Xerox 7328 workstation printer not working in Arch x86_64

Hi
I've converted from Ubuntu to Arch. My Xerox 7328 was working in ubuntu jaunty 9.04 perfectly with a special ppd file given to us by Xeorox. In Arch, the printer just spews out blank paper. I have tried downgrading cups to 1.3.9 as per what Jaunty used but the only difference is the printer does not spew out as MUCH blank paper! I don't know where to troubleshoot on this - please could someone provide pointers as to how I can go about solving this?
Thanks
M

https://wiki.archlinux.org/index.php/Fo … ow_to_Post

Similar Messages

Bumblebee is not work on Arch x86_64

when i install bumblebee on arch_i686 ,it works,
but i install it on x86_64 isn't work .
# pacman -S xf86-video-nouveau nouveau-dri mesa
# pacman -S lib32-virtualgl bumblebee bbswitch
# usermod -a -G bumblebee eveblue
# systemctl enable bumblebeed.service
# reboot
eveblue@Arch:~$ lspci |grep VGA
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
01:00.0 VGA compatible controller: NVIDIA Corporation GF119M [GeForce GT 520M] (rev a1)
how to solved it ?
Last edited by eve_ouyang (2013-06-25 04:06:14)

nourathar wrote:
Hi,
if you only followed the steps you quoted above, I'm more suprised by your suggestion that your nvidia is off on boot when you are on arch_i368.
'Default behaviour of bbswitch is to leave card power state unchanged', as is explained here:
https://wiki.archlinux.org/index.php/Bu … g_bbswitch
Did you configure bbswitch according to the steps outlined there ?
ciao,
J.
(sorry, misread the docs i realize now, and can't delete this post..:()
I use bumblebee and bbswitch and I did configure it in a bbswitch.conf as outlined in the link above, even when now I see it says that is not necessary when using bumblebee. Did you try that ?
thx,nourathar
but the bumblebee install will turn the Nvidia off,and I had read the wiki before and try myself to configure the bumblebee ,but it doesn't work.
I think ,are there some lib32* not install.
And sorry for my poor english.
Last edited by eve_ouyang (2013-06-19 09:43:22)

