Xfce4-brightness-plugin : no device found
I cannot adjust my brightness with the applet, when I mouseover it, it says no device found.
Any idea how to fix this?
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 09)
KMS is explained here http://wiki.archlinux.org/index.php/KMS intel specific here http://wiki.archlinux.org/index.php/Intel In short, AFAIK, graphic card/adapter initialization and configuration are done in kernel, without the need for user interaction. That way, user should get all graphic related stuff setup as soon as kernel loaded (this includes native display resolution both in console and X, backlight control, power-saving, etc). Follow the instruction mentioned in wiki above, and let's see the result.
Last edited by nsa.wijayanto (2010-04-29 13:23:21)
Similar Messages
-
IPC for xbacklight - xfce4-brightness-plugin
I've modified the brightness plugin via ABS so that it displays the current brightness in its tooltip.
This works fine while the plugin itself is used to modify brightness.
However, when xbacklight is used, then the plugin will not know to update its tooltip, because it doesn't get notified about the brightness change.
What is an elegant way to contact brightness-plugin when xbacklight manipulates the backlight brightness?
My simple idea so far is:
xbacklight must be called by a script which will also write to a file in a specific location, and brightness-plugin will continuously poll that location, and then notice the brightness change when it sees that temporary file. That sounds pretty crude though, doesn't it?
ThanksKMS is explained here http://wiki.archlinux.org/index.php/KMS intel specific here http://wiki.archlinux.org/index.php/Intel In short, AFAIK, graphic card/adapter initialization and configuration are done in kernel, without the need for user interaction. That way, user should get all graphic related stuff setup as soon as kernel loaded (this includes native display resolution both in console and X, backlight control, power-saving, etc). Follow the instruction mentioned in wiki above, and let's see the result.
Last edited by nsa.wijayanto (2010-04-29 13:23:21) -
[solved] xfce4-mailwatch-plugin svn not able to compile
After todays update my xfce4-mailwatch-plugin stopped working. I am using the svn version and trying to compile it again gives:
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for intltool >= 0.31... 0.40.3 found
checking for intltool-update... /usr/bin/intltool-update
checking for intltool-merge... /usr/bin/intltool-merge
checking for intltool-extract... /usr/bin/intltool-extract
checking for xgettext... /usr/bin/xgettext
checking for msgmerge... /usr/bin/msgmerge
checking for msgfmt... /usr/bin/msgfmt
configure: error: GNU gettext tools not found; required for intltool
gettext is installed though - what is going on here?
Last edited by mykey (2008-08-16 06:49:28)bump
The before mentioned app is not the only one that does not build properly - I tried gnubiff and audio-convert-mod with just the same error message
configure: error: GNU gettext tools not found; required for intltool
What can I do? Would filing a bug-report help? -
Brand new Arch with
Xfce 4 Desktop Environment
version 4.6.1 (Xfce 4.6)
When I try to add the netload panel item I get:
Xfce4-Netload-Plugin: Error in initalizing:
Interface was not found.
Any ideas?
Last edited by CaptainKirk (2009-06-09 09:30:25)I have the same problem
Even after Rebooting the problem still exists.
Any other solution ? -
Xfce4-sensors-plugin crashes since update yesterday
Hello,
as stated in the headline, I'm using xfce4 with the
extra/xfce4-sensors-plugin 0.10.99.6-2 (xfce4-goodies)
plugin. Since yesterday (I updated my system with yaourt -Syu --aur) it crashes constantly if I try to start it in the panel.
If I try too start it on command line:
$ xfce4-sensors
Segmentation fault
The strange thing is: I installed aur/xfce4-sensors-plugin-git 20091013-1 - and it worked!
Would be very nice if the maintainer of the xfce4-sensors-plugin could fix this abboying bug!
Thanks!Okay... things become stranger... yesterday, I tried again xfce4-sensors-plugin 0.10.99.6-2 - and it worked. Today, as I started my system... it worked not!
I have searched a little bit around how to analyse an Segfault and found gdb. Here is the gdb output:
$ gdb xfce4-sensors
GNU gdb (GDB) 7.0
Copyright (C) 2009 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show copying"
and "show warranty" for details.
This GDB was configured as "x86_64-unknown-linux-gnu".
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>...
