XENPAK-10G-LR does not switch off the laser

Hi.
We have a problem with the XENPAK-10G-LR that doesn't switch off the lasser in shutdown state, installed in 6509 with WS-X6704-10GE. The other side of the connection doesn't detects the shut.
I have checked that the X2-10G-LR disables the light, then the other side see the interface as down/down.
What is the cause?
Any method for disable the laser?
Regards.
Jose

Hi.
We have had the same problem in 7600 (12.2SR) and 6500 (12.2SX).
I checked the realase notes and field notices, without results.
As a workaround, you can activate 'ethernet oam' to check that link is really up (if the other box supports it).
Regards.
Jose

Similar Messages

My Mac Pro does not switch off.

It worked before Lion. Installed 10.7 and also upgraded to 10.7.1 but, on both cases, it does not switch-off. To be precise it "sometimes" switch-off but many times it does not. Let's say once on 15 times... With Leopard I nevere had this problem. (it persists also after a PRAM reset). I also run a second problem but only once and only upgrading to 10.7.1 (not to 10.7). It says that my RAM was on wrong position.. I had to remove and install the RAM again and it worked.
Any other case like this? (This append only on my MacPro - early 2009. On my MacBook and my MacBook Pro OSX Lion works fine).

Is there a pattern to the chimes, or are they simply random, as if the Mac is repeatedly rebooting on its own?
Have you tried a "Safe Boot"? Press and hold a Shift key as you power up the Mac. Does it start then?
If it starts at all "Safe Boot" will take much longer than usual, that's normal. Shutting down will take longer also. Try it.

ThinkCentre Edge 71, Power LED does not switch off

Since I have installed win7 64bit, the pc does not switch off after Power down command. For switch off i must hold the power button >10sec.
Thanks for Help.

Hello Walter,
Please update the BIOS which will resolve the issue.
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkcentre_bios/9qjy36usa.exe
You may also try the Windows registry setting. Kindly be careful while editing windows registry.
Have a look at the following registry location (note that you need to invoke regedit.exe with administrative privileges in order to make any changes in this location) and ensure that the value ClearPageFileAtShutdown is set to 0 (if it is set to 1, change the value to 0).
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management
Best Regards,
Tanuj
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

How do I get the page to shift up by as little as 1/8" so it does not cut off the bottom coding of

How do I get the page to shift up by as little as 1/8" so it does not cut off the bottom coding of official documents? There is usually plenty of white space at the top. Center command does not seem to help.

You cannot change pdf files in Reader. You can set it to print with a shrink to fit option.

Can I shrink the iTunes webpage on my PC monitor so it does not cut off the right and left margins?

Can I shrink the iTunes webpage on my PC monitor slightly so it does not cut off the right and left margins?

Can you? Are you capable of resizing the window?
Only you can answer that question.
If you want to know if it is possible, yes, it is possible.

The cooling fan comes on just after switching on and does not switch off any ideas

The cooling fan on my iMac comes on just after switching on and does not go off any ideas please?

Do a smc and pram reset, See if those fix it.

C4780 does not print off the internet

Since I upgraded to Windows 7 (64 bit HP laptop), the printer will not print off the internet. All other printing jobs work fine. I have uninstalled and reinstalled several times to no avail. I have also downloaded and installed the latest patch for computers that have upgraded to Windows 7. I have spent several hours with HP support both on the phone and online and they have been unable to solve this problem. Does anyone know what to do to fix this?

Hi,
are there any error messages displaying on the front panel display or on your PC screen?
what are you trying to print i.e.. are you printing from your PC or are you trying to print using the ePrint service (print apps direct from the front panel or sending an email to your printers email address)
If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
I am an HP employee.

WiFi issue: Is it possible to change WiFi settings in a way that it does not switch off in the screen-lock mode?

