XFCE Icons
On my xfce-panel, my icons are not resizing correctly. The edges of the icons are getting cut off. It didn't always do this, it seems recent. Any ideas?
punkrockguy318 wrote: my bad... guess this means I won't be allowed to yell at people for not searching for a couple days...
You are forgiven. and no, you "must" tell other people to search "before" they start a new thread.
Xentac wrote:I hereby declare xerxes2 to be the official "search" reminder person.
Thanks xentac, it's a big responsibility but I will do my best. It was Dusty and dp that made me this good in "search reminding".
cactus wrote:Just a thought so that people don't get turned away by people with a giant obnoxious search graphic...
That's the beuty of "search reminding" on the highest level. There should not be something else other than the search pic. Text and links will just confuse people.
Similar Messages
-
XFCE icon box item shows applications from all workspaces
first of all using latest packages...
my XFCE icon box item on the panel shows all tasks from all workspaces regardless of the option "show applications from all workspaces"
the task list item does that properly
what could the problem be?
Last edited by _saiko (2009-04-25 11:04:16)moljac024 wrote:
_saiko wrote:
whoops wrote:
compiz.
You actually have all applications on one "workspace", it's just divided into several virtual view-ports.
well yes i thought of that since i really use compiz...
but i tried task list item and it works properly even with compiz and virtual ports so that's not an excuse...
Well then, task list takes virtual workspaces into account whereas the IconBox doesn't...
heh well obviously
but if they already removed the feature from task list and ported the icon only display as a separate plugin they should have implemented the "virtual view-ports awareness" too :\ -
I have a weird problem with my icons and XFCE. Some time ago my gedit icon in the taskbar had gone missing. After a while, I decided to erase my XFCE config and create a new and the icon was properly shown again. But during the time I configurated XFCE, it was again as a missing icon in the xfce taskbar. In the application menu the icon is shown correctly.
Furthermore, Midori shows at the position of the forward button the icon of rhythmbox's next button, but not always, just sometimes, depending on it's mood [Update: No, not depending on it's mood but if it's a shadowed or active button].
I guess my icon theme is somehow corrupted, but removing and reinstalling did not work (using 'gnome'). I also updated my icon cache without any change. If I change to another icon theme, the problem also remains.
Any suggestions?
[UPDATE] Yeah, I tried to remove my config again, but this time nothing was fixed by that.
Output of pacman -Qs icon:
local/elementary-xfce-icons 0.3-1
Elementary icons with better Xfce support
local/faenza-cupertino-icon-theme 1:9-2
Icon theme designed for Equinox GTK theme, recolored
community/faenza-icon-theme 1.3.1-2
Icon theme designed for Equinox GTK theme
extra/gnome-icon-theme 3.8.3-1 (gnome)
GNOME icon theme
extra/gnome-icon-theme-symbolic 3.8.3-1 (gnome)
GNOME icon theme, symbolic icons
extra/gtk-update-icon-cache 2.24.20-1
The GTK+ update icon cache tool
extra/hicolor-icon-theme 0.12-2
Freedesktop.org Hicolor icon theme
local/humanity-icons 0.5.3.11-1
Humanity icons from Ubuntu + Arch main menu icon
extra/icon-naming-utils 0.8.90-2
Maps the new names of icons for Tango to the legacy names used by the
GNOME and KDE desktops.
community/lxde-icon-theme 0.5.0-1 (lxde)
LXDE default default icon theme based on nuoveXT2
extra/oxygen-icons 4.11.1-1
The Oxygen Icon Theme
community/perl-gtk2-trayicon 0.06-10
Perl interface to the EggTrayIcon library
local/xfce4-quickening-icon-theme R4-1
Dark icons for whom like dark desktop themes
[/UPDATE]
Last edited by abc (2013-09-16 11:48:51)Same issue here. Removing ~/.config doesn't help for me though.
It also effects other icons, for instance urvxt - whereas xfce4-terminal displays it correctly (both are using accessories-terminal) -
Hello I recently switched from Arch Gnome to Arch XFCE on my laptop due to the catalyst driver not working with the gnome 3 (i don't like the open source driver - it over heats my cpu even with cpu scaling)... Anyway, my panel applet icons will not adjust to my theme, whether it's installed from xfce-look or a default xfce theme. Here's a screenshot to better explain my problem:
http://i1219.photobucket.com/albums/dd4 … 093823.png
I've tried a few things I found online but nothing fixes this... Any ideas?
-- mod edit: read the Forum Etiquette and only post thumbnails http://wiki.archlinux.org/index.php/For … s_and_Code [jwr] --
Last edited by Mr_ED-horsey (2011-05-21 01:10:09)Edit /usr/share/themes/NameOfTheme/gtk-2.0/gtkrc and find the section with many lines beginning with class, widget_class or widget. Add the following line
widget "*Xfce*Panel*" style "panel"
somewhere in that section. The panel style may have a different name, e.g. panel1 or panel2.
I managed to fix several themes with that, hope it will work. -
I've been experimenting with getting my xfce to look better, and tried out a few different icon packages, all installed in the ~/.icons directory like they should be. After a couple of tries, I noticed that not all of the icons would change-- the terminal icon and thunar icon for example never changed with any of them, nor did the Home folder or trash bin, even though I knew for certain those two had new icons available. Other folders got the right icon, but not the Home folder on the desktop.
Somehow in all of it, the "power button" on the panel turned into what looks like the AIM (or is it AOL?) running man. So I removed all the icon directories in ~/.icons, and restarted X going back to the default rodent set. I think it more or less worked, except I still have the stupid running man instead of the power button.
Anyone ever see this before? How can I fix it?
Edit: I tried doing pacman -Sfd xfce4 xfce4-goodies gtk2-themes-collection, but it's still messed up.
Last edited by beretta (2008-04-24 23:52:02)*bump*
Has no one seen this before? It's got me stumped. I guess I could go in and change it manually... -
Qtcreator ignores xfce icon theme
I think the title pretty much covers it. I've gone through the wiki page Uniform Look for QT and GTK Applications and it has a lot of great information for how to get themes without icons working in qt applications, but there doesn't seem to be much about how to get the icon themes over. I tried using the oxygen, faenza, and elementary icon themes but none of them seem to get picked up. Also qtconfig seems to have a bit of a mind of its own when it comes to theme selection, and lacks an option for picking an icon theme. Any help would be greatly appreciated, this issue has been bugging me for weeks!
Well, I came up with a very ugly hack for doing this. I really hope someone has a better solution. Basically I figured out that qtcreator is always pulling from the gnome icons, and if it can't do that then it looks like it generates the icons itself. So...I just renamed the gnome icon folder to something else and made a sym link to the icons I wanted to use instead. So if for example you wanted to use Faenza-Dark, you would do:
cd /usr/share/icons
mv gnome gnome_
ln -s Faenza-Dark gnome
Of course this is probably going to break as soon as the gnome icons get updated so I can't say I'm too wild about it, but it does give the desired behavior. -
Compiz, XFCE, and gtk-window-decorator
I recently caused my system to stop booting by messing with some stuff (yay for editing files and not reading the entire wiki page first!) and I ended up just deciding to do a clean arch install (when your system partition has 50Gb of programs on it, half of which you don't use, its probably time to clean anyway). I decided to use XFCE since that has been running very stably on my netbook for some time (usually around ~14 days of uptime until I forget to recharge the battery and it turns off) in favor of Gnome or KDE since I have been having lots of problems with them and stability (usually 1-2 days of uptime until I have to end up restarting because of a freeze or something)
My one beef with XFCE on my desktop computer compared to my netbook was its lack of eye candy stuff. I feel like I am underusing my computer. So, I decided to try installing compiz on it. I read on the wiki page that using emerald was buggy and so I decided to use gtk-window-decorator for a window decorator. I have a whole bunch of Gnome3 themes in my home directory since previously I had gnome installed and so I was wondering, why can't I seem to change the window theme?
The window theme is stuck in this big blocky mode that doesn't look horrible, but I would sure like to be able to change it. I have gnome-tweak-tool installed, but switching the themes on that doesn't seem to have any effect (I may be switching on the wrong page, however). I like the xfce themes and I would like to be able to use those with compiz, but I just don't see how to do it. All my googling has brought up nothing about actually managing to change the gtk-window-decorator window decoration theme in compiz running in xfce on arch.
Last edited by Los Frijoles (2012-11-22 01:36:10)You are either not trying around & searching for solutions enough or not providing enough info on what you already did.
Did you try lxappearance?
Did you read https://wiki.archlinux.org/index.php/Xfce#Icons
... and make sure your icons are in the right location etc?
Did you check - and where necessary - try to fix the configuration as described here?
https://wiki.archlinux.org/index.php/Gtk -
[SOLVED] xfce upgrade 4.11 -- 4.12 : error loading libxfce4util.so.6
Hi guys,
I upgraded from xfce 4.11 (xfce4-*-devel packages) to xfce 4.12 today, but I have the following error with a bunch of different xfce4 apps (including xfdesktop):
# xfce4-settings-manager
xfce4-settings-manager: error while loading shared libraries: libxfce4util.so.6: cannot open shared object file: No such file or directory
I tried downgrading extra/libxfce4util 4.12.1-1 to aur/libxfce4util-devel 4.11.0-1 but then the error says libxfce4util.so.7 cannot be found.
Using ldd I found that the applications depend on both libxfce4util.so.6 and libxfce4util.so.7
ldd $(which xfce4-appfinder) | grep -i xfce4
libxfce4ui-1.so.0 => /usr/lib/libxfce4ui-1.so.0 (0x00007f681fa05000)
libxfce4util.so.7 => /usr/lib/libxfce4util.so.7 (0x00007f681ecd8000)
libxfce4util.so.6 => not found
I figure I have some package somewhere that didn't upgrade properly or something. Here's the list of xfce packages I have installed:
# pacman -Q | egrep xfce\|xfw\|xfd
elementary-xfce-icons 0.5-3
gtk-xfce-engine 2.10.1-1
libxfce4ui 4.12.0-1
libxfce4util 4.12.1-1
mint-backgrounds-xfce 2013.06.10-1
xfce4-appfinder 4.12.0-1
xfce4-artwork 0.1.1a_git20110420-4
xfce4-battery-plugin 1.0.5-4
xfce4-cpufreq-plugin 1.1.1-2
xfce4-cpugraph-plugin 1.0.5-3
xfce4-datetime-plugin 0.6.2-4
xfce4-diskperf-plugin 2.5.5-1
xfce4-fsguard-plugin 1.0.2-4
xfce4-genmon-plugin 3.4.0-3
xfce4-mpc-plugin 0.4.5-1
xfce4-netload-plugin 1.2.4-2
xfce4-panel 4.12.0-1
xfce4-sensors-plugin 1.2.6-2
xfce4-session 4.12.0-2
xfce4-settings 4.12.0-3
xfce4-smartbookmark-plugin 0.4.5-3
xfce4-systemload-plugin 1.1.2-2
xfce4-taskmanager 1.1.0-1
xfce4-terminal 0.6.3-2
xfce4-time-out-plugin 1.0.1-5
xfce4-timer-plugin 1.6.0-3
xfce4-wavelan-plugin 0.5.12-1
xfce4-weather-plugin 0.8.5-2
xfce4-xquisite-icon-theme 0.4.6-1
xfconf 4.12.0-1
xfdesktop 4.12.0-1
xfwm4 4.12.0-1
xfwm4-themes 4.10.0-2
zukitwo-colors-xfwm4 0.1-1
My current workaround, which seems sloppy but works just fine, was to create a symbolic link
sudo ln -s /usr/lib/libxfce4util.so.7 /usr/lib/libxfce4util.so.6
Any ideas?