Reading symbols from /usr/bin/xfce4-sensors...(no debugging symbols found)...done.
(gdb) run
Starting program: /usr/bin/xfce4-sensors
[Thread debugging using libthread_db enabled]
libnotify-Message: Unable to get session bus: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
** (xfce4-sensors:12517): CRITICAL **: dbus_g_proxy_connect_signal: assertion `DBUS_IS_G_PROXY (proxy)' failed
** (xfce4-sensors:12517): CRITICAL **: dbus_g_proxy_connect_signal: assertion `DBUS_IS_G_PROXY (proxy)' failed
** (xfce4-sensors:12517): CRITICAL **: dbus_g_proxy_call: assertion `DBUS_IS_G_PROXY (proxy)' failed
Program received signal SIGSEGV, Segmentation fault.
0x00007ffff4c1d049 in free () from /lib/libc.so.6
(gdb) backtrace
#0 0x00007ffff4c1d049 in free () from /lib/libc.so.6
#1 0x00007ffff7bd919e in free_chipfeature () from /usr/lib/xfce4/modules/libxfce4sensors.so.1
#2 0x00007ffff7bdc232 in remove_unmonitored_drives () from /usr/lib/xfce4/modules/libxfce4sensors.so.1
#3 0x00007ffff7bdc482 in initialize_hddtemp () from /usr/lib/xfce4/modules/libxfce4sensors.so.1
#4 0x00007ffff7bd95e7 in initialize_all () from /usr/lib/xfce4/modules/libxfce4sensors.so.1
#5 0x00007ffff7bda434 in sensors_new () from /usr/lib/xfce4/modules/libxfce4sensors.so.1
#6 0x00000000004017d6 in ?? ()
#7 0x00007ffff4bc5b6d in __libc_start_main () from /lib/libc.so.6
#8 0x0000000000401589 in ?? ()
#9 0x00007fffffffe4d8 in ?? ()
#10 0x000000000000001c in ?? ()
#11 0x0000000000000001 in ?? ()
#12 0x00007fffffffe86e in ?? ()
#13 0x0000000000000000 in ?? ()
(gdb)
Could anyone say, where the problem is? -
Installing xfce4-xfapplet-plugin-0.1.0
Hi guys,
A few days ago, I started with Arch Linux to learn how Linux works. Beating my way through Google and Arch Website, I got Wireless Network, XFCE4 and some other nice services going, but this just won't work:
I'd like to install xfce4-xfapplet-plugin-0.1.0. Pacman doesn't find anything, the package is not in abs (should be in XFCE goodies, but it's not), and when I try to install via tarball, .configure returns after a while of running around:
checking for libpanelapplet-2.0 >= 2.0.0... not found
*** The required package libpanelapplet-2.0 was not found on your system.
*** Please install libpanelapplet-2.0 (atleast version 2.0.0) or adjust
*** the PKG_CONFIG_PATH environment variable if you
*** installed the package in a nonstandard prefix so that
*** pkg-config is able to find it.
I couldn't find any help on that online. Does anybody know what's wrong?
Cheers,
KalsanYou're in for some work here. You could conceivably make this work with mate-panel which is a fork of gnome 2, but the paths are different and you'd need to write that into the pkgbuild to build it.
I think if you search for mate xfce and gnome panel you might find some pointers to get you started. But I think you are better off looking for substitutes. -
Xbox 360 controllers : gamepad plugged but still "no devices found" ?
You have a Mac running on Lion or Mountain Lion, you have download the app http://files.tattiebogle.net/360/360ControllerInstall.dmg from :
http://tattiebogle.net/index.php/ProjectRoot/Xbox360Controller/OsxDriver
You have done everything right but when you plug your gamepad (official microsoft Xbox 360 controller only, I used a wired gamepad so, I don't assure you it will work with wireless), there are still "no devices found" ?
Fortunately for you, I have finaly found a way to make it work, without buying anything else.
First, go see the following MacRumors topic :
http://forums.macrumors.com/showthread.php?t=1327396
Follow the instructions (and when I mean follow, I mean follow exactly !)
