Xfburn fails to detect the burner

[andyrtr@workstation64 trunk]$ xfburn
** Message: Using Thunar-VFS 1.1.0
** Message: Using HAL
** (xfburn:9908): WARNING **: Could not get list of devices from HAL: The name org.freedesktop.Hal was not provided by any .service files
** Message: HAL said there are -1 burners, checking libburn if it can detect any
** (xfburn:9908): WARNING **: There are 1 drives in your system, but none are capable of burning
** Message: Using gstreamer transcoder.
(xfburn:9908): GLib-GObject-CRITICAL **: g_object_get: assertion `G_IS_OBJECT (object)' failed
Speicherzugriffsfehler (=SEGFAULT)
Any idea? Brasero is working well here.

You could give graveman a try: http://aur.archlinux.org/packages.php?ID=43499
Its a simple program and it seems to work just fine here.

Similar Messages

Getting an error in KPI Modeler as "{"customMessage":"failed to detect the sap language of the current session language","status":500}"

Hi Experts,
We have installed UISKPI01 in SAP NetWeaver Gateway System for Fiori Analytical Apps (KPI modeler is necessary to model the KPI) but while trying to create and Save the Group, we are Getting an error in KPI Modeler as "{"customMessage":"failed to detect the sap language of the current session language","status":500}". Similarly, when we are trying to edit the existing KPI template and assigning the Variants and Evaluations, we are facing the same error as failed to detect the sap language of the current session language","status":500.
Any idea on above error?
Thanking you,
~ Mahendra

Hello Mahendra,
Check if you have entries in the T002 table of SAP_SSB schema.
If not follow the steps mentioned in the admin guide of SAP Smart business to populate data.
This should resolve this issue.
Note: My assumption is that, you are accessing the KPI modeler in English Language.
Thanks,
Debasish

The burn to the PIONEER DVD-RW DVR-K06A drive failed. Verifying the burned

I am trying to burn an album from iPhoto '09 and I receive the following error message:
The burn to the PIONEER DVD-RW DVR-K06A drive failed. Verifying the burned data failed.
I have attempted 3 different times using the same media that worked prior to my upgrade to Snow Leopard. Prior to the upgrade I didn't have any problems.
Any help would be appreciated.

Same for me here...no luck with TDK DL DVD +R. Seems that this drive is extremely picky with DL supports (http://discussions.apple.com/thread.jspa?threadID=1181990).

Failed to detect hard drive at the first boot

My new system always failed to detect the hard drive at the first boot, but it's ok if restart it. Not use Raid (disabled). Any help will be greatly appreciated. ?(
Yingsheng
KT3-Ultra-ARU
AMD XP1900
GF2MX400
512 PC2100 Mushkin
300W Antec PSU
Western 40G7200PM
Buslink DVD-ROM
Sony CD-RW

Quote
Originally posted by Yingsheng
My new system always failed to detect the hard drive at the first boot, but it's ok if restart it. Not use Raid (disabled). Any help will be greatly appreciated
That is another classic symptom of a WD hard drive being jumpered as either a master or a slave when there is no other drive on the cable with it. If the drive is the only drive on the cable, then remove the jumper from the drive.

Verifying the burned data failed.

I am trying to burn a disc using the “Burn” tab in iPhoto. There are 648 photos and 17 videos for a total of 3.3GB on a 4.7 GB DVD+R disc.
The following appears
Burning to the Super Drive drive
Writing track1
Verifying Disc
BURN FAILED
The burn to the SuperDrive drive failed. Verifying the burned data failed.
I used the same to burn a smaller disc photos plus videos a few weeks ago and it worked fine.
Anyone know how to solve this?

