Xdtv schedule record don't work[solved]

I have used xdtv for 2 years but just have the problem recently. When I scheduled a record in xdtv, it just didn't start record when the scheduled time came. I have atd and crond running.
It happens after a fresh install of archlinux at September.
Anyone else experience this?
Last edited by mukwing (2007-10-30 18:35:06)

Oh, it is solved. I don't know why, anyway, it works now.

Similar Messages

Scheduling scenarios don't work after upgrading 10.1.3.5 to 11.1.1.6...

Hello~
I upgraded ODI version 10.1.3.5 to 11.1.1.6 without any error.
However although I restart agent, scheduling scenarios don't work on time.
So I regenerated one of scenario using ODI studio menu and then this scenario worked successfully on scheduled time.
After upgrading, do I have to regenrate whole scenarios?
Isn't there any other workaround?
Edited by: user612431 on 2012. 5. 15 오후 10:42
Edited by: user612431 on 2012. 5. 16 오전 2:29

Hi, I have copied the jar file in users/appdata/.../userlib also. But let me go through this document and see what it says. I will get back to you. Thank you very much.
But tell me if I understood this correclty:
Inorder to upgrade from 10.1.3.5 to 11.1.1.6, I have executed the following steps so far:
1) I ran the RCC on my old repositories to check if they are consistent to migrate and it was successful.
2) Copied the E*,M*,W* xml files that RCC created into the oracledi.common\...\sqlserver\patch\ and oracledi.sdk\...\sqlserver\patch folders.
3) Cloned the existing master and work reps of 10g.
4) Installed the ODI 11g, but did not create the master rep and Work rep in 11g hoping that I would upgrade the existing cloned 10g repositories.
Now my understanding after going through some documents online is that UA uses the cloned repository details (master and from there it gets the work rep details) and 10g supervisor details that we provide and connects to cloned master and work reps and upgrades them. I do not know what this jdbc error is? Because I tried and could also create a brand new master repository in the 11g using ODI studio, now if 11g could not connect to DB using the jdbc how could it have created the repository. If 11g connects to DB I am assuming that UA should also be able to connect right?
Please correct me if my assumptions are wrong.
Thanks
V

Grub2 theme packages in the AUR don't work [SOLVED]

I have grub2 installed as per the wiki page. I can't get the distroballs theme working, just an endless string of reboots.
EDIT: Nevermind - it would seem as though all the themes in the AUR were written before the grub2 1.98 package made it into [extra] and require a package that has been removed from the AUR.
Last edited by graysky (2010-11-14 11:16:35)

I just noticed the same thing. Hope they plan to update them.

Speakerphone problem - lost voice from speakerphone while playing music or gaming youtube, while call or voice recording playing - all works fine, so speakerphone is working but not on all apps. hard reset done - no changes

or gaming youtube, while call or voice recording playing - all works fine, so speakerphone is working but not on all apps. hard reset done - no changes.
iphone 4
SOLVED plugin to charger solved it - so problem was with contacts -- no idea why - phone is new - no water - no havy dust - usual using
hope will never return. Thanks

We checked it with an iPhone 5 in house multiple times and could not reproduce this Problem. Must be something specific to your device. Maybe your speakerphone volume is turned down completely?
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

MSI TV @nywhere Plus - Scheduled Recording not working

I just installed TV Anywhere Plus on my new Windows 7 PC, and everything works fine, except for the "Scheduled Recording" button. Has anybody experienced that before? What could be the problem?

Quote from: blazing storm on 07-February-10, 04:51:17
What exactly happens when you click the button?
Do you have the latest drivers installed for your card?
http://eu.msi.com/index.php?func=downloaddetail&type=driver&maincat_no=132&prod_no=616
The problem was that when I click the button nothing happened. But now it does.
I installed the driver as on the website you gave me.
Seems that [probloem is solved with that.
Thanks