At the 9th step, you have to enter the information about your device to make your computer recognize the information (I say it the simpler way)
Each paragraph correspond to a specific kind of device. For example :
Feedback360.plugin</string>
</dict>
<key>IOClass</key>
<string>Xbox360ControllerClass</string>
<key>IOKitDebug</key>
<integer>65535</integer>
<key>IOProviderClass</key>
<string>IOUSBDevice</string>
<key>idProduct</key>
<integer>18264</integer>
<key>idVendor</key>
<integer>1848</integer>
</dict>
<key>BigBenController</key>
<dict>
<key>CFBundleIdentifier</key>
<string>com.mice.driver.Xbox360Controller</string>
<key>IOCFPlugInTypes</key>
<dict>
<key>F4545CE5-BF5B-11D6-A4BB-0003933E3E3E</key>
<string>360Controller.kext/Contents/PlugIns/
Correspond to the "BigBenController" device infomation with the product and vendor ID.
After the 10th step, copy the previously bigbencontroller paragraph, paste it between two devices (exactly like the others) and change that :
Feedback360.plugin</string>
</dict>
<key>IOClass</key>
<string>Xbox360ControllerClass</string>
<key>IOKitDebug</key>
<integer>65535</integer>
<key>IOProviderClass</key>
<string>IOUSBDevice</string>
<key>idProduct</key>
<integer>yourIDProduct</integer>
<key>idVendor</key>
<integer>yourIDVendor</integer>
</dict>
<key>TheNameOfYourDevice</key>
<dict>
<key>CFBundleIdentifier</key>
<string>com.mice.driver.Xbox360Controller</string>
<key>IOCFPlugInTypes</key>
<dict>
<key>F4545CE5-BF5B-11D6-A4BB-0003933E3E3E</key>
<string>360Controller.kext/Contents/PlugIns/
Finish the instructions and, if everything's right, it should workDePingus wrote:
I'm getting the same thing. Did you ever resolve this? I'm also using the wireless controller.
Also, how do I keep the green guide button from constantly blinking? And, how do you turn off the controller?
Thanks for the info!
And in case anyone cares, it works great with Cave Story. Just plug and play, no setup needed. Haven't tried it with anything else yet.
EDIT:
Found the answer to my own questions at...
http://www.gentoo-wiki.info/HOWTO_Xbox_ … controller
No info on the mouse thing tho.
Nope, haven't found any solution yet but I would love to do so! Dmesg gives:
usb 4-2: new full speed USB device using uhci_hcd and address 2
usb 4-2: configuration #1 chosen from 1 choice
input: Xbox 360 Wireless Receiver as /class/input/input6
input: Xbox 360 Wireless Receiver as /class/input/input7
input: Xbox 360 Wireless Receiver as /class/input/input8
input: Xbox 360 Wireless Receiver as /class/input/input9
usbcore: registered new interface driver xpad
xpad: X-Box pad driver
If there is anything else needed to help me, i'll get it.
Edit:
Got it working now, use this: http://wiki.archlinux.org/index.php/Get … ns_Working guide and then it works
Last edited by korkadapa (2008-11-23 20:44:07) -
Need help? Some of my Ipods are not recognized by Itunes with my Windows 8 PC. (Ipod Nano 4th gen and Ipod Nano 6th gen), but on my Windows 7 PC, they work fine. My Ipod 3rd gen and Ipod shuffle work both on Windows 8 and 7 PC's. On the non-working Ipods, the Device sync test says "No device found". Already performed all of the Ipod device troubleshooting including reload Itunes, stop start Ipod device, changed drive letter...
any help is appreciated. Chris4sailHello there, chris4sail.
The following Knowledge Base article offers up some great step-by-step instructions on troubleshooting your iPod not being recognized in iTunes:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
No Bluetooth Device found after BIOS Update
Product Name and No.: HP dv6516tx
Operating System: Windows XP
Error Message: No Bluetooth device found
Changes Made: Updated BIOS to most recent version F. 5A
System Information:
OS Name Microsoft Windows XP Professional
Version 5.1.2600 Service Pack 3 Build 2600
OS Manufacturer Microsoft Corporation
System Name UDAYMITTAL-PC
System Manufacturer Hewlett-Packard
System Model HP Pavilion dv6500 Notebook PC
System Type X86-based PC
Processor x86 Family 6 Model 15 Stepping 13 GenuineIntel ~1496 Mhz
BIOS Version/Date Hewlett-Packard F.5A, 3/22/2010
SMBIOS Version 2.4
Windows Directory C:\WINDOWS
System Directory C:\WINDOWS\system32
Boot Device \Device\HarddiskVolume1
Locale United States
Hardware Abstraction Layer Version = "5.1.2600.5687 (xpsp_sp3_qfe.080930-1426)"
User Name UDAYMITTAL-PC\Uday Mittal
Time Zone India Standard Time
Total Physical Memory 4,096.00 MB
Available Physical Memory 2.23 GB
Total Virtual Memory 2.00 GB
Available Virtual Memory 1.96 GB
Page File Space 4.83 GB
Page File C:\pagefile.sys
Problem Description:
Yesterday I updated my laptop's BIOS to F 5A - latest available on HP Website. Since then I have lost the bluetooth functionality, which was wroking just fine prior to the update. Now the system doesn't find a bluetooth device.
