XFCE automount does not work

I got this message when insert a disc/flash
Rejected send message, 1 matched rules; type="method_call", sender=":1.35" (uid=1000 pid=2380 comm="exo-mount) interface="org.freedesktop.Hal.Device.Volume" member="Mount" error name="(unset)" requested_reply=0 destination="org.freedesktop.Hal" (uid=0 pid=1728 comm="/usr/sbin/hald)).
so, I'm unable to use automount on xfce for disk/flash. Could you help me somehow?
Last edited by linuxgod (2009-12-12 16:00:59)

http://wiki.archlinux.org/index.php/HAL … ting_fails

Similar Messages

External USB HD does not work with HAL:

External USB HD does not work with HAL:
From the last 10 days the HAL auto-mount with ntfs-3g file system of my external hard drive does not woks.
But the manual mount procedure with the command mount -t ntfs-3g /dev/sdb* /mnt/XYZ works.
I've followed the instructions in the wiki: http://wiki.archlinux.org/index.php/HAL and the system has worked up to the last kernel or HAL update.
My fat32 usb-stick works without any problem.
If I try to open the device with KDE it appears an error popup wit this message:
TODO: have to rethink extra options
Error: kio_media_mount_helper
The log from the kernel.log is
Nov 6 22:03:16 myhost usb 5-1: new high speed USB device using ehci_hcd and address 4
Nov 6 22:03:16 myhost usb 5-1: configuration #1 chosen from 1 choice
Nov 6 22:03:17 myhost Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Nov 6 22:03:17 myhost ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 6 22:03:17 myhost Initializing USB Mass Storage driver...
Nov 6 22:03:17 myhost scsi6 : SCSI emulation for USB Mass Storage devices
Nov 6 22:03:17 myhost usb-storage: device found at 4
Nov 6 22:03:17 myhost usb-storage: waiting for device to settle before scanning
Nov 6 22:03:17 myhost usbcore: registered new interface driver usb-storage
Nov 6 22:03:17 myhost USB Mass Storage support registered.
Nov 6 22:03:22 myhost scsi 6:0:0:0: Direct-Access WDC WD32 00JB-00KFA0 0811 PQ: 0 ANSI: 0
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sdb: sdb1
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Attached SCSI disk
Nov 6 22:03:22 myhost sd 6:0:0:0: Attached scsi generic sg2 type 0
Nov 6 22:03:22 myhost usb-storage: device scan complete
and the error.log is
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Do you have some idea ....
Bye.

I have done the following:
Downloaded the patched hal version.
used makepkg in /abs/local/trunk/ to create a pkg for pacman
used sudo pacman -U pkgname to install it.
used sudo nano /etc/hal/fdi/policy/preferences.fdi to create the fdi file with the following content:
saved the file and removed my ntfs entryes from fstab and rebooted. and still there is no automount off ntfs partitions.
have i done something wrong?
br fjodork
WARNING: what follows is a guide of what did work for me, I'm still in an early stage of learning linux, so please correct me if anything of what follows is wrong/dangerous/stupid. As I said, this worked for me, it's not pretty, since I was learning each step on the fly and I'm sure there are better ways to do this.
So fjodork, you seem to have done the the necessary steps, though i couldn't get it to work until i first removed hal without dependencies
pacman -Rd hal
it will give you some warning about the dependencies, ignore it since we are reinstalling hal in a few steps.
First i tried to follow Raymano's link, obviously it showed me nothing in the browser so I thought it might be a broken link.
So I downloaded the source tarball from here http://hal.freedesktop.org/releases/hal-0.5.10.tar.gz
unpacked it changed the /tools/hal-storage-mount.c as per Milfadoodle's instructions.
at first I tried to compile directly from source, the process would finish without a glitch though after reboot nothing changed, as if hal weren't
installed, i guess there were issues with paths. anyway read on
Then repacked the source in tarball, copied it to /var/abs/extra/system/hal and modified the PKGBUILD as follows
makedepends=('pkgconfig' 'gperf')
options=('!libtool')
install=hal.install
source=(${pkgname}-${pkgver}.tar.gz #removed url so makepkg looks in the current directory for the tarball
hal
hal-policy.patch
cryptsetup_location.patch
hal-0.5.9-hide-diagnostic.patch
ntfs3g-valid-options.patch)
md5sums=('6641c30a27c00485c6accac5110ff911' # replace with md5sum of your package's sourceball (run md5sum filename)
'882f67668cb14a0a9e4a27ef22278027'
'5ba8b610aa9763a5f42b9f7cbd7a86ad'
then makepkg (i had to add --asroot, don't ask why
and finally pacman -U hal-0.5.10-1-i686.pkg
another reboot and everything worked without a glitch!:D (yeah i know i still haven't got rid of the reboot mentality )
I have also put the policy files as per the wiki instructions.
PS: I know this is a dirty way to getting things done but as i said, I'm just starting
If anyone could comment/correct/explain this post I'd be more than happy, the automount issue was bothering me for about a month now (you'll say why do I need ntfs in the first place? well, I only recently switched for Linux as my primary OS, these are some relics of the M$ era

