Xfce4 not detecting other partitions[SOLVED]
I have installed arch linux with xfce4, wine, java, libreoffice, opera and some other packages. The system is working well. However, I am not able to solve following problem:
The file manager is not showing other partitions of the disk drive. I think they can be added in /etc/fstab file but is it possible for system to detect them and show them so that I can mount them if I need to (as I have seen in other desktop environments like gnome on ubuntu and kde on slackware)?
I have tried to check the arch wiki (which helped a lot while installing all of the above) but not able to find solution. Please guide me in the right direction. I am really impressed by Arch linux and all the experts must have worked very hard to produce this fine distribution.
Last edited by rnarch (2012-04-10 14:03:09)
exec ck-launch-session dbus-launch startxfce4
It worked well. I can now access all partitions.
However, if I open thunar directly, I can see all partitions on the left sided pane. Here, I have to click to mount the partitions. This mounts but gives a message that I do not have permission to open this partition. Then I have to give command 'sudo thunar' . This instance of thunar does not show any partitions on the left sided pane but if I can open the /media folder and access all mounted partitions. Why does 'sudo thunar' does not show any partitions on left sided pane?
Similar Messages
-
How can I use Bluetooth it does not detect others iPhone
How can I use Bluetooth it does not detect others iPhone
The bluetooth functionality on the iPhone is limited. It's basically limited to audio devices (headsets, for instance), although certain apps allow greater functionality. Search the app store for "bluetooth share"
-
My iphone 6 dose not detect other devices via bluetooth?, it just keeps searching!
my iphone 6 dose not detect other devices via bluetooth?, it just keeps searching!
Hello,
Thank you for visiting Apple Support Communities.
I would need more information regarding what devices you are having an issue with to provide a better answer. However, most devices need to be placed in pairing mode before you will see them. Try going through the article below as it may help with this scenario.
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
Cheers,
Jason H. -
Is iphone 4 Having issues with Blue Tooth connectivity ? Last saturday i have bought up iphone 4, when i checked that device blue tooth was not detecting the other iphones. I went to apple store in Ottawa. They checked with their Mac computers. They said Yes this iphone is having problem. Please exchange it on the store you bought up. I have exchanged that iphone with brand new, again same issues...
iPhone is not detecting other devices with Blue Tooth. I have checked with other two. they having same problem.
Please tell me, What apple gonna do with my iphone now ? Should i keep it ? or cancel my contract with cell phone company. As i am sure they not going to replace it again or gonna make excuses.
Waiting for replies [email protected]I have upgraded my iphone 3 to a 4. I just recently discovered that while the iphone 3 automatically discovers bluetooth but the iphone 4 does not (couldn't discover any bluetooth). My bluetooth is Jabra SP200. It turned out, there are other steps to take with the bluetooth device to pair with the iphone 4. As stated, iphone 3 detected it automatically. But w the iphone 4, I had to press and hold the answer button of the Jabra for it to pair with iphone 4. Call the bluetooth manufacturer directly and check with their alternative pairing procedures.
Hope this helps. -
USB devices not detected in VMware [SOLVED; Using Virtualbox instead]
I am running Arch as a host and XP on VMWare workstation 7. My primary purpose of installing XP on VMWare was to use my edit my Line6 POD (behaves as a usb sound card) and get my USB TV Tuner box to work. The big problem that I am facing is that VMWare is not detecting any USB device (not even my USB Hard Drive).
I have the usb controller installed.
Any suggestions?
Last edited by devadittya (2009-11-24 20:04:45)I don't know vmware but with other virtual machines there is often a configuration option whether usb drives should be automatically mounted or not. Sometimes automounting also only works if the vm has the focus, i.e. is the active window.
-
Mu external hard disk partition is not working. In get info it says that "hou can read only" bow can I fix this?
Read this:
http://smallbusiness.chron.com/fix-permissions-imac-external-hard-drive-48257.ht ml -
Wifi card not detected with ifconfig (solved)
Hello,
I'm not sure wether I should post this here or not...
However, I'm using a Realtek Wifi card RTL8188CE on my laptop and I couldn't succeed in using it. (I'm using Arch x64, it's up-to-date).
I tried using ndiswrapper, but even when the ndiswrapper module is loaded and the driver properly created from the ".inf" file, ifconfig -a still doesn't display anything else than the usual "eth0" and "lo".
Here are the information I think are useful, please tell me if I forgot anything.
# lshw -C network
*-network NON-RÉCLAMÉ
description: Network controller
produit: RTL8188CE 802.11b/g/n WiFi Adapter
fabriquant: Realtek Semiconductor Co., Ltd.
identifiant matériel: 0
information bus: pci@0000:08:00.0
version: 01
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress bus_master cap_list
configuration: latency=0
ressources: portE/S:3000(taille=256) mémoire:f2d00000-f2d03fff
# lspci -vnn
08:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter [10ec:8176] (rev 01)
Subsystem: Realtek Semiconductor Co., Ltd. Device [10ec:9196]
Flags: bus master, fast devsel, latency 0, IRQ 7
I/O ports at 3000 [size=256]
Memory at f2d00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
Capabilities: [160] Device Serial Number 01-91-81-fe-ff-4c-e0-00
# lsmod | grep ndiswrapper
ndiswrapper 231163 0
usbcore 139496 5 uvcvideo,ndiswrapper,xhci_hcd,ehci_hcd
# ndiswrapper -l
net8192ce : driver installed
device (10EC:8176) present
net8192cu : driver installed
Thanks in advance and please tell me if anything is missing !
