XDcam setting not showing in import

I have downloaded the XDCAM pluggin for Log and Transfer and it seems to be OK, but I can't get it to show in my import settings. I am using FCP 7.
Can someone tell me what I've missed?
Jeff

You may need to re-state your first question, it's not clear to me.
You use the Log & Transfer interface to import your XDCam files into FCP. Once these file are in FCP you can (and typically should) edit them into a Apple Pro Res sequence.
Yes, you can use these same steps to import EX3 clips

Similar Messages

  • LR4.3 does not show previously imported CR2 files (5D mark III) by trial version

    LR4.3 does not show previously imported CR2 files taken using 5D mark III by trial version.
    When tried to synchronize the files not show when browsing, the import window comes up. All the Jpeg files, Raw files are seen in the window. None of them are highlighted nor selectable. LR is assuming that those files are already imported but if imported they are being shown for browsing or editing

    Maybe you have set a Filter in LR. Press Ctrl-L once or twice to turn it off.
    Maybe you don't have "All Photographs" selected in the Catalog Panel on the left.

  • IOS 7 Calendar does not show appointments imported as VCS files in Microsoft Outlook / Exchange. Any solutions?

    iOS 7 Calendar does not show appointments imported as VCS files in Microsoft Outlook / Exchange in Windows 7. I discovered this when downloading itinerary.vcs files from Delta to mark flights in my calendar. The work around I found is as follows:
    Open the VCS file, this will create a Calendar entry in your Outlook,
    Open the created Outlook Calendar entry, go to File -> Save As and then select to save as ICS file.
    Delete original VCS-created appointment in your calendar to avoid multiple calendar.
    Open the re-saved ICS file.
    Appointment will now correctly synchronize with your iPhone iOS 7 calendar.
    If anyone has better alternatives to this process, please help out. Hopefully, Apple will fix this with the next iOS update.

    iOS 7 Calendar does not show appointments imported as VCS files in Microsoft Outlook / Exchange in Windows 7. I discovered this when downloading itinerary.vcs files from Delta to mark flights in my calendar. The work around I found is as follows:
    Open the VCS file, this will create a Calendar entry in your Outlook,
    Open the created Outlook Calendar entry, go to File -> Save As and then select to save as ICS file.
    Delete original VCS-created appointment in your calendar to avoid multiple calendar.
    Open the re-saved ICS file.
    Appointment will now correctly synchronize with your iPhone iOS 7 calendar.
    If anyone has better alternatives to this process, please help out. Hopefully, Apple will fix this with the next iOS update.

  • IPhoto does not show last import

    iPhoto does not show last import. When I try to re-import photos from a desktop file it says the photos are already in the iphoto library and cannot be imported. What do I do? I've already re-installed iPhoto 09 and run updates.

    Are you saying that the last import is not showing in the last import section of the source pane or is not in the Events in the library window? If you do not see the event then your camera has the wrong date - look in the last import album and find the date and then go to that date in the events - it will be there - if you want you can then slelect the photos and use the adjust time and date command to fix it - check change original files
    LN

  • Camera will not show for import in managed account

    In my administrator and one managed account, when I connect my kodak digital camera it displays for import. In another managed account despite enabling access to image capture, selecting iphoto for import in image capture and fixing permissions, neither image capture or iphoto show the kodak camera for import. I also tried removing the preference files from that user's library for iphoto and image capture. Help!

    Hi ckauf49!
    Thanks for the post.
    The camera may not show an image on the LCD screen if the camera is not set for live view shooting.  However, it will always display the menu on the screen if you press the MENU button.  If it does not, then the camera will need to be serviced.  To start this process, you'll need to complete a Repair Request on our website.
    This didn't answer your question? Find more help at Contact Us.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • ITunes 10.6.1 update does not show newly imported music in viewer but files are in iTunes media folder, how to correct?