Ls++ does not work

when i install ls++ in AUR form yaourt it's work but, whenever i try ls++ command on XFCE terminal again not working
this the error
Can't locate Term/ExtendedColor.pm: Permission denied at /usr/bin/vendor_perl//ls++ line 10.
BEGIN failed--compilation aborted at /usr/bin/vendor_perl//ls++ line 10.

karol wrote:
No idea why you have 2 slashed:
/usr/bin/vendor_perl//ls++
Does it work in other terminals?
Did you relogin after installing?
Is your system up to date?
not work in other terminal
yes
yes
Kaustic wrote:
More than two slashes are always truncated to one internally:
ls -l /////////////bin////bash
-rwxr-xr-x 1 root root 721K Jun 1 01:10 /////////bin///bash*
http://unix.stackexchange.com/questions … rname-file
I love all these little historical nuances in the history of UNIX ♥
so I had to follow the link above?

Keyboard layout switching does not work if I connect a second keyboard

When I connect an external keyboard (a very ordinary Dell keyboard, no extra keys or something unusual) to my laptop, XFCE keyboard layout switcher disappears from a the and keyboard shortkut meant to switch also does not work. Rebooting with the keyboard initially attached does not help. Any ideas how to fix?

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Is Time Capsule Apple's way of admitting AEBS Disks does not work?

The support/discussion area is full of posts from many of us who have struggled to find a working solution for our Airport Extreme Base Stations with an attached disk drive; our frustration and patience has been tested as this was a promised technology, advertised to work at sale of the AEBS. Moreover, Apple touted the wireless backup with Time Machine as Leopard got close to shipment, but pulled the technology at the last minute.
So my question to Apple is, are you now admitting that AEBS + Disk simply does not work, and if so what are you going to do for those of us to bought into a technology promise that has simply failed?
Any insight, suggestions, patches, or even communication would be a HUGE and welcome change given the misinformation we have endured to date.