[SOLVED] Keyboard-shortcuts "alt+." and "alt+d" don't work under X11

Hi,
I switched from gentoo to archlinux and everything is running fine except my following really annoying problem:
The keycombinations "alt+." (insert the last parameter from the line before) and "alt+d" (delete the word under the cursor) don't work under X11 (in my xterm).
They work before I start X with bash and zsh btw...
My "/etc/X11/xorg.conf.d/20-keyboard.conf" looks like
Section "InputClass"
Identifier "keyboard"
MatchIsKeyboard "yes"
Option "XkbLayout" "de"
Option "XkbModel" "pc105"
Option "XkbVariant" "nodeadkeys"
Option "XkbOptions" "terminate:ctrl_alt_bksp"
EndSection
It is really annoying without these keys working and I have no clue where to look. Can anyone give me a hint?
Thanks
Last edited by eistaucher (2015-06-03 06:39:22)

flipflop wrote:
Did you set "XTerm*metaSendsEscape: true" [0]?
[0] https://wiki.archlinux.org/index.php/Xt … l_Variable
Thank you @flipflop. This solved my problem!

[SOLVED] Poweroff, suspend and hibernate don't work

I installed Archlinux on my work desktop on Monday and can't get poweroff, suspend and hibernate to work. The command `systemctl poweroff` sort of works, except it doesn't actually turn off the computer. Suspend and hibernate don't work at all, the computer hangs on the terminal with a cursor on the top left corner of the screen. Here is the log from `journalctl`. There doesn't seem to be any error messages in it, as far as I can see.
Apr 16 10:02:55 carolfs-ifusp sudo[1127]: carolfs : TTY=pts/0 ; PWD=/home/carolfs ; USER=root ; COMMAND=/usr/bin/systemctl poweroff
Apr 16 10:02:55 carolfs-ifusp sudo[1127]: pam_unix(sudo:session): session opened for user root by carolfs(uid=0)
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping Session c2 of user carolfs.
Apr 16 10:02:55 carolfs-ifusp gnome-session[576]: Received signal:15->'Terminated'
Apr 16 10:02:55 carolfs-ifusp org.gnome.evolution.dataserver.Sources3[591]: Received terminate signal.
Apr 16 10:02:55 carolfs-ifusp colord[453]: Automatic remove of icc-9cb50954c1872204852075bef0599dec from xrandr-Goldstar Company Ltd-W2043-16843009
Apr 16 10:02:55 carolfs-ifusp colord[453]: Profile removed: icc-9cb50954c1872204852075bef0599dec
Apr 16 10:02:55 carolfs-ifusp colord[453]: device removed: xrandr-Goldstar Company Ltd-W2043-16843009
Apr 16 10:02:55 carolfs-ifusp polkitd[358]: Unregistered Authentication Agent for unix-session:c2 (system bus name :1.37, object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8) (disconnected from bus)
Apr 16 10:02:55 carolfs-ifusp ntpd[300]: ntpd exiting on signal 15
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopped Session c2 of user carolfs.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping Session c1 of user gdm.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopped Session c1 of user gdm.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping Sound Card.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopped target Sound Card.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping system-systemd\x2dfsck.slice.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Removed slice system-systemd\x2dfsck.slice.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping system-getty.slice.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Removed slice system-getty.slice.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping User Manager for UID 1000...
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping Disk Manager...
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping Login Service...
Apr 16 10:02:55 carolfs-ifusp systemd[567]: Stopping Default.
Apr 16 10:02:55 carolfs-ifusp systemd[386]: Stopping Default.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping Login Prompts.
Apr 16 10:02:55 carolfs-ifusp systemd[567]: Stopped target Default.
Apr 16 10:02:55 carolfs-ifusp systemd[386]: Stopped target Default.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopped target Login Prompts.
Apr 16 10:02:55 carolfs-ifusp systemd[567]: Stopping Basic System.
Apr 16 10:02:55 carolfs-ifusp systemd[386]: Stopping Basic System.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping GNOME Display Manager...
Apr 16 10:02:55 carolfs-ifusp systemd[567]: Stopped target Basic System.
Apr 16 10:02:55 carolfs-ifusp systemd[386]: Stopped target Basic System.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Starting Generate shutdown-ramfs...
Apr 16 10:02:55 carolfs-ifusp systemd[567]: Stopping Paths.
Apr 16 10:02:55 carolfs-ifusp systemd[386]: Stopping Paths.
Apr 16 10:02:55 carolfs-ifusp systemd[567]: Stopped target Paths.
Apr 16 10:02:55 carolfs-ifusp systemd[386]: Stopped target Paths.
Apr 16 10:02:55 carolfs-ifusp systemd[567]: Stopping Timers.
Apr 16 10:02:55 carolfs-ifusp systemd[386]: Stopping Timers.
Apr 16 10:02:55 carolfs-ifusp systemd[567]: Stopped target Timers.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopped RealtimeKit Scheduling Policy Service.
Apr 16 10:02:55 carolfs-ifusp systemd[386]: Stopped target Timers.
Apr 16 10:02:55 carolfs-ifusp systemd[567]: Stopping Sockets.
Apr 16 10:02:55 carolfs-ifusp systemd[386]: Stopping Sockets.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopped Locale Service.
Apr 16 10:02:55 carolfs-ifusp systemd[567]: Stopped target Sockets.
Apr 16 10:02:55 carolfs-ifusp systemd[386]: Stopped target Sockets.
Apr 16 10:02:55 carolfs-ifusp systemd[567]: Starting Shutdown.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopped Disk Manager.
Apr 16 10:02:55 carolfs-ifusp systemd[386]: Starting Shutdown.
Apr 16 10:02:55 carolfs-ifusp systemd[567]: Reached target Shutdown.
Apr 16 10:02:55 carolfs-ifusp systemd[386]: Reached target Shutdown.
