Xerox printer pause after Lion install

After installing Lion (10.7), I cannot print to my Xerox Phaser 6110MFP. The printer job goes to pause.
Any help would be appreciated.

Thanks Ham...that fixed it for me! I remember before Lion I was printing LPR ...don't know why the Lion install changed things but it did (even tho' I had set up via Bonjour the first time around, everything worked just fine prior to Lion.)
What I did now was to delete my print queue and re-add the Xerox Phaser 6280...I had to choose to add "OTHER printer" first after choosing to add another printer (by clicking on the plus sign) then proceeded as follows:
1. Select IP Printing from the first pull-down menu.
2. Select LPD/LPR from the second pull-down menu.
3. Enter the printer’s IP address in the Printer Address field.
4. Verify that the Queue Name field is blank.
5. Select the correct Xerox printer driver/corresponding PPD file from the pull-down menu.
6. Click the Add button. The printer is added to the list.
I also put my IP address into the "Location" field - don't know if I was supposed to or not but everything works 100% now:)

Similar Messages

Security and privacy system preferences not working after Lion install. What to do?

Security and privacy system preference not working after Lion install. Not sure if it happen with Lion installer or after updating. What to do?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” (without the quotes) and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

My MacBook Pro is running very hot after lion install. Are there any hardware changes that will help? What can I do to get it back to normal?

My MacBook Pro is running very hot after lion install. Are there any hardware changes that will help? What can I do to get it back to normal?

I get the impression that most of the users on older hardware experiences similar temperature issues on Lion for a long time now. Awaiting for confirmation from the original poster.
In the meantime I'm just cautious with regards to pushing the machine to such extreme temps, since something tells me such behaviour which includes monitor flickering and the likes is nothing but abnormal for any type of use...
Any clues if 10.7.5 does anything on this? If not I'm afraid i see myself going back to SL for good...

Tie Machine no longer backs up after lion install

After Lion install, Time Machine no longer backs up-will start to back up but freezes after a few kb's-spinning clock will spin 24/7 but backup is stalled

See the green box in #D2 in Time Machine - Troubleshooting.

Time Machine not working after Lion install

After Lion install at first Time Machine would not back up-then it did, but backed up the entire HD-now Time Machine will no longer function in trying to retrieve any data from Mail or anything else

After consulting with maker of back up drive (LaCie) I opted to format the drive. Lost some stuff but nothing critical. I then backed up and now all appears to be working, i.e drive is backing up and Time Machine is now functioning.

No sound in garageband after Lion install.

No sound in garageband after Lion install, can anybody help please?

12 hours ago my midi played through Garageband with no problems. Today it does not play. The Garageband window shows that the keys are being played.
In the moments following I turned on iTunes and all was fine so I burned a disc in my usual factory installed burner, late 2008 iMac, and the message was "no disc burner found". I turned iTunes on and off and same message. Ran Disc Utility and no flags. I am using the Disc Utility that is on my desktop. Is there a hidden Lion disc utility? Nothing worked unless there is a hidden function.
I was able to burn using Toast. This would indicate that the problems is with iTunes 10, OS 10.7.1

Netflix plug in error after lion install

What is the fix for Netflix plug in error after lion install?

I reinstalled the plugin from a Netflix email, still get this problem:
I don't have private browsing on, by the way.

I can't find iSync after lion install

I can't find iSync after lion install. I try too sync with my N8 Nokia. The program iSync dont appear in program mapp.

It's Apple's software not yours and as shown by it's exclusion on the OS X Lion pages is not part of the new OS. Upgrading to Lion is optional.
It's a trivial matter to copy it back from your Snow Leopard backup, but using it under Lion is not supported at all and WILL stop working sooner or later.
Why would it be sensible for Apple to include software in their new OS that they know will stop working?

IPhoto 8.1.2 Double Library File After Lion Install

Hi, After Lion install I'v got a double iPhoto Library File in iPhoto 8.1.2 whil I have only one library.
Is this normal ? Is there a way to get rid of one of the two files or to combine them ? On other Macs only one file shows up.
See screenshots.
In the Finder only one iPhoto Library appear in the images file.
This is the content of the IPhoto Library package :

That's an issue with the Dock. I would trash the Dock caches. I would post on the Using Mac OS X forum for more on that.

Office not starting after Lion install - PowerPC issues?