Regards,
Walter
Last edited by rudametw (2015-03-10 17:24:46)Output of pacman -Qm
acroread 9.5.5-5
adwaita-x-dark-and-light-theme 1.3-1
aircrack-m4-svn r18-2
airoscript-ng 1.2rc3-7
avbin7 7-1
bbswitch-dkms-git v0.8.r0.g0c38f97-1
bfg 1.11.8-2
blueman 1.99.alpha2-1
bmpanel2 2.1pre1-5
brainworkshop 4.8.4-4
bully-git 1.0.22.1fef73a-2
bumblebee-git 3.2.1.r16.524ded1-1
chromium-libpdf 1:36.0.1985.143-1
chromium-pepper-flash 1:16.0.0.305-1
compton-conf-git 17.18e83fe-1
compton-git 0.1_beta2.59.g23d1dd1-1
crunch 3.6-1
delorean-dark-stripped-themes-3.8 10082013-2
desksanity-git 1.0.rev59.4150edd-1
dorian-theme-3.10 105222014-2
dropbox-cli 2.10.0-4
dropbox-dark-panel-icons 1.0-10
e-modules-extra-git 20141224-1
eclipse-anyedittools 2.4.11.201409071702-1
eclipse-bytecode-outline 2.4.0-1
eclipse-emf 2.10.2-1
eclipse-findbugs 3.0.0-1
eclipse-gef 3.9.101-1
eclipse-jadclipse 3.3.0-3
eclipse-m2e 1.5.0-2
eclipse-mylyn 3.14.2-1
eclipse-pydev 3.9.2-1
eclipse-rse 3.5-2
eclipse-wtp-wst 3.6.0-1
econnman 1.1-1
edgar-git 0.2.0.r24.f36ea5a-1
efx-git 1.11.99.150.2ffc023-1
elementary-xfce-icons 0.5-3
elementary_test-git 1.12.99.10859.6eb6320-1
elementary_test-git-debug 1.12.99.10859.6eb6320-1
emprint-git 0.1.0.67.a0886e1-1
enventor-git 0.4.0.r37.gec28195-1
ephoto-git 0.1.1.528.26b2ecf-1
equate-git 0.99.0.18.703693f-1
ev-git r49.a4ac44f-1
ewe 0.2.2-1
eweather-git 0.2.0.r74.59b35ab-1
exifread 1.4.2-2
firefox-theme-adwaita 35.1-1
focuswriter 1.5.3-1
font-manager 0.5.7-5
fontconfig-ttf-ms-fonts 1.0-2
freemind-git 20121104-1
garcon-devel 0.3.0-5
gcc-gcj 4.9.2-2
gcc-gcj-ecj 4.9-1
gcolor3 1.2.1-1
gerix-wifi-cracker-ng-git 20111025-2
glib 1.2.10-12
gmrun-multihead 0.9.2-2
gnomintu-icon-theme-git r90.595c6d6r90.595c6d6-1
google-chrome-dev 42.0.2311.22-1
google-talkplugin 5.38.6.0-1
gstreamer0.10-vaapi 0.5.9-1
gtg 0.3.1-1
gtk-theme-adt 0.2-1
gtk-theme-e17gtk 20141022-1
gtk-theme-murrine-arch 0.4-2
gtk3-nocsd 20140823-2
https-everywhere-chrome 2014.1.3-1
humanity-icon-theme 0.6.5-1
indicator-stickynotes 0.4.2-1
johnny 1.1.3-1
jpegoptim 1.4.2-1
latex-mk 2.1-2
lib32-gtk-engine-murrine 0.98.2-1
lib32-libpng12 1.2.52-1
lib32-pangox-compat 0.0.2-1
libappindicator-gtk2 12.10.0-4
libappindicator-gtk3 12.10.0-4
libappindicator-sharp 12.10.0-4
libdbusmenu-gtk2 12.10.2-3
libeweather-git 0.2.0.78.7548063-1
libindicator-gtk2 12.10.1-4
libindicator-gtk3 12.10.1-4
libpng12 1.2.52-1
mdk3 v6-4
mint-backgrounds-xfce 2013.06.10-1
modelio-open 3.3.0-1
mozplugger 2.1.6-1
nemo-dropbox 2.4.0-2
nodejs-bower 1.3.12-1
nodejs-grunt-cli 0.1.13-3
numix-themes-darkblue 2.5-1
nvidia-dkms 346.47-2
nvidiabl 0.87-3
nvidiablctl 0.2-2
ob-autostart 1-3
obapps 0.1.7-4
obex-data-server 0.4.6-10
okular-browserplugin 20121015-1
omg-suite 20130525-1
pasystray-git 0.4.0.r47.gef3dbb0-1
pavumeter 0.9.3-6
pdflatex.sh-git 20120111-1
pdftk 2.02-3
perl-algorithm-permute 0.12-2
perl-expect 1.32-1
perl-number-range 0.12-1
pkgtools 25-4
popcorntime 0.3.7.2-1
powerstat-git 20140207-1
primus-git 20150223-1
profile-cleaner 2.34-1
pulseaudio-git v5.99.2.4.ge0e0ebb-1
pyqt3 3.18.1-14
pyrit 0.4.0-2
python-efl 1.13.0-1
python2-efl 1.13.0-1
python2-liblarch 2.1.0-4
python2-pypdf2 1.24-1
qscintilla-qt3 1.7.1-6
qt3 1:3.3.8b-9
rage-git 0.1.0.r78.9bd2dfb-1
rar 5.2.1-1
ravex-colors-gtk-theme 17.2-1
redshift-git 1.9.1.r91.g59023d8-1
redshift-gtk-git 1.9.1.r91.g59023d8-1
rofi-git r449.4c92d1f-1
screenclone-git 20130120-1
shimmer-wallpapers 1.0-2
siano-tv-fw 0.1-1
simpleswitcher-git 20140219-1
skippy-xd-git 46.ecb7835-1
smartgithg 6.0.7-2
stapler 0.4-2
superswitcher 0.6-4
tango-icon-theme 0.8.90-9
teamviewer 10.0.37742-1
thunderbird-lightning-bin 3.3-1
thunderbird-theme-adwaita 31.0-1
tomboy-calc 0.40-1
ttf-faruma-ib 2.0-1
ttf-ms-fonts 2.0-10
ttf-vista-fonts 1-8
tuned 2.3.0-1
vim-ag 20140327-1
virt-what 1.14-2
wepbuster 1.0_beta_0.7-6
wepcrackgui 0.9.2-1
wingo-git 20121022-2
wps-office 9.1.0.4945_a16p3-1
wpscrack 0.0.1-2
xf86-video-intel-git 2.99.917.151.gfef0f3d-1
xfce4-xquisite-icon-theme 0.4.6-1
xpdf 3.04-2
xwinmosaic-git v0.4.2.11.g378fffb-1
xz-git 5.2.0.r8.ga9b45ba-1
zen-gtk-themes 0.14.2-1
zenx-gtk-themes 0.11.5-1
zukitwo-colors-xfwm4 0.1-1
zukitwo-hybrid-theme 20111208-1
zukitwo-manjaro 33.9693d25-1
zukitwo-themes 20141022-1 -
Getting the Xubuntu XFCE theme on Arch Linux?
I used Xubuntu on my netbook (mainly for convenience and I love the theme that comes with Xubuntu 13.04. Does anyone know if you can download it anywhere for XFCE running on Arch? Thanks.
It's just Greybird (gtk2/3 +xfwm theme) with the elementary-xfce icon theme IIRC. Search for them on the AUR.
-
Xfce4-power-manager & change icon in Xfce4 panel
Hello!
I'm trying to change the appearance for the latest xfce4-power-manager (v1.4.1-2). I use elementary Xfce icons. The former xfce4-power-manager was using the correct (simple black & white) elementary icon in the notification area in the Xfce4 panel. With the latest version, where xfce4-power-manager has to be added manually to the panel, it is using some kind of colourful icon.
Is there some way to tell the program to use the elementary icons instead? I've already tried to edit /usr/share/applications/xfce4-power-manager-settings.desktop. But no dice.
Thanks in advance.Do you know the location of both, the simple black & white icon and the colourful one?
If you do, you can try the following. Backup the original colourful one and paste a copy of the one you want to use in the same location and with the same name.
Afterwards check if the result is the one you want.
I have myself come across the situation of wanting to change an icon through the .desktop file but in the end it seems that some icons, even in this case maybe?, are hardcoded and can't be changed through a .desktop file.
More than willing for someone to proof me wrong though! -
Can't get LightDM avatar instructions to work [solved]
I must be doing something wrong with getting my avatar into LightDM. I followed the wiki (or at least i think i did). I am using the default GTK greeter with a theme from my system. Theme and greeter work fine.
Here are files I set up according to the Wiki
/var/lib/AccountsService/users/ray:
[User]
Language=en_US.utf8
XSession=xfce
Icon=/var/lib/AccountsService/icons/ray
SystemAccount=false
64x64png file:
/var/lib/AccountsService/icons/ray/ray.png
when i type `users` here is what i get:
$>users
ray ray
Last edited by originalsurfmex (2014-02-09 13:49:55)Shouldn't the icon png file be called...
/var/lib/AccountsService/icons/ray
not...
/var/lib/AccountsService/icons/ray/ray.png -
I' m trying to use the info script found on this forum, but I' ve some problem.....
This is the script:
#!/usr/bin/perl
# colors
$c1 = "\e[0;34m";
$c2 = "\e[0;36m";
$c3 = "\e[0;m";
#what values to display. Use "OS Kernel DE WM WMTheme Font Icon Theme"
$display = "OS Kernel DE WM WMTheme Theme Icon Font";
use Switch;
@wm = ("fluxbox", "openbox", "blackbox",
"xfwm", "metacity", "kwin");
@line = ();
%de = ("gnome", "gnome-session",
"xfce", "xfce",
"kde", "ksmserver");
$quite = 1; # Prints little debugging messages if set to 0;
$tryWP = 1; # trys to find your wallpaper if set to 0;
## Dont alter after this ##
my $isDE = 0;
my $version = `cat /etc/arch-release`;
my $kernel = `uname -r`;
$version =~ s/\s+/ /g;
$kernel =~ s/\s+/ /g;
$version = "$c1 OS:$c3 $version";
$kernel = "$c1 Kernel:$c3 $kernel";
if ( $display =~ "OS"){
push(@line, "$version");
if ( $display =~ "Kernel"){
push(@line, "$kernel");
parsePS(2);
$isDE == 0 && print "No DE found, not running one?..\n" unless $quite == 1;
if( $isDE == 0 ) {
if( !open(GTKRC, "<", "$ENV{HOME}/.gtkrc-2.0") ) {
print "$ENV{HOME}.gtkrc-2.0 -> $!...\n";
} else {
while( <GTKRC> ) {
if( /include "$ENV{HOME}\/\.themes\/(.+)\/gtk-(1|2)\.0\/gtkrc"/ ){
$theme = "$c1 Theme:$c3 $1";
if ( $display =~ m/Theme/ ) {
push(@line, "$theme");
if( /gtk-icon-theme-name.*=.*"(.+)"/ ) {
$icon = "$c1 Icons:$c3 $1";
if ( $display =~ m/Icon/ ) {
push(@line, "$icon");
if( /gtk-font-name.*=.*"(.+)"/ ) {
$font = "$c1 Font:$c3 $$1";
if ( $display =~ m/Font/ ) {
push(@line, "$font");
close(GTKRC);
## Processes First
parsePS(1);
## Couldn't find a WM in PS
$WM =~ /Unknown/ && print "No WM found, yours isn't on the list?...\n" unless $quite == 1;
} else {
grabDEinfo($DE);
print "
$c1 __
$c1 _=(SDGJT=_
$c1 _GTDJHGGFCVS) @line[0]
$c1 ,GTDJGGDTDFBGX0 @line[1]
$c1 JDJDIJHRORVFSBSVL$c2-=+=,_ @line[2]
$c1 IJFDUFHJNXIXCDXDSV,$c2 \"DEBL @line[3]
$c1 |LKDSDJTDU=OUSCSBFLD.$c2 '?ZWX, @line[4]
$c1 LMDSDSWH' \`?DCBOSI$c2 DRDS], @line[5]
$c1 SDDFDFH' \`0YEWD,$c2 )HDROD @line[6]
$c1 !KMDOCG &GSU|$c2\_GFHRGO' @line[7]
$c1 HKLSGP'$c2 __$c1\TKM0$c2\GHRBV)'
$c1 JSNRVW'$c2 __+MNAEC$c1\IOI,$c2\BN'
$c1 HELK['$c2 __,=OFFXCBGHC$c1\FD)
$c1 ?KGHE $c2\_-#DASDFLSV='$c1 'EF
$c1 'EHTI !H
$c1 \`0F' '!