Apr 16 10:02:55 carolfs-ifusp systemd[567]: Starting Exit the Session...
Apr 16 10:02:55 carolfs-ifusp systemd[386]: Starting Exit the Session...
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping Network.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopped target Network.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping dhcpcd on all interfaces...
Apr 16 10:02:55 carolfs-ifusp systemd[567]: Received SIGRTMIN+24 from PID 1159 (kill).
Apr 16 10:02:55 carolfs-ifusp systemd[386]: Received SIGRTMIN+24 from PID 1160 (kill).
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopped User Manager for UID 120.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopped User Manager for UID 1000.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping user-1000.slice.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Removed slice user-1000.slice.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping user-120.slice.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Removed slice user-120.slice.
Apr 16 10:02:55 carolfs-ifusp dhcpcd[1161]: sending signal TERM to pid 264
Apr 16 10:02:55 carolfs-ifusp dhcpcd[1161]: waiting for pid 264 to exit
Apr 16 10:02:55 carolfs-ifusp dhcpcd[264]: received signal TERM from PID 1161, stopping
Apr 16 10:02:55 carolfs-ifusp dhcpcd[264]: eno1: removing interface
Apr 16 10:02:55 carolfs-ifusp systemd[387]: pam_unix(systemd-user:session): session closed for user gdm
Apr 16 10:02:55 carolfs-ifusp systemd[568]: pam_unix(systemd-user:session): session closed for user carolfs
Apr 16 10:02:55 carolfs-ifusp gnome-session[576]: Received signal:15->'Terminated'
Apr 16 10:02:55 carolfs-ifusp gdm-session-worker[383]: <3>GLib: Source ID 71 was not found when attempting to remove it
Apr 16 10:02:55 carolfs-ifusp gdm-Xorg-:0[336]: (II) evdev: AT Translated Set 2 keyboard: Close
Apr 16 10:02:55 carolfs-ifusp gdm-Xorg-:0[336]: (II) UnloadModule: "evdev"
Apr 16 10:02:55 carolfs-ifusp gdm-Xorg-:0[336]: (II) evdev: Microsoft Microsoft Basic Optical Mouse : Close
Apr 16 10:02:55 carolfs-ifusp gdm-Xorg-:0[336]: (II) UnloadModule: "evdev"
Apr 16 10:02:55 carolfs-ifusp gdm-Xorg-:0[336]: (II) evdev: Power Button: Close
Apr 16 10:02:55 carolfs-ifusp gdm-Xorg-:0[336]: (II) UnloadModule: "evdev"
Apr 16 10:02:55 carolfs-ifusp gdm-Xorg-:0[336]: (II) evdev: Power Button: Close
Apr 16 10:02:55 carolfs-ifusp gdm-Xorg-:0[336]: (II) UnloadModule: "evdev"
Apr 16 10:02:55 carolfs-ifusp org.freedesktop.Tracker1[591]: Received signal:15->'Terminated'
Apr 16 10:02:55 carolfs-ifusp dhcpcd[1161]: dhcpcd[1161]: sending signal TERM to pid 264
Apr 16 10:02:55 carolfs-ifusp dhcpcd[1161]: dhcpcd[1161]: waiting for pid 264 to exit
Apr 16 10:02:55 carolfs-ifusp dhcpcd[264]: exited
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopped Login Service.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: dhcpcd.service: main process exited, code=exited, status=1/FAILURE
Apr 16 10:02:55 carolfs-ifusp mkinitcpio[1145]: ==> Starting build: none
Apr 16 10:02:56 carolfs-ifusp mkinitcpio[1145]: -> Running build hook: [sd-shutdown]
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped dhcpcd on all interfaces.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unit dhcpcd.service entered failed state.
Apr 16 10:02:56 carolfs-ifusp gdm-Xorg-:0[336]: (II) NVIDIA(GPU-0): Deleting GPU-0
Apr 16 10:02:56 carolfs-ifusp gdm-Xorg-:0[336]: (EE) Server terminated successfully (0). Closing log file.
Apr 16 10:02:56 carolfs-ifusp gdm[295]: Freeing conversation 'gdm-password' with active job
Apr 16 10:02:56 carolfs-ifusp gdm[295]: Freeing conversation 'gdm-launch-environment' with active job
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped GNOME Display Manager.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Permit User Sessions...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Permit User Sessions.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Basic System.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped target Basic System.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Slices.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped target Slices.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping User and Session Slice.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Removed slice User and Session Slice.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Paths.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped target Paths.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Forward Password Requests to Wall Directory Watch.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Forward Password Requests to Wall Directory Watch.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Dispatch Password Requests to Console Directory Watch.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Timers.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped target Timers.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Daily man-db cache update.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Daily man-db cache update.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Daily verification of password and group files.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Daily verification of password and group files.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Daily rotation of log files.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Daily rotation of log files.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Daily Cleanup of Temporary Directories.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Daily Cleanup of Temporary Directories.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Sockets.