XFCE4 and Volume OSD

I have notify-osd-xfconf-bzr and xfce4-volumed installed. I get notifications for brightness and if I use
notify-send testing
notifications show up as well. However, I get no notifications when I adjust the volume using my keyboard keys. I bound the keys using the XFCE4 keyboard settings.
Any help would be great. Thanks!

Have you tried xfce4-notifyd + xfce4-volumed ?
It works for me.

Similar Messages

[Solved]Cannot startx on fresh install with xfce4 and nvidia-304xx-lts

I just installed Arch base onto my system with my Nvidia GTS 250 Graphics card, however I am unable to start a x session after installing xfce4 and nvidia-304xx-lts followed by the command nvidia-xconfig and reboot. When I try to issue startxfce4 I get an error pointing to /var/log/Xorg.0.log as follows
[ 24.856]
X.Org X Server 1.16.0
Release Date: 2014-07-16
[ 24.857] X Protocol Version 11, Revision 0
[ 24.857] Build Operating System: Linux 3.15.5-2-ARCH x86_64
[ 24.857] Current Operating System: Linux yte 3.16.2-1-ARCH #1 SMP PREEMPT Sat Sep 6 13:12:51 CEST 2014 x86_64
[ 24.857] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda5
[ 24.857] Build Date: 31 July 2014 11:53:19AM
[ 24.857]
[ 24.857] Current version of pixman: 0.32.6
[ 24.858] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 24.858] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 24.858] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 17 21:49:53 2014
[ 24.875] (==) Using config file: "/etc/X11/xorg.conf"
[ 24.875] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 24.897] (==) ServerLayout "Layout0"
[ 24.897] (**) |-->Screen "Screen0" (0)
[ 24.897] (**) | |-->Monitor "Monitor0"
[ 24.905] (**) | |-->Device "Device0"
[ 24.905] (**) |-->Input Device "Keyboard0"
[ 24.905] (**) |-->Input Device "Mouse0"
[ 24.905] (==) Automatically adding devices
[ 24.905] (==) Automatically enabling devices
[ 24.905] (==) Automatically adding GPU devices
[ 24.914] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 24.914] Entry deleted from font path.
[ 24.914] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 24.914] Entry deleted from font path.
[ 24.914] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 24.914] Entry deleted from font path.
[ 24.914] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 24.914] Entry deleted from font path.
[ 24.914] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 24.914] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 24.914] Entry deleted from font path.
[ 24.914] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 24.914] (==) FontPath set to:
/usr/share/fonts/misc/
[ 24.914] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 24.914] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 24.914] (WW) Disabling Keyboard0
[ 24.914] (WW) Disabling Mouse0
[ 24.914] (II) Loader magic: 0x818d80
[ 24.914] (II) Module ABI versions:
[ 24.914] X.Org ANSI C Emulation: 0.4
[ 24.914] X.Org Video Driver: 18.0
[ 24.914] X.Org XInput driver : 21.0
[ 24.914] X.Org Server Extension : 8.0
[ 24.917] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 24.918] (--) PCI:*(0:4:0:0) 10de:0615:19f1:0d76 rev 162, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000dc00/128, BIOS @ 0x????????/131072
[ 24.918] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 24.919] (II) LoadModule: "glx"
[ 24.953] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 25.974] (II) Module glx: vendor="NVIDIA Corporation"
[ 25.974] compiled for 4.0.2, module version = 1.0.0
[ 25.974] Module class: X.Org Server Extension
[ 25.974] (II) NVIDIA GLX Module 304.123 Wed Jul 2 11:19:55 PDT 2014
[ 25.974] (II) LoadModule: "nvidia"
[ 25.974] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 26.027] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 26.027] compiled for 4.0.2, module version = 1.0.0
[ 26.027] Module class: X.Org Video Driver
[ 26.042] (EE) NVIDIA: Failed to load the NVIDIA kernel module. Please check your
[ 26.042] (EE) NVIDIA: system's kernel log for additional error messages.
[ 26.042] (II) UnloadModule: "nvidia"
[ 26.042] (II) Unloading nvidia
[ 26.042] (EE) Failed to load module "nvidia" (module-specific error, 0)
[ 26.042] (EE) No drivers available.
[ 26.042] (EE)
Fatal server error:
[ 26.042] (EE) no screens found(EE)
[ 26.042] (EE)
Please consult the The X.Org Foundation support
at [url]http://wiki.x.org[/url]
for help.
[ 26.042] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 26.042] (EE)
It apears to be trying to load various modules, first of which is my propietary nvidia driver which refers to the kernel log. My dmesg looks like this:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.2-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.1 (GCC) ) #1 SMP PREEMPT Sat Sep 6 13:12:51 CEST 2014
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda5
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cff9ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cffa0000-0x00000000cffadfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cffae000-0x00000000cffdffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cffe0000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: HP-Pavilion FQ618AA-A2L a6734f/Benicia, BIOS 5.35 12/16/2008
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 2 base 000000000 mask F00000000 write-back
[ 0.000000] 3 base 100000000 mask FE0000000 write-back
[ 0.000000] 4 base 120000000 mask FF0000000 write-back
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcffa0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b23000, 0x01b23fff] PGTABLE
[ 0.000000] BRK [0x01b24000, 0x01b24fff] PGTABLE
[ 0.000000] BRK [0x01b25000, 0x01b25fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x12fe00000-0x12fffffff]
[ 0.000000] [mem 0x12fe00000-0x12fffffff] page 2M
[ 0.000000] BRK [0x01b26000, 0x01b26fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x12c000000-0x12fdfffff]
[ 0.000000] [mem 0x12c000000-0x12fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x12bffffff]
[ 0.000000] [mem 0x100000000-0x12bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xcff9ffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xcfdfffff] page 2M
[ 0.000000] [mem 0xcfe00000-0xcff9ffff] page 4k
[ 0.000000] RAMDISK: [mem 0x3798e000-0x37cbefff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FC440 000014 (v00 HPQOEM)
[ 0.000000] ACPI: RSDT 0x00000000CFFA0000 000044 (v01 HPQOEM SLIC-CPC 20081216 MSFT 00000097)
[ 0.000000] ACPI: FACP 0x00000000CFFA0200 000084 (v02 HPQOEM SLIC-CPC 20081216 MSFT 00000097)
[ 0.000000] ACPI: DSDT 0x00000000CFFA0440 004E91 (v01 HPQOEM SLIC-CPC 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000CFFAE000 000040
[ 0.000000] ACPI: APIC 0x00000000CFFA0390 00006C (v01 HPQOEM SLIC-CPC 20081216 MSFT 00000097)
[ 0.000000] ACPI: MCFG 0x00000000CFFA0400 00003C (v01 HPQOEM SLIC-CPC 20081216 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0x00000000CFFAE040 000072 (v01 HPQOEM SLIC-CPC 20081216 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000CFFA52E0 000038 (v01 HPQOEM SLIC-CPC 20081216 MSFT 00000097)
[ 0.000000] ACPI: GSCI 0x00000000CFFAE0C0 002024 (v01 HPQOEM SLIC-CPC 20081216 MSFT 00000097)
[ 0.000000] ACPI: SLIC 0x00000000CFFB00F0 000176 (v01 HPQOEM SLIC-CPC 00000001 MSFT 00000001)
[ 0.000000] ACPI: SSDT 0x00000000CFFB14B0 00082F (v01 HPQOEM SLIC-CPC 00000012 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000012fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x12fffffff]
[ 0.000000] NODE_DATA [mem 0x12fff7000-0x12fffbfff]
[ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x12fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0xcff9ffff]
[ 0.000000] node 0: [mem 0x100000000-0x12fffffff]
[ 0.000000] On node 0 totalpages: 1048381
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13247 pages used for memmap
[ 0.000000] DMA32 zone: 847776 pages, LIFO batch:31
[ 0.000000] Normal zone: 3072 pages used for memmap
[ 0.000000] Normal zone: 196608 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcffa0000-0xcffadfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcffae000-0xcffdffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcffe0000-0xcfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
[ 0.000000] e820: [mem 0xd0000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88012fc00000 s86784 r8192 d23808 u524288
[ 0.000000] pcpu-alloc: s86784 r8192 d23808 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031977
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda5
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4046408K/4193524K available (5334K kernel code, 887K rwdata, 1688K rodata, 1128K init, 1164K bss, 147116K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] tsc: PIT calibration matches HPET. 1 loops
[ 0.000000] tsc: Detected 2333.276 MHz processor
[ 0.006681] Calibrating delay loop (skipped), value calculated using timer frequency.. 4668.99 BogoMIPS (lpj=7777586)