What I have already done:
1. Switched back to previous versions of BIOS (available on HP Website coz I didn't note the BIOS version before I updated it). - That didn't work.
2. Reseated the wireless card - Didn't work.
3. Manually checked the connection of bluetooth module to the motherboard - Connection was fine but it still didn't work.
4. Uninstalled the bluetooth driver and reinstalled it (HP integrated module WIDCOM) - still didn't work
5. Installed HP Wireless Agent - Didn't work
6. Installed HP Integrated module driver along with HP Wireless Agent - Didn't work
7. Installed Ubuntu to check if its recognizing the device - Even its not recognizing the device which it used to do earlier.
8. Sadly there's no BIOS setting in Setup which I can change to correct the bluetooth behaviour (Phoenix BIOS with limited interface).
After all the research, I am posting this because I am unable to find a sloution to this problem on my own. I request the members to please help.
UdayI got the bluetooth working. Had to dismantle the laptop and found that a small switch was loose.
-
Hi Again!
I posted this problem here before, but since I really need to access the sites that receive this error message in less than a month, I had to re-post; hopefully someone who didn't see it before will see it & have a solution for me.
Here are the details: I'm running windows 8.1 & I use Firefox 33.1.1, Pale Moon 25.1.0 or Opera 26.0 as my browsers, (I have IE installed & up-to-date, but I never use it). I followed the 10-point checklist on Adobe & everything was done, except for "uncheck Hardware Acceleration" in Flash 'Settings'; I tried to uncheck it on this site, where it's indicated, as well as in my 4 browsers when I'm doing something that uses Flash, but no matter how hard I try, I can't 'uncheck' the check mark in that tiny box! Since this error problem only affects 5 web sites, & I can watch streaming media on all other sites, I don't think it's an issue.
Here's how this problem began: I was watching a live, streaming nest-cam on 5/09/14 around 11:00AM, (yes, I DO know the exact time & date, because it happened so suddenly while I was watching this website that I'd been watching since the end of February, 2014), when my screen went black. I thought it was probably an Adobe Crash, but when the usual Crash Report window didn't show up, I just closed Firefox & reopened it, expecting to resume watching the nest-cam. When I went back to the site, I got the black screen with the "Error loading plugin: Plugin file not found" message. The chat portion on the site still works, though. I know there are other sites with this nest-cam feed, so I started trying them, but it took several tries for me to find one that didn't get the error message! I posted this problem on "Windows BBS" forum, & someone else posted that the same thing happened to them AND on the same sites! They didn't have a solution, either. I cleared my cache, rebooted my PC & even did a System Restore, but whatever happened in that brief second made using ONLY 5 sites impossible. Here are the sites that receive the error message:
http://pixcontroller.com/eagles, (but I CAN go to http://pixcontroller.com, but there isn't any streaming media)
http://cbslocal.com/eagles
http://westmorelandconservancy.org/BlueBirdwebcam-1.htm
http://wildearth.tv/cam/pittsburgh-bald-eagles, (I get the error message on ALL cams on this site)
http://aviary.org/BE-NestCam1 (I get the error message on ALL cams on this site)
Now if any videos from the 5 websites above are uploaded to YouTube, I can watch them perfectly...no error message if I watch the videos elsewhere. Luckily, I found Ustream, & they have most of the nest cams I watch, but I need to fix this issue, because it's nearing nesting time! I'm an amateur nest-watcher & it's vital that I have access to these 5 sites, so if anyone knows how to fix this, PLEASE tell me!