sub parsePS {
my $x = 0;
my $y = 0;
my $found = 0;
my $psl = `ps -A | awk {'print \$4'}`;
@psl = split(/\n/, $psl);
switch (shift @_) {
case 1 {
$WM = "Unknown";
while( $x < @wm && $found == 0 ) {
while( $y < @psl ) {
print "Testing '$psl[$y]' with '$wm[$x]'\n" unless $quite == 1;
if( $psl[$y] =~ /$wm[$x]/ ) {
$WM = $wm[$x];
if ( $display =~ m/WM/ ) {
push(@line, "$c1 WM:$c3 $WM");
print "WM found as $WM\n" unless $quite == 1;
getWMtheme();
$found = 1;
last;
$y++;
$y = 0;
$x++;
$found == 1 && last;
case 2 {
$isDE = 0;
$DE = "None";
while( ($dev, $devid) = each(%de) ) {
while( $x < @psl ) {
print "Testing '$psl[$x]' with '$devid'\n" unless $quite == 1;
if( $psl[$x] =~ /$devid/ ) {
$DE = $dev;
print "DE found as $DE\n" unless $quite == 1;
$found = 1;
$isDE = 1;
if ( $display =~ m/DE/ ) {
push(@line, "$c1 DE:$c3 $DE");
last;
$x++;
$x = 0;
$found == 1 && last;
sub getWMtheme {
switch($WM) {
case "openbox" {
open(FILE, "<", "$ENV{HOME}/.config/openbox/rc.xml")
|| die("$!\nFailed to open OpenBox rc.xml...\n");
while( <FILE> ) {
if( /<name>(.+)<\/name>/ ) {
print "OB Theme found as $1\n" unless $quite == 1;
$WMTHEME = $1;
$wmtheme = "$c1 WM Theme:$c3 $WMTHEME";
if ( $display =~ m/WMTheme/ ) {
push(@line, "$wmtheme");
last;
close(FILE);
case "metacity" {
$WMTHEME = `gconftool-2 -g /apps/metacity/general/theme`;
$wmtheme = "$c1 WM Theme:$c3 $WMTHEME";
if ( $display =~ m/WMTheme/ ) {
push(@line, "$wmtheme");
case "fluxbox" {
open(FILE, "<", "$ENV{HOME}/.fluxbox/init")
|| die("$!\nFailed to open Fluxbox init file...\n");
while( <FILE> ) {
if( /session.styleFile: \/.+\/(.+)$/ ) {
print "FB Theme found as $1\n";
$WMTHEME = $1;
$wmtheme = "$c1 WM Theme:$c3 $WMTHEME";
if ( $display =~ m/WMTheme/ ) {
push(@line, "$wmtheme");
last;
close(FILE);
case "blackbox" {
open(FILE, "<", "$ENV{HOME}/.blackboxrc")
|| die("$!\nFailed to open Blackbox .blackboxrc file...\n");
while( <FILE> ) {
if( /session.styleFile: \/.+\/(.+)$/ ) {
print "BB Theme found as $1\n";
$WMTHEME = $1;
$wmtheme = "$c1 WM Theme:$c3 $WMTHEME";
if ( $display =~ m/WMTheme/ ) {
push(@line, "$wmtheme");
last;
close(FILE);
case "xfwm" {
open(FILE, "<", "$ENV{HOME}/.config/xfce4/mcs_settings/xfwm4.xml")
|| die("XFCE4 -> $!...\n");
while( <FILE> ) {
if( /<option name="Xfwm\/ThemeName" type="string" value="(.+)"\/>/ ) {
$WMTHEME = $1;
$wmtheme = "$c1 WM Theme:$c3 $WMTHEME";
if ( $display =~ m/WMTheme/ ) {
push(@line, "$wmtheme");
close(FILE);
case "kwin" {
open(FILE, "<", "$ENV{HOME}./kde/share/config/kwinrc")
|| die("\nFailed to open kwin config file \n");
while( <FILE> ) {
if( /PluginLib=(.+)/ ) {
$WMTHEME = $1;
$wmtheme = "$c1 WM Theme:$c3 $WMTHEME";
if ( $display =~ m/WMTheme/ ) {
push(@line, "$wmtheme");
close(FILE);
sub grabDEinfo {
switch(shift @_) {
case "gnome" {
parsePS(1);
if ( $display =~ m/Theme/ ) {
$THEME = `gconftool-2 -g /desktop/gnome/interface/gtk_theme`;
$theme = "$c1 Theme:$c3 $THEME";
push(@line, "$theme");
if ( $display =~ m/Icon/ ) {
$ICON = `gconftool-2 -g /desktop/gnome/interface/icon_theme`;
$icon = "$c1 Icon:$c3 $Icon";
push(@line, "$icon");
if ( $display =~ m/Font/ ) {
$FONT = `gconftool-2 -g /desktop/gnome/interface/font_name`;
$font = "$c1 Font:$c3 $FONT";
push(@line, "$font");
case "xfce" {
parsePS(1);
open(FILE, "<", "$ENV{HOME}/.config/xfce4/mcs_settings/gtk.xml")
|| die("XFCE4 GTK -> $!...\n");
while( <FILE> ) {
if( /<option name="Net\/ThemeName" type="string" value="(.+)"\/>/ ) {
$THEME = $1;
$theme = "$c1 Theme:$c3 $THEME";
if ( $display =~ m/Theme/ ) {
unshift(@xfce, "$theme");
if( /<option name="Net\/IconThemeName" type="string" value="(.+)"\/>/ ) {
$ICON = $1;
$icon = "$c1 Icon:$c3 $ICON";
if ( $display =~ m/Icon/ ) {
unshift(@xfce, "$icon");
if( /<option name="Gtk\/FontName" type="string" value="(.+)"\/>/ ) {
$FONT = $1;
$font = "$c1 Font:$c3 $FONT";
if ( $display =~ m/Font/ ) {
unshift(@xfce, "$font");
close(FILE);
foreach $i (@xfce) {
push(@line, "$i");
case "kde" {
prasePS(1);
open(FILE, "<", "$ENV{HOME}/.kde/share/config/kdeglobals")
|| die("\nFailed to open kwin config file \n");
while( <FILE> ) {
if( /Theme=(.+)/ ) {
$ICON = $1;
$icon = "$c1 Icon:$c3 $ICON";
if ( $display =~ m/Icon/ ) {
push(@line, $icon);
if( /widgetStyle(.+)/ ) {
$THEME = $1;
$theme = "$c1 Theme:$c3 $THEME";
if ( $display =~ m/Theme/ ) {
push(@line, $icon);
if( /font=(.+),.*/ ) {
$FONT = $1;
$font = "$c1 Font:$c3 $FONT";
if ( $display =~ m/Icon/ ) {
push(@line, $font);
and this is the result:
What' s wrong?dolby wrote:
no it still doesnt work. ive got a plain openbox. no gnome/xfce/kde/*
:: Finding Kernel version
:: Getting processes
:: Testing KDE process: ksmserver
:: Testing Gnome process: gnome-session
:: Testing Xfce4 process: xfce-mcs-manage
:: Testing PekWM process: pekwm
:: Testing Fluxbox process: fluxbox
:: Testing FVWM process: fvwm
:: Testing Blackbox process: blackbox
:: Testing IceWM process: icewm
:: Testing Enlightenment process: enlightenment
:: Testing Openbox process: openbox
:: WM found as Openbox
:: Finding Openbox theme
:: Openbox theme found as DarkGraph
:: Opening /home/dou/.gtkrc-2.0
:: Opening /home/dou/.gtkrc.mine
:: Icons found as Tango
:: Font found as Sans 9
:: Finding Archlinux version
_=(SDGJT=_
_GTDJHGGFCVS) OS: Arch Linux 0.8 (Voodoo)
,GTDJGGDTDFBGX0 Kernel: 2.6.20-ARCH
JDJDIJHRORVFSBSVL-=+=,_ WM: Openbox
IJFDUFHJNXIXCDXDSV, "DEBL WM Theme: DarkGraph
[LKDSDJTDU=OUSCSBFLD. '?ZWX, Icons: Tango
,LMDSDSWH' `DCBOSI DRDS], Font: Sans 9
SDDFDFH' !YEWD, )HDROD
!KMDOCG &GSU|_GFHRGO'
HKLSGP' __TKM0GHRBV)'
JSNRVW' __+MNAECIOI,BN'
HELK[' __,=OFFXCBGHCFD)
?KGHE _-#DASDFLSV=' 'EF
'EHTI !H
`0F' '!
while the one i used before (link posted above)
OS: Arch Linux 0.8 (Voodoo)
Kernel: 2.6.20-ARCH
Gtk Theme: Murrina-Black
Gtk Icons: Tango
Gtk Font: Sans 9
WM: Openbox
Openbox Theme: DarkGraph
Your arch data should perhaps have....."voodoo Arch Linux" thruout the simulation!!!!!!! -
Forward/back/refresh buttons on chromium
This is extremely trivial, but could someone help me replace the icons for the forward, back and refresh buttons in chromium? I am using the elementary Xfce icons and these look really ugly, like Internet Explorer circa 1995 or something. I would like to replace them with the ones from the chromium "classic" theme, i.e. simple arrows. But I don't want to turn on the rest of the chromium classic theme.
I can't find the relevant images among chromium's files. I am looking here in particular:
/usr/lib/chromium/resources/inspector/Images
But I don't see them...
Thanks!Actually, on second thought, I guess that would involve changing the icons in question (forward/back) for all other apps as well, and I don't really want to do that. So maybe I will just have to use a chromium theme instead...
-
Not sure about Xmonad [SOLVED]
I have had XFCE, and wanted to install Xmonad. I used this page as my main guide:
http://www.haskell.org/haskellwiki/Xmon … ad_in_XFCE
It was not totally smoothly, but in the end my old window manager was gone and I could tile windows with Xmonad. It appeared to be working fine. I still had the XFCE icons and menu bar (not 100% if this is how it should be...). However, after this was all done, I removed the option from XFCE that it should save my session (I had been using that option before, as per instructions above). Ever since I did this, I have not been able to log in properly.