[ 0.006685] pid_max: default: 32768 minimum: 301
[ 0.006695] ACPI: Core revision 20140424
[ 0.012534] ACPI: All ACPI Tables successfully acquired
[ 0.013368] Security Framework initialized
[ 0.013377] Yama: becoming mindful.
[ 0.013731] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.017212] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.017970] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.017980] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.018300] Initializing cgroup subsys memory
[ 0.018326] Initializing cgroup subsys devices
[ 0.018334] Initializing cgroup subsys freezer
[ 0.018338] Initializing cgroup subsys net_cls
[ 0.018344] Initializing cgroup subsys blkio
[ 0.018375] CPU: Physical Processor ID: 0
[ 0.018376] CPU: Processor Core ID: 0
[ 0.018379] mce: CPU supports 6 MCE banks
[ 0.018387] CPU0: Thermal monitoring enabled (TM2)
[ 0.018394] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
tlb_flushall_shift: -1
[ 0.018487] Freeing SMP alternatives memory: 20K (ffffffff819f9000 - ffffffff819fe000)
[ 0.019569] ftrace: allocating 20434 entries in 80 pages
[ 0.027196] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.060221] smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz (fam: 06, model: 17, stepping: 07)
[ 0.063333] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.063333] ... version: 2
[ 0.063333] ... bit width: 40
[ 0.063333] ... generic registers: 2
[ 0.063333] ... value mask: 000000ffffffffff
[ 0.063333] ... max period: 000000007fffffff
[ 0.063333] ... fixed-purpose events: 3
[ 0.063333] ... event mask: 0000000700000003
[ 0.076742] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.083412] x86: Booting SMP configuration:
[ 0.083415] .... node #0, CPUs: #1 #2 #3
[ 0.130014] x86: Booted up 1 node, 4 CPUs
[ 0.130018] smpboot: Total of 4 processors activated (18673.96 BogoMIPS)
[ 0.133346] devtmpfs: initialized
[ 0.136924] PM: Registering ACPI NVS region [mem 0xcffae000-0xcffdffff] (204800 bytes)
[ 0.137923] pinctrl core: initialized pinctrl subsystem
[ 0.137968] RTC time: 1:49:28, date: 09/18/14
[ 0.138025] NET: Registered protocol family 16
[ 0.138158] cpuidle: using governor ladder
[ 0.138160] cpuidle: using governor menu
[ 0.138185] ACPI: bus type PCI registered
[ 0.138187] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.138268] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.138270] PCI: not using MMCONFIG
[ 0.138272] PCI: Using configuration type 1 for base access
[ 0.153430] ACPI: Added _OSI(Module Device)
[ 0.153430] ACPI: Added _OSI(Processor Device)
[ 0.153430] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.153430] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.155075] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.157331] ACPI: Dynamic OEM Table Load:
[ 0.157338] ACPI: SSDT 0xFFFF880129AB7600 0001F3 (v01 HPQOEM SLIC-CPC 00000011 INTL 20051117)
[ 0.157716] ACPI: Dynamic OEM Table Load:
[ 0.157721] ACPI: SSDT 0xFFFF880129AB7400 0001F3 (v01 HPQOEM SLIC-CPC 00000012 INTL 20051117)
[ 0.158103] ACPI: Dynamic OEM Table Load:
[ 0.158109] ACPI: SSDT 0xFFFF8801295D4000 0001F3 (v01 HPQOEM SLIC-CPC 00000012 INTL 20051117)
[ 0.158489] ACPI: Dynamic OEM Table Load:
[ 0.158494] ACPI: SSDT 0xFFFF8801295D4200 0001F3 (v01 HPQOEM SLIC-CPC 00000012 INTL 20051117)
[ 0.158833] ACPI: Interpreter enabled
[ 0.158843] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.158857] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.158859] ACPI: Using IOAPIC for interrupt routing
[ 0.158879] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.159657] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.160132] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.165222] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.165228] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.165233] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.165516] PCI host bridge to bus 0000:00
[ 0.165519] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.165522] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.165524] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.165526] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.165528] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.165530] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff]
[ 0.165532] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xffffffff]
[ 0.165541] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[ 0.165640] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
[ 0.165677] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.165716] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.165796] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.165844] pci 0000:00:1a.0: reg 0x20: [io 0xb400-0xb41f]
[ 0.165936] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.165991] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.166039] pci 0000:00:1a.1: reg 0x20: [io 0xb480-0xb49f]
[ 0.166130] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.166194] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.166216] pci 0000:00:1a.7: reg 0x10: [mem 0xf9efec00-0xf9efefff]
[ 0.166307] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.166350] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.166407] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.166427] pci 0000:00:1b.0: reg 0x10: [mem 0xf9ef8000-0xf9efbfff 64bit]
[ 0.166516] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.166616] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.166706] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.166752] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.166807] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
[ 0.166899] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.166945] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.167003] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.167049] pci 0000:00:1d.0: reg 0x20: [io 0xb800-0xb81f]
[ 0.167139] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.167203] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.167250] pci 0000:00:1d.1: reg 0x20: [io 0xb880-0xb89f]
[ 0.167339] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.167392] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.167439] pci 0000:00:1d.2: reg 0x20: [io 0xbc00-0xbc1f]
[ 0.167528] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.167580] pci 0000:00:1d.3: [8086:2939] type 00 class 0x0c0300
[ 0.167627] pci 0000:00:1d.3: reg 0x20: [io 0xc000-0xc01f]
[ 0.167719] pci 0000:00:1d.3: System wakeup disabled by ACPI
[ 0.167782] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.167804] pci 0000:00:1d.7: reg 0x10: [mem 0xf9eff800-0xf9effbff]
[ 0.167895] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.167938] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.167989] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.168083] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.168135] pci 0000:00:1f.0: [8086:2916] type 00 class 0x060100
[ 0.168209] pci 0000:00:1f.0: can't claim BAR 13 [io 0x0800-0x087f]: address conflict with ACPI CPU throttle [io 0x0810-0x0815]
[ 0.168214] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
[ 0.168217] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
[ 0.168328] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
[ 0.168351] pci 0000:00:1f.2: reg 0x10: [io 0xc880-0xc887]
[ 0.168361] pci 0000:00:1f.2: reg 0x14: [io 0xc800-0xc803]
[ 0.168371] pci 0000:00:1f.2: reg 0x18: [io 0xc480-0xc487]
[ 0.168381] pci 0000:00:1f.2: reg 0x1c: [io 0xc400-0xc403]
[ 0.168390] pci 0000:00:1f.2: reg 0x20: [io 0xc080-0xc09f]
[ 0.168400] pci 0000:00:1f.2: reg 0x24: [mem 0xf9eff000-0xf9eff7ff]
[ 0.168458] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.168549] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.168567] pci 0000:00:1f.3: reg 0x10: [mem 0xf9effc00-0xf9effcff 64bit]
[ 0.168592] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.168733] pci 0000:04:00.0: [10de:0615] type 00 class 0x030000
[ 0.168748] pci 0000:04:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[ 0.168761] pci 0000:04:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.168774] pci 0000:04:00.0: reg 0x1c: [mem 0xfa000000-0xfbffffff 64bit]
[ 0.168784] pci 0000:04:00.0: reg 0x24: [io 0xdc00-0xdc7f]
[ 0.168793] pci 0000:04:00.0: reg 0x30: [mem 0xfeae0000-0xfeafffff pref]
[ 0.168906] pci 0000:00:01.0: PCI bridge to [bus 04]
[ 0.168909] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.168912] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfeafffff]
[ 0.168916] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.168982] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.169127] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.169187] pci 0000:02:00.0: reg 0x10: [io 0xe800-0xe8ff]
[ 0.169296] pci 0000:02:00.0: reg 0x18: [mem 0xfebff000-0xfebfffff 64bit]
[ 0.169354] pci 0000:02:00.0: reg 0x20: [mem 0xf8ff0000-0xf8ffffff 64bit pref]