Interesting points from several of you. I am sure if these are global issue I might not have encountered them due to my light usage of AEBS external disk to date. That stems of course from my heavy usage of my Linux server mentioned earlier. I am sure that I might encounter some of them if a moved all my data onto an "Air Disk."
It sounds however that the problems are more OS X / Air Disk Client issues than AEBS from this point of view. Without actively troubleshooting them it's hard telling. Just a couple thoughts - please ignore if already covered elsewhere:
1. For the "after a couple days - vanished" issue: Have you also tried another OS other than OS X? (Windows, Linux, Solaris, BSD, anything with a samba client) Are you connecting via Air Disk or SMB? I do not know the internals of Air Disk, but I have been using the samba services of the AEBS.
2. As for automount, this very much sounds like a problem with the Volume Manager in OS X. Have you sniffed the network to determine if the VM is sending out the request for mount?
3. Finder not showing unless displayed/accessed via Desktop sounds 100% OS X problem.
4. 10.4 vs. 10.5 issue again points to OS X.
5. Access permissions: This is a common issue with NAS storage. Most times it comes back to end user not understanding the capabilities or poor/incomplete documentation of the product again causing misunderstanding. I would guess given the "it just works" mantra that the documentation is somewhat lack luster causing end user confusion.
6. Time Machine Target: I agree and they should fix this. Especially with another near identical product being released. I expect an firmware update for the AEBS when TC is released.
I am not trying to be a PITA, just trying to lend my knowledge/experience to the community. I have been working with carrier class networking and storage for nearly a decade. That being said, I don't expect this device to keep pace with those environments or feature sets. This is old news for that space, but cutting edge for the SOHO and consumer space. There will be bumps in the road caused by both the vendor and end user.
I think the most important things to determine is if "Air Disk uses SMB/Bonj/etc or a proprietary application protocol. Then if the problem is with Air Disk or direct SMB access (or both.) Lastly it needs to be determined if this is a client (OS X / Air Disk) or server (AEBS) problem. These issues can not be solved until one device is pinpointed as the cause for each of these issues. Many of these in fact sound like client issues in OS X and it's supported applications. (Particularly TM sounds at fault since I can not use my SMB shares on my Linux server as a target.) I am willing to help troubleshoot, but only to an extent since we all paid Apple the money not me. =)

Installed Premiere Pro CS4 but video display does not work?

I just got my copy of CS$. After installing Premiere I found two things that seem very wrong:
1) video display does not work, not even the little playback viewer next to improted film clips located on the project / sequence window. Audio works fine.
2) the UI is way too slow for my big beefy system.
My pc is a dual boot Vista-32 and XP system with 4GB of memory installed and nvidia geforce 280 graphics board with plenty of GPU power. The CS4 is installed on the Vista-32 partition. My windows XP partition on the same PC with Premiere CS2 works great and real fast.
Any ideas how to solve this CS4 install issue?
Ron

I would like to thank Dan, Hunt, and Haram:
The problem is now very clear to me. The problem only shows up with video footage imported into PP CS4 encoded with "MS Video 1" codec. So this seems to be a bug. The codec is very clearly called out and supported within various menues but video with this codec just will not play in any monitor or preview window. In addition the entire product looks horrible with respect to performance while PP CS4 trys its best to play the video. Audio will start playing after about 30 seconds. And once in awhile part of video shows up at the wrong magnification before blanking out again.
My suggestion to the Adobe team: fix the bug and add some sample footage to the next release so new installations can test their systems with known footage.
My PC is brand new with the following "beefy" components:
Motherboard
nForce 790i SLI FTW
Features:
3x PCI Express x16 graphics support
PCI Express 2.0
NVIDIA SLI-Ready (requires multiple NVIDIA GeForce GPUs)
DDR3-2000 SLI-Ready memory w/ ERP 2.0 (requires select third party system memory)
Overclocking tools
NVIDIA MediaSheild w/ 9 SATA 3 Gb/sec ports
ESA Certified
NVIDIA DualNet and FirstPacket Ethernet technology
Registered
CPU: Intel Core 2 Quad Q9550
S-Spec: SLAWQ
Ver: E36105-001
Product Code: BX80569Q9550
Made in Malaysia
Pack Date: 09/04/08
Features:
Freq.: 2.83 GHz
L2 Cache: 12 MHz Cache
FSB: 1333 MHz (MT/s)
Core: 45nm
Code named: Yorkfield
Power:95W
Socket: LGA775
Cooling: Liquid Cooled
NVIDIAGeForce GTX 280 SC graphics card
Features:
1 GB of onboard memory
Full Microsoft DirectX 10
NVIDIA 2-way and 3-way SLI Ready
NVIDIA PureVideo HD technology
NVIDIA PhysX Ready
NVIDI CUDA technology
PCI Express 2.0 support
Dual-link HDCP
OpenGL 2.1 Capaple
Output: DVI (2 dual-link), HDTV
Western Digital
2 WD VelociRaptor 300 GB SATA Hard Drives configured as Raid 0
Features:
10,000 RPM, 3 Gb/sec transfer rate
RAM Memory , Corsair 4 GB (2 x 2 GB) 1333 MHz DDR3
p/n: TW3X4G1333C9DHX G
product: CM3X2048-1333C9DHX
Features:
XMS3 DHX Dual-Path 'heat xchange'
2048 x 2 MB
1333 MHz
Latency 9-9-9-24-2T
1.6V ver3.2

A2109 tablet autorotate does not work

The autorotation on my recently purchased tablet A2109 does not work. I look in settings and the auto rotate field is not highlighted, I therefore cannot choose to turn it on.The tablet has the Android jellybean OS and I did update it but to no avail. Can anyone help?
Thanks
Solved!
Go to Solution.