The login screen comes up as normal. After logging in, I am presented with a blank desktop - just the background. I figure this _could_ be correct, given that this is how Xmonad loads in 'plain' mode, it appears, but nothing is working. That is, I can not start anything. I have tried my ALT, HOME, FN keys to see if they are my "mod" key (when I was using Xmonad successfully, the HOME key was my mod key), but I am not able to launch anything. Furthermore, every 30 seconds or so the screen 'reloads' (it goes black and then reappears 2 seconds later). I _can_ go to the terminal using CTRL+ALT+F2 (or any F), but when I am there I am 'bounced' back to my empty desktop after another 30 seconds or so. Very odd. I have tried a variety of xmonad.hs configuration files, but that does not help either.
What can this be? Is Xmonad operating, or is this the signal it is not yet loading properly?
Last edited by george55 (2011-10-24 04:49:24)An update: I found out I could learn more about the xmonad errors by simply running 'xmonad' from the terminal. I found out there was a problem with the conky configuration, which now appears to be fixed. A previous error is gone, but it now reads (when running 'xmonad'):
dzen: cannot open display
xmonad-i386-linux: user error (openDisplay)
Any idea what this could be? Is this causing the problem.
On a sidenote: when I'm in the "desktop" and hit HOME+P, it reacts slightly by 'refreshing' the background. This is the only key combination that appears to be doing _something_. -
[solved] XFCE Dual monitor causes theme & icon, xconf issues
Hey all,
Here is the issue:
I have sony svz13114gxx laptop with xfce4 DE, i just tried to hook up external vga monitor to laptop and everything configures right (no mirroring) with this run in normal session:
xrandr --output eDP1 --mode 1920x1080
xrandr --newmode "1920x1200_60.00" 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync
xrandr --addmode VGA1 1920x1200_60.00
xrandr --output VGA1 --mode 1920x1200_60.00
xrandr --output VGA1 --left-of eDP1
Obviously when i reboot this is not persistent, so then i put this stuff in my /etc/X11/xorg.conf.d/20-intel.conf:
Section "Device"
Identifier "Intel Graphics"
Driver "intel"
Option "AccelMethod" "sna"
Option "monitor-eDP1" "eDP1"
Option "monitor-VGA1" "VGA1"
EndSection
Section "Monitor"
Identifier "VGA1"
Modeline "1920x1200_60.00" 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -HSync +VSync
Option "PreferredMode" "1920x1200_60.00"
EndSection
Section "Monitor"
Identifier "eDP1"
Option "PreferredMode" "1920x1080"
Option "Primary" "true"
Option "Position" "1920 0"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Intel Graphics"
Monitor "eDP1"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1920x1080"
EndSubSection
EndSection
This is where the problems start. On reboot Slim desktop manager seems to be stretched properly across the two monitors, but the I login and the display switches back to being mirrored, my xfce gtk2 theme is disabled in favor of somee default looking one, my icons are back to default, and none of my custom keyboard shorcuts work.
I can then use xrandr to get the displays in extended mode again, but the themes and icons etc do not revert. And on reboot, i have the same issue.
I have tried the sourcing ~/.xprofile, ~/.xinitrc, and ~/.config.xfce4/xinitrc routes, putting the xrandr cammands above the exec lines and that doesn't even enable VGA1.
I have been to all these places
https://wiki.ubuntu.com/X/Config/Resolution#Xrandr_Graphical_Front_End_GUI
http://ilkinbalkanay.blogspot.com/2008/01/extended-desktop-configuration-with.html
https://bbs.archlinux.org/viewtopic.php?id=98747
https://www.google.com/search?q=arch%20xrandr&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a&source=hp&channel=np
https://wiki.archlinux.org/index.php/Execute_commands_after_X_start
http://intellinuxgraphics.org/dualhead.html
http://mac.linux.be/content/setting-xorgconf-manually-xrandr#3
https://www.google.com/search?q=arch%20dual%20monitors%20The%20last%20active%20output%20must%20not%20be%20disabled%2C%20the%20system%20would%20be%20unusable.&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a&source=hp&channel=np#hl=en&safe=off&client=firefox-a&tbo=d&rls=org.mozilla:en-US%3Aofficial&channel=np&sclient=psy-ab&q=xfce+%22Selected+output+not+disabled%22&oq=xfce+%22Selected+output+not+disabled%22&gs_l=serp.3...1694.1694.3.2205.1.1.0.0.0.0.97.97.1.1.0.les%3Bcrnk_timediscounta..0.0...1c.1.O4EDj7DaWlA&pbx=1&fp=1&bpcl=39468505&biw=984&bih=936&cad=b&sei=aKC_UIKvJ6GA0AGTg4HwBg&sei=FKS_UMuwJdPU0gHorICQBA&bav=on.2,or.r_gc.r_pw.r_qf.&sei=2MK_UOaAJ5Ph0wGbsoHICg
https://wiki.archlinux.org/index.php/Xfce#Customizing_Startup_Applications
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/x-config.html
https://wiki.archlinux.org/index.php/Xorg#Monitor_settings
Even after much research, still no luck.
this might be useful:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=631225
Anyone have any ideas?
here is my Xorg0.log
[ 3.490]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[ 3.490] X Protocol Version 11, Revision 0
[ 3.490] Build Operating System: Linux 3.6.3-1-ARCH x86_64
[ 3.490] Current Operating System: Linux tcz 3.6.8-1-ARCH #1 SMP PREEMPT Mon Nov 26 22:10:40 CET 2012 x86_64
[ 3.490] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=d23251af-35fa-426b-a7d5-5aa2f0a5b87d ro quiet pcie_aspm=force i915.i915_enable_rc6=1
[ 3.490] Build Date: 08 November 2012 07:09:29PM
[ 3.490]
[ 3.490] Current version of pixman: 0.28.0
[ 3.490] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 3.490] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 3.490] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Dec 5 16:25:21 2012
[ 3.492] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 3.494] (==) No Layout section. Using the first Screen section.
[ 3.494] (**) |-->Screen "Default Screen" (0)
[ 3.494] (**) | |-->Monitor "eDP1"
[ 3.494] (**) | |-->Device "Intel Graphics"
[ 3.494] (==) Automatically adding devices
[ 3.494] (==) Automatically enabling devices
[ 3.494] (==) Automatically adding GPU devices
[ 3.504] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 3.504] Entry deleted from font path.
[ 3.504] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 3.504] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 3.504] Entry deleted from font path.
[ 3.504] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 3.504] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 3.504] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 3.504] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 3.504] (II) Loader magic: 0x7fcc40
[ 3.504] (II) Module ABI versions:
[ 3.504] X.Org ANSI C Emulation: 0.4
[ 3.504] X.Org Video Driver: 13.1
[ 3.504] X.Org XInput driver : 18.0
[ 3.504] X.Org Server Extension : 7.0
[ 3.505] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 6.276] (--) PCI:*(0:0:2:0) 8086:0166:104d:90a5 rev 9, Mem @ 0xd7000000/4194304, 0xc0000000/268435456, I/O @ 0x00009000/64
[ 6.276] (II) Open ACPI successful (/var/run/acpid.socket)
[ 6.276] Initializing built-in extension Generic Event Extension
[ 6.276] Initializing built-in extension SHAPE
[ 6.276] Initializing built-in extension MIT-SHM
[ 6.276] Initializing built-in extension XInputExtension
[ 6.276] Initializing built-in extension XTEST
[ 6.276] Initializing built-in extension BIG-REQUESTS
[ 6.276] Initializing built-in extension SYNC
[ 6.276] Initializing built-in extension XKEYBOARD
[ 6.276] Initializing built-in extension XC-MISC
[ 6.276] Initializing built-in extension SECURITY
[ 6.276] Initializing built-in extension XINERAMA
[ 6.276] Initializing built-in extension XFIXES
[ 6.276] Initializing built-in extension RENDER
[ 6.276] Initializing built-in extension RANDR
[ 6.276] Initializing built-in extension COMPOSITE
[ 6.276] Initializing built-in extension DAMAGE
[ 6.276] Initializing built-in extension MIT-SCREEN-SAVER
[ 6.276] Initializing built-in extension DOUBLE-BUFFER
[ 6.276] Initializing built-in extension RECORD
[ 6.276] Initializing built-in extension DPMS
[ 6.276] Initializing built-in extension X-Resource
[ 6.276] Initializing built-in extension XVideo
[ 6.276] Initializing built-in extension XVideo-MotionCompensation
[ 6.276] Initializing built-in extension XFree86-VidModeExtension
[ 6.276] Initializing built-in extension XFree86-DGA
[ 6.276] Initializing built-in extension XFree86-DRI
[ 6.276] Initializing built-in extension DRI2
[ 6.276] (II) LoadModule: "glx"
[ 6.278] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 6.281] (II) Module glx: vendor="X.Org Foundation"
[ 6.281] compiled for 1.13.0, module version = 1.0.0
[ 6.281] ABI class: X.Org Server Extension, version 7.0
[ 6.281] (==) AIGLX enabled
[ 6.281] Loading extension GLX
[ 6.281] (II) LoadModule: "intel"
[ 6.281] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 6.285] (II) Module intel: vendor="X.Org Foundation"
[ 6.285] compiled for 1.13.0.901, module version = 2.20.14
[ 6.285] Module class: X.Org Video Driver
[ 6.285] ABI class: X.Org Video Driver, version 13.1
[ 6.285] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
ValleyView PO board
[ 6.286] (++) using VT number 7
[ 6.288] (II) intel(0): using device path '/dev/dri/card0'
[ 6.288] (**) intel(0): Depth 24, (--) framebuffer bpp 32
[ 6.288] (==) intel(0): RGB weight 888
[ 6.288] (==) intel(0): Default visual is TrueColor
[ 6.288] (**) intel(0): Option "AccelMethod" "sna"
[ 6.288] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
[ 6.289] (**) intel(0): Framebuffer tiled
[ 6.289] (**) intel(0): Pixmaps tiled
[ 6.289] (**) intel(0): 3D buffers tiled
[ 6.289] (**) intel(0): Throttling enabled
[ 6.289] (**) intel(0): Delayed flush enabled
[ 6.289] (**) intel(0): "Tear free" disabled
[ 6.289] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 6.289] (II) intel(0): Output eDP1 using monitor section eDP1
[ 6.289] (**) intel(0): Option "PreferredMode" "1920x1080"
[ 6.289] (**) intel(0): Option "Position" "1920 0"
[ 6.289] (**) intel(0): Option "Primary" "true"
[ 6.289] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
[ 6.293] (II) intel(0): Output VGA1 using monitor section VGA1
[ 6.293] (**) intel(0): Option "PreferredMode" "1920x1200_60.00"
[ 6.294] (II) intel(0): Output HDMI1 has no monitor section
[ 6.336] (II) intel(0): Output DP1 has no monitor section
[ 6.337] (II) intel(0): EDID for output eDP1
[ 6.337] (II) intel(0): Manufacturer: MS_ Model: 25 Serial#: 16843009
[ 6.337] (II) intel(0): Year: 2012 Week: 24
[ 6.337] (II) intel(0): EDID Version: 1.4
[ 6.337] (II) intel(0): Digital Display Input
[ 6.337] (II) intel(0): 8 bits per channel