[ 0.169397] pci 0000:02:00.0: reg 0x30: [mem 0xfebc0000-0xfebdffff pref]
[ 0.169663] pci 0000:02:00.0: supports D1 D2
[ 0.169665] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.169850] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.169855] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.169859] pci 0000:00:1c.2: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.169866] pci 0000:00:1c.2: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.169932] pci 0000:01:05.0: [11c1:5811] type 00 class 0x0c0010
[ 0.169949] pci 0000:01:05.0: reg 0x10: [mem 0xf9fff000-0xf9ffffff]
[ 0.170025] pci 0000:01:05.0: supports D1 D2
[ 0.170028] pci 0000:01:05.0: PME# supported from D0 D1 D2 D3hot
[ 0.170112] pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
[ 0.170119] pci 0000:00:1e.0: bridge window [mem 0xf9f00000-0xf9ffffff]
[ 0.170126] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.170128] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.170131] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.170133] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.170135] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
[ 0.170137] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xffffffff] (subtractive decode)
[ 0.170715] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.170769] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.170823] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.170875] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.170927] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[ 0.170983] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.171036] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.171088] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.171151] ACPI: Enabled 2 GPEs in block 00 to 3F
[ 0.171253] vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.171253] vgaarb: loaded
[ 0.171253] vgaarb: bridge control possible 0000:04:00.0
[ 0.171253] PCI: Using ACPI for IRQ routing
[ 0.179597] PCI: pci_cache_line_size set to 64 bytes
[ 0.179658] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 0.179660] e820: reserve RAM buffer [mem 0xcffa0000-0xcfffffff]
[ 0.179795] NetLabel: Initializing
[ 0.179797] NetLabel: domain hash size = 128
[ 0.179798] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.179813] NetLabel: unlabeled traffic allowed by default
[ 0.179835] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.179841] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.179845] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.181019] Switched to clocksource hpet
[ 0.187008] pnp: PnP ACPI init
[ 0.187030] ACPI: bus type PNP registered
[ 0.187128] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.187133] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.187213] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.187433] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ 0.187436] system 00:02: [io 0x0800-0x087f] could not be reserved
[ 0.187438] system 00:02: [io 0x0480-0x04bf] has been reserved
[ 0.187441] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.187444] system 00:02: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.187447] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.187548] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.187551] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.187555] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.187674] system 00:04: [io 0x0a00-0x0adf] has been reserved
[ 0.187678] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.187756] system 00:05: [mem 0xffc00000-0xffefffff] has been reserved
[ 0.187759] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.187825] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.187829] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.188006] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.188009] system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.188012] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.188014] system 00:07: [mem 0x00100000-0xcfffffff] could not be reserved
[ 0.188017] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.188133] pnp: PnP ACPI: found 8 devices
[ 0.188135] ACPI: bus type PNP unregistered
[ 0.197465] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.197469] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.197472] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
[ 0.197491] pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment
[ 0.197494] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.197497] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.197499] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.197505] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf01fffff]
[ 0.197510] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
[ 0.197514] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.197516] pci 0000:00:01.0: PCI bridge to [bus 04]
[ 0.197519] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.197522] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfeafffff]
[ 0.197525] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.197529] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.197532] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.197537] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff]
[ 0.197542] pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
[ 0.197548] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.197551] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.197557] pci 0000:00:1c.2: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.197561] pci 0000:00:1c.2: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.197568] pci 0000:00:1e.0: PCI bridge to [bus 01]
[ 0.197573] pci 0000:00:1e.0: bridge window [mem 0xf9f00000-0xf9ffffff]
[ 0.197582] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.197585] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.197587] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.197589] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.197591] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.197593] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xffffffff]
[ 0.197596] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.197598] pci_bus 0000:04: resource 1 [mem 0xfa000000-0xfeafffff]
[ 0.197600] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.197602] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 0.197604] pci_bus 0000:03: resource 1 [mem 0xf0000000-0xf01fffff]
[ 0.197607] pci_bus 0000:03: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
[ 0.197609] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.197611] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.197613] pci_bus 0000:02: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.197615] pci_bus 0000:01: resource 1 [mem 0xf9f00000-0xf9ffffff]
[ 0.197618] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 0.197620] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 0.197622] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.197624] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.197626] pci_bus 0000:01: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.197628] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xffffffff]
[ 0.197657] NET: Registered protocol family 2
[ 0.197878] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.197999] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.198159] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.198193] TCP: reno registered
[ 0.198203] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.198230] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.198298] NET: Registered protocol family 1
[ 0.199202] pci 0000:04:00.0: Boot video device
[ 0.199211] PCI: CLS 32 bytes, default 64
[ 0.199266] Unpacking initramfs...
[ 0.265035] Freeing initrd memory: 3268K (ffff88003798e000 - ffff880037cbf000)
[ 0.265050] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.265053] software IO TLB [mem 0xcbfa0000-0xcffa0000] (64MB) mapped at [ffff8800cbfa0000-ffff8800cff9ffff]
[ 0.265383] Scanning for low memory corruption every 60 seconds
[ 0.265750] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.266220] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.268226] zbud: loaded
[ 0.268426] VFS: Disk quotas dquot_6.5.2
[ 0.268472] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.268644] msgmni has been set to 7909
[ 0.268709] Key type big_key registered
[ 0.269063] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.269162] io scheduler noop registered
[ 0.269165] io scheduler deadline registered
[ 0.269227] io scheduler cfq registered (default)
[ 0.269402] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.269456] pcieport 0000:00:1c.0: enabling device (0104 -> 0107)
[ 0.269523] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.269664] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 0.269772] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.269794] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.269839] intel_idle: does not run on family 6 model 23