[HELP] SpaceChem from Steam is not working on Arch x86_64

Hi,
I'm trying to get SpaceChem to work by disabling STEAM_RUNTIME, disable in-game overlay, install dependencies but none seem worked.
Here is steam output when I tried to run SpaceChem
ERROR: ld.so: object '/home/linux/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
ERROR: ld.so: object '/home/linux/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
Stacktrace:
at (wrapper managed-to-native) Tao.Sdl.Sdl.SDL_SetVideoMode (int,int,int,int) <0xffffffff>
at #=qQdKRcUfE46$efAqMsrzhkw==.#=qIIRTW0KinnT0wX4ub7J9Uw== (Impeller.Vector2i,bool,bool,bool) <0x002ef>
at #=qQdKRcUfE46$efAqMsrzhkw==.#=qgLEANBhVfIuIevx4ZYI9dQ== () <0x004ab>
at #=qQdKRcUfE46$efAqMsrzhkw==.#=qtAieMJa3O4$ICce59T5vcg== () <0x000f7>
at #=qT5m9zMMOGgeXuvB5RBp1CjKxG2TMp9VAFSsa0vglCLY=.#=qXYEX0UCMEzgZT5Za8zdXCw== (#=qQdKRcUfE46$efAqMsrzhkw==) <0x00093>
at #=q_kNnXHjBp6OH1879peO3_DruPfChZ2vzI_L2drgdLTw=.#=qC1N1QIcG3BaOsMiqVVYv5w== (string[]) <0x001d3>
at (wrapper runtime-invoke) <Module>.runtime_invoke_int_object (object,intptr,intptr,intptr) <0xffffffff>
at (wrapper managed-to-native) System.AppDomain.ExecuteAssembly (System.AppDomain,System.Reflection.Assembly,string[]) <0xffffffff>
at System.AppDomain.ExecuteAssemblyInternal (System.Reflection.Assembly,string[]) <0x0002b>
at System.AppDomain.ExecuteAssembly (string,System.Security.Policy.Evidence,string[]) <0x00027>
at (wrapper remoting-invoke-with-check) System.AppDomain.ExecuteAssembly (string,System.Security.Policy.Evidence,string[]) <0xffffffff>
at (wrapper xdomain-dispatch) System.AppDomain.ExecuteAssembly (object,byte[]&,byte[]&,string,string[]) <0xffffffff>
at (wrapper xdomain-invoke) System.AppDomain.ExecuteAssembly (string,System.Security.Policy.Evidence,string[]) <0xffffffff>
at (wrapper remoting-invoke-with-check) System.AppDomain.ExecuteAssembly (string,System.Security.Policy.Evidence,string[]) <0xffffffff>
at #=q_kNnXHjBp6OH1879peO3_DruPfChZ2vzI_L2drgdLTw=.#=qC1N1QIcG3BaOsMiqVVYv5w== (string[]) <0x000cb>
at (wrapper runtime-invoke) <Module>.runtime_invoke_int_object (object,intptr,intptr,intptr) <0xffffffff>
Native stacktrace:
./mono() [0x80e16fc]
./mono() [0x81209fc]
./mono() [0x806094d]
linux-gate.so.1(__kernel_rt_sigreturn+0) [0xf77a0bd0]
/usr/lib32/libc.so.6(+0x80e86) [0xf75b3e86]
/usr/lib32/libudev.so.0(udev_device_new_from_syspath+0x53) [0xf252b083]
/usr/lib32/libudev.so.1(udev_device_new_from_devnum+0xac) [0xf251548c]
/usr/lib32/libGL.so.1(+0x49807) [0xf74d2807]
/usr/lib32/libGL.so.1(+0x49d3c) [0xf74d2d3c]
/usr/lib32/libGL.so.1(+0x43f4b) [0xf74ccf4b]
/usr/lib32/libGL.so.1(+0x19bd2) [0xf74a2bd2]
/usr/lib32/libGL.so.1(+0x1606b) [0xf749f06b]
/usr/lib32/libGL.so.1(glXChooseVisual+0x64) [0xf749f1e4]
/home/linux/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so(glXChooseVisual+0x37) [0xf778a6b7]
/usr/lib32/libSDL-1.2.so.0(+0x3ba40) [0xf16dda40]
/usr/lib32/libSDL-1.2.so.0(+0x40c54) [0xf16e2c54]
/usr/lib32/libSDL-1.2.so.0(+0x4107d) [0xf16e307d]
/usr/lib32/libSDL-1.2.so.0(SDL_SetVideoMode+0x25f) [0xf16d054f]
[0xf3ad5884]
[0xf1924d80]
[0xf1912e24]
[0xf1911540]
[0xf19104bc]
[0xf3ac7324]
[0xf3ac7486]
./mono() [0x8064c2c]
Debug info from gdb:
=================================================================
Got a SIGSEGV while executing native code. This usually indicates
a fatal error in the mono runtime or one of the native libraries
used by your application.
=================================================================
Assert( Assertion Failed: m_nNumRegisteredWriters == 0 ):/home/buildbot/buildslave_steam/steam_rel_client_ubuntu12_linux/build/src/tier1/../tier1/fileio.cpp:4002
It's also worth mentioning that I'm using [testing]
Thanks

https://wiki.archlinux.org/index.php/Fo … ow_to_Post

Xerox_mfp scanner not working in arch (compilation bug?)

I have discovered that my xerox_mfp printer/scanner Xerox Workcentre 3119 is not working in archlinux. However, with the same libsane version, scanner is working in debian.
I checked the two libraries libsane-xerox_mfp.so.1.0.22: they are different in size.
I have copied the debian library in /usr/lib/sane and now the scanner is working.
Compilation bug?
Last edited by hifi25nl (2011-05-24 17:35:01)

architecture: x86-64
samsung scx-4200: xerox_mfp sane backend
the same problem
libsane-xerox_mfp.so.1.0.22 from debian libsane_1.0.22-6_amd64 package is working

HP Laserjet 1320 attention light on, printer not working.

I checked for paper jam, reseated printer cartridge, removed and reinserted printer and line cord plugs. Turned printer on and off. Attention light remains on and printer not working.

Hi Robert8695,
Let's manage one issue at a time. Regarding the error "unable to establish a two-way connection with the device", check out the link below for troubleshooting you can do to resolve it:
http://goo.gl/u3Snr
Let me know what happens and if the other problems persist as well.
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Printer not working following iPad uodate

Printer not working following iPad upgrade

Hi,
Is the printer not mechanically working or are you having a problem with printing wirelessly from your device? Was the upgrade to the ipad software or did you get a new ipad?
Try restarting your apple device - It's a simple fix that sometimes helps re-establish the connection to the printer.
Other things to check would be that there have been no recent changes to the wifi password.
"Although I work for HP, I'm speaking for myself and not on behalf of HP"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