Dear tdsouza
Welcome in lenovo forums
just a clarification , do you mean option Rotate is dimmed in setting
Please let me know
Thanks
Alaa
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

For what reason on my tablet with OS Android 4.1 does not work flash on the sites?

Hi! I recently bought a Google Nexus 7 tablet with Android 4.1 operating system and on my tablet does not work flash sites. Why adobe does not release a new version of flash for android 4.1? Why it was necessary to buy a company Macromedia, if adobe does not want to develop web technology? I think against Adobe can sue for violation of antitrust

I found this for example:
http://www.slashgear.com/adobe-no-jelly-bean-flash-flash-player-pulled-altogether-august-1 5-29236404/

My flash flayer does not work on my Windows 8 Surface Tablet, it also won't let me see if i already

My flash flayer does not work on my Windows 8 Surface Tablet, it also won't let me see if i already have it installed...

1.      Are you getting any error message?
2.      Which browser are you using?
3.      Were there any recent changes made on the computer prior to the issue?

My flash player does not work on my tablet.

My flash player does not work on my tablet

Your tablet uses Android OS.
There is no more Flash Player for Android and there won't be another. Android is no longer compatible with Flash Player. Playing Flash content is very processor consumptive and it drains your battery, also shortening the life of it. Android (Google) recommends using either "Dolphin" or "Puffin" as your browser if you need to view Flash content with a mobile device running Android. They're both free in the GooglePlay store. These browsers use "server side" rendering to reduce the load on your device.

Dynamic image does not work in the template builder plug-in (Apex-BI Intgr)

Hi all, I posted this problem in the BI Publisher topic but nobody responded maybe this is because mods thought this is an Apex-BI integration issue.
If I'm in the wrong place, please do warn me.
The documentation says:
Direct Insertion
Insert the jpg, gif, or png image directly in your template.
...This works obviously
URL Reference
1. Insert a dummy image in your template.
2. In Microsoft Word's Format Picture dialog box select the Web tab. Enter the following syntax in the Alternative text region to reference the image URL:
url:{'http://image location'}
For example, enter: url:{'http://www.oracle.com/images/ora_log.gif'}
...This works too when I hardcode an url as url:{'http://www.google.com.tr/images/firefox/mobiledownload.png'}
Element Reference from XML File
1. Insert a dummy image in your template.
2. In Microsoft Word's Format Picture dialog box select the Web tab. Enter the following syntax in the Alternative text region to reference the image URL:
url:{IMAGE_LOCATION}
where IMAGE_LOCATION is an element from your XML file that holds the full URL to the image.
...This, however, does not work.
I use Apex' report query tool and My query is like
select 'http://www.google.com.tr/images/firefox/mobiledownload.png' IMAGE_LOCATION from ... (a single result set for my template)
the xml data is generated with an IMAGE_LOCATION tag. I load it to word template plug-in. The Url successfully displays in the report if I make it a plain-simple field.
But when it's in the image format->web->alt text as url:{IMAGE_LOCATION} no image displayed.
I need to keep this design procedure simple so a simple word user could design a report via using just template builder plug-in. I don't wish to explore the xsl-fo area...yet.
Could you tell me why I can't get this url:{IMAGE_LOCATION} to work?
Regards
PS: My BI version: 10.1.3.4.1