[ 0.269876] GHES: HEST is not enabled!
[ 0.269980] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.270599] Linux agpgart interface v0.103
[ 0.270658] rtc_cmos 00:01: RTC can wake from S4
[ 0.270820] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.270850] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.270864] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.270984] TCP: cubic registered
[ 0.271114] NET: Registered protocol family 10
[ 0.271372] NET: Registered protocol family 17
[ 0.271821] registered taskstats version 1
[ 0.272365] Magic number: 14:261:812
[ 0.272465] rtc_cmos 00:01: setting system clock to 2014-09-18 01:49:28 UTC (1411004968)
[ 0.272539] PM: Hibernation image not present or could not be loaded.
[ 0.273767] Freeing unused kernel memory: 1128K (ffffffff818df000 - ffffffff819f9000)
[ 0.273769] Write protecting the kernel read-only data: 8192k
[ 0.276140] Freeing unused kernel memory: 800K (ffff880001538000 - ffff880001600000)
[ 0.277248] Freeing unused kernel memory: 360K (ffff8800017a6000 - ffff880001800000)
[ 0.284774] random: systemd-tmpfile urandom read with 1 bits of entropy available
[ 0.286420] systemd-udevd[59]: starting version 216
[ 0.299539] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.302475] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.302536] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.305975] ACPI: bus type USB registered
[ 0.306007] usbcore: registered new interface driver usbfs
[ 0.306020] usbcore: registered new interface driver hub
[ 0.306135] usbcore: registered new device driver usb
[ 0.306716] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.307076] ehci-pci: EHCI PCI platform driver
[ 0.307191] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.307253] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.307261] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.307274] ehci-pci 0000:00:1a.7: debug port 1
[ 0.311183] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[ 0.311202] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf9efec00
[ 0.315748] SCSI subsystem initialized
[ 0.317397] libata version 3.00 loaded.
[ 0.320025] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.323598] hub 1-0:1.0: USB hub found
[ 0.323608] hub 1-0:1.0: 4 ports detected
[ 0.323904] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.323911] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.323925] ehci-pci 0000:00:1d.7: debug port 1
[ 0.327815] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 0.327834] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf9eff800
[ 0.336696] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.336926] hub 2-0:1.0: USB hub found
[ 0.336936] hub 2-0:1.0: 8 ports detected
[ 0.337334] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.337345] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.337354] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 0.337394] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b400
[ 0.337866] hub 3-0:1.0: USB hub found
[ 0.337875] hub 3-0:1.0: 2 ports detected
[ 0.338094] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.338100] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.338107] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 0.338134] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b480
[ 0.338347] hub 4-0:1.0: USB hub found
[ 0.338355] hub 4-0:1.0: 2 ports detected
[ 0.338546] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.338553] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.338559] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 0.338578] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b800
[ 0.338786] hub 5-0:1.0: USB hub found
[ 0.338794] hub 5-0:1.0: 2 ports detected
[ 0.338981] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.338987] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.338993] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 0.339020] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b880
[ 0.339235] hub 6-0:1.0: USB hub found
[ 0.339244] hub 6-0:1.0: 2 ports detected
[ 0.339429] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.339435] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.339442] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 0.339460] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000bc00
[ 0.339667] hub 7-0:1.0: USB hub found
[ 0.339675] hub 7-0:1.0: 2 ports detected
[ 0.339862] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.339870] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[ 0.339876] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 0.339894] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000c000
[ 0.340109] hub 8-0:1.0: USB hub found
[ 0.340117] hub 8-0:1.0: 2 ports detected
[ 0.340263] ahci 0000:00:1f.2: version 3.0
[ 0.340410] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 0.340467] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.340515] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 0.340519] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
[ 0.366734] firewire_ohci 0000:01:05.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
[ 0.374399] scsi0 : ahci
[ 0.374615] scsi1 : ahci
[ 0.374814] scsi2 : ahci
[ 0.375005] scsi3 : ahci
[ 0.375196] scsi4 : ahci
[ 0.375388] scsi5 : ahci
[ 0.375468] ata1: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff100 irq 43
[ 0.375472] ata2: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff180 irq 43
[ 0.375474] ata3: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff200 irq 43
[ 0.375477] ata4: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff280 irq 43
[ 0.375480] ata5: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff300 irq 43
[ 0.375482] ata6: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff380 irq 43
[ 0.630034] usb 1-2: new high-speed USB device number 2 using ehci-pci
[ 0.693360] ata1: SATA link down (SStatus 0 SControl 300)
[ 0.754296] hub 1-2:1.0: USB hub found
[ 0.754373] hub 1-2:1.0: 7 ports detected
[ 0.866772] firewire_core 0000:01:05.0: created device fw0: GUID 001e8c0001bb0f0a, S400
[ 1.013360] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.266684] tsc: Refined TSC clocksource calibration: 2333.285 MHz
[ 1.333363] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.336819] ata3.00: ATA-8: WDC WD10EARS-00MVWB0, 50.0AB50, max UDMA/133
[ 1.336823] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.340399] ata3.00: configured for UDMA/133
[ 1.340517] scsi 2:0:0:0: Direct-Access ATA WDC WD10EARS-00M AB50 PQ: 0 ANSI: 5
[ 1.373365] usb 2-5: new high-speed USB device number 3 using ehci-pci
[ 1.500038] usb-storage 2-5:1.0: USB Mass Storage device detected
[ 1.500227] scsi6 : usb-storage 2-5:1.0
[ 1.500322] usbcore: registered new interface driver usb-storage
[ 1.500694] usbcore: registered new interface driver uas
[ 1.660027] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.980028] usb 5-1: new full-speed USB device number 2 using uhci_hcd
[ 1.980030] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.125620] usb 5-1: config 1 has an invalid descriptor of length 17, skipping remainder of the config
[ 2.125624] usb 5-1: config 1 has 1 interface, different from the descriptor's value: 4
[ 2.125628] usb 5-1: config 1 interface 0 altsetting 0 has 0 endpoint descriptors, different from the interface descriptor's value: 2
[ 2.266750] Switched to clocksource tsc
[ 2.370018] usb 4-1: new full-speed USB device number 2 using uhci_hcd
[ 2.504151] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 2.504778] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 2.505402] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 2.506038] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 2.509294] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.509340] sd 2:0:0:0: [sda] Write Protect is off
[ 2.509343] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.509363] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.515260] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 2.515889] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[ 2.516511] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[ 2.517136] sd 6:0:0:3: [sde] Attached SCSI removable disk
[ 2.569106] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 2.569597] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.571450] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.586591] usbcore: registered new interface driver usbhid
[ 2.586594] usbhid: USB HID core driver
[ 2.587316] input: Logitech Gaming Mouse G600 as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/0003:046D:C24A.0001/input/input2
[ 2.587394] hid-generic 0003:046D:C24A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech Gaming Mouse G600] on usb-0000:00:1a.1-1/input0