[ 6.337] (II) intel(0): Digital interface is DisplayPort
[ 6.337] (II) intel(0): Max Image Size [cm]: horiz.: 29 vert.: 16
[ 6.337] (II) intel(0): Gamma: 2.20
[ 6.337] (II) intel(0): No DPMS capabilities specified
[ 6.337] (II) intel(0): Supported color encodings: RGB 4:4:4
[ 6.337] (II) intel(0): First detailed timing is preferred mode
[ 6.337] (II) intel(0): Preferred mode is native pixel format and refresh rate
[ 6.337] (II) intel(0): redX: 0.602 redY: 0.336 greenX: 0.296 greenY: 0.546
[ 6.337] (II) intel(0): blueX: 0.148 blueY: 0.126 whiteX: 0.313 whiteY: 0.329
[ 6.337] (II) intel(0): Manufacturer's mask: 0
[ 6.337] (II) intel(0): Supported standard timings:
[ 6.337] (II) intel(0): #0: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 6.337] (II) intel(0): Supported detailed timing:
[ 6.337] (II) intel(0): clock: 162.8 MHz Image Size: 291 x 164 mm
[ 6.337] (II) intel(0): h_active: 1920 h_sync: 1952 h_sync_end 1984 h_blank_end 2481 h_border: 0
[ 6.337] (II) intel(0): v_active: 1080 v_sync: 1083 v_sync_end 1086 v_blanking: 1095 v_border: 0
[ 6.337] (II) intel(0): Supported detailed timing:
[ 6.337] (II) intel(0): clock: 99.9 MHz Image Size: 291 x 164 mm
[ 6.337] (II) intel(0): h_active: 1920 h_sync: 1952 h_sync_end 1984 h_blank_end 2281 h_border: 0
[ 6.337] (II) intel(0): v_active: 1080 v_sync: 1083 v_sync_end 1086 v_blanking: 1095 v_border: 0
[ 6.337] (II) intel(0): Monitor name: Sony LCD
[ 6.337] (II) intel(0): Ranges: V min: 39 V max: 61 Hz, H min: 43 H max: 66 kHz, PixClock max 175 MHz
[ 6.337] (II) intel(0): EDID (in hex):
[ 6.337] (II) intel(0): 00ffffffffffff00367f250001010101
[ 6.337] (II) intel(0): 18160104a51d1078020f159a564b8b26
[ 6.337] (II) intel(0): 205054000000d1c00101010101010101
[ 6.337] (II) intel(0): 0101010101019c3f803172380f402020
[ 6.337] (II) intel(0): 330023a4100000180727806971380f40
[ 6.337] (II) intel(0): 2020330023a410000018000000fc0053
[ 6.337] (II) intel(0): 6f6e79204c43440a20202020000000fd
[ 6.337] (II) intel(0): 00273d2b4211000a2020202020200013
[ 6.337] (II) intel(0): EDID vendor "MS_", prod id 37
[ 6.337] (II) intel(0): Using EDID range info for horizontal sync
[ 6.337] (II) intel(0): Using EDID range info for vertical refresh
[ 6.337] (II) intel(0): Printing DDC gathered Modelines:
[ 6.337] (II) intel(0): Modeline "1920x1080"x0.0 162.84 1920 1952 1984 2481 1080 1083 1086 1095 -hsync -vsync (65.6 kHz eP)
[ 6.337] (II) intel(0): Modeline "1920x1080"x0.0 99.91 1920 1952 1984 2281 1080 1083 1086 1095 -hsync -vsync (43.8 kHz e)
[ 6.337] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 6.337] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 6.337] (II) intel(0): Printing probed modes for output eDP1
[ 6.337] (II) intel(0): Modeline "1920x1080"x59.9 162.84 1920 1952 1984 2481 1080 1083 1086 1095 -hsync -vsync (65.6 kHz UeP)
[ 6.337] (II) intel(0): Modeline "1920x1080"x40.0 99.91 1920 1952 1984 2281 1080 1083 1086 1095 -hsync -vsync (43.8 kHz e)
[ 6.338] (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 6.338] (II) intel(0): Modeline "1680x945"x60.0 131.48 1680 1784 1960 2240 945 946 949 978 -hsync +vsync (58.7 kHz)
[ 6.338] (II) intel(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 6.338] (II) intel(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 6.338] (II) intel(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
[ 6.338] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 6.338] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 6.338] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 6.338] (II) intel(0): Modeline "1366x768"x60.0 85.89 1366 1439 1583 1800 768 769 772 795 -hsync +vsync (47.7 kHz)
[ 6.338] (II) intel(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 6.338] (II) intel(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e)
[ 6.338] (II) intel(0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e)
[ 6.338] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 6.338] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 6.338] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 6.338] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 6.343] (II) intel(0): EDID for output VGA1
[ 6.343] (II) intel(0): Printing probed modes for output VGA1
[ 6.343] (II) intel(0): Modeline "1920x1200_60.00"x59.9 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz UP)
[ 6.343] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 6.344] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 6.344] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 6.344] (II) intel(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 6.344] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 6.344] (II) intel(0): EDID for output HDMI1
[ 6.386] (II) intel(0): EDID for output DP1
[ 6.386] (II) intel(0): Output eDP1 connected
[ 6.386] (II) intel(0): Output VGA1 connected
[ 6.386] (II) intel(0): Output HDMI1 disconnected
[ 6.386] (II) intel(0): Output DP1 disconnected
[ 6.386] (II) intel(0): Using user preference for initial modes
[ 6.386] (II) intel(0): Output eDP1 using initial mode 1920x1080
[ 6.386] (II) intel(0): Output VGA1 using initial mode 1920x1200_60.00
[ 6.386] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 6.386] (**) intel(0): Display dimensions: (290, 160) mm
[ 6.386] (**) intel(0): DPI set to (336, 190)
[ 6.386] (II) Loading sub module "dri2"
[ 6.386] (II) LoadModule: "dri2"
[ 6.387] (II) Module "dri2" already built-in
[ 6.387] (==) Depth 24 pixmap format is 32 bpp
[ 6.387] (II) intel(0): SNA initialized with IvyBridge backend
[ 6.387] (==) intel(0): Backing store disabled
[ 6.387] (==) intel(0): Silken mouse enabled
[ 6.387] (II) intel(0): HW Cursor enabled
[ 6.387] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 6.388] (==) intel(0): DPMS enabled
[ 6.388] (II) intel(0): [DRI2] Setup complete
[ 6.388] (II) intel(0): [DRI2] DRI driver: i965
[ 6.388] (II) intel(0): direct rendering: DRI2 Enabled
[ 6.388] (WW) intel(0): Option "PreferredMode" is not used
[ 6.388] (WW) intel(0): Option "Primary" is not used
[ 6.388] (WW) intel(0): Option "Position" is not used
[ 6.388] (==) intel(0): hotplug detection: "enabled"
[ 6.388] (--) RandR disabled
[ 6.410] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 6.410] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 6.410] (II) AIGLX: enabled GLX_ARB_create_context
[ 6.410] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 6.410] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 6.410] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 6.410] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 6.410] (II) AIGLX: Loaded and initialized i965
[ 6.410] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 6.411] (II) intel(0): switch to mode 1920x1080 on crtc 3 (pipe 0)
[ 6.500] (II) intel(0): switch to mode 1920x1200 on crtc 5 (pipe 1)
[ 6.663] (II) intel(0): Setting screen physical size to 1016 x 317
[ 6.703] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[ 6.703] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 6.703] (II) LoadModule: "evdev"
[ 6.704] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 6.706] (II) Module evdev: vendor="X.Org Foundation"
[ 6.706] compiled for 1.13.0, module version = 2.7.3
[ 6.706] Module class: X.Org XInput Driver
[ 6.706] ABI class: X.Org XInput driver, version 18.0
[ 6.706] (II) Using input driver 'evdev' for 'Video Bus'
[ 6.706] (**) Video Bus: always reports core events
[ 6.706] (**) evdev: Video Bus: Device: "/dev/input/event10"
[ 6.706] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 6.706] (--) evdev: Video Bus: Found keys
[ 6.706] (II) evdev: Video Bus: Configuring as keyboard
[ 6.706] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:09/input/input10/event10"
[ 6.706] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[ 6.706] (**) Option "xkb_rules" "evdev"
[ 6.706] (**) Option "xkb_model" "evdev"
[ 6.706] (**) Option "xkb_layout" "us"
[ 6.732] (II) config/udev: Adding input device Sony Vaio Keys (/dev/input/event3)
[ 6.732] (**) Sony Vaio Keys: Applying InputClass "evdev keyboard catchall"
[ 6.732] (II) Using input driver 'evdev' for 'Sony Vaio Keys'
[ 6.732] (**) Sony Vaio Keys: always reports core events
[ 6.732] (**) evdev: Sony Vaio Keys: Device: "/dev/input/event3"
[ 6.732] (--) evdev: Sony Vaio Keys: Vendor 0x104d Product 0
[ 6.732] (--) evdev: Sony Vaio Keys: Found keys
[ 6.732] (II) evdev: Sony Vaio Keys: Configuring as keyboard
[ 6.732] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/SNY5001:00/input/input3/event3"
[ 6.732] (II) XINPUT: Adding extended input device "Sony Vaio Keys" (type: KEYBOARD, id 7)
[ 6.732] (**) Option "xkb_rules" "evdev"
[ 6.732] (**) Option "xkb_model" "evdev"
[ 6.732] (**) Option "xkb_layout" "us"
[ 6.732] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/event4)
[ 6.732] (II) No input driver specified, ignoring this device.
[ 6.732] (II) This device may have been added with another device file.
[ 6.733] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/mouse0)
[ 6.733] (II) No input driver specified, ignoring this device.
[ 6.733] (II) This device may have been added with another device file.
[ 6.733] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 6.733] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 6.733] (II) Using input driver 'evdev' for 'Power Button'
[ 6.733] (**) Power Button: always reports core events
[ 6.733] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 6.733] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 6.733] (--) evdev: Power Button: Found keys
[ 6.733] (II) evdev: Power Button: Configuring as keyboard
[ 6.733] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 6.733] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 6.733] (**) Option "xkb_rules" "evdev"
[ 6.733] (**) Option "xkb_model" "evdev"
[ 6.733] (**) Option "xkb_layout" "us"
[ 6.733] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 6.733] (II) No input driver specified, ignoring this device.
[ 6.733] (II) This device may have been added with another device file.
[ 6.733] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 6.734] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[ 6.734] (II) No input driver specified, ignoring this device.
[ 6.734] (II) This device may have been added with another device file.
[ 6.734] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event7)
[ 6.734] (II) No input driver specified, ignoring this device.
[ 6.734] (II) This device may have been added with another device file.
[ 6.735] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event8)
[ 6.735] (II) No input driver specified, ignoring this device.
[ 6.735] (II) This device may have been added with another device file.