Hi Oeren,
your steps seem basically to be correct. I have a tutorial how to do this here (in german)
http://www.oracle.com/webfolder/technetwork/de/community/apex/tipps/pdf-dyn-images/index.html
when you see the URL corrently as long as you have it as a plain text field, the XML tag and the
referencing seem to be OK.
Here are two thought - the issue might be one of these ...
How did you insert the dummy image into the word document - did you do it via "insert" or
via "link to file". "Link to File" does not work - you must choose the simple "insert".
Another one: Does your BI Server have a connection to the internet - is the proxy server correctly set ..?
Does this help ..?
Regards
-Carsten
Cloud Computing mit APEX umsetzen. Jetzt!
http://tinyurl.com/apexcloudde
SQL und PL/SQL: Tipps, Tricks & Best Practice
http://sql-plsql-de.blogspot.com

I have an event in my calendar that was sent by someone who does not work for the company anymore and I am reminded 2 times a week. How can I remove it?

I have an event in my calendar that was sent by someone that does not work for the company anymore and I am reminded 2 times a week. How do I delete it?

Tap on the event to open the event. Click the 'Edit' button in the event bubble, then press the 'Delete Event' button at the bottom of the Edit pop-up. It's a little different for events that come through Microsoft Exchange, you tap the event to bring up bubble and click the 'Details' button, and then press 'Decline' to remove the event.

Thanks for responding. Since I upgraded ITUNES to IOS 6, my IPOD Touch no longer works at all. I had numerous apps, music and videos on this touch. It made me restore to factory reset and it still does not work!!! Nothing I do will work on this touch n

Thanks for responding. Since I upgraded ITUNES to IOS 6, my IPOD Touch no longer works at all. I had numerous apps, music and videos on this touch. It made me restore to factory reset and it still does not work!!! Nothing I do will work on this touch now. I have so much data on this, I don't want to loose or have to restore!
Can you help me?
Thanks

If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar

"HP laserjet professional utility" does not work in osx 10 (Yosemite)

All the major functions of this printer work fine in Yosemite, but not the "HP laserjet professional utility"The driver shown in System Preferences/Printer for my Laserjet P1606dn is version 6.9 (I am unable to knowif this is the version provided by the latest HP printer update, which was installed via the App Store.) I note this exact issue was raised for OSX7 in November 2014, but for a diiferent model printer. My printer is on my local wifi network, and that earlier case seemed to invove a direct USB connection. The solution offered in that thread, 4694464,may not be applicable now, so I seek advice In the panel for my 1606dn within System Preferences/Printer offers a button to launch the "HP Professional Utility", but when clicked an app launches called the "HP Professional Utility" but then nothing. I am trying to access the printer controls that will keep it from turning itself off when idle, and the documentation says the "HP Professional Utility" will allow that change. Please advise

Hey , Welcome to the HP forums! I hope you enjoy your stay here. I see that you are having some issues with adjusting the power save mode settings on your Laserjet P1606dn. I can help with that. First make sure the printer is plugged directly into a wall outlet and not a surge protector. If the printer is connected with an ethernet cable to a router then you may be able to do this instead:On the printer hold down the button that looks like a sheet of paper with an arrow on it for about ten seconds. This should print out a report.On your Mac open a browser and enter the printer's IP Address in your Address bar exactly as it appears on the page. When you are finished click on enter/return.This will open the printer's Embedded Web Server. In here you may be able to find some options to adjust the power save settings.If the above does not work then this troubleshooting may assist you with the utility:Go to Applications, and if you have it open the Hewlett-Packard folder.Run HP Uninstaller to remove any existing software from you system.On the Mac go to the Apple icon and Sytem Preferences.Open Printers and Scanners.Hold down the Command key and click on the picture of your printer on the left.Click on Reset Printing System.Go to Applications and Utilities.Open Disk Utility.Click on Macintosh HD on the left.Click on Verify Disk Permissions. This should take about ten minutes.Click on Repair Disk Permissions. This should take about ten minutes.Restart your Mac.Plug in the USB cable between the printer and the router.Check for Product Updates on your Mac.Try running the tool again.If this resolves everything please let others know by clicking on Accept as Solution below my post.
I hope this helps and I hope you have a great day!

I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

The sound seems very faint but can here static on playback.

XFCE automount does not work

Similar Messages

Maybe you are looking for