File- Print not working from SQL Developer 1.2.1 Build MAIN-32.13

File->Print not working from SQL Developer 1.2.1 Build MAIN-32.13.
I downloaded sqldeveloper-1.2.1.3213.ZIP and extract to a local directory. From the extracted directory I ran ..\sqldeveloper\sqldeveloper.exe from Windows XP sp2. The program itself seems to run just fine but File-Print doesn't do anything. In Help-About, Java Platform is reported as 1.5.0_06 and Oracle IDE is 1.2.1.3213. I'm not sure where to look for what is causing the problem.
Thanks

I hadn't tried CTRL-P before but I did today. On the first attempt, I saw a small jump in the memory usage for sqldeveloper.exe as reported in Windows Task Manager. Otherwise, there was no change. A second CTRL-P in the same session produced a further bump but subsequent attempts in the same session produced no further change in CPU or Memory Usage.
Using Task Manager to monitor this further, I tried File->Print again and saw that sqldeveloper would periodically climb to 1 or 2 percent CPU and consume a little more memory. After a minute or so, though, all activity stops again.
I do not get a print dialog box from SQLDeveloper using either CTRL-P or File->Print

Windows 8.1 pro 64 bit - finger print not working (sony viao 15126pab)

http://answers.microsoft.com/en-us/windows/forum/windows8_1-hardware/windows-81-pro-64-bit-finger-print-not-working/664d9ca8-a0ea-479f-851d-3631e3c1404c hi i am using sony svs 15126pab  2 days before firefox hanged so i forcefully shutdown the system , after rebooting fingerprint not workingthen i go to device manager i found biometrics working properly , 2, 3 times restarted then also finger print not working, then i checked the authentic true suite " its giving error message box and closing every times then i uninstall authentic true suite and installed again ,it asked registration and i registered but i didn't see the finger enrolling options in the software . i enabled biometrics options in administrative templates (components) , other options also enabled in services restarted , reinstalled from Sony Store - nothing helps..................... please help me ,,, i cant enable the add option of fingerprint in sign in options in settings.. the add option is like deactivated , no biometrics tool in control panel, no fingerprint enrolling option in authentic true suite . i purchased the system with windows 8 pro then upgraded to 8.1 now its reserved to windows 10 . so pls give me some solutions to rectify this problem

I cant access any printers, not even the virtual printers.
What I would do is use ProcMon to find out why that Event entry was written. Then I imagine I would get a clue about a .dll which might be involved, which hopefully might be registerable. Since IE9 there have been new .dll involving printing
which have not been reflected in any of our repair tools. However, instead of modifying our old scripts to reflect this fact, I have been advocating, so far unsuccessfully, that Microsoft create a proper IE Repair tool, one which does not rely on such
unreliable techniques.   E.g. a better method of repairing would be to have it done by a proper troubleshooter (an .msdt file) but so far it seems nothing has been done in that way for these symptoms (again, assuming the cause is registry corruption
and not simple interference from now incompatible third-party programming--the fix for that would be to identify and remove the incompatibilities.)   For example.
Robert Aldwinckle

Quick Print not working after upgrading to Reader XI on Citrix

Hi,
I've upgraded from Reader 9.2 to 11.0 on our Citrix farm.
After the upgrade the Quick Print function in Outlook 2010 is not working anymore for PDF files. (other files are working fine)
Also, the RightClick --> Print on PDF files in Windows Explorer gives an open-with prompt. (other files are working fine)
Even if I choose Adobe Reader and chech the box "Always use the selected program to open this kind of file", the open-with prompt re-appears the next time I rightclick and choose print.
If I DoubleClick PDF files in Windows Explorer or in Outlook e-mail attachments, Reader opens as it should.
I've also tried to install the latest 11.4 update, without any luck.
The same installation sources were used on several local workstation, where everything is working fine after the upgrade.

It's definitely a Lion's issue as I rolled back to Snow Leopard after struggling with the card reader and surprise....all my cards can be seen again and my MacBook early 2010 works perfectly. Just as it was working before I purchased Lion. What to do? Well I guess there is only one way to fix the problem. We should demand from Apple to debug Lion from this and many other errors in the code. Overall I am not very impressed with my first Lion encounter and will stay on Snow Leopard untill people would be able at least to use the MacBook hardware properly under any Lion built. I have also had so many other issues with Lion that it may take a few hours to list and it's not a purpose of my visit of this thread. Cheers to all and stay cool.