Thanks for taking the time to read my post.
All suggestions/solutions are gratefully accepted.
Thanks in advance for your help!
DogPalFile Not Found Error in Welcome Screen
07-Nov-2013 10:25
Tags: #dreamweaver_cs6_update
Help please!
Live preview also not working.
I have exactly the exact problem described below but do not have a folder with the same name as the volume created under the volume. Please can someone help - I've tried everything. This problem only happened when I upgraded to Dreaweaver CC!
"On launching Dreamweaver on your Macintosh if your Welcome Screen is not loading and if you see a "File not found" error, please check if you have a folder with the same name as your volume created under the volume. For more info on this please go through the attached pdf document. Other dialogs/panels in dreamweaver that will be blank due to this issue are Jquery Swatches panel, Adobe Edge Webfonts tab in Manage Fonts dialog,W3c Error Info dialog, Externalise Javascript dialog and svn revert dialog. After following the changes mentioned in the attached document please check all the affected dialogs/panels to confirm everything is working as expected."
Thanks,
Martin Bond
[personal information removed by moderator] -
Error message in Audition 2.0 when trying to burn a CD: no devices found
I am using Windows 7 and Adobe Audition 2.0. on a new laptop (Asus). When i try to burn a CD from the 'CD' workspace I get the error message 'no devices found'. I have burned other CDs on this machine separately from Audition so i know the Matsushita CD/DVD burner works. How do I get Audition to recognize the burner device? Thanks, Spintal
The one time this happened to me, it turned out it was the fault of a Windows update and doing a system restore back to the first state prior to that update fixed it.
From the number of times this crops up I suspect there are some other causes too--another thing I'd try is updated the drivers for the CD drive.
Bob -
i got my ipod touch 4th generation and when i first connected it to itunes it would say device found on my computer but on itunes it would say no device found so im stuck with the connect to itunes symbol on my ipod touch like when u first turn it on
Try here. Start with the one the best fits your symptoms.
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
iPod not recognized in 'My Computer' and in iTunes for Windows
iPod: Does not appear in Windows or iTunes and Device Manager is empty -
I got a new laptop and installed iTunes and plugged in my iPod but it won't get recognized on iTunes or in my computer, the computer says unknown device found and that the software was not successfully installed. What shall I do ? I tried reinstalling so many times and everything else I could find. Please help!
Hello MArk.wijesinghe,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Best of luck,
Mario -
No volume control elements and/or devices found
Hi, I recently installed Arch Linux and I followed the tutorials on how to configure it. At this moment I have Gnome installed and it is working fine, I only have one problem.
Every time if I try to access volume control I get the following error:
"No volume control elements and/or devices found"
I'm relatively new to Linux so it might be me just being stupid(Maybe I just don't have the right packages installed) but I've searched the web and I didn't find anything that could help, I also searched this site but there are only a few things about sound problems. I think the problem is caused because Linux is not detecting my sound card (its an on board sound card) or maybe I have not given the command to detect it/activate it. In Google I've found that 'lsmod' and 'lspci' commands are for detecting drivers, so I executed those in my terminal and put them here, I hope this might help fixing my problem.