I have iPhone 4 and 4s. WiFi is automatically switching off on both phones when they are inactive (screens are locked). It is connecting back after some seconds I unlocke the phone. But because I have no subscribtion for the Cellular data usage, I am being cuted from Internet all screen-locked period. All that time people are not able to reach me by email, skype, or other programs using Internet. It is quite uncomfortable, especially when waiting for something important! Is there a way to change this setting?

The iPhone does not shut down WiFi completely when asleep. It does use a power conservation mode. You should still receive notifications. There is no setting for this. It should work for you as it does for me if you don't have a network problem.
There are lots of problems reported with D-Link routers and they don't have a great reputation. If there is no help available from D-Link you may want to consider installing the DD-WRT firmware. It's available for the D-Link 615. See here for information: http://www.dd-wrt.com/site/index
By the way, you do have Notifications enabled for the Apps you are talking about right? See Settings -> Notifications and Mail, etc.

OS X 10.4.3 running on iMAC G5 sometimes does not switch off

My i Mac G5 has been working nicely and smoothly and still does.. but recently it seems it does not won't to switch off....so I am forced to force it out.
At times a window appear saying more or less " the mirror agent is unable to log out due to elapsed time "
Any clues ? thanks - Massimo
Imac G5-1.6 ghz Mac OS X (10.4.3)
Imac G5-1.6 ghz Mac OS X (10.4.3)
Imac G5-1.6 ghz Mac OS X (10.4.3)

Welcome to Apple Discussions!
Force shutting down like that isn't wise. Eventually the directory may get damaged. If you had a force shut down for another reason that may have started the loop of having trouble. Backup your data, and follow these instructions for repair of the directory:
http://docs.info.apple.com/article.html?artnum=106214
If they don't work, you will want to get Alsoft Disk Warrior.

Mac does not switch off. Any idea how to fix this?

I already repaired the rights on the disk....
Mac does not drive down, obviously after certain programs have been started. One of those programs is itunes. I have to use the power switch button for switching it off. Mac can be driven down normally immediately after start-up.....Any idea what to do?