How does the disk behave? Are you able to view its contents or view it with iPhoto? I had that message a long time ago but the disk performed OK.
OT

X fails to detect monitor supported resolutions

I have 3 monitors connected to a Radeon HD 7750, using the radeon driver:
Left: NEC MultiSync 90GX², 1280x1024, connected via DisplayPort-to-VGA adaptor
Middle: Samsung SyncMaster BX2335, 1920x1080, connected via DVI
Right: LG Flatron Wide, 1680x1050, connected via HDMI
On every reboot (warm or cold), X fails to detect the NEC monitor's supported resolutions. xrandr will only set it to 1024x768 or less, and it shows "no signal". However if I disconnect the VGA cable, plug it into another monitor (which is broken, but still powers on), and run xrandr again, it lists up to 1280x1024. If I then set the correct modes and layouts, then return the VGA cable to the NEC monitor, it works just fine. Turning the display off via xset doesn't cause any issue either. So on every reboot I have to move the cable to a spare monitor, set up xrandr, then move the cable back.
How can I save this working configuration and force X to apply it on boot even though the monitor for some reason claims to not support it?
I didn't have this issue with Ubuntu, but my setup was a bit different there, so possibly it just didn't manifest.
Here is the Xorg.0.log and journalctl -k from the most recent boot. The get-edid output is also interesting (and contains some control characters which pastebin removed).

The NEC on DVI would be only temporarily to get it's real edid-data .
Once you got that in a file, you can use a special kernel parameter at boot to force use of the real edid-data for the NEC monitor.
https://wiki.archlinux.org/index.php/Ke … s_and_EDID describes how it could be done.
Note that configuring this is tricky.

Xw6400 fails to detect SSD

Hello
I fitted a Samsung SSD to my xw6400, after updating the BIOS and applying the BIOS settings outlined elsewhere. I never did manage to get AHCI Mode actuivated, even after doing a complete reinstall of Windows 8 and 8.1, but the performance boost is quite good enough without it.
My concern is that sometimes when I restart the machine from Windows, it will fail to detect the SSD, which is the system drive. It doesn't happen often and it's not a big deal anyway, since, if I switch off and on again, it does always discover it at power-on. This may prove to be a problem, though, if I'm away from home and need to access the machine remotely. Of course, I could avoid it by switching off Windows automatic updates before I leave home, but the problem is being old, so I will probably forget.
Does anyone have any ideas how I can remedy this?
Thanks in advance.

Hi:
If you are using a SATA III SSD, this may be the problem...
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?javax.portlet.begCach...
I had the same thing happen to me on my dc7800 CMT when I installed a SATA III WD mechanical hard drive.
When I put the HP 1 TB Seagate hard drive from my HP 8200 Elite into the dc7800, it worked just fine as did the WD SATA III drive in my 8200 Elite.

Notebook failed to detect Creative N400 speaker

I've been using the speaker for a while. Lately, it fails to detect the speaker as creative speaker. It starts to detect the speaker as UAC3556B (USB audio device from Microsoft). There is no sound but function like stop and play is still working. I've also uninstall and reinstall the creative driver. The same problem would occur. I have also tried it on 2 other notebooks previously installed with the creative driver. The same problem would occur and it start to detect the speaker as UAC3556B.
Anyone out there know how to solve this problem? Speaker spoilt?
Thank you.
Regards.

Run the Creative Suite Cleaner Tool and try again.
Mylenium

I got an error message while burning a cd in itunes - "The attempt to burn a disc failed. The burn failed because of a medium write error. What is that and how can i fix it?t

I got an error message while burning a CD in iTunes - "the attempt to burn a disc failed. The burn failed because of a medium write error." What does this mean and how do I fix it?

The disk you are using probably has a defect, not uncommon on consumer grade disks. Try another disk or better yet another disk from a different manufacturer or at least a different batch.

Error Message while trying to burn a DVD-R with my MacBook Pro: "The disc can't be burned, because the device failed to calibrate the laser power level for this media.