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped target Sockets.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Device-mapper event daemon FIFOs.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Closed Device-mapper event daemon FIFOs.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping LVM2 metadata daemon socket.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Closed LVM2 metadata daemon socket.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping D-Bus System Message Bus Socket.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Closed D-Bus System Message Bus Socket.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping System Initialization.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped target System Initialization.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Apply Kernel Variables...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Apply Kernel Variables.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Setup Virtual Console...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Setup Virtual Console.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Encrypted Volumes.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped target Encrypted Volumes.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Load/Save Random Seed...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Update UTMP about System Boot/Shutdown...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Swap.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped target Swap.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivating swap Swap Partition...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivating swap Swap Partition...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivating swap Swap Partition...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivating swap Swap Partition...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivating swap Swap Partition...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivating swap Swap Partition...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Remote File Systems.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped target Remote File Systems.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Load/Save Random Seed.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Update UTMP about System Boot/Shutdown.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Create Volatile Files and Directories...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Create Volatile Files and Directories.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Local File Systems.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped target Local File Systems.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounting /run/user/1000/gvfs...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounting /run/user/120...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounting /boot...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounting /home...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounting Temporary Directory...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivated swap /dev/disk/by-partuuid/748828e6-d06b-4dc9-a1ee-94e2bf6e2d41.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivated swap /dev/disk/by-partlabel/swap.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivated swap /dev/disk/by-id/wwn-0x5000c500242cde85-part2.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivated swap /dev/disk/by-id/ata-ST3500418AS_5VM96G8V-part2.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivated swap /dev/disk/by-uuid/59c506eb-3a40-4eae-8048-317bcc3d00fb.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivated swap Swap Partition.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounted /run/user/1000/gvfs.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounted Temporary Directory.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounting /run/user/1000...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounted /run/user/120.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounted /boot.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping EFI System Partition Automount.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unset automount EFI System Partition Automount.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounted /run/user/1000.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounted /home.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Starting Unmount All Filesystems.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Reached target Unmount All Filesystems.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Local File Systems (Pre).
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped target Local File Systems (Pre).
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Remount Root and Kernel File Systems...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Remount Root and Kernel File Systems.
Apr 16 10:02:56 carolfs-ifusp mkinitcpio[1145]: ==> Build complete.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Started Generate shutdown-ramfs.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Starting Shutdown.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Reached target Shutdown.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Starting Final Step.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Reached target Final Step.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Starting Power-Off...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Shutting down.
Apr 16 10:02:56 carolfs-ifusp systemd-shutdown[1]: Sending SIGTERM to remaining processes...
Apr 16 10:02:56 carolfs-ifusp systemd-journal[166]: Journal stopped
Last edited by CFS (2014-05-08 12:57:13)