    Updated to iTunes 10.6.1.7 today from 10.5 on a Win 7 SP1 64-bit machine and attempted to add new music to the library by both drag-n-drop and import files; this new music does not show up in the library viewer but has been added to the iTunes media folder. My iTunes 10.5 version was working properly prior to the update. Any recommendations to correct this issue? Thanks!

    Immediately after the install, Windows was rebooted. I also attempted multiple variations of closing and restarting iTunes and/or reboot Windows. iTunes was unresponsive to mp3 files being added. Since I was unable to see the added music files to the library, I did not try to add other files.
    Out of frustration, I let iTunes run over night and to my surprise the added music appeared in the library viewer the following morning.  I can now add new mp3 (and AAC also) music files to the library and it immediately appears in the viewer.  How or why it now works is a total mystery.

  • RAID Set not showing up - 3 severe events

    Intelle Xserve running 10.6 RAID Card running firmware v E-1.3.2.0, Two it drives set up with I think RAID 5.
    The main person for the  system is away as well as his backup. So I'm running on very little information at the moment.
    Log:
    Called in due to user not able to access shared files (Also shared FileMakerpro databases and Portfolio server). Only access to server was via screen share.
    Could not connect. After trying all that I could, powered down the server. Restarted, got a login startup permissions error for an item to run at startup. (I'll have to check what exactly that was). Started the Portfolia server and the FileMakerpro databases. Users able to access and use.
    Next day same thing. User lost connection with the server. Restarted, start filemakerpro databases and portfoilio services. User able to access.
    I suggest pulling over the files needed to work just in case it looses connection again, User starts to pull over some files which is transfering.
    About 15 minutes later I get a call that the user lost connection again.
    Restart the once again. This time get errors from the RAID utility:
    Non-viable RAID set RS1 and all associated volumes are offline
    Drive 3:500 missing - Replace immediately or acknowledge loss of RAID set RS1 and associated volumes
    Drive 3:500 missing - Previous drive status was inuse
    The RAID utility does not show a RAID set.
    The drive appear to be OK
    The drive shows up on the desktop but when I go into the drive the folders etc are showing. Access the main folder results in a loop where it bails out and just shows the desktop again.
    I'm going to get some files to the user from the timemachine backup for now.
    Is it possible that the data is OK and maybe the drive are marked off line for the set but still OK?
    Any info would be great,
    Thanks

    Yes the 160GB has the OS. I'm coming into this cold as the main person and the backup are currently away.
    I have got the users a work around so they can do thier work. The backup person has very limited email contact and he had thought it was a RAID 5.B  But I would agree this looks to be a RAID 0 or 1 since there are only two drive available for data.

  • Live!Surround speaker setting not showing in surround mixer for SB Live Platinum

    the Li've!Surround option for speaker settings in not showing in my Surround Mixer
    i have:
    Windows 2000 sp4
    SB Li've! Platinum 5.
    ASUS CUSL2
    Sound Blaster Li've! - Li'veDrvUni-Pack (English) SBLW-XPWEB-W4-US 28-Feb-03
    Installed the speaker preset for li've!surround but the only headphone, 2 speaker, 4 speaker, and 5. speaker shows up on speaker configuration of the Surround Mixer
    i've played the AC3 files on the cdrom and Dolby pro logic surround, I get sound from all fi've speakers on my Denon D-850 w/ Dolby surround pro-logic
    I can't use the surround mixer to test all the speakers, only front left and right speakers work on the test, i have to open to wav files directly to test the center speaker, the rear speaker test doesn't work from the wav file
    My Denon system only has analog stereo inputs, so this is my only option for letting Sound Blaster know I have 5 speakers.
    I've uninstalled all SB Li've software and drivers from the unipack, and reinstalled the orignal drivers and apps from the CD-ROM SBP5-CDSD-W-US MID : 32680 5-Sep-2000 and the Li've!Surround speaker setting reappears in the Surround Mixer.
    Is the Li've!Surround setting no longer available in the new Surround Mixer in Li'veDrvUni-Pack (English) SBLW-XPWEB-W4-US 28-Feb-03 ?
    Message Edited by klin on <SPAN class=date_text>2-2-2004 <SPAN class=time_text>06:4 AM
    Message Edited by klin on 2-2-2004 2:45 PM

    so I found this post...
    http://groups-beta.google.com/group/...7?dmode=source
    it seems Li've Surround is no longer supported in the new drivers
    ....so what would be the best setting to play ac3 files or DVD's through my receiver with only 2 analog inputs (left and right) available w/ Dolby surround prologic. Should I set it to 2 speaker or 4 speaker setting in the Surround Mixer in order to send the best signal to the prologic decoder on my receiver with 5 speakers (2 front, center, 2 rear)