[SOLVED] Printer not working after reboots

I recently built my won desktop running Arch. Every thing works fine except for printer. Printer is Brother MFC-290c. It is a Multinational printer (i.e Scanner and printer together).
Once I configure the printer it works fine until the next reboot. After reboot printer user/group changes to root:scanner.
# ls -l /dev/bus/usb/005/002
crw-rw-r-- 1 root scanner 189, 513 Jun 9 07:17 /dev/bus/usb/005/002
So after every reboot I need to do "lsusb" to look for Bus and Device ID for the printer and change its owner/group to root:lp. After this step is performed Printer works fine until next reboot.
$ lsusb
Bus 005 Device 002: ID 04f9:01fd Brother Industries, Ltd
Bus 005 Device 004: ID 045e:00f9 Microsoft Corp. Wireless Desktop Receiver 3.1
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 011 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
How can I make sure that whenever I plugin this printer its user and group is root:lp instead of root:scanner
Last edited by nik (2013-06-10 00:48:50)

SOLVED :D:D:D
Thanks Strike0. That was a push in right direction. After reading your reply, I decided to take a look at my udev rules. There was not one for my printer but there was one for the Scanner. I do not yet know how to read udev file, but sure enough it looked as if it was causing all problems . Renamed the rules file for the scanner to see if everything works fine in its absence. Rebooted, Printer and scanner are both working fine now.

Adobe PDF Printer not working as print driver; 9.5.5 (pro) with Windows 7, 64 bit

I have installed, repaired, uninstalled and re-installed Acrobat Pro 9.5.5 on a newly formatted SSD with Windows 7, 64 bit on my desktop machine. The program was installed from Acrobat Pro 9.0.0 and updated within the program. I have the program also installed on my laptop, and the Adobe PDF Printer driver is working properly on my laptop.
On my desktop with the newly formatted SSD, the Adobe PDF printer driver is not working. Note that I am using the printer driver, and not any pdf creation techniques within MS Office or other programs.
When I go to the Adobe PDF printing preferences on my desktop, I only get a generic, two tab window open. When I print a file to this printer on my desktop machine, I do not get a window opening that asks where to create the pdf or what to name it, and I never see any files created. In MS Word, the Create PDF option under the Acrobat tab works and opens a dialog to ask the name and location to save, and then opens a PDF Maker progress window and properly creates the file. I can also save a file as an .eps or .ps file and use Distiller to create the pdf. However I cannot get the Adobe PDF printer driver in my Devices and Printers to work properly, although it works just fine on my laptop with the same program (Pro 9.5.5) and same Windows version (7, 64 bit).
Repairing, uninstalling and re-installing does not solve the problem. Acrotray.exe *32 process is running. Any ideas on why this won't run properly on my desktop, but will run on a similarly configured laptop?
On my laptop, I get a full, (7) tabl menu with all the normal options:

I found this answer from Deepak Chauhan on another forum, and it solved this problem!
Try this to add Adobe PDF printer manually on Windows 7, and Windows Vista.
If windows 7 is Enterprise or better edition: (Admin rights required)
Start>search for printmanagement.msc and open the print management module
Expand the print server and expand the computer name to see availbale printers, drivers and printer ports.
- from printers ensure there's no Adobe PDF printer, if there is delete it
- go to ports and delete the PDF ports (the ones ending in *.pdf)
- go to drivers and delete the PDF converter.
Take note if any errors occur, but continue with the following steps regardless.
If on windows 7 home edition, just goto start>Devices and Printers and ensure PDF pritner is not listed.
Then open the registry (if any erors deleting these keys happen, see below)
1: go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Print\Printers
delete any adobe PDF printer subkey present
2: go to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors
delee the PDF port monitor if present
3: go to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Printers
again delete and pdf printer subkey
If any erros occur, you need to set the owner of the key to the currently logged in admin user, then ensure that user has full control.
Do this by right-click the key and selecting permissions, clicking on advanced, then the owner tab.
Once you've all that has been done, open a command line as administrator.
Copy and pate the following commands in order
1: net stop spooler
2: rundll32.exe setupapi.dll,InstallHinfSection AdobePDFPortMonitor 128 C:\Program Files (x86)\Adobe\Acrobat 9.0\Acrobat\Xtras\AdobePDF\AdobePDF.inf
3: net start spooler
4:rundll32.exe printui.dll,PrintUIEntry /if /b "Adobe PDF" /f "C:\Program Files (x86)\Adobe\Acrobat 9.0\Acrobat\Xtras\AdobePDF\AdobePDF.inf" /r "Documents\*.pdf" /m "Adobe PDF Converter"
That should set back the pdf printer.
This seemed to provide the link that provided the Adobe PDF Settings tab to the Adobe PDF Printing Preferences that was missing!