Thank you for your replies. Shutdown now doesn't turn the computer off either. About the type of system, I think it was custom built. This is a new install from Monday, so I didn't update the kernel. Poweroff, suspend and hibernate have never worked. The requested output:
$ uname -a
Linux carolfs-ifusp 3.14.1-1-ARCH #1 SMP PREEMPT Mon Apr 14 20:40:47 CEST 2014 x86_64 GNU/Linux
$ pacman -Qi linux
Name : linux
Version : 3.14.1-1
Description : The Linux kernel and modules
Architecture : x86_64
URL : http://www.kernel.org/
Licenses : GPL2
Groups : base
Provides : kernel26=3.14.1
Depends On : coreutils linux-firmware kmod mkinitcpio>=0.7
Optional Deps : crda: to set the correct wireless channels of your country
Required By : nvidia
Optional For : None
Conflicts With : kernel26
Replaces : kernel26
Installed Size : 71136.00 KiB
Packager : Tobias Powalowski <[email protected]>
Build Date : Mon 14 Apr 2014 03:42:52 PM BRT
Install Date : Mon 14 Apr 2014 07:50:11 PM BRT
Install Reason : Explicitly installed
Install Script : Yes
Validated By : Signature

Outlook 2011 send/receive schedules don't work

I have to manually send/receive email since I upgraded to OS LION. Schedules don't work anymore, whatever I tried. Anyone with the same problem?

I use the following settings in Outlook and they work without problem. It may be that you will need to delete the account and set it up again. If you do delete it make sure that you back up any emails that are on your computer.
Your Name
Email address: Full btinternet email address
Account type: IMAP or (POP)
Incoming server: mail.btinternet.com
Outgoing server: mail.btinternet.com
Logon information:
User name: prefix only of email address
Password: Email password
Tick remember password
Do not tick Require password auth (SPA)
Click Button More settings
Tick box my out going server requires authentication
Tick box use same as incoming
Do not tick log onto incoming server
Advanced Button
Incoming server 993 or (POP 995) Tick requires SSL
Outgoing server 465 Use following type encryption SSL

Graphics card Quadro K4200 don't work with cuda in Adobe Premiere CS 6 version 6.0.5. Maybe they are bad drivers for graphics card? How to solve this problem?

I have purchased graphics card Quadro K4200, but graphics card don't work with cuda in Adobe Premiere CS 6 version 6.0.5. Maybe they are bad drivers for graphics card? How to solve this problem?

Did you use the nVidia Hack http://forums.adobe.com/thread/629557

License installed: Memleak & JRA Recording still don't work on remote srv

This a JRockit 28.1.1 version on a remote server.
As noted, a "LIC-JRMC50" license has been installed into its jre, but the memory leak and jra recording functions from the local xp based Mission Control 3.0.5 still don't work.
The connector to the remote server is working, as I can open console and see its workings.
When attempting to start Memory Leak an error is shown:
Caused by: javax.management.InstanceNotFoundException: bea.jrockit.management:type=MemLeak
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.getMBean(DefaultMBeanServerInterceptor.java:1094)
When trying to start JRA Recording a message is shown that says something like "No Options could be retrieved for this connector. Make sure you're connected to a Jrockit instance..".
Any suggestions would be appreciated.