[ 2.620024] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.621301] input: Logitech Gaming Mouse G600 as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.1/0003:046D:C24A.0002/input/input3
[ 2.621413] hid-generic 0003:046D:C24A.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech Gaming Mouse G600] on usb-0000:00:1a.1-1/input1
[ 2.623705] ata6.00: ATAPI: HL-DT-ST BDDVDRW GBC-H20L, 1.B8, max UDMA/100
[ 2.628682] ata6.00: configured for UDMA/100
[ 2.741224] scsi 5:0:0:0: CD-ROM HL-DT-ST BDDVDRW GBC-H20L 1.B8 PQ: 0 ANSI: 5
[ 2.796696] usb 8-2: new full-speed USB device number 2 using uhci_hcd
[ 2.870295] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.870300] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.870508] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 2.983435] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1d.3/usb8/8-2/8-2:1.0/0003:046D:C318.0003/input/input4
[ 2.983518] hid-generic 0003:046D:C318.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1d.3-2/input0
[ 2.987055] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1d.3/usb8/8-2/8-2:1.1/0003:046D:C318.0004/input/input5
[ 2.987190] hid-generic 0003:046D:C318.0004: input,hiddev0,hidraw3: USB HID v1.11 Device [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1d.3-2/input1
[ 3.173499] usb 1-2.7: new high-speed USB device number 4 using ehci-pci
[ 3.257551] hub 1-2.7:1.0: USB hub found
[ 3.257622] hub 1-2.7:1.0: 4 ports detected
[ 3.316702] floppy0: no floppy controllers found
[ 3.830625] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 4.027733] random: nonblocking pool is initialized
[ 4.403265] systemd[1]: systemd 216 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN )
[ 4.403452] systemd[1]: Detected architecture 'x86-64'.
[ 4.434571] systemd[1]: Set hostname to <yte>.
[ 5.263934] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 5.264264] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 5.264322] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.264334] systemd[1]: Starting Remote File Systems.
[ 5.264630] systemd[1]: Reached target Remote File Systems.
[ 5.264663] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 5.265007] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.265025] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 5.265058] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 5.265067] systemd[1]: Starting Paths.
[ 5.265331] systemd[1]: Reached target Paths.
[ 5.265342] systemd[1]: Starting Encrypted Volumes.
[ 5.265614] systemd[1]: Reached target Encrypted Volumes.
[ 5.265625] systemd[1]: Expecting device dev-sda3.device...
[ 5.265819] systemd[1]: Expecting device dev-sda6.device...
[ 5.266013] systemd[1]: Starting Root Slice.
[ 5.275815] systemd[1]: Created slice Root Slice.
[ 5.275829] systemd[1]: Starting User and Session Slice.
[ 5.276279] systemd[1]: Created slice User and Session Slice.
[ 5.276291] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 5.276593] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 5.276604] systemd[1]: Starting Delayed Shutdown Socket.
[ 5.276899] systemd[1]: Listening on Delayed Shutdown Socket.
[ 5.276910] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 5.277203] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 5.277213] systemd[1]: Starting Journal Socket (/dev/log).
[ 5.277507] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.277518] systemd[1]: Starting LVM2 metadata daemon socket.
[ 5.277808] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 5.277824] systemd[1]: Starting udev Kernel Socket.
[ 5.278109] systemd[1]: Listening on udev Kernel Socket.
[ 5.278123] systemd[1]: Starting udev Control Socket.
[ 5.278410] systemd[1]: Listening on udev Control Socket.
[ 5.278424] systemd[1]: Starting Journal Socket.
[ 5.278716] systemd[1]: Listening on Journal Socket.
[ 5.278736] systemd[1]: Starting System Slice.
[ 5.279185] systemd[1]: Created slice System Slice.
[ 5.279201] systemd[1]: Starting File System Check on Root Device...
[ 5.279858] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 5.280411] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 5.371945] systemd[1]: Mounting Temporary Directory...
[ 5.379927] systemd[1]: Starting system-getty.slice.
[ 5.380442] systemd[1]: Created slice system-getty.slice.
[ 5.414498] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 5.477478] systemd[1]: Started Set Up Additional Binary Formats.
[ 5.477515] systemd[1]: Mounting POSIX Message Queue File System...
[ 5.503309] systemd[1]: Started Load Kernel Modules.
[ 5.503363] systemd[1]: Starting Apply Kernel Variables...
[ 5.504202] systemd[1]: Mounting Configuration File System...
[ 5.504898] systemd[1]: Mounted FUSE Control File System.
[ 5.504935] systemd[1]: Mounting Huge Pages File System...
[ 5.505656] systemd[1]: Mounting Debug File System...
[ 5.506353] systemd[1]: Starting Setup Virtual Console...
[ 5.507155] systemd[1]: Starting udev Coldplug all Devices...
[ 5.507863] systemd[1]: Starting Journal Service...
[ 5.508912] systemd[1]: Started Journal Service.
[ 5.600542] EXT4-fs (sda5): re-mounted. Opts: data=ordered
[ 5.836201] systemd-udevd[175]: starting version 216
[ 6.237023] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
[ 6.237029] ACPI: Power Button [PWRB]
[ 6.237089] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[ 6.237092] ACPI: Power Button [PWRF]
[ 6.393110] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082f conflicts with OpRegion 0x0000000000000800-0x000000000000084f (\PMRG) (20140424/utaddress-258)
[ 6.393118] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.393146] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 6.403316] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.624551] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 6.697197] sound hdaudioC0D0: ALC1200: SKU not ready 0x411111f0
[ 6.697713] sound hdaudioC0D0: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 6.697715] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.697718] sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 6.697720] sound hdaudioC0D0: mono: mono_out=0x0
[ 6.697722] sound hdaudioC0D0: dig-out=0x11/0x1e
[ 6.697724] sound hdaudioC0D0: inputs:
[ 6.697726] sound hdaudioC0D0: Front Mic=0x19
[ 6.697729] sound hdaudioC0D0: Rear Mic=0x18
[ 6.697731] sound hdaudioC0D0: Line=0x1c
[ 6.697732] sound hdaudioC0D0: dig-in=0x1f
[ 6.702189] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 6.709310] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 6.717944] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input8
[ 6.718325] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 6.718367] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 6.718409] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 6.718451] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 6.718493] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 6.718576] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 6.718699] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 6.718743] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 6.728756] microcode: CPU0 sig=0x10677, pf=0x10, revision=0x705
[ 6.780564] gpio_ich: GPIO from 195 to 255 on gpio_ich
[ 6.802218] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 6.802227] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 6.802531] r8169 0000:02:00.0: irq 45 for MSI/MSI-X
[ 6.802745] r8169 0000:02:00.0 eth0: RTL8168c/8111c at 0xffffc90010736000, 00:24:8c:13:67:78, XID 1c4000c0 IRQ 45
[ 6.802748] r8169 0000:02:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[ 6.815163] microcode: CPU1 sig=0x10677, pf=0x10, revision=0x705
[ 6.815200] microcode: CPU2 sig=0x10677, pf=0x10, revision=0x705
[ 6.815216] microcode: CPU3 sig=0x10677, pf=0x10, revision=0x705
[ 6.815650] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 6.852178] iTCO_vendor_support: vendor-support=0
[ 6.951618] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 6.951664] iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0860)
[ 6.952163] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.961276] systemd-udevd[183]: renamed network interface eth0 to enp2s0
[ 6.962065] mousedev: PS/2 mouse device common for all mice
[ 7.539521] Adding 4051964k swap on /dev/sda3. Priority:-1 extents:1 across:4051964k FS
[ 8.405763] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: data=ordered
[ 8.687024] systemd-journald[157]: Received request to flush runtime journal from PID 1
[ 9.356701] floppy0: no floppy controllers found
[ 10.274611] r8169 0000:02:00.0 enp2s0: link down
[ 10.274665] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 11.871962] r8169 0000:02:00.0 enp2s0: link up
[ 11.871971] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
Due to the length of the above logs I looked for a option to upload them but could not find the button for this, my appologies. Would anyone be able to see where I am going wrong?
Last edited by meschael (2014-09-18 04:16:08)