Module Size Used by
ipv6 252608 8
nvidia 6828532 22
jfs 172540 1
ext2 57352 1
snd_seq_oss 29184 0
snd_seq_midi_event 6528 1 snd_seq_oss
snd_seq 46672 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 6796 2 snd_seq_oss,snd_seq
ppdev 7556 0
eth1394 16772 0
lp 9604 0
snd_intel8x0 28828 0
rtc 10416 0
ppp_generic 23444 0
snd_pcm_oss 39072 0
snd_mixer_oss 14464 1 snd_pcm_oss
sg 26652 0
usbhid 34592 0
hid 25088 1 usbhid
slhc 6272 1 ppp_generic
shpchp 29588 0
pci_hotplug 27976 1 shpchp
ff_memless 5256 1 usbhid
parport_pc 35940 1
tsdev 6336 0
parport 31176 3 ppdev,lp,parport_pc
i2c_sis96x 5124 0
i2c_core 17792 2 nvidia,i2c_sis96x
snd_intel8x0m 14476 0
snd_ac97_codec 91940 2 snd_intel8x0,snd_intel8x0m
ac97_bus 2432 1 snd_ac97_codec
snd_pcm 68484 4 snd_intel8x0,snd_pcm_oss,snd_intel8x0m,snd_ac97_codec
snd_timer 18820 2 snd_seq,snd_pcm
snd 43492 10 snd_seq_oss,snd_seq,snd_seq_device,snd_intel8x0,snd_pcm_oss,snd_mixer_oss,snd_intel8x0m,snd_ac97_codec,snd_pcm,snd_timer
pcspkr 2816 0
evdev 8192 0
ohci1394 31920 0
ieee1394 84056 2 eth1394,ohci1394
sis_agp 6404 1
agpgart 26200 2 nvidia,sis_agp
soundcore 6496 1 snd
snd_page_alloc 7816 3 snd_intel8x0,snd_intel8x0m,snd_pcm
8139too 22912 0
mii 4992 1 8139too
ext3 119688 1
jbd 55336 1 ext3
mbcache 7044 2 ext2,ext3
ehci_hcd 30092 0
sr_mod 14372 0
cdrom 34464 1 sr_mod
sd_mod 16768 5
ohci_hcd 18948 0
usbcore 115464 4 usbhid,ehci_hcd,ohci_hcd
ata_generic 5380 0
pata_sis 10508 4
libata 94100 2 ata_generic,pata_sis
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 651 Host (rev 01)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP)
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS962 [MuTIOL Media IO] (rev 04)
00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
00:02.3 FireWire (IEEE 1394): Silicon Integrated Systems [SiS] FireWire Controller
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
00:02.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0)
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] AC'97 Sound Controller (rev a0)
00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
00:09.0 RF controller: Advanced Micro Devices [AMD] Am 1771 MBW [Alchemy] (rev 04)
00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1)
Any help would be appreciated because this is getting very frustrating >_>
Last edited by NomenNescio (2007-04-28 10:50:10)ryurhrt wrote:
NomenNescio wrote:
Thanks for the help, didn't get the sound to work but yet because I kinda broke my linux(wont boot)>_>
Gonna reinstall it, things usually go better the second time.
make sure u have adding the user to audio group in order to access sound device.
gpasswd -a user audio
Yes, I think that was the problem. Anyways, I reinstalled Arch Linux and everything is working fine now. -
I turn on my mac without hearing the chime boot sound from Apple.. after that im always turning on my Motu (extermal soundcard firewire) i still got that message, by audio midi setup my Motu appears from some minutes and then goes away again.. The same time that my Motu appears i simply start a mp3 file to check if i got a sound but still no luck... Made all possible updates but still no sound.. I'm using Logic pro 9 and have lots of thing here to do.. Try also a hotline from Apple to call but im waiting like more than an hour and still no answer... Please any suggestions? I am afraid it can be a hardware problem
This problem came for the first time after i made an update in Avid Protools...
After that i tryed everything and still got no sound... Next step i FORMAT my Mac Pro.. Back everything UP and reinstall Lion and still '' NO OUTPUT DEVICES FOUND'', i performed a clean install.. Thats why i am afraid it can be a Hardware problem.. So, if anyone of you guys know something about it, please share your knowledge with me..
Thanks in advanceTry a different user account and see if the problem persists.
Maybe you are looking for
-
Regarding Creation of specific Application scenario..
Hii All, I am having a requirement where i have to create a application in which in FIRST view i m having a dropdown menu,from where i have select one parameter from dropdown menu, say for example there is list of countries in a drop down menu.when i
-
A Friend gave me her VAIO laptop.How can I remove her ITUNES library and use my library. Want to sync my Ipad and Iphone to My library.
-
ADF 11.1.2.3 integration with OBIEE
Hi. I see that OBIEE integration is at most 11.1.2.7 But I am on Jdeveloper 11.1.2.3. Is there an integration for 11.2.3?
-
I'm running FrameMaker 11 on Windows 7. I just changed the settings from unstructured to structured Frame and restarted my computer. Now FrameMaker comes up for a few seconds and goes away. Is there something I can do to get FrameMaker to launch?
-
Anyone able to use Last Pass with Safari ver. 6.0? Mine would not load and gave me an error message each time I opened Safari. I removed it and am not sure whether to reinstall it or not yet.