  • Check mark not showing after importing in Image Capture

    The check marks will show right after importing photos to a hard drive in Image Capture. However, after unplugging my iPhone and plugging it back in to import new photos, the check marks are not showing up for the photos I have already imported. One way I was successful at getting the check marks to show was to select another folder to import to and then select the folders that contain the imported images.

    CDs don't contain artwork, you can either add the artwork manually or (if the album is available in the iTunes store) you can have iTunes download it automatically from there. You'll get information on both methods at this link: <<a href="http://docs.info.apple.com/article.html?path=iTunesMac/8.0/en/15298.html" >iTunes for Mac - Adding artwork to songs and other items

  • Pasted image does not show when imported to AI

    Mac OS 10.4.11 - Acrobat CS4. I made a contact sheet of images in Bridge which was saved as a PDF. In Acrobat I pasted another image (different size ratio) and saved again. However, when I placed the image in Illustrator the pasted image did not show, only the original contact images. It does not show at preview level either, but when the PDF is opened it is definitely there. I tried to 'flatten' it but cannot find a option that works.See attached file.

    I would love to help you, but I'm totally lost as to what you are trying to do.
    Here are my questions:
    Mac OS 10.4.11 - Acrobat CS4.
    There really isn't an Acrobat CS4. There is Acrobat 9 that shipped with CS4. But let's go one.
    I made a contact sheet of images in Bridge which was saved as a PDF.
    OK, that's good, I understand what you're doing.
    In Acrobat I pasted another image (different size ratio) and saved again.
    OK, this is where you lost me. Acrobat does not have a paste image ability. Exactly how did you get that image onto the Acrobat page? You copied from where? You pasted how? This is totally screwey.
    However, when I placed the image in Illustrator the pasted image did not show, only the original contact images.
    Placed what image? The original PDF contact sheet? Why are you trying to put it into Illustrator? There's no reason I can think of to do such a thing.
    PDF is usually the final output form. It isn't a page layout tool to place into other programs.
    It does not show at preview level either, but when the PDF is opened it is definitely there.
    Still trying to figure out what you talking about.
    I tried to 'flatten' it but cannot find a option that works.See attached file.
    You have totally lost me. There is no "flatten" in PDF? That's in Photoshop? What are you doing???

  • Raw and jpeg will not show when imported from camera

    I am doing a OCA degree in digital photography using aperture 3 . I have been asked to take Raw and J pag , open up in the program I use. And not the differance and the make changes.
    I have 1d MK III and 7 d     I cannot get both file types to show side by side..   Some one tell me how to do this please. I must have clicked , ticked something , that I cannot find to put right again.

    As always, start by copying the images on to a folder on the hard drive and then backing up the folder. Never import directly from camera or card into Aperture or any other images app.
    Then since this is an exercise not a batch workflow, simply rename the RAW and JPEG versions of one image and separately import each renamed version into Aperture. The two should each be Masters, one from the JPEG original and one from the RAW original.
    Note the JPEG may initially "look" better on the (relatively low resolution) display due to in-camera presets like sharpening, etc. not present in the RAW file. However the RAW file contains much more image data, is much more editable and is capable of making superior (relatively very high resolution) hard copy prints.
    HTH
    -Allen Wicks

  • IMovie not Showing recently imported iPhoto videos

    Hello. I am trying to view FLIP videos I recently imported into iPhoto within the iMovie app. I can see a few from 2008 and 2009 but not the entire collection. I believe the iphoto videos iMovie is showing me came from a Sony Hard Drive camera. Any ideas? Any thoughts? Thanks.

