Xerox Phaser 6110 Not working after lion

I've updated to Lion but i now cannot print on my networked Xerox Phaser 6100 printer. I know that previously i had to have rosetta installed as per the instuctions on Xerox website and everything worked fine. It's just since the update that it has stopped working. The print jonb goes into the queue as normal and just sits there without being printed. If i click on resume i get a message saying "/Library/Printers/Xerox/Phaser6110/rastertoxrx failed".
Any ideas please?

I have the xerox phaser 8560:
I also installed Lion at work here;
everything was working fine with the 1.2 driver under snow leopard.
After the lion install, pressing the print button didnt do anything (paused).
I then downloaded and installed the new xerox lion driver (2.09) which at the end of the installation process asks me to locate my printer which i did using its IP address.
Now, trying to print, it doesnt pause anymore, the print job does proceed to the queue, but i get the error 'printer out of ink', which is definately not the case as it printed fine under snow leopard.
Anyone know a solution/workaround for this?
Thanks in advance!!!

Similar Messages

Security and privacy system preferences not working after Lion install. What to do?

Security and privacy system preference not working after Lion install. Not sure if it happen with Lion installer or after updating. What to do?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” (without the quotes) and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

T mobile broadband stick not working after lion instal

T mobile broadband USB stick not working after lion install

No s#!t batman.The point is a mac laptop is ment to be mobile and for it to be mobile you need a mobile broadband stick so when a new op system lion is released don't you think it would be one of the first items to be checked for compatability.with snow leopard the same problem took months before I could use a broadband stick,there is no lion connection manager software available right now until someone decides to wright it, so does anyone have a usefull fix i can use ?

Time Machine not working after Lion install

After Lion install at first Time Machine would not back up-then it did, but backed up the entire HD-now Time Machine will no longer function in trying to retrieve any data from Mail or anything else

After consulting with maker of back up drive (LaCie) I opted to format the drive. Lost some stuff but nothing critical. I then backed up and now all appears to be working, i.e drive is backing up and Time Machine is now functioning.

Microsoft Word 2008 does not work after lion installation

After I installed Lion in my MacBook Pro, Microsoft word 2008 failed to work properly. Each time I try to quit word an error message appears and word closes and reloads automatically. The only way I can now really quite word is by the 'Force quit' option (in the apple menu). Word was working properly with Snow Leopard, so no idea what happened there... Any hint? Thanks

Ok, did exactly what you said... To 'make word crash' I only had to open it and then try to 'quit' it, in crashes 100% of the time...
1/3/12 11:43:29.066 AM com.apple.launchd.peruser.501: ([0x0-0x99099].com.microsoft.Word[970]) Exited: Killed: 9
1/3/12 11:43:31.983 AM Microsoft Error Reporting: CFURLCreateWithString was passed this invalid URL string: '/StageOne/Generic/MacCrash/com_microsoft_word/12_3_2_111121/microsoftcomponent plugin/12_3_2_111121/0x000ed279.htm?lcid=1033&os=10.7.2&testDrive=NO' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
1/3/12 11:43:31.984 AM Microsoft Error Reporting: CFURLCreateWithBytes was passed these invalid URLBytes: '/StageOne/Generic/MacCrash/com_microsoft_word/12_3_2_111121/microsoftcomponent plugin/12_3_2_111121/0x000ed279.htm?lcid=1033&os=10.7.2&testDrive=NO' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
1/3/12 11:43:31.984 AM [0x0-0x99099].com.microsoft.Word: 2012-01-03 11:43:31.983 Microsoft Error Reporting[977:7703] CFURLCreateWithString was passed this invalid URL string: '/StageOne/Generic/MacCrash/com_microsoft_word/12_3_2_111121/microsoftcomponent plugin/12_3_2_111121/0x000ed279.htm?lcid=1033&os=10.7.2&testDrive=NO' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
1/3/12 11:43:31.984 AM [0x0-0x99099].com.microsoft.Word: 2012-01-03 11:43:31.983 Microsoft Error Reporting[977:7703] CFURLCreateWithBytes was passed these invalid URLBytes: '/StageOne/Generic/MacCrash/com_microsoft_word/12_3_2_111121/microsoftcomponent plugin/12_3_2_111121/0x000ed279.htm?lcid=1033&os=10.7.2&testDrive=NO' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
I hope you can make some sense of all that!
Thanks!

Facetime in imac pro not working after Lion...

After Lion, Facetime in my Mac Book Pro has not been working. It constantly states: The server encountered an error processing registration. Please try again later. And haven't been able to make it work. My id is ok, password is correct... HELP!

Try this:
https://discussions.apple.com/thread/3801516?tstart=0

Scrolling/other gestures not working after Lion upgrade - Any suggestions?