Yes, this was exactly the sequence and again it worked...
Here is the result of the ps ax command:
Last login: Fri May 25 09:22:33 on console
mbp081:~ web$ ps ax
PID   TT STAT      TIME COMMAND
    1   ?? Ss     0:01.98 /sbin/launchd
    9   ?? Ss     0:07.96 /usr/libexec/kextd
   10   ?? Ss     0:03.20 /usr/sbin/DirectoryService
   11   ?? Ss     0:00.11 /usr/sbin/notifyd
   12   ?? Ss     0:00.11 /usr/sbin/syslogd
   13   ?? Ss     0:02.17 /usr/libexec/configd
   14   ?? Ss     0:00.08 /usr/sbin/distnoted
   15   ?? Ss     0:00.84 /usr/sbin/blued
   16   ?? Ss     0:00.10 /usr/sbin/diskarbitrationd
   19   ?? Ss     0:00.41 /usr/sbin/mDNSResponder -launchd
   22   ?? Ss     0:01.90 /System/Library/CoreServices/coreservicesd
   25   ?? Ss     0:00.20 /usr/sbin/securityd -i
   32   ?? Ss     0:00.07 /usr/sbin/ntpd -c /private/etc/ntp-restrict.conf -n -g -p /var/run/ntpd.pid -f /var/db/ntp.drift
   33   ?? Ss     0:00.12 /usr/sbin/cupsd -l
   34   ?? Ss     0:00.37 /usr/sbin/krb5kdc -n
   35   ?? Ss     0:00.01 /usr/sbin/cron
   38   ?? Ss     0:00.08 /System/Library/PrivateFrameworks/MobileDevice.framework/Versions/A/Resources/u sbmuxd -launchd
   39   ?? Ss     0:00.02 /sbin/SystemStarter
   43   ?? Ss     0:00.06 /System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/RFBRegisterMDNS
   45   ?? Ss     0:00.38 /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.framework /Support/mds
   46   ?? Ss     0:00.61 /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow console
   47   ?? Ss     0:00.01 /usr/sbin/KernelEventAgent
   49   ?? Ss     0:00.64 /usr/libexec/hidd
   50   ?? Ss     0:00.06 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/Support/fseventsd
   52   ?? Ss     0:00.01 /sbin/dynamic_pager -F /private/var/vm/swapfile
   58   ?? Ss     0:00.01 autofsd
   66   ?? Ss     0:02.25 /usr/libexec/ApplicationFirewall/socketfilterfw
   81   ?? Ss     0:00.03 /usr/sbin/ocspd
   88   ?? S      0:00.21 /Applications/Retrospect Client.app/Contents/Resources/retroclient
   89   ?? Ss     0:00.01 /Library/StartupItems/ParallelsTransporter/llipd
   93   ?? Ss     0:04.04 /System/Library/Frameworks/ApplicationServices.framework/Frameworks/CoreGraphic s.framework/Resources/WindowServer -daemon
   94   ?? Ss     0:00.11 /usr/sbin/nmbd -F
114   ?? Ss     0:00.05 /usr/sbin/coreaudiod
136   ?? Ss     0:02.00 /sbin/launchd
140   ?? S      0:02.16 /System/Library/CoreServices/Dock.app/Contents/MacOS/Dock
141   ?? S      0:01.01 /System/Library/CoreServices/SystemUIServer.app/Contents/MacOS/SystemUIServer
142   ?? S      0:03.13 /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder
146   ?? S      0:00.01 /usr/sbin/pboard
147   ?? S      0:00.44 /System/Library/Frameworks/ApplicationServices.framework/Frameworks/ATS.framewo rk/Support/fontd
150   ?? S      0:00.62 /usr/libexec/UserEventAgent -l Aqua
153   ?? S      0:00.07 /System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent
158   ?? S      0:00.13 /System/Library/CoreServices/AirPort Base Station Agent.app/Contents/MacOS/AirPort Base Station Agent -launchd -allowquit
159   ?? S      0:00.03 /System/Library/CoreServices/CCacheServer.app/Contents/MacOS/CCacheServer
160   ?? S      0:00.07 /System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Ma cOS/AppleVNCServer
171   ?? S      0:00.24 /System/Library/Frameworks/SyncServices.framework/Versions/Current/Resources/Sy ncServer.app/Contents/MacOS/SyncServer
178   ?? Ss     0:00.14 /usr/sbin/smbd -F
183   ?? S      0:05.65 /Applications/iTunes.app/Contents/MacOS/iTunes -psn_0_65552
186   ?? S      0:00.07 /Applications/iTunes.app/Contents/MacOS/iTunesHelper.app/Contents/MacOS/iTunesH elper -psn_0_69649
188   ?? Ss     0:01.01 /System/Library/PrivateFrameworks/ApplePushService.framework/applepushserviced
192   ?? S      0:01.09 /Applications/Utilities/Terminal.app/Contents/MacOS/Terminal -psn_0_73746
195 s000 Ss     0:00.07 login -pf web
196 s000 S      0:00.02 -bash
204 s000 R+     0:00.01 ps ax
mbp081:~ web$

Apple TV 2 does not switch automatically the video resolution (60 HZ / 50 HZ)

My apple TV streams the content from a Mac Mini. In my iTunes library are mixed content from the iTunes store. Some are 24 fps with 60 Hz and some are 25 fps with 50 HZ. All was bought on iTunes. The video resolution is set on my Apple TV to AUTO. This mens for me that my Apple TV will change the resolution by itself depending on the movie.
And this is the problem. The Apple TV does not change the resolution. It is only on 60 Hz. A lot of people has the same problem. My iPad wokrs fine and displays all movies correct.

Thank you for the eplanation. What might cause that activity as the TV was off and no other HDMI was on? Only WiFi was available but nothing connecting to the apple TV.... I tried to "wake it up" with iTunes on my macbook - and it works (I was not aware of). But it could not be iTunes and it was not really "used". So it might be iPhone or iPod waking it without we want it to.
I'll check all items potentially connecting to it. Txs!