[ 6.735] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 6.735] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 6.735] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 6.735] (**) AT Translated Set 2 keyboard: always reports core events
[ 6.735] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 6.735] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 6.735] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 6.735] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 6.735] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 6.735] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 6.735] (**) Option "xkb_rules" "evdev"
[ 6.735] (**) Option "xkb_model" "evdev"
[ 6.735] (**) Option "xkb_layout" "us"
[ 6.736] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
[ 6.736] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 6.736] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 6.736] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 6.736] (II) LoadModule: "synaptics"
[ 6.737] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 6.738] (II) Module synaptics: vendor="X.Org Foundation"
[ 6.738] compiled for 1.13.0, module version = 1.6.2
[ 6.738] Module class: X.Org XInput Driver
[ 6.738] ABI class: X.Org XInput driver, version 18.0
[ 6.738] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 6.738] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 6.738] (**) Option "Device" "/dev/input/event9"
[ 6.740] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[ 6.740] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5768
[ 6.740] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4758
[ 6.740] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 6.740] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 6.740] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[ 6.740] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 6.740] (**) Option "FingerLow" "35"
[ 6.740] (**) Option "FingerHigh" "45"
[ 6.740] (**) Option "ClickPad" "true"
[ 6.740] (**) Option "EmulateMidButtonTime" "0"
[ 6.740] (**) Option "HorizTwoFingerScroll" "on"
[ 6.740] (**) Option "TapButton1" "1"
[ 6.740] (**) Option "TapButton2" "2"
[ 6.740] (**) Option "TapButton3" "3"
[ 6.740] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 6.740] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 6.740] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 6.740] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
[ 6.740] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 10)
[ 6.741] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 6.741] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 6.741] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.037
[ 6.741] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 6.741] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 6.741] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 6.741] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 6.741] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 6.742] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 6.742] (II) No input driver specified, ignoring this device.
[ 6.742] (II) This device may have been added with another device file.
[ 6.742] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 6.742] (II) No input driver specified, ignoring this device.
[ 6.742] (II) This device may have been added with another device file.
[ 6.747] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0 21764432
[ 6.747] xf86: remove device 0 /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[ 6.747] failed to find screen to remove
[ 6.747] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 6.747] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-eDP-1 0
[ 6.747] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-VGA-1 0
[ 6.747] (II) config/udev: removing device Video Bus
[ 6.773] (II) evdev: Video Bus: Close
[ 6.773] (II) UnloadModule: "evdev"
[ 6.773] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[ 6.773] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 6.773] (II) Using input driver 'evdev' for 'Video Bus'
[ 6.773] (**) Video Bus: always reports core events
[ 6.773] (**) evdev: Video Bus: Device: "/dev/input/event10"
[ 6.773] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 6.773] (--) evdev: Video Bus: Found keys
[ 6.773] (II) evdev: Video Bus: Configuring as keyboard
[ 6.773] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:09/input/input10/event10"
[ 6.773] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[ 6.773] (**) Option "xkb_rules" "evdev"
[ 6.773] (**) Option "xkb_model" "evdev"
[ 6.773] (**) Option "xkb_layout" "us"
[ 6.774] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-HDMI-A-1 0
[ 6.774] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-DP-1 0
[ 7.569] (II) config/udev: Adding input device USB2.0 Camera (/dev/input/event11)
[ 7.569] (**) USB2.0 Camera: Applying InputClass "evdev keyboard catchall"
[ 7.569] (II) Using input driver 'evdev' for 'USB2.0 Camera'
[ 7.569] (**) USB2.0 Camera: always reports core events
[ 7.569] (**) evdev: USB2.0 Camera: Device: "/dev/input/event11"
[ 7.569] (--) evdev: USB2.0 Camera: Vendor 0x5ca Product 0x18c6
[ 7.569] (--) evdev: USB2.0 Camera: Found keys
[ 7.569] (II) evdev: USB2.0 Camera: Configuring as keyboard
[ 7.569] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input11/event11"
[ 7.569] (II) XINPUT: Adding extended input device "USB2.0 Camera" (type: KEYBOARD, id 11)
[ 7.569] (**) Option "xkb_rules" "evdev"
[ 7.569] (**) Option "xkb_model" "evdev"
[ 7.569] (**) Option "xkb_layout" "us"
[ 24.939] (II) intel(0): EDID vendor "MS_", prod id 37
[ 24.939] (II) intel(0): Using hsync ranges from config file
[ 24.939] (II) intel(0): Using vrefresh ranges from config file
[ 24.939] (II) intel(0): Printing DDC gathered Modelines:
[ 24.939] (II) intel(0): Modeline "1920x1080"x0.0 162.84 1920 1952 1984 2481 1080 1083 1086 1095 -hsync -vsync (65.6 kHz eP)
[ 24.939] (II) intel(0): Modeline "1920x1080"x0.0 99.91 1920 1952 1984 2281 1080 1083 1086 1095 -hsync -vsync (43.8 kHz e)
[ 24.939] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 24.989] (II) intel(0): switch to mode 1920x1080 on crtc 3 (pipe 0)
[ 25.055] (II) intel(0): EDID vendor "MS_", prod id 37
[ 25.055] (II) intel(0): Using hsync ranges from config file
[ 25.055] (II) intel(0): Using vrefresh ranges from config file
[ 25.055] (II) intel(0): Printing DDC gathered Modelines:
[ 25.055] (II) intel(0): Modeline "1920x1080"x0.0 162.84 1920 1952 1984 2481 1080 1083 1086 1095 -hsync -vsync (65.6 kHz eP)
[ 25.055] (II) intel(0): Modeline "1920x1080"x0.0 99.91 1920 1952 1984 2281 1080 1083 1086 1095 -hsync -vsync (43.8 kHz e)
[ 25.055] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 25.150] (II) intel(0): EDID vendor "MS_", prod id 37
[ 25.150] (II) intel(0): Using hsync ranges from config file
[ 25.150] (II) intel(0): Using vrefresh ranges from config file
[ 25.150] (II) intel(0): Printing DDC gathered Modelines:
[ 25.150] (II) intel(0): Modeline "1920x1080"x0.0 162.84 1920 1952 1984 2481 1080 1083 1086 1095 -hsync -vsync (65.6 kHz eP)
[ 25.150] (II) intel(0): Modeline "1920x1080"x0.0 99.91 1920 1952 1984 2281 1080 1083 1086 1095 -hsync -vsync (43.8 kHz e)
[ 25.150] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 25.274] (II) intel(0): EDID vendor "MS_", prod id 37
[ 25.274] (II) intel(0): Using hsync ranges from config file
[ 25.274] (II) intel(0): Using vrefresh ranges from config file
[ 25.274] (II) intel(0): Printing DDC gathered Modelines:
[ 25.274] (II) intel(0): Modeline "1920x1080"x0.0 162.84 1920 1952 1984 2481 1080 1083 1086 1095 -hsync -vsync (65.6 kHz eP)
[ 25.274] (II) intel(0): Modeline "1920x1080"x0.0 99.91 1920 1952 1984 2281 1080 1083 1086 1095 -hsync -vsync (43.8 kHz e)
[ 25.274] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 25.387] (II) intel(0): EDID vendor "MS_", prod id 37
[ 25.387] (II) intel(0): Using hsync ranges from config file
[ 25.387] (II) intel(0): Using vrefresh ranges from config file
[ 25.387] (II) intel(0): Printing DDC gathered Modelines:
[ 25.387] (II) intel(0): Modeline "1920x1080"x0.0 162.84 1920 1952 1984 2481 1080 1083 1086 1095 -hsync -vsync (65.6 kHz eP)
[ 25.387] (II) intel(0): Modeline "1920x1080"x0.0 99.91 1920 1952 1984 2281 1080 1083 1086 1095 -hsync -vsync (43.8 kHz e)
[ 25.387] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 25.518] (II) intel(0): EDID vendor "MS_", prod id 37
[ 25.518] (II) intel(0): Using hsync ranges from config file
[ 25.518] (II) intel(0): Using vrefresh ranges from config file
[ 25.518] (II) intel(0): Printing DDC gathered Modelines:
[ 25.518] (II) intel(0): Modeline "1920x1080"x0.0 162.84 1920 1952 1984 2481 1080 1083 1086 1095 -hsync -vsync (65.6 kHz eP)
[ 25.518] (II) intel(0): Modeline "1920x1080"x0.0 99.91 1920 1952 1984 2281 1080 1083 1086 1095 -hsync -vsync (43.8 kHz e)
[ 25.518] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 25.676] (II) intel(0): EDID vendor "MS_", prod id 37
[ 25.676] (II) intel(0): Using hsync ranges from config file
[ 25.676] (II) intel(0): Using vrefresh ranges from config file
[ 25.676] (II) intel(0): Printing DDC gathered Modelines:
[ 25.676] (II) intel(0): Modeline "1920x1080"x0.0 162.84 1920 1952 1984 2481 1080 1083 1086 1095 -hsync -vsync (65.6 kHz eP)
[ 25.676] (II) intel(0): Modeline "1920x1080"x0.0 99.91 1920 1952 1984 2281 1080 1083 1086 1095 -hsync -vsync (43.8 kHz e)
[ 25.676] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 29.373] (II) config/udev: Adding input device Bluetooth Laser Travel Mouse (/dev/input/mouse2)
[ 29.373] (II) No input driver specified, ignoring this device.
[ 29.373] (II) This device may have been added with another device file.
[ 29.373] (II) config/udev: Adding input device Bluetooth Laser Travel Mouse (/dev/input/event12)
[ 29.373] (**) Bluetooth Laser Travel Mouse: Applying InputClass "evdev pointer catchall"
[ 29.373] (II) Using input driver 'evdev' for 'Bluetooth Laser Travel Mouse'
[ 29.373] (**) Bluetooth Laser Travel Mouse: always reports core events
[ 29.373] (**) evdev: Bluetooth Laser Travel Mouse: Device: "/dev/input/event12"
[ 29.373] (--) evdev: Bluetooth Laser Travel Mouse: Vendor 0x46d Product 0xb008
[ 29.373] (--) evdev: Bluetooth Laser Travel Mouse: Found 12 mouse buttons
[ 29.373] (--) evdev: Bluetooth Laser Travel Mouse: Found scroll wheel(s)
[ 29.373] (--) evdev: Bluetooth Laser Travel Mouse: Found relative axes
[ 29.373] (--) evdev: Bluetooth Laser Travel Mouse: Found x and y relative axes
[ 29.374] (II) evdev: Bluetooth Laser Travel Mouse: Configuring as mouse
[ 29.374] (II) evdev: Bluetooth Laser Travel Mouse: Adding scrollwheel support
[ 29.374] (**) evdev: Bluetooth Laser Travel Mouse: YAxisMapping: buttons 4 and 5
[ 29.374] (**) evdev: Bluetooth Laser Travel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 29.374] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/bluetooth/hci0/hci0:33/input12/event12"
[ 29.374] (II) XINPUT: Adding extended input device "Bluetooth Laser Travel Mouse" (type: MOUSE, id 12)
[ 29.374] (II) evdev: Bluetooth Laser Travel Mouse: initialized for relative axes.