So far the only gesture that seems to work on my iMac with Magic Mouse is the two fingered swipe to the left and right to switch between full screen apps / mission control / etc.
Scolling, double click to open mission control, etc do not work despite options selected in the Mouse preferences pane.
Have trie swapping mouse over but no joy and my Macbook, which is also upgraded works with no problems.
Any suggestions to try and get things working would be gratefully received.
Michael

I'm using a Logitech Performance MX mouse and after installing Lion, the calibration or whatever is messed up. For example, whereas before I would scroll the wheel on top of the mouse to move down the page or document, doing so now moves me UP the page (and vice versa, scrolling the wheel away from me toward the screen moves me DOWN the page). I don't see a fix for that in System Preferences. I can probably adapt, but should I really have to?
Yes, I know, Apple wants me to use the trackpad now rather than a mouse. Well, sorry. I am set in my ways.
When I open the Finder to find a photo, my windows are also inverted. Items that were at the top of the list are now at the bottom and I don't see any way of inverting back as you could before. What the...?

IPad wi-fi not working after Lion and cloud updating

Updated to LION OS 10.7.2 and updated iTunes today along with updating to the "cloud."
Updated iPad to 5.0.1.
Wi-fi is not working now.
On my desktop iMac I went into system preferences and went to "sharing" and have "internet sharing" checked. This is how it was working before.
I am trying to finish my iPad update. When I get to "wi-fi networks" it shows my iMac G5 but just keeps searching after I try to select it. It will not connect to my wi-fi. How do I get it to work????

I am using an intel i3. When I said above about my G5...that was just what my computer was named. I have a new iMac but when information was transferred it must have kept the name of it as my G5.

Final cut pro x not working after Lion install.

So i installd Lion yesterday but now Final cut pro X is not working... it starts up but is never usable...it jammz right away...
I use a Macbook Pro 15 inch. 2.53/8gb

Also have this issue - the only "fix" at present seems to be renaming the /Library/Application Support/iLifeMediaBrowser to something like _iLifeMediaBrowser and then launching FCPX - it runs straight away.
This also fixes a similar issue with iMovie 11 under 10.7
Really nasty bug that needs looking into from Apple, I'll file a bug report.

Wireless trackpad not working after lion update on May 15, 2012

Right after OSX update on May 15, 2012, the pairing of my wireless trackpad to the desktop is no longer working.
First the bluetooth found my trackpad. After clicking "continue", the box showed: "No trackpad found The pariing attempt was unsuccessful, click "continue" to try again.
I've been trying for several times. Still not working!!

Yes, I did replaced a new set of batteries!! The computer keeps finding new wireless trackpad but once I click on continue, the box showed "the pairing was unsuccessful". Again, this happend when I updated my OSX this morning.
I clicked on the bluetooth set up box. It shows a green light (connected) but sometimes turned red (disconnected) for no reason. Then I clicked on "Monitor connection RSSI. As I played with the trackpad, there seemed to be signals being detected by the desktop.
Still, the mouse cursor cannot be moved by the wireless trackpad and the pairing is still unsuccessful.
JyhMin

Mac Pro 3,1 GeForce 8800 GT not working after Lion update

Hi everyone. I'm from Spain, so please excuse my English.
My Mac is booting, but video card is not recognized.
Could get in using Screen Share and no video card appears in system profile.
Tried to restore Snow Leopard and Leopard in target disk mode, but video card is still not working (fan is on all the time).
Don´t know what else to try...

I think I'm trying this: http://www.youtube.com/watch?v=T7um_hZYom4

Printer not working after Lion update

Since I updated to Lion, my printer doesn't work anymore. I get this message: (screenshot)
I updated to the latest drivers and software that should work with Lion according to the canon site. I have a canon mp270.
How can I fix this?

http://support.apple.com/kb/HT3669
says: * Vendor software recently updated via Software Update.
If you don't see it in there, you can download the latest Canon drivers from:
http://support.apple.com/kb/DL899
If that doesn't work, select Mac OS X 10.7 from: Canon MP270 drivers and software page. There are three downloads quoted below:
File Name: misd-mac-1_9_0m.dmg 07/24/11 6.66MB
This driver is a scanner driver for Canon color image scanners.
MP270 series CUPS Printer Driver Ver. 10.51.2...
File Name: mcpd-mac-mp270-10_51_2-ea11.dmg 08/19/11 8.58MB
This product is a printer driver for Canon IJ printers.
MP270 series Scanner Driver Ver. 15.5.2 (Mac ...
File Name: msd_-mac-mp270-15_5_2-ea8_2.dmg
which I can't link to directly.