Mac Pro FireWire does not switch off even when Mac Pro is switched off

Hi,
got my new Mac Pro with 2 x 2.8 GHz Quad-Core Intel Xeon last week!
Found out today, that the firewire connection both on the frontside as well on the backside
keeps beeing powered even if the Mac Pro is switched off!
Is this a new features as my old Mac Pro (2x2.0 GHz Dual-Core Intel Xeon) did not have this feature?
If yes, why is this so? For what is it good for?
Thanks for your comments? If you have the same new Mac Pro maybe you can check out and let me know if this feature is also on your Mac Pro seen.
Thommy

Hi,
called to the apple hotline and got informed that the so called "residual current" is normal at the MAC Pro. Sometimes the USB Ports sometimes the FireWire Ports keep been powered continously even the machine is switched off.
Apple told me further that I can use a connection plug board with a central switch to solve my issue.
I will close now the subject! Thanks veryone for all your help here!
Thommy

Selecting photo then clicking "Fit" does NOT turn off the Ken Burns effect.

Trying to wean from iMovieHD. I'm having trouble mastering what seems to be more limited Ken Burns effect functionality in iMovie11. I don't seem to have the range, say, left-to-right, as I did in either iPhoto or in iMovie HD.
So, I figured for now I'd turn off the Ken Burns effect on all the stills in this project. I've tried selecting one photo, getting into the Fit/Crop/KB effect viewer, then clicking Fit, then Done. But the photo keeps the KB effect that had been applied to it.
I tried changing all photos in Preferences and that didn't change anything either.
Hopefully I'm just missing something? Thanks for any help, everybody...

Nevermind. Got it. As I'd hoped, user error.

Oracle 10g - Database does not respond to the application users

Hi all,
I am using ORACLE 10g database with 75 users connections 50 local and 20 remote users using ADSL and dial up modem. Operating system on server is
Windows 2003.
All of a sudden users making the entry get disconnected getting the error as
ORA-12516: TNS:listener could not find available handler with matching protocol stack
Other case users when using the appliaction get their PC hanged and connection
to oracle fails again. they cannot login to the application that time, the error is
ORA-04031: unable to allocate %s bytes of shared memory ("%s","%s","%s","%s")
Twice a day the users trying to login cannot access the database server.
Front end application is in VB using exe file. When the users cannot logon
to the database. I manually stop the ORACLE services(including DB console) and
then stop the listener.
This practice is going on since last two months.
Server Scenario
After Installing Oracle Standard Edition 10g.
System tablespace utilization is 98.5% which is 465 MB out of total 470 MB.
There is only one Rollback Segment named as SYSTEM.
when we install 9i 4 rollback segments as RO1, RO2, RO3, RO4 are created
by default.
Do I need to add the datafile to SYSTEM table space as its current usage is 99.15% and its auto extend is ticked on using auto extent as 10 MB. I tried adding another datafile during weekend downtime. when I resumed on saturday morning I found it did not add any datafile which I had put on thursday eveninig as system02.dbf.
Do I need to add a new datafile to the SYSTEM tablespace ?
Do I need to create new rollback segments apart from SYSTEM rollback segment ?
My current schema size 15360Mb with its usage as 9.32% (1432.25 Mb).
Please reply !!!