Bursting control file for Printer not working in WINDOWS ENVIRONMENT

Hi,
We are trying to print xml publisher report output (PDF) using bursting control file. Is not wokring.
We are using ebs (R12.1.1) on Windows environment.
Any pre-requisite setup (ie. cups config) should be done before printing using control file. Please guide me i am not having knowledge in printer setup and printer part..
Thanks in advance
--Ben

Hi Hussein,
Yes, I am able to print seed concurrent report (o/p -text) to that printer (method:- giving the printer name and copies by clicking " Option " in SRS window.. )
When i do the same for xml publisher publisher report to the same printer , its not working using bursting control file.
I too made the test in xml publisher report without bursting control file , there i faced another new issue. Let me explain
1. We are using RDF as data source . here o/p :-" XML "
2. We are using RTF as layout. In template definition, i chose the default o/p type as :- "HTML"
3. When i submit the request, i choose the printer which is working fine for printing seeded report. (method:- giving the printer name and copies by clicking " Option " in SRS window.. )
4. My printer getting prints HTML tag, instead of desired o/p. I wondered after seeing the printout.
5. I cross checked by clicking view output, its showing me the exact html output as per RTF layout.
Dont know wat happening ??? Help me out.
i did the same for changing default output type in template definition to RTF,PDF.. its printing source code of the output type instead of printing output.
Thanks & Regards,
--Ben

Why does my Kodak printer not work with yosemite?

ever since upgrading to yosemite, my kodak printer will not work. i got as far as being able to download a software update but still no joy.

My kodak 5250 would not print and I tryed the termial with no luck and then i received an email from nowater and turn on Bonjuor in safair and now I am printing i did not enter the ip address of my printer
heres the email
I decided to poke around in the Epson settings via the web interface. To do this, just enter the printer's IP address in a browser that's on the same network (you may have to skip some HTTPS / certificate warnings). From there I looked around until I found Wi-Fi/Network Settings / Services / Protocol. On my system, Use Bonjour was unchecked. I had seen in other people screenshots and videos that when the Add Printer tool works, it shows that it connects via Bonjour Multifunction, so I enabled Bonjour and saved the settings. After waiting a few minutes for the settings to be applied, I was able to add the printer via the Add Printer Default tab (I did change the "Use" setting from "Secure AirPrint" to "Epson WF-3620 Series" option -- I think this is the Epson specific driver).
I don't know if Bonjour is disabled by default or if I turned it off somehow in the past and forgot, but it's an easy enough fix that might work for someone else so I thought I should share.
OTHER posible solotion
Go to Spotlight, then enter Terminal and press Enter.
The terminal window/program opens.
Enter sudo sh -c 'echo "Sandboxing Relaxed" >> /etc/cups/cups-files.conf' in the terminal.
Enter your system OS login password when prompted.
Note: The password you enter will not appear, which is normal. Be sure to enter the correct password.
Enter sudo launchctl stop org.cups.cupsdYour screen will look similar to the following:
no updated drivers at this piont

HP laserjet printer not working

HP laserjet printer not working

Greetings,
Can you please tell me what model Laserjet you are working with?
Also, how are you trying to connect with this laserjet, USB or Wifi?

HP B500 Wireless Bluethooth Adapter for HP Printer Not Working With Windows 8.1

I have been using the HP BT500 bluetooth Wireless adapter to print wirelessly to my HP Officejet Pro 8500 printer. I have been using Windows Vista, but recently upgraded to Windows 8.1. I learned after the upgrade that the HP B500 wireless bluetooth adapter is not compatable with Windows 8.1. I have attempted to find a driver upgrade for the B500, but there does not appear to be one available. I have also searched the HP site and other sites in an attempt to locate an alter wireless blotth adapter to replace the B500, but have again been unable to locate one.
Is there a wireless bluetooth apter that will allow me to print wirelessly to my HP Office Pro 8500 from my laptop?

Hi @Raider83,
Welcome to the HP Forums!
I noticed that your HP B500 wireless bluetooth adapter for your HP Officejet 8500 is not working with Windows 8.1. I am sorry to hear this but happy to look into this for you!
I am not sure if you are using a 32-bit or 64-bit Operating System. But sometimes with Windows 8.1 you can use compatibility mode to install an older version of the driver. Which might help the situation. Here is a link to some other Windows drivers, HP bt500 Bluetooth USB 2.0 Wireless Adapter Drivers.
Once you got a driver downloaded, follow this guide, Make older programs compatible with this version of Windows, on how to install it using compatibility mode. It is not guaranteed to work, but it is worth a try!
If you still need me to look for other bluetooth adapters, please respond with your printer's Product/Model Number. To find your printer's Product/Model Number follow instructions in this link. Finding Your HP Product Model Number. As there are multiple HP Officejet 8500 printers.
Thank you for posting, and have a nice day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Xerox 7328 workstation printer not working in Arch x86_64

Similar Messages

Maybe you are looking for