter what the footage is or what camera its from.
Any guesses?

Hi avanishdivya,
I checked all the things you suggested, and all of them are greyed out, except when going to the Edit menu, there is an option to edit the Squence in Audition...not the Clip.
See below:
System info:
Windows 7 Ultimate sp1
Adobe CC Suite all up to date.
i7-2600K
32gb RAM
512 SSD
1TB HDD x5
GTX470
Everything seemed to work fine in CS6, haven't installed any new software/plugins etc.

How Do you import C100 footage into Premiere Pro CC

I just tried importing Canon C100 footage into Premiere Pro CC, but get no sound. I'm not sure what I'm doing wrong and I pray I don't have to convert this footage before bringing it in. Is there a workflow anyone can recommend? Do I have to convert the footage first? Thanks, Lucian

Lucian,
PrPro should work natively with the Canon C100 footage ... it works with almost everything out there. And with the C100 shooting MP-4, AVCHD, & H.264, those are all handled easily by PrPro.
My question ... I would surmise (from what little info you include) you are shooting AVCHD? The reason I say this is that format splits audio & video into different files ... so it's a bit trickier to "import" than others that have the a & v in one file. Make sure you copied the whole top-leveL FOLDER and all sub-folders (not just the footage or contents of a folder) from the cam/card into the computer for AVCHD ... and then when you import into a project via the media browser your audio & video should be all connected by PrPro.
There have been numerous threads here where AVCHD users have "lost" their audio, only to find they'd simply left it behind by NOT copying all the folders & subfolders their camera had created.

Premier Pro CC can't edit XDCAM EX footage

Adobe: Please fix the bug that prevents Premiere Pro CC from playing XDCAM EX footage properly. It plays with glitches, pixelated, horrible, unusable.

I'm working with XDCAM HD (MXF from PDW700) and XDCAM (MP4 from EX3) in Premiere CC....
Everything works fine...maybe something wrong with your system?

Too much XDCAM EX clips on Premiere CS4

Hi,
I've problems working with XDCAM EX clips.
I am working with a timeline 1080i 50i XDCAM EX (SP) and when the project is over a hundred clips,
Premier Pro CS4 crashes every time I try to edit a clip.
What's the matter?
The configuration of my PC is as follows:
Motherboard: Asus P6T
CPU: Intel Core i7 CPU 920 @2.67GHz
Grapicboard: Ati Radeon HD 5700 1Gb video RAM
RAM: 12Gb
HardDisk
OS disk: 300Gb SataII
Project Disk: 2 Disk Raid 0
Scratch Disk: 2 Disk Raid 0
Software: Windows 7 Professional 64bit
Editing: Premiere Pro CS4 4.2.1
Thanks

So here is what I did. I have a JVC hm700 but I use the sony clip browser. When recording longer XDCAM EX footage the camera breaks it up into smaller clips (in the BVAP/clips/clipname_01... clipname_02 ext). When you import them into premiere it appears to be one clip.
What I did was take all of the mp4s out of their folders and created an orphan folder.
Then I opened up sony clip browser and imported the files into a new folder.
When it imports the files it creates new xml data and my 1:20:00 clip is now 7 clips.
When I import them into premier they import as 7 clips instead of one... they conform, a clip thumbnail appears....AND they PLAY IN THE TIMELINE!!!
Just line them up and they play seemlessly
It is a pain and a long process... especially on a 4 camera shoot that lasted 2 hrs.

Is there a way that i can downgrade my iOS 7.1 on my iPhone 4 to iOS 6xx? battery life not good, and performance isn't better than iOS 6.. Please apple i am really disappointed with iOS 7 on my iPhone 4

Is there a way that i can downgrade my iOS 7.1 on my iPhone 4 to iOS 6xx? battery life not good, and performance isn't better than iOS 6.. Please apple i am really disappointed with iOS 7 on my iPhone 4, it can runs great on iPhone above 4 such as 5/5s/etc.. iPhone 4 just good with iOS 6...

No.

I am trying to connect a Macbook Pro to a projector for a Powerpoint presentation. When I use a VGA cable, the color of the projected images are not good. When I use a USB cable, the projected image includes the presenter notes on my computer screen?

I am trying to connect a Macbook Pro to a projector for a Powerpoint presentation. When I use a VGA cable, the color of the projected images are not good. When I use a USB cable, the projected image includes the presenter notes on my computer screen?

To move an iPhoto Library to a new machine:
Link the two Macs together: there are several ways to do this: Wireless Network,Firewire Target Disk Mode, Ethernet, or even just copy the Library to an external HD and then on to the new machine...
But however you do choose to link the two machines...
Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
Then hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library'
and select the Library that you moved. That's it.
This moves photos, events, albums, books, keywords, slideshows and everything else.
Your first option didn't work because you imported one Library to another. Every version and thumbnail is imported like a distinct photo, you lose all your Albums, Keywords etc., the link between Original and Previews is destroyed, the non-destructive editing feature is ruined and so on. In summary: it's mess.
Your second option didn't work because you simply referenced her library on the old machine.
Regards
TD

Xdcam hd footage in premiere cc not good

Similar Messages

Maybe you are looking for