Hi Paul
My Server configuration is
Compaq ML 370
3.4 Ghz Processor
3.5 GB RAM
SQL> show sga
Total System Global Area 171966464 bytes
Fixed Size 787988 bytes
Variable Size 145488364 bytes
Database Buffers 25165824 bytes
Redo Buffers 524288 bytes
SQL> select * from v$sgastat;
POOL NAME BYTES
fixed_sga 787988
buffer_cache 25165824
log_buffer 524288
shared pool subheap 55600
shared pool KQR L SO 218160
shared pool KQR M PO 1329244
shared pool KQR M SO 605364
shared pool KQR S PO 164156
shared pool KQR S SO 6144
shared pool KTI-UNDO 1235304
shared pool sql area 5368208
shared pool KGLS heap 1597560
shared pool joxs heap 6004
shared pool row cache 3707272
shared pool parameters 17520
shared pool repository 19396
shared pool ASH buffers 4194304
shared pool free memory 16586072
shared pool PL/SQL DIANA 679456
shared pool KSPD key heap 4220
shared pool PL/SQL MPCODE 1167992
shared pool library cache 11368964
shared pool miscellaneous 25942980
shared pool pl/sql source 88
shared pool PLS non-lib hp 29816
shared pool XDB Schema Cac 3594144
shared pool alert threshol 3460
shared pool joxlod exec hp 355820
shared pool table definiti 5880
shared pool temporary tabl 4932
shared pool trigger defini 12848
shared pool trigger inform 1892
shared pool type object de 20256
shared pool private strands 1198080
shared pool event statistics per sess 4384640
shared pool fixed allocation callback 304
large pool free memory 8388608
java pool joxs heap 233856
java pool free memory 44743296
java pool joxlod exec hp 5354496
40 rows selected.
SQL> select segment_name, owner, status
2 from dba_rollback_segs;
SEGMENT_NAME OWNER STATUS
SYSTEM SYS ONLINE
_SYSSMU1$                      PUBLIC ONLINE
_SYSSMU2$                      PUBLIC ONLINE
_SYSSMU3$                      PUBLIC ONLINE
_SYSSMU4$                      PUBLIC ONLINE
_SYSSMU5$                      PUBLIC ONLINE
_SYSSMU6$                      PUBLIC ONLINE
_SYSSMU7$                      PUBLIC ONLINE
_SYSSMU8$                      PUBLIC ONLINE
_SYSSMU9$                      PUBLIC ONLINE
_SYSSMU10$                     PUBLIC ONLINE
SEGMENT_NAME OWNER STATUS
_SYSSMU11$                     PUBLIC ONLINE
_SYSSMU12$                     PUBLIC ONLINE
_SYSSMU13$                     PUBLIC ONLINE
_SYSSMU14$                     PUBLIC ONLINE
_SYSSMU15$                     PUBLIC OFFLINE
_SYSSMU16$                     PUBLIC OFFLINE
_SYSSMU17$                     PUBLIC OFFLINE
_SYSSMU18$                     PUBLIC OFFLINE
_SYSSMU19$                     PUBLIC OFFLINE
_SYSSMU20$                     PUBLIC OFFLINE
_SYSSMU21$                     PUBLIC OFFLINE
SEGMENT_NAME OWNER STATUS
_SYSSMU22$                     PUBLIC OFFLINE
_SYSSMU23$                     PUBLIC OFFLINE
_SYSSMU24$                     PUBLIC OFFLINE
_SYSSMU25$                     PUBLIC OFFLINE
_SYSSMU26$                     PUBLIC OFFLINE
27 rows selected.
Currently AUTOEXTEND is ticked as on for SYSTEM tablespace and its size is showing as 99.16% (466.06 mb) used which is very much nearing to its full capacity of 470 mb.
Currently 75 users - 50 Local users and 20 Remote Users are connected to the server. Is there any limit that Server should have limited connections.
Server has Windows 2003 Standard Edition. Has Windows 2003 anything to do
with the no. of users getting connected ?

Voice over mode does not switch off

When I go to turn off voice over mode - I double tap on voice over but it turns off only for a second the. Turns back on again

Hi there Gottliebsen,
You may also want to try triple clicking the home button to disable VoiceOver. Take a look at the article below for more information.
iOS: Configuring accessibility features
-Griff W.

XENPAK-10G-LR does not switch off the laser

Similar Messages

Maybe you are looking for