JRockit 28.1.1 should work better with Mission Control 4.0.1 (which should be bundled together with JRockit R28.1.1)
JRockit 27 versions use JRA, JRockit 28 versions use FlightRecorder instead.
Mission Control 4.0.1 requires not license file.
Klara, Mission Control QA

[SOLVED] Face icons don't works in KDM

Hello,
I have configured Oxygen theme in KDM for view the face icons, but the icons don't works. I have KDE 4.9.4.
How can I solve this?.
Best regards.
Last edited by yoburtu (2013-01-03 11:12:00)

oboedad55 wrote:
yoburtu wrote:
Hello,
I have configured Oxygen theme in KDM for view the face icons, but the icons don't works. I have KDE 4.9.4.
How can I solve this?.
Best regards.
Could you please provide more information? I'm not really sure what you're trying to do.
I have configured avatar in my profile from system preferences from KDE, but don't view in KDM. I send kdmrc file:
[General]
ConfigVersion=2.4
ConsoleTTYs=tty1,tty2,tty3,tty4,tty5,tty6
GreeterUID=kdm
PidFile=/var/run/kdm.pid
ReserveServers=:1,:2,:3
ServerVTs=-7
StaticServers=:0
[Shutdown]
BootManager=None
HaltCmd=/sbin/shutdown -h -P now
RebootCmd=/sbin/shutdown -r now
[X-*-Core]
AllowNullPasswd=false
AllowRootLogin=false
AllowShutdown=Root
AutoReLogin=false
ClientLogFile=.xsession-errors-%d
Reset=/usr/share/config/kdm/Xreset
Session=/usr/share/config/kdm/Xsession
SessionsDirs=/usr/share/config/kdm/sessions,/usr/share/apps/kdm/sessions
Setup=/usr/share/config/kdm/Xsetup
Startup=/usr/share/config/kdm/Xstartup
[X-*-Greeter]
AntiAliasing=false
ColorScheme=
FaceSource=PreferAdmin
FailFont=Sans Serif,10,-1,5,75,0,0,0,0,0
ForgingSeed=1356806206
GUIStyle=
GreetFont=Serif,20,-1,5,50,0,0,0,0,0
GreetString=Bienvenido a %s en %n
GreeterPos=50,50
HiddenUsers=
Language=es
LogoArea=Logo
LogoPixmap=/usr/share/apps/kdm/pics/kdelogo.png
MaxShowUID=65000
MinShowUID=500
Preloader=/usr/bin/preloadkde
SelectedUsers=
ShowUsers=NotHidden
SortUsers=true
StdFont=Droid Sans,10,-1,5,50,0,0,0,0,0
Theme=/usr/share/apps/kdm/themes/oxygen
UseBackground=true
UseTheme=true
UserCompletion=false
UserList=true
[X-:*-Core]
AllowNullPasswd=true
AllowShutdown=All
NoPassEnable=false
NoPassUsers=
ServerArgsLocal=-nolisten tcp
ServerCmd=/usr/bin/X -br -novtswitch -quiet
[X-:*-Greeter]
AllowClose=false
DefaultUser=mari
FocusPasswd=true
LoginMode=DefaultLocal
PreselectUser=Previous
[X-:0-Core]
AutoLoginEnable=false
AutoLoginLocked=false
AutoLoginUser=
ClientLogFile=.xsession-errors
[Xdmcp]
Enable=false
Willing=/usr/share/config/kdm/Xwilling

[Solved]Keyboard layout screwed up and some keys don't work

After I reinstalled xorg-server 1.5.3-1 and installed xf86-input-evdev 2.0.1-1 and xf86-input-keyboard 1.3.1-1 some of my keys don't work and keyboard layout screwed up. I had finnish (fi) layout, but now it's "us". Arrows, insert- delete- home- end- pg up- pg down- print screen- scroll lock- pause- keys don't work. All characters behind Alt Gr + "" don't work either.
How to fix this?
Last edited by Sotamarsu (2008-11-08 13:57:25)

brother fixed it with next code
<?xml version="1.0" encoding="UTF-8"?>
<deviceinfo version="0.2">
<device>