The first code block contains my Xorg.0.log however I just tryed modprove nvidia and recieved FATAL: Module nvidia not found. which I discovered was solved by someone here https://bbs.archlinux.org/viewtopic.php?pid=961852 however when I tryed to do a pacman -S nvidia nvidia-utils I get a unresolved confilict with nvidia-304xx-utils which after trying to remove with pacman -Rs shows dependencies with cario, Im not sure how far back I should start removing things to solve this conflict or how to go abouts solving it
+++++++++
Update: Solved
+++++++++
I did some more looking and found I could force the uninstall of nvidia-304xx-lts with pacman -Rdds nvidia-304xx-lts and after revisiting the Nvidia page on the wiki for the dozenth time I started thinking maybe I needed nvidia-304xx oposed to the lts release as google as kindly pointed out lts is long term support and maybe my kernel was not lts and thus conflicting. This turned out to be the case, after removing the ofending lts version of the driver, replacing with the correct nvidia-304xx , another nvidia-xconfig and reboot followed by modprobe nvida and startxfce4 my wounderfull xfce is now running as I type this messsage in firefox. Thank you for you help, as you asking about the modprobe output caused the chain of events leading to the success.
Last edited by meschael (2014-09-18 04:15:30)

Okay before my ipod power and volume buttons werent working but i never dropped it, then one day i was in a app and my ipod froze so i held the home button down and the screen went a bright green color and isnt showing up in itunes