    I decided to import all the original AVIs and they worked OK (except one folder the thumbnails were all black so had to regenerate thumbnails and is OK now).
    So assume there must have been a problem with some of the .mp4 files, even though I ran the conversion of all AVIs the same time with same settings.

  • Tab Set not showing for Parent Tab - Bug?

    Greetings,
    (I figured someone else has experienced this issue, but after searching with multiple words I haven't found a thread.)
    Using Application Express 4.0.2.00.07. The application in question is using Theme 7 - Modern Blue
    My APEX application has over 20 pages and a lot of tabs, so I decided to create 2 new parent tabs (for a total of 3 parent tabs) and then assign the tabs to different tab sets so that I won't run out of horizontal space for all the tabs.
    As best that I can tell everything with the parent tabs is set up correctly. I even had another developer look over everything I set up. The two newly created 2 parent tabs don't show their tab set of tabs when I click them. The parent tab that was first created still works, but not the 2 new ones. When we maintain everything via the tab interface everything looks OK, but when we look at the pages they are still assigned to the original tab and I don't see a way to change the tab set on the page level. We copied and deleted a page and when we did the page and its tab displays with the correct parent tab.
    Is this a bug? It seems to be. It seems that creating the parent tab does not cascade down to the page level.
    Also, regardless if it is a bug, is there a way to change the tab set at the page level? I hate to copy a lot of pages and delete the orignal pages, but maybe that's the only work around.
    Also, maybe this is a theme issue? I know that some themes don't handle certain aspects correctly.
    Thanks, Tony

    I think I figured it out. There is a section on the page where you can change the Tab Set. It is under Display Attributes.

  • System preferences default icons set not showing when modifying user account icon

    Hi!
    I was willing to change my account icon and went into system preferences, accounts and groups, open my account and clicked on the icon in order to change it.
    To my surprise there was no default icons showing.
    All the icons are in their place in System/Lybrary/User Pictures/ but it seems there is not any info connecting them to the default icon set when modifying the accounts icon. The problem is on all the accounts.
    I updated the system to 10.8.2 and the problem is still there.
    I already did the permission verification and the only one which is alwasy appearing (even after repair) is someone related to "ruby".
    I can give more details if needed.
    Thank you everybody for your help.

    Thanks Bernard,
    It works fine with JInitiator but not working with
    the JPI. For JPI what settings I need to do ??hi TKARIM and Bernard, i am having similar problem even with the Bernard's recommended setup. could you post the webutiljini.htm (i presume you are using config=test) ?
    i am actually using jinitiator 1.3.1.28 with Oracle HTTP Server of OAS 10gR2) calling Forms Server 6i (f60cgi). After setting up according to Bernard's recommended setup steps, the java console showed that it loaded the icon jar file when it could not read the form, but it skipped the loading of the icon jar file once it read and started the form. How do we specify in the form to pick up the icon from the jar file instead from a directory ? Or do we need to specify ? Any ideas ?
    Thx and Regards
    dkklau

  • Preview thumbnails (CR2) does not show in import dialog box

    When I import files from my camera ("Import photos from device..."), i don't see preview thumbnails of CR2-files so that I can choose which pictures to import. I can only see gray boxes. JPG thumbnails show.
    I tried to download and install the Canon RAW codecs for Vista  (http://www.canon-europe.com/vista/eos/raw_codec/), but it didn't help.
    Appreciate all help with this problem.
    Nils Öhman
    Equipment:
    Canon EOS 400D
    Adobe Photoshop Lightroom 2.4
    Windows Vista SP2, Swedish version
    HP EliteBook 8530w

    the RAW Codecs for Vista have no effect on Lightroom which should handle and preview files from a 400D without any issues . There may be a problem caused by the fact that you are downloading via your camera rather than from the card. I would suggest using a card reader rather than downloading from your camera.

Maybe you are looking for