<match key="info.capabilities" contains="input.keys">


<merge key="input.x11_options.XkbRules" type="string">base</merge>
<merge key="input.x11_options.XkbModel" type="string">evdev</merge>
<merge key="input.x11_options.XkbLayout" type="string">fi</merge>
<append key="input.x11_options.XkbOptions" type="strlist">altwin:menu</append>

</match>
</device>
</deviceinfo>
Last edited by Sotamarsu (2008-11-08 13:59:18)

[Solved] PCMCIA gprs/edge and wvdial, don't work

Hi all...
I have bought a pcmcia gprs/edge Lightspeed EDGE-100M, but don't work.
I load the modules pcmcia, pcmcia_core, rsrc_nonstatic, yenta_socket (I have found they whit hwdetect --show-pcmcia).
PCMCIA it comes recognized like ttyS0.
I run wvdial but I got "Modem not responding".
I have also added line "options usb_serial vendor=0x0279 product=0x950b" into /etc/modprobe.conf but I don't got any results.
Thanks
/etc/wvdial.conf
[Dialer Defaults]
Modem = /dev/ttyS0
Baud = 230400
Init1 = ATZ
Init2 = ATQ0 V1 E1 &C1 &D2 +FCLASS=0
Init3 = AT+CGDCONT=1,"IP","ibox.tim.it"
Dial Command = ATDT
Phone = *99***1#
Username = no_user
Password = no_pwd
ISDN = 0
Modem Type = Analog Modem
/var/log/messages.log
Oct 1 03:14:58 bash-laptop pccard: PCMCIA card inserted into slot 0
Oct 1 03:14:58 bash-laptop pcmcia: registering new device pcmcia0.0
Oct 1 03:14:59 bash-laptop ttyS0: detected caps 00000700 should be 00000100
Oct 1 03:14:59 bash-laptop 0.0: ttyS0 at I/O 0x400 (irq = 3) is a 16C950/954
Oct 1 03:14:59 bash-laptop logger: /lib/udev/bluetooth_serial: setserial or hciattach not executable, cannot start /dev/tts/0
Last edited by ilpianista (2008-02-28 21:04:57)

I have resolved
http://www.deelab.org/bash/2007/10/07/p … -on-linux/
Last edited by ilpianista (2008-02-28 21:04:40)

Links don't work zoomed, issue not solved?

I've been waiting for months on this issue;
when zoomed, zoomed to anything, links don't work in Safari.
I was told months ago, something is wrong with Safari toolkit.
I just updated and issue remains.
(just amazing)
<Edited by Host>

HI,
Try maintenance... the link works perfect here; Safari 4.0.5 SL 10.6.2
From the Safari Menu Bar, click Safari / Empty Cache. When you are done with that...
From the Safari Menu Bar, click Safari / Reset Safari. Select the top 5 buttons and click Reset.
Go here for trouble shooting *3rd party plugins or input managers* which might be causing the problem. Safari: Add-ons may cause Safari to unexpectedly quit or have performance issues
Since you are running Snow Leopard, *make sure Safari is opening in 32-bit mode, not 64.* Right or control click the Safari icon in the Applications folder, then click: Get Info In the Get Info window click the black disclosure triangle next to General so it faces down. Select 32 bit mode. Also, (in that same window) *make sure Safari is NOT running in Rosetta.*
  Web pages now include a small icon or 'favicon' which is visible in the address bar and next to bookmarks. These icons take up disk space and slow Safari down. It is possible to erase the icons from your computer and start fresh. *To delete Safari's icon cache using the Finder, open your user folder, navigate to ~/Library/Safari/ and move this file "webpageIcons.db to the Trash.*
bpageIcons.db to the Trash.*
Carolyn

[SOLVED] CTRL+ALT+F? don't working

I don't know when it stopped to work, but today I needed use CTRL+ALT+F? to log in text mode, and it does not work. I don't know where I need start my investigation.
System updated every day (and today too).
Thanks for any help.
Last edited by mkanada (2010-12-17 09:59:47)

I'm using kdm, kde. Even at kdm (before login), these keystrokes does not work. So, I think that the problem is with some wrong configuration with X, but I don't know.
I don't understood your second question 'show us where that keystroke is defined'. These keystrokes are pressed in KDM or KDE and don't work.

Xdtv schedule record don't work[solved]

Similar Messages

Maybe you are looking for