While using my Mac OS X Version 10.6.8 to burn a DVD-R I keep getting the error message: "This disc can't be burned, because the device failed to calibrate the laser power level for this media."
So, I tried the iDVD and got the same error message.
Can anyone out there help me? I've tried both a DVD - R, and a CD.
I made a short 2:20 minute presentation from iMovie and used the "share" to iDVD, then to iTunes, then I tried exporting it to Quicktime and saved it on my desk top. That is when I tried burning by opening the blank DVD-R in the finder then draging the movie on to it and selecting the burn option. Thank you for your time in helping me with this frustrating problem.
Peace, Pyxidis

I have had that same problem, but it was unrelated to any upgrade.
In my case the optical drive was simply failing, and I replaced it - it was a Powerbook, about eight years old.
It is possible that it's unrelated to Lion, as unlikely as this may seem, since you've just upgraded.
Optical drives seem to be the most life-limited component in these computers. The laser just seems to get weak with age.

The Attempt to burn disc failed. The burn failed because of a medium write error.

When trying to burn a CD, I'm getting an error that reads:The Attempt to burn disc failed. The burn failed because of a medium write error. I experienced this message before and took my Macbook in to the store and the the genius was stumped but when he tried one of his CD's it burned fine to he concluded that the problem was in the CD's NOT the Macbook or program HOWEVER, months later, I'm having the same issue using the NEW CD's. Does anyone have any information about this?

3 methods to fix this:
The first is to reset pram
at boot up hold four keys down till you hear 3 chimes:
command(apple)=option+p+r
release keys and it will now reboot.
The second is to reset nvram
at boot up hold four keys down:
command(apple)+option+o+f
a black screen will appear
now type: reset-nvram
click enter
now type: reset-all
click enter
it will now reboot
The third is to open system preferences.
go to international
under languages: drag any of the other languages to the top, then drag english back to the top.
make sure "order for sorted lists" is set to english
make sure "word break" is set to english(united states, computer)
then restart.
I hope this helps you as it certainly did me. :^)

I am getting an error every time i try to burn a playlist. The error reads The Attempt to burn disc failed. The burn failed because of a medium write error.

Can somebody help me. I used to be able to burn with no problem. But now while finishing discs, I get the following message.
The Attempt to burn disc failed. The burn failed because of a medium write error.

Try a different brand of discs. Try restarting your computer.

TS1436 I received this message twice on 2 new & separate attempts to burn a playlist to a NEW cd: "The attempt to burn a disc failed. The burn failed because of a medium write error." What is a "medium write error" and how can I deal with this?

I received this message twice on 2 new & separate attempts to burn a playlist to a NEW cd: "The attempt to burn a disc failed. The burn failed because of a medium write error." What is a "medium write error" and how can I deal with this?

Hello Pat,
The following article provides troublehsooting steps and information that can help get iTunes burning discs again.
Can't burn a CD in iTunes for Windows
http://support.apple.com/kb/TS1436
Cheers,
Allen

HT1751 On an old Mac I got this message while trying to burn a CD for the car: "The attempt to burn a disc failed. The burn failed because of a medium write error." What does this mean? And how do I work around it?

On an older Mac I got this message while trying to burn a CD for the car: "The attempt to burn a disc failed. The burn failed because of a medium write error." What does this mean? And how do I work around it?

I had been getting this all morning and checked other messages from the community. THe one which worked was trying a different brand of disc.
I had been using Verbatim which had copied the music fine off the Real Player on my PC at school, but wouldn't work with I Tunes. Tried a Staples and an Office Depot CD-R , both of which did the job.

How do I deal with this error message when burning DVD's: The disc can't be burned, because the device failed to calibrate the laser power level for this media.

I am getting this error message when trying to burn a DVD: The disc can’t be burned, because the device failed to calibrate the laser power level for this media. iMac, Mac OS X 10.6.8 Memorex DVD-R 12x Any ideas?

First, try a different batch of recordable DVDs. If you still have problems, you may want to make an appointment at the genius bar and have it checked. The drive may be failing.

Xfburn fails to detect the burner

Similar Messages

Maybe you are looking for