I have an Intel MacBook Pro (Intel Core 2 duo)
It was running OK on Snow Leopard.
I had Office (do not remember exactly which version, but recent).
After Lion installing, I cannot open any more any of the Office applications.
This is the message I get
You can't open the application Microsoft Excel because PowerPC applications are no longer supported.
What is worse is that not even the Microsoft Autoupdater opens up as well.
I never used a powerpc chip. I am surprised to read in the System Information that this is the setup for Excel
Microsoft Excel:
Version:          11.6.4
Last Modified:          4/5/11 4:19 PM
Kind:          PowerPC
64-Bit (Intel):          No
Get Info String:          11.6.4 (110422), © 2004 Microsoft Corporation. All rights reserved.
Location:          /Applications/Microsoft Office 2004/Microsoft Excel

Hardcyber wrote:
Microsoft Excel:
Version:          11.6.4
Last Modified:          4/5/11 4:19 PM
Kind:          PowerPC
64-Bit (Intel):          No
Get Info String:          11.6.4 (110422), © 2004 Microsoft Corporation. All rights reserved.
Location:          /Applications/Microsoft Office 2004/Microsoft Excel
As the last line (above) states, you are using Office 2004, and that will not run on Lion, upgrade to Office 2011 or Open Office or Neo Office or Libre Office.

Have an original iPhone 3G. Can you still sync iTunes (10.6) and Contacts after Lion install?

Have an original iPhone 3G. Can you still sync iTunes (10.6) and Contacts after Lion install?

An older iTunes will not open the library once used by a newer version.
iTunes 10.6.3 will work with iOS6 as long as the hardware doesn't post-date the release of 10.7 Use iTunes 10.6.3 on both machines.
iTunes 10.6.3.25 - http://support.apple.com/kb/DL1575

Cant print document after lion installation with my fuji xerox printer

i cant print after lion installation with my fuji xerox c1110b printer, even after i remove and reinstall the driver.
in the print window under status indicate error,
for other program even the print button is not working, need help
thanks

As a temporary fix until the new driver, you can still use Generic PCL Laser printer selection to print black and white on Fuji Xerox C1110B. When adding the new driver, select Options & Supplies. When the new window rolss down, click on the middle Driver button. Then select Generic PCL Printer, and OK.
Maybe there is another substitute driver we can use to print in color as well until Fuji Xerox gets its act together?

Built in iSight not working after Lion install

First I thought it was iglasses which I removed. I then unplugged my secondary Logitech cam; but still I can't get any image from the Built in iSight Camera after my Lion install.
It shows up as a USB peripheral in the mac System Profiler. What gives?
Thanks

Hi, i read this very useful post to undestand why my iSight camera won't work under Quicktime video recorder, on Mac OS X Lion 10.7.2. I was sure it worked in the past, and for example Photo Boot works, Skype works but not Quicktime. I tried the reset pause, and anything happens. Solution for me was the idea of disconnect some USB peripherical. It was my external audio card for me, a Focusrite Scarlett 8i6 audiocard. It starts to work immediately. If i reconnect the audio card after the working window in Quicktime, it seem to continue to work in a perfect way, but if i close and reopen Quicktime iSight still blocked. Very strange, anyway i just can make it start when i need. I hope this will be useful to others.

Stuck at login screen after Lion install

I downloaded and installed Lion on my late 2008 mbp with the latest updated snow leopard and after the install, I'm stuck on a screen with icons of my users. If I click nothing happens. I tried repairing disk permissions as well as re-installing Lion but nothing has helped. Any ideas?

You might see if this works:
Clearing Caches to Fix Login Problem
You will need to type some Unix commands. If you are not comfortable with this, I don't know of anything other than a re-install. But if you are careful, you should be OK. I recommend you print this out in a largish mono-spaced font so you don't miss any spaces (or add extra ones). Note that case is important.
Be careful. Some of these commands are dangerous, since you are going to be root.
Start up in Single-user Mode. When this has finished you will see a prompt ending in '#', although there may be other messages. Enter the following commands after the prompt:
/sbin/fsck -fy
Press RETURN. Wait a few seconds for 8-10 lines of output. If the last line says repairs were carried out, repeat this command until you get a message 'The volume <yourdiskname> appears to be OK'. Then continue with:
/sbin/mount -uw /
cd /Library/Preferences
rm com.apple.loginwindow.plist
rm com.apple.windowserver.plist
cd /Library/Caches
rm -r *
cd /System/Library
cd /System/Library/Caches
rm -r *
reboot
Press RETURN after each command.
This should now take you to a proper login screen after the normal boot sequence. You should then Repair Permissions by using Disk Utility (in your /Applications/Utilities folder).

Slow Internet after Lion Install

Lion installation was successful on a Mac Mini. The only problem I have is a slower internet connection.
I am getting about 2 to 3 Mbps for download when it should be about 10 -12 Mbps. On another Mac stil running on Snow Leopard I'm getting an excellent download speed. I cannot see how this could relate to the Lion install, but after dealing with the modem, router and checking that other Macs have good internet access, I turned to this forum.
I am using a Cisco Valet plus router. Lion was installed on a Mac Mini. 802.11g The RSSI value is -70. Transmit rate is between 12 and 18.
Any ideas?

From the menu bar, select
 ▹ System Preferences... ▹ Network ▹ Advanced... ▹ DNS
Under DNS Servers you should have one or more numerical addresses, such as “192.168.1.1” or “10.0.0.1”. What are those addresses?

Xerox printer pause after Lion install

Similar Messages

Maybe you are looking for