okay I just recently bought a ipod touch 4thG and im already having issues. recently the power and volume buttons stopped working after i syncd my ipod, i shrugged it off figuring it would come back i could live without it. but today I was on my ipod while it was charging and the screen just froze so i pressed and held the home button (being that's the only button that actually works) then the screen turned this bright yellowish lime green color and its not responding to ANYTHING! my computer isnt even reading it when i plug it up into itunes! so what should i do? can anyone help me? i feel like i just wasted $200...

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

My ipod nano 6th gen doesn't start. When I plug it, only blink the apple logo on the screen. I try to reset it holding by 8 seconds start button and volume down and doesn't work. My Ipod doesn't have any shock or water damage. How can I do?

My ipod nano 6th gen doesn't start. When I plug it, only blink the apple logo on the screen. I try to reset it holding by 8 seconds start button and volume down and doesn't work. My Ipod doesn't have any shock or water damage. How can I do?

Hey rulosrojos,
The article linked below details a number of troubleshooting steps that can help restore functionality to your iPod nano.
iPod nano (6th generation): Hardware troubleshooting
https://support.apple.com/en-us/TS3474
Sincerely,
Allen

Ipod Touch 5.1.1 update lock and volume buttons wont work.

So I just updated my ipod touch 4G to the ios 5.1.1 version and ever since my volume and lock buttons aren't working/responding. The funny thing is, a lot of people are posting the same question but they get the same answer from the same person that says to hold the lock and home button when everybody specifally states that the lock and volume buttons aren't working so those answers are useless. I tried resetting all the settings to factory from the settings menu but still the same problem. What should I do? Is it a bug for every new updater?

Try changing the DNS server on the iPod. See:
iOS 5 update issues "Network...: Apple Support Communities

I have a number of apps on my Ipad2 that no longer have sound. I have checked setting on my ipad and the settings on the apps that have a settings and the sound and volume are ok. Do I have a virus in some apps?

I have a number of apps on my ipad2 tha no longer have sound. I have checked the ipad settings and the apps that have settings and all sound and volume are ok. Do I have a virus? Pandora sound is ok. It seems mostly to be games...angry birds, tap tap, and educational games for little ones. Any suggestions?

There aren't any viruses for iOS devices. Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

IPad 2 Rotation, Sleep, and Volume Buttons Don't Work.

I have an iPad 2 running 7.1.1 (11D201) and just yesterday the sleep sleep and volume buttons don't work, and the screen won't rotate at all. I have already tried the following:
Switched the Lock Rotation/Mute settings in General
Power cycling it
Held the sleep and menu button to reset it (the button worked for that at least)
Done a network reset
Reset All Settings and restored from backup
Reset All Settings and restored from iCloud
Erase All Content and Settings and restored from backup
Erase All Content and Settings and restored from iCloud
If anyone has any OTHER suggestions besides what I've already tried, I am all ears. Thanks.

Go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without be charged again. Also, if you have IOS-7, read this.

My earphones mic and volume buttons don't work ever since the iOS 8.1 update! Please help me. One discussion person says they bought a new pair and THEY don't work either. What do I do? I'm about to have a breakdown!

I rely heavily on my earphones because well... I'm lazy but they don't work. They work on my friend's iPhone who hasn't updated yet but I've updayed and the mic and volume buttons don't work. Please make a correct update!

Nope, still same problem. I did an install, didn't work. Then I completely removed my IDT driver, restarted, installed the driver, restarted, same problem.
When I troubleshoot my audio it always asks me which one to troubleshoot. It only works if I do one of the "Speakers / HP - IDT" but I don't know why it has so many devices listed with the same name.
Also, after I troubleshoot and I can hear audio, if I go to "Manage audio devices" it still shows that no audio device is installed, which is why the webinars won't work.

IN BOM the Weight and Volume Update from the Parent item when Change Itemca

Hi Guru
we are facing problem when we create SO for Configuration material, By Default all the weight and Volume Flow Proparlly form Material Master for all Parent and Child item but when we change the item Categries for Child item the weight is copied from Parent Material
Please give me solution for the above
Prasanna

Hi Prasanna,
Check with weight/volume update in VOV7 for the item category you are using/changing manually.
Regards
Jeewnath

I have an iMac mid 2010. After Disk utilities said the drive was corrupt, I ran the hardware test (extended) 3 times. No problems. I than ran Disk utility again and got 2 messages in red-keys out of order, and --Volume corrupt, can't be repaired. I tried

I have an iMac mid 2010. After Disk utilities said the drive was corrupt, I ran the hardware test (extended) 3 times. No problems. I than ran Disk utility again and got 2 messages in red…keys out of order, and ……Volume corrupt, can't be repaired.
I tried to do a system install, but message said…disk can't be changed. Will a complete erase and install fix this ?
Everything is backed-up.