[ 29.374] (**) Bluetooth Laser Travel Mouse: (accel) keeping acceleration scheme 1
[ 29.374] (**) Bluetooth Laser Travel Mouse: (accel) acceleration profile 0
[ 29.374] (**) Bluetooth Laser Travel Mouse: (accel) acceleration factor: 2.000
[ 29.374] (**) Bluetooth Laser Travel Mouse: (accel) acceleration threshold: 4
[ 589.381] (II) intel(0): EDID vendor "MS_", prod id 37
[ 589.381] (II) intel(0): Using hsync ranges from config file
[ 589.381] (II) intel(0): Using vrefresh ranges from config file
[ 589.381] (II) intel(0): Printing DDC gathered Modelines:
[ 589.381] (II) intel(0): Modeline "1920x1080"x0.0 162.84 1920 1952 1984 2481 1080 1083 1086 1095 -hsync -vsync (65.6 kHz eP)
[ 589.381] (II) intel(0): Modeline "1920x1080"x0.0 99.91 1920 1952 1984 2281 1080 1083 1086 1095 -hsync -vsync (43.8 kHz e)
[ 589.381] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 589.433] (II) intel(0): switch to mode 1920x1080 on crtc 3 (pipe 0)
[ 1442.644] (II) intel(0): EDID vendor "MS_", prod id 37
[ 1442.644] (II) intel(0): Using hsync ranges from config file
[ 1442.644] (II) intel(0): Using vrefresh ranges from config file
[ 1442.644] (II) intel(0): Printing DDC gathered Modelines:
[ 1442.644]Hey all,
Here is the issue:
I have sony svz13114gxx laptop with xfce4 DE, i just tried to hook up external vga monitor to laptop and everything configures right with this run in normal session:
[code]
xrandr --output eDP1 --mode 1920x1080
xrandr --newmode "1920x1200_60.00" 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync
xrandr --addmode VGA1 1920x1200_60.00
xrandr --output VGA1 --mode 1920x1200_60.00
xrandr --output VGA1 --left-of eDP1
[/code]
Obviously when i reboot this is not persistent, so then i put this stuff in my /etc/X11/xorg.conf.d/20-intel.conf:
[code]
Section "Device"
Identifier "Intel Graphics"
Driver "intel"
Option "AccelMethod" "sna"
Option "monitor-eDP1" "eDP1"
Option "monitor-VGA1" "VGA1"
EndSection
Section "Monitor"
Identifier "VGA1"
Modeline "1920x1200_60.00" 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -HSync +VSync
Option "PreferredMode" "1920x1200_60.00"
EndSection
Section "Monitor"
Identifier "eDP1"
Option "PreferredMode" "1920x1080"
Option "Primary" "true"
Option "Position" "1920 0"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Intel Graphics"
Monitor "eDP1"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1920x1080"
EndSubSection
EndSection[/code]
This is where the problems start. On reboot Slim desktop manager seems to be stretched properly across the two monitors, but the I login and the display switches back to being mirrored, my xfce gtk2 theme is disabled in favor of somee default looking one, my icons are back to default, and none of my custom keyboard shorcuts work.
I can then use xrandr to get the displays in extended mode again, but the themes and icons etc do not revert. And on reboot, i have the same issue.
I have tried the sourcing ~/.xprofile, ~/.xinitrc, and ~/.config.xfce4/xinitrc routes, putting the xrandr cammands above the exec lines and that doesn't even enable VGA1.
I have been to all these places
[code]
https://wiki.ubuntu.com/X/Config/Resolution#Xrandr_Graphical_Front_End_GUI
http://ilkinbalkanay.blogspot.com/2008/01/extended-desktop-configuration-with.html
https://bbs.archlinux.org/viewtopic.php?id=98747
https://www.google.com/search?q=arch%20xrandr&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a&source=hp&channel=np
https://wiki.archlinux.org/index.php/Execute_commands_after_X_start
http://intellinuxgraphics.org/dualhead.html
http://mac.linux.be/content/setting-xorgconf-manually-xrandr#3
https://www.google.com/search?q=arch%20dual%20monitors%20The%20last%20active%20output%20must%20not%20be%20disabled%2C%20the%20system%20would%20be%20unusable.&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a&source=hp&channel=np#hl=en&safe=off&client=firefox-a&tbo=d&rls=org.mozilla:en-US%3Aofficial&channel=np&sclient=psy-ab&q=xfce+%22Selected+output+not+disabled%22&oq=xfce+%22Selected+output+not+disabled%22&gs_l=serp.3...1694.1694.3.2205.1.1.0.0.0.0.97.97.1.1.0.les%3Bcrnk_timediscounta..0.0...1c.1.O4EDj7DaWlA&pbx=1&fp=1&bpcl=39468505&biw=984&bih=936&cad=b&sei=aKC_UIKvJ6GA0AGTg4HwBg&sei=FKS_UMuwJdPU0gHorICQBA&bav=on.2,or.r_gc.r_pw.r_qf.&sei=2MK_UOaAJ5Ph0wGbsoHICg
https://wiki.archlinux.org/index.php/Xfce#Customizing_Startup_Applications
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/x-config.html
https://wiki.archlinux.org/index.php/Xorg#Monitor_settings
[/code]
Even after much research, still no luck.
this might be useful:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=631225
Anyone have any ideas?
here is my Xorg0.log
[code]
[ 3.490]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[ 3.490] X Protocol Version 11, Revision 0
[ 3.490] Build Operating System: Linux 3.6.3-1-ARCH x86_64
[ 3.490] Current Operating System: Linux tcz 3.6.8-1-ARCH #1 SMP PREEMPT Mon Nov 26 22:10:40 CET 2012 x86_64
[ 3.490] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=d23251af-35fa-426b-a7d5-5aa2f0a5b87d ro quiet pcie_aspm=force i915.i915_enable_rc6=1
[ 3.490] Build Date: 08 November 2012 07:09:29PM
[ 3.490]
[ 3.490] Current version of pixman: 0.28.0
[ 3.490] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 3.490] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 3.490] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Dec 5 16:25:21 2012
[ 3.492] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 3.494] (==) No Layout section. Using the first Screen section.
[ 3.494] (**) |-->Screen "Default Screen" (0)
[ 3.494] (**) | |-->Monitor "eDP1"
[ 3.494] (**) | |-->Device "Intel Graphics"
[ 3.494] (==) Automatically adding devices
[ 3.494] (==) Automatically enabling devices
[ 3.494] (==) Automatically adding GPU devices
[ 3.504] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 3.504] Entry deleted from font path.
[ 3.504] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 3.504] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 3.504] Entry deleted from font path.
[ 3.504] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 3.504] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 3.504] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 3.504] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 3.504] (II) Loader magic: 0x7fcc40
[ 3.504] (II) Module ABI versions:
[ 3.504] X.Org ANSI C Emulation: 0.4
[ 3.504] X.Org Video Driver: 13.1
[ 3.504] X.Org XInput driver : 18.0
[ 3.504] X.Org Server Extension : 7.0
[ 3.505] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 6.276] (--) PCI:*(0:0:2:0) 8086:0166:104d:90a5 rev 9, Mem @ 0xd7000000/4194304, 0xc0000000/268435456, I/O @ 0x00009000/64
[ 6.276] (II) Open ACPI successful (/var/run/acpid.socket)
[ 6.276] Initializing built-in extension Generic Event Extension
[ 6.276] Initializing built-in extension SHAPE
[ 6.276] Initializing built-in extension MIT-SHM
[ 6.276] Initializing built-in extension XInputExtension
[ 6.276] Initializing built-in extension XTEST
[ 6.276] Initializing built-in extension BIG-REQUESTS
[ 6.276] Initializing built-in extension SYNC
[ 6.276] Initializing built-in extension XKEYBOARD
[ 6.276] Initializing built-in extension XC-MISC
[ 6.276] Initializing built-in extension SECURITY
[ 6.276] Initializing built-in extension XINERAMA
[ 6.276] Initializing built-in extension XFIXES
[ 6.276] Initializing built-in extension RENDER
[ 6.276] Initializing built-in extension RANDR
[ 6.276] Initializing built-in extension COMPOSITE
[ 6.276] Initializing built-in extension DAMAGE
[ 6.276] Initializing built-in extension MIT-SCREEN-SAVER
[ 6.276] Initializing built-in extension DOUBLE-BUFFER
[ 6.276] Initializing built-in extension RECORD
[ 6.276] Initializing built-in extension DPMS
[ 6.276] Initializing built-in extension X-Resource
[ 6.276] Initializing built-in extension XVideo
[ 6.276] Initializing built-in extension XVideo-MotionCompensation
[ 6.276] Initializing built-in extension XFree86-VidModeExtension
[ 6.276] Initializing built-in extension XFree86-DGA
[ 6.276] Initializing built-in extension XFree86-DRI
[ 6.276] Initializing built-in extension DRI2
[ 6.276] (II) LoadModule: "glx"
[ 6.278] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 6.281] (II) Module glx: vendor="X.Org Foundation"
[ 6.281] compiled for 1.13.0, module version = 1.0.0
[ 6.281] ABI class: X.Org Server Extension, version 7.0
[ 6.281] (==) AIGLX enabled
[ 6.281] Loading extension GLX
[ 6.281] (II) LoadModule: "intel"
[ 6.281] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 6.285] (II) Module intel: vendor="X.Org Foundation"
[ 6.285] compiled for 1.13.0.901, module version = 2.20.14
[ 6.285] Module class: X.Org Video Driver
[ 6.285] ABI class: X.Org Video Driver, version 13.1
[ 6.285] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
ValleyView PO board
[ 6.286] (++) using VT number 7
[ 6.288] (II) intel(0): using device path '/dev/dri/card0'
[ 6.288] (**) intel(0): Depth 24, (--) framebuffer bpp 32
[ 6.288] (==) intel(0): RGB weight 888
[ 6.288] (==) intel(0): Default visual is TrueColor
[ 6.288] (**) intel(0): Option "AccelMethod" "sna"
[ 6.288] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
[ 6.289] (**) intel(0): Framebuffer tiled
[ 6.289] (**) intel(0): Pixmaps tiled
[ 6.289] (**) intel(0): 3D buffers tiled
[ 6.289] (**) intel(0): Throttling enabled
[ 6.289] (**) intel(0): Delayed flush enabled
[ 6.289] (**) intel(0): "Tear free" disabled
[ 6.289] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 6.289] (II) intel(0): Output eDP1 using monitor section eDP1
[ 6.289] (**) intel(0): Option "PreferredMode" "1920x1080"
[ 6.289] (**) intel(0): Option "Position" "1920 0"
[ 6.289] (**) intel(0): Option "Primary" "true"
[ 6.289] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
[ 6.293] (II) intel(0): Output VGA1 using monitor section VGA1
[ 6.293] (**) intel(0): Option "PreferredMode" "1920x1200_60.00"
[ 6.294] (II) intel(0): Output HDMI1 has no monitor section
[ 6.336] (II) intel(0): Output DP1 has no monitor section
[ 6.337] (II) intel(0): EDID for output eDP1
[ 6.337] (II) intel(0): Manufacturer: MS_ Model: 25 Serial#: 16843009
[ 6.337] (II) intel(0): Year: 2012 Week: 24
[ 6.337] (II) intel(0): EDID Version: 1.4
[ 6.337] (II) intel(0): Digital Display Input
[ 6.337] (II) intel(0): 8 bits per channel
[ 6.337] (II) intel(0): Digital interface is DisplayPort
[ 6.337] (II) intel(0): Max Image Size [cm]: horiz.: 29 vert.: 16
[ 6.337] (II) intel(0): Gamma: 2.20
[ 6.337] (II) intel(0): No DPMS capabilities specified
[ 6.337] (II) intel(0): Supported color encodings: RGB 4:4:4
[ 6.337] (II) intel(0): First detailed timing is preferred mode
[ 6.337] (II) intel(0): Preferred mode is native pixel format and refresh rate
[ 6.337] (II) intel(0): redX: 0.602 redY: 0.336 greenX: 0.296 greenY: 0.546
[ 6.337] (II) intel(0): blueX: 0.148 blueY: 0.126 whiteX: 0.313 whiteY: 0.329
[ 6.337] (II) intel(0): Manufacturer's mask: 0
[ 6.337] (II) intel(0): Supported standard timings:
[ 6.337] (II) intel(0): #0: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 6.337] (II) intel(0): Supported detailed timing:
[ 6.337] (II) intel(0): clock: 162.8 MHz Image Size: 291 x 164 mm