IChat/Jabber not working after Lion Server upgrade

I just upgraded our server to Lion today, and along with a slew of other issues, we can't get iChat working! It worked initially, for about the first ten minutes after the upgrade, but now all I get is the following error message in the server log:
Oct 28 20:47:18 reactor jabberd/c2s[4990]: failed loading authreg module 'sqlite' (dlopen(/var/jabberd/modules/jabberd2/authreg_sqlite.so, 1): image not found)
Oct 28 20:47:18 reactor jabberd/sm[4987]: failed loading module 'disco-publish' to chain 'pkt-user' (dlopen(/var/jabberd/modules/jabberd2/mod_disco-publish.so, 1): image not found)
Oct 28 20:47:18 reactor jabberd/sm[4987]: failed loading module 'disco-publish' to chain 'user-load' (dlopen(/var/jabberd/modules/jabberd2/mod_disco-publish.so, 1): image not found)
Oct 28 20:47:18 reactor jabberd/sm[4987]: failed loading module 'disco-publish' to chain 'user-delete' (dlopen(/var/jabberd/modules/jabberd2/mod_disco-publish.so, 1): image not found)
Oct 28 20:47:18 reactor jabberd/sm[4988]: failed loading module 'disco-publish' to chain 'pkt-user' (dlopen(/var/jabberd/modules/jabberd2/mod_disco-publish.so, 1): image not found)
Oct 28 20:47:18 reactor jabberd/sm[4988]: failed loading module 'disco-publish' to chain 'user-load' (dlopen(/var/jabberd/modules/jabberd2/mod_disco-publish.so, 1): image not found)
Oct 28 20:47:18 reactor jabberd/sm[4988]: failed loading module 'disco-publish' to chain 'user-delete' (dlopen(/var/jabberd/modules/jabberd2/mod_disco-publish.so, 1): image not found)
So obviously it's missing the disco-publish module, but I'm not sure what to do about it, or the authreg module. I checked the var/jabberd/modules/jabberd2 directory, and the .so file is indeed missing. Any help is appreciated!

bump

Built in iSight not working after Lion install

First I thought it was iglasses which I removed. I then unplugged my secondary Logitech cam; but still I can't get any image from the Built in iSight Camera after my Lion install.
It shows up as a USB peripheral in the mac System Profiler. What gives?
Thanks

Hi, i read this very useful post to undestand why my iSight camera won't work under Quicktime video recorder, on Mac OS X Lion 10.7.2. I was sure it worked in the past, and for example Photo Boot works, Skype works but not Quicktime. I tried the reset pause, and anything happens. Solution for me was the idea of disconnect some USB peripherical. It was my external audio card for me, a Focusrite Scarlett 8i6 audiocard. It starts to work immediately. If i reconnect the audio card after the working window in Quicktime, it seem to continue to work in a perfect way, but if i close and reopen Quicktime iSight still blocked. Very strange, anyway i just can make it start when i need. I hope this will be useful to others.

Express Card on MBP Not working after Lion Upgrade

Since upgrading to Lion, the Express Card on my MBP (2009 model) is no longer working. Any card inserted does not show up on the finder. The Express card icon does show up on the menu bar and gives me the option to power off the card, but there's no way I founf to read the card anymore.
Disk Utility also does not see the card.
Any help available would be very appreciated.

heeynorton wrote:
@EZ Jim. Unfortunatley that did not help. I was very excited to try it as nothing else has worked, but to no prevail. I suppose I'll have to take it into the Apple Store.
The Apple Service Techs will surely be able to get it working for you. Regardless of how you proceed from here, be sure to make a current backup of all your important files first unless you already have done so.
If you have the time, and if you want to try one more thing before taking your Mac in for service, a complete Lion reinstall may fix your problem. If you did not do so before your initial Lion install, it may help to uninstall any PPC or Classic Apps. These kinds of apps cannot run in Lion, and could be a source of software conflicts. The easiest way I know to find PPC and Classic apps is to sort (by "kind") the list of Software > Applications listed in your Mac's System Information Utility.
Once you have uninstalled all PPC and Classic apps, reinstall Lion. If you need help, the instructions here explain how to reinstall Mac OS X while keeping your files and user settings intact: http://docs.info.apple.com/article.html?path=Mac/10.7/en/mchlp1599.html
If the problem persists even after this reinstall, (unless you have a hardware problem,) a complete erase and reinstall of OS X should get your system working. The help article for this process is here: http://docs.info.apple.com/article.html?path=Mac/10.7/en/mchlp1599.html Erase and reinstall will take much more time, largely because you will need to reinstall all apps and then reload your data files from your backups. To avoid the possibility or also restoring possible conflicts or problems, do NOT use migration assistant after erase and reinstall. Rather, reinstall each app from its own installer and manually copy data you need.

Xerox Phaser 6110 Not working after lion

Similar Messages

Maybe you are looking for