There's hardware and software.
Your drive could physically be in good condition but something has caused the file structure to be messed up (it just happens sometimes). The directory that keep track of files is corrupt. Disk Utility can help determine if that is the issue. In some cases it can repair the problem but it cannot do it to a drive that is being used to boot the system while you are doing that. You have to boot from another drive. Some things DU cannot repair and you need to try a stronger utility such as Diskwarrior.
A failing hard drive (one with mechanical issues) can be a cause of file structure issues but this is by no means always the case. Apart from looking at the SMART diagnosis feature of Disk Utility (and smart isn't totally reliable) there often isn't a way to tell if a drive is failing until it suddenly happens, which is why you need to maintain backups.
In your situation it does sound serious and not just minor directory corruption. You can try erasing (formatting) the drive, You may need to do this if it is really corrupt, in which case there could be underlying physical issues. I use old technology but if you have the patience you can try erasing the drive with the security option of writing zeros once (don't do more unless you are going on a 3 week vacation). This makes the drive not simply assume everything is okay by forcing it try every part of the drive by writing data. If something is gong wrong you may find it marks a lot of bad sectors, or flat out refuses to format. Then you know you need a new drive.

Directory Scan and Volume Structure Failure

My imac (white, 24") has been running slow and freezing up while attempting to preview files. Ran Disc Utility and OnyX, which gave me the following permission issues:
Permissions differ on "usr/share/derby", should be drwxr-xr-x , they are lrwxr-xr-x
Repaired "usr/share/derby"
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/
But otherwise, both said the disk was fine.
Ran TechTools failed the Directory Scan, Format Scan, and Volume Scan. I restarted from a second partition on the same HD. This partition passed all tests.
I repeated all three tests on the original partition. This time, Disk Utility could not verify or repair the original partition and no longer recognized it as a valid startup disk. I erased the partition and restored from a Time Machine backup. Now, I get the following permission errors:
Permissions differ on "usr/share/derby", should be drwxr-xr-x , they are lrwxr-xr-x
Repaired "usr/share/derby"
ACL found but not expected on "Library/Preferences/Audio"
Repaired "Library/Preferences/Audio"
ACL found but not expected on "Library/Preferences/com.apple.alf.plist"
Repaired "Library/Preferences/com.apple.alf.plist"
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/
And while once again OnyX and Disk Utility says the disk is fine, Tech Tools still reports a Directory Scan failure and Volume Structure failure. A subsequent Surface Scan passed.
Ideas? Is this a software failure or a hardware failure? Both partitions are running 10.6.3. This is the second HD on this imac, the previous 750GB failed completely and could not be restored.

Kyle W wrote:
It says permissions are repaired on those items, but when I verify permissions, they are still not right.
See Mac OS X: Disk Utility's Repair Disk Permissions messages that you can safely ignore. It isn't that the permissions themselves are wrong but that the database of correct permissions on your hard drive the utility refers to has not been updated to reflect the permissions settings & directory structure changes in the most recent OS updates. This is a known issue that affects everyone, but as the article says, you can ignore it.
Mac is not experiencing the same slow down on routine items as it was before, but TechTools is still saying there's a problem.
What version of TechTools are you using? If it is not a current one it may not recognize the recent changes in the file system structure made in Snow Leopard.

I forgot my ipod password and i didnt use it for along time so it wont even connect to itunes plus it fell in the toilet so my home button and volume button doesnt work what do i do?

I forgot my ipod password and i didnt use it for along time so it wont even connect to itunes plus it fell in the toilet so my home button and volume button doesnt work what do i do?

Place the iOS device in recovery mode using this program
RecBoot: Easy Way to Put iPhone into Recovery Mode
http://jaxov.com/2010/05/recboot-iphone-recovery-mode/and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
Enter DFU mode without home button or Power Button | technoNix
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

There was a problem connecting to the server "my server.local" this file is available on your computer. Access the files and volumes locally.

Hi,
I have a strange problem connecting one of the office laptops (Macbook Pro 10.7) to the disk in the Apple Time Capsule. It's just one laptop that has this problem and the other 3 no problems at all and they all run OS X 10.7 Lion, I can access the Time Capsule disk over WAN on all machines but locally on the problem machine i get this message "There was a problem connecting to the server "myserver.local" this file is available on your computer. Access the files and volumes locally." Now from this message it sounds like the problem laptop thinks the network drive (Time Capsule) is the same as it's self in the way of name or address however they clearly have different IP addresses locally.
Any ideas on this would be apreciated as I can only think a clean install but don't want to do this if not necessary.
Thanks
Jarrah

I think I gave you some bad info in the above, where i enterered the text "myserver.local" & "example.local" this was the host name of the server (Time Capsule) so not local on the computer.
No i didn't try your method, I'll give it a go - I thought the folder option was for local files and not on a server ?

Why do i get a camera icon and volume bar on my lock screen now that i have updated to ios 5

Why do i get a camera icon (bottom right)and volume/buffer bar (top centre) of lock screen....only happening since ios5 update..

It's a feature of iOS5. If you double tab the home button, you can use the camera or play music without having to enter your lock code. If you single tap the home button, you should just see the lock screen. It's nice if you want to take a picture quickly.

Scroll bar and volume indicator

Somehow the scroll bar on the right side of the touchpad doesn't work. Also even though the touch slider for the volume still works, the screen graphic showing the volume slider when it is moved doesn't appear. This started when somehow a number of files on the system became "read only" and I had to go to each one and take off the read only designation. Is there a location for the scroll bar and volume graphic that needs to be turned on? The mouse itself works fine and I can still scroll with the scroll buttons onscreen.
I have an HP dv-6 1355dx.

Hi, thanks a lot for the support. I've found the solution!
I've checked all of the installed programs on my system. All programs are from verified publishers.
Actual problem was with graphic drivers. My laptop is Sony Vaio and therefore I had the recommended latest drivers (for my graphic card) available from Sony website installed. The graphic card is from NVIDIA GeForce. So, don't know why but I uninstalled all graphic drivers from the system and downloaded the latest drivers available for my graphic card hardware from NVIDIA website. Now the new latest drivers from NVIDIA solved the problem !!! Firefox is working perfect. No problem on any website.
May be the same can work for other Firefox users also having this problem. No need to disable "hardware acceleration when available" in Firefox.
Happy !!!! :D :D

XFCE4 and Volume OSD

Similar Messages

Maybe you are looking for