[ 6.337] (II) intel(0): h_active: 1920 h_sync: 1952 h_sync_end 1984 h_blank_end 2481 h_border: 0
[ 6.337] (II) intel(0): v_active: 1080 v_sync: 1083 v_sync_end 1086 v_blanking: 1095 v_border: 0
[ 6.337] (II) intel(0): Supported detailed timing:
[ 6.337] (II) intel(0): clock: 99.9 MHz Image Size: 291 x 164 mm
[ 6.337] (II) intel(0): h_active: 1920 h_sync: 1952 h_sync_end 1984 h_blank_end 2281 h_border: 0
[ 6.337] (II) intel(0): v_active: 1080 v_sync: 1083 v_sync_end 1086 v_blanking: 1095 v_border: 0
[ 6.337] (II) intel(0): Monitor name: Sony LCD
[ 6.337] (II) intel(0): Ranges: V min: 39 V max: 61 Hz, H min: 43 H max: 66 kHz, PixClock max 175 MHz
[ 6.337] (II) intel(0): EDID (in hex):
[ 6.337] (II) intel(0): 00ffffffffffff00367f250001010101
[ 6.337] (II) intel(0): 18160104a51d1078020f159a564b8b26
[ 6.337] (II) intel(0): 205054000000d1c00101010101010101
[ 6.337] (II) intel(0): 0101010101019c3f803172380f402020
[ 6.337] (II) intel(0): 330023a4100000180727806971380f40
[ 6.337] (II) intel(0): 2020330023a410000018000000fc0053
[ 6.337] (II) intel(0): 6f6e79204c43440a20202020000000fd
[ 6.337] (II) intel(0): 00273d2b4211000a2020202020200013
[ 6.337] (II) intel(0): EDID vendor "MS_", prod id 37
[ 6.337] (II) intel(0): Using EDID range info for horizontal sync
[ 6.337] (II) intel(0): Using EDID range info for vertical refresh
[ 6.337] (II) intel(0): Printing DDC gathered Modelines:
[ 6.337] (II) intel(0): Modeline "1920x1080"x0.0 162.84 1920 1952 1984 2481 1080 1083 1086 1095 -hsync -vsync (65.6 kHz eP)
[ 6.337] (II) intel(0): Modeline "1920x1080"x0.0 99.91 1920 1952 1984 2281 1080 1083 1086 1095 -hsync -vsync (43.8 kHz e)
[ 6.337] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 6.337] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 6.337] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 6.337] (II) intel(0): Printing probed modes for output eDP1
[ 6.337] (II) intel(0): Modeline "1920x1080"x59.9 162.84 1920 1952 1984 2481 1080 1083 1086 1095 -hsync -vsync (65.6 kHz UeP)
[ 6.337] (II) intel(0): Modeline "1920x1080"x40.0 99.91 1920 1952 1984 2281 1080 1083 1086 1095 -hsync -vsync (43.8 kHz e)
[ 6.338] (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 6.338] (II) intel(0): Modeline "1680x945"x60.0 131.48 1680 1784 1960 2240 945 946 949 978 -hsync +vsync (58.7 kHz)
[ 6.338] (II) intel(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 6.338] (II) intel(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 6.338] (II) intel(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
[ 6.338] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 6.338] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 6.338] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 6.338] (II) intel(0): Modeline "1366x768"x60.0 85.89 1366 1439 1583 1800 768 769 772 795 -hsync +vsync (47.7 kHz)
[ 6.338] (II) intel(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 6.338] (II) intel(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e)
[ 6.338] (II) intel(0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e)
[ 6.338] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 6.338] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 6.338] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 6.338] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 6.343] (II) intel(0): EDID for output VGA1
[ 6.343] (II) intel(0): Printing probed modes for output VGA1
[ 6.343] (II) intel(0): Modeline "1920x1200_60.00"x59.9 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz UP)
[ 6.343] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 6.344] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 6.344] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 6.344] (II) intel(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 6.344] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 6.344] (II) intel(0): EDID for output HDMI1
[ 6.386] (II) intel(0): EDID for output DP1
[ 6.386] (II) intel(0): Output eDP1 connected
[ 6.386] (II) intel(0): Output VGA1 connected
[ 6.386] (II) intel(0): Output HDMI1 disconnected
[ 6.386] (II) intel(0): Output DP1 disconnected
[ 6.386] (II) intel(0): Using user preference for initial modes
[ 6.386] (II) intel(0): Output eDP1 using initial mode 1920x1080
[ 6.386] (II) intel(0): Output VGA1 using initial mode 1920x1200_60.00
[ 6.386] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 6.386] (**) intel(0): Display dimensions: (290, 160) mm
[ 6.386] (**) intel(0): DPI set to (336, 190)
[ 6.386] (II) Loading sub module "dri2"
[ 6.386] (II) LoadModule: "dri2"
[ 6.387] (II) Module "dri2" already built-in
[ 6.387] (==) Depth 24 pixmap format is 32 bpp
[ 6.387] (II) intel(0): SNA initialized with IvyBridge backend
[ 6.387] (==) intel(0): Backing store disabled
[ 6.387] (==) intel(0): Silken mouse enabled
[ 6.387] (II) intel(0): HW Cursor enabled
[ 6.387] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 6.388] (==) intel(0): DPMS enabled
[ 6.388] (II) intel(0): [DRI2] Setup complete
[ 6.388] (II) intel(0): [DRI2] DRI driver: i965
[ 6.388] (II) intel(0): direct rendering: DRI2 Enabled
[ 6.388] (WW) intel(0): Option "PreferredMode" is not used
[ 6.388] (WW) intel(0): Option "Primary" is not used
[ 6.388] (WW) intel(0): Option "Position" is not used
[ 6.388] (==) intel(0): hotplug detection: "enabled"
[ 6.388] (--) RandR disabled
[ 6.410] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 6.410] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 6.410] (II) AIGLX: enabled GLX_ARB_create_context
[ 6.410] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 6.410] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 6.410] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 6.410] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 6.410] (II) AIGLX: Loaded and initialized i965
[ 6.410] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 6.411] (II) intel(0): switch to mode 1920x1080 on crtc 3 (pipe 0)
[ 6.500] (II) intel(0): switch to mode 1920x1200 on crtc 5 (pipe 1)
[ 6.663] (II) intel(0): Setting screen physical size to 1016 x 317
[ 6.703] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[ 6.703] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 6.703] (II) LoadModule: "evdev"
[ 6.704] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 6.706] (II) Module evdev: vendor="X.Org Foundation"
[ 6.706] compiled for 1.13.0, module version = 2.7.3
[ 6.706] Module class: X.Org XInput Driver
[ 6.706] ABI class: X.Org XInput driver, version 18.0
[ 6.706] (II) Using input driver 'evdev' for 'Video Bus'
[ 6.706] (**) Video Bus: always reports core events
[ 6.706] (**) evdev: Video Bus: Device: "/dev/input/event10"
[ 6.706] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 6.706] (--) evdev: Video Bus: Found keys
[ 6.706] (II) evdev: Video Bus: Configuring as keyboard
[ 6.706] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:09/input/input10/event10"
[ 6.706] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[ 6.706] (**) Option "xkb_rules" "evdev"
[ 6.706] (**) Option "xkb_model" "evdev"
[ 6.706] (**) Option "xkb_layout" "us"
[ 6.732] (II) config/udev: Adding input device Sony Vaio Keys (/dev/input/event3)
[ 6.732] (**) Sony Vaio Keys: Applying InputClass "evdev keyboard catchall"
[ 6.732] (II) Using input driver 'evdev' for 'Sony Vaio Keys'
[ 6.732] (**) Sony Vaio Keys: always reports core events
[ 6.732] (**) evdev: Sony Vaio Keys: Device: "/dev/input/event3"
[ 6.732] (--) evdev: Sony Vaio Keys: Vendor 0x104d Product 0
[ 6.732] (--) evdev: Sony Vaio Keys: Found keys
[ 6.732] (II) evdev: Sony Vaio Keys: Configuring as keyboard
[ 6.732] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/SNY5001:00/input/input3/event3"
[ 6.732] (II) XINPUT: Adding extended input device "Sony Vaio Keys" (type: KEYBOARD, id 7)
[ 6.732] (**) Option "xkb_rules" "evdev"
[ 6.732] (**) Option "xkb_model" "evdev"
[ 6.732] (**) Option "xkb_layout" "us"
[ 6.732] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/event4)
[ 6.732] (II) No input driver specified, ignoring this device.
[ 6.732] (II) This device may have been added with another device file.
[ 6.733] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/mouse0)
[ 6.733] (II) No input driver specified, ignoring this device.
[ 6.733] (II) This device may have been added with another device file.
[ 6.733] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 6.733] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 6.733] (II) Using input driver 'evdev' for 'Power Button'
[ 6.733] (**) Power Button: always reports core events
[ 6.733] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 6.733] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 6.733] (--) evdev: PowerHave you ever tried 'arandr'? It's a GUI for xrandr; it could be useful.
I used this config with nouveau, now I've successfully created my xorg.conf with nvidia blobs, but this one worked~
Section "Device"
Identifier "NVIDIA GeForce GT320"
Driver "nouveau"
Option "Monitor-DVI-I-1" "BENQ G2450"
Option "Monitor-HDMI-1" "LG W2442PA"
EndSection
Section "Monitor"
Identifier "BENQ G2450"
Option "Primary" "true"
Option "PreferredMode" "1920x1080"
Option "TargetRefresh" "60"
Option "Position" "1080 612"
EndSection
Section "Monitor"
Identifier "LG W2442PA"
Option "LeftOf" "BENQ G2450"
Option "PreferredMode" "1920x1080"
Option "TargetRefresh" "59.9"
Option "Position" "0 0"
Option "Rotate" "Left"
EndSection
Section "Screen"
Identifier "Primary Screen"
Device "NVIDIA GeForce GT320"
Monitor "BENQ G2450"
DefaultDepth 24
SubSection "Display"
Depth 24
Virtual 3000 1920
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Primary Screen"
EndSection
I'm using XFCE as well, 2 monitors, the left one rotated 90º. The main difference it's that I've the 'Virtual' option inside 'SubSection'; not sure if it's relevant.
Maybe you are looking for
-
Hi Everyone, On SDN only in the Subject line emoticons work. Still, people are interested in which ones are possible. Brian McKellar put together a list and here it is: Happy or Sad or Grin Love Mischief Cool Devil ]:) Silly Angry Laugh :^O Wink or B
-
Create Development mode selection popup
Hi All, I have to implement the popup as like Development mode selection popup. What is the component name of the popup. how to implement it? thanks, dhina
-
Problems after updating to 1.1.1
I updated my Nano to 1.1.1 today. As the Status bar on my nano finished and the screen turned back to "Do not disconnect". The iPod Updater program on my computer froze. So after that I unplugged my iPod from my computer. I resetted it. I found out t
-
Canon 5D Mark III back screen is dead after tethered capture with Lightroom 4.3
I was successfully shooting tethered using Lightroom 4.3 (PC laptop with Windows 7) and my Canon 5D Mark III, however when I disconnected the cable I was no longer able to see anything on the back of the camera, no image playback, no menu, no live vi
-
How to keep a value in blank cell in xml publisher
Hi All, I have a column which displays a value. When there is no value in that column it is showing BLANK in the report. Here I want to place some symbol like "*" or "$" in the BLANK cell. I tried using if condition but i am not clear. How can i do t