Regards,
Alfred
Last edited by Alfred456654 (2011-04-03 16:15:06)Hello,
I finally solved my problem. It turns out my driver existed on the AUR and all I had to do is load the corresponding module with modprobe.
Some useful links :
https://wiki.archlinux.org/index.php/Wi … _Supported
https://wiki.archlinux.org/index.php/Co … ice_module
Also here is the very same topic on the french forum where I was helped solving my problem (hopefully google is gonna be able to translate it) :
http://forums.archlinux.fr/topic7887.html -
HT204387 MY IPHONE 4 DOES NOT DETECT OTHER BLUETOOTH DEVICES
SUDDENLY MY DEVICE HAS STOPPED DISCOVERING OTHER BLUETOOTH DEVICES ! PL ADV
Check the documentation for the Jawbone and put it in discovery mode. Turn bluetooth on for the iPhone and the Jawbone should show up on the phone. More than likely it will then ask for a passcode and that should be in the documentation as well. After that, they should be paired.
Use this link to go to the Jawbone ERA site if you need instructions on pairing. Select pairing with your phone and there is information on how to get the headset into pairing mode and the passcode.
Message was edited by: ChrisJ4203 -
GRUB not detect SSD with win8.1
I've always used syslinux. But now I have to use GRUB. I have two SSD, SSD have a UEFI windows 8.1 SSD and other have Arch with grub. The grub did not detect the partition Win8.1. What can I do to make GRUB detect win8.1?
Greetings and thanks.Ok, i try,, but not detect.... i try:
if [ "${grub_platform}" == "efi" ]; then
menuentry "Microsoft Windows Vista/7/8/8.1 UEFI-GPT" {
insmod part_gpt
insmod fat
insmod search_fs_uuid
insmod chain
search --fs-uuid --set=root $hints_string $fs_uuid
chainloader /EFI/Microsoft/Boot/bootmgfw.efi
fi
what parameters i change?
SSD with efi partition:
Disposit. Start Final Size Tipo
/dev/sdb1 2048 616447 300M Windows recovery environment
/dev/sdb2 616448 821247 100M EFI System
/dev/sdb3 821248 1083391 128M Microsoft reserved
/dev/sdb4 1083392 468860927 223,1G Microsoft basic data
Last edited by coellobranco (2014-06-12 14:56:35) -
5th generation ipod not detected by my windows xp. works fine on other pc. performed necessary steps to remove and reinstall itunes but having same issue. is there a driver i can download to pc then direct to that specific location when installing?
I have a similar issue - my iPod nano connects and is visible in Device Manager yet invisible in My Computer and iTunes. I've tried everything I can possibly think of to try and solve this myself, all in vain.
Mine is a nano 4G. I've been using it for quite some time without the slightest problem. I have been using WINAMP instead of iTunes to manage my darling nano.
Then, one fine day I bought a new computer and the nano would not show up in My Computer, though the nano display shows "Do not disconnect". On my old computer it worked (and still works) absolutely fine with win XP as well as with win7 (the later I currently use on my new/problematic computer, which I bought last summer and that's how long I've had this problem).
Of course, after several first attempts I gave up and installed iTunes. I've tried using the Apple support article "iPod not recognized in 'My Computer' and in iTunes for Windows":
- reset
- fully charged,
- cable works fine on two other computers
- in normal or disk mode makes no difference
- tried to find anything useful in the diagnostics mode
- reinstalled iTunes several different times since then to the latest version
- I've unplugged every other USB device except for my mouse and keyboard and tried several different USB ports on my motherboard (USB 3.0 and conventional), as well as trying different USB- related options in my BIOS.
- I've never used any Mac with this ipod
- I've tried fiddling with the win7 Services by stopping and restarting them and of course
- uninstalling the iPod drivers in Device Manager. After such an uninstall the ipod would automatically be recognised and "ready for use", i.e. being invisible in My Computer.
- Attempted to find any possible third-party conflict with msconfig or the possibility that my ipod is being confused for a network drive (for which I've disconnected my HDD, leaving only my SSD with the OS).
Sometimes, iTunes would note that iPod service (or something, can't remember exactly) failed to install properly and asked to try and repair it. I would click YES! and voila - no change! The ipod would rarely show up in iTunes on my problematic computer like this:
iTunes would warn me that the nano would need restoring so I would try and do it on my haunted machine upon which iTunes would freeze like you seen in the picture.
Despite this, I've updated and restored the nano on my father's computer to the latest version without any problems. This though, did not solve my problem in any way.
I can load music to my nano through my old computer (which for me is a real pain and hassle) and the gadget works normally in terms of its disconnected functionality.
I've taken my nano to the local service for repair and they said it was fine. Mercifully, they didn't charge for the diagnostics service (gee, thanks for not ripping me off!).
Here are two screengrabs from my Device Manager
and Devices and Printers screens on my comp:
That is my sad story as far as I can remember. It's most likely something with the drivers or something along those lines though I'm out of ideas at this point.
If you think you have any idea PLEASR HELP, I'M DESPERATE! -
[Solved] Hard Disk not detected
Currently i am using 4 hard drives and out of which 2 hard drives are detected and 2 are not. The fasinating thing is that in BIOS all the 4 hard drivers are detected and using a live cd i can access all the 4 drives without any prob. All the 4 drivers are working properly in windows7. It's just in arch linux 2 of my drives are not detected.
Recently i have upgraded my system from kernel 3.6.9 to 3.6.10
the drives are SATA drives. they are connected directly to the motheboard using SATA cables. the live cd i used was Ubuntu. I checked in /sys/block/ and with lsblk. In both of them i can see 2 drives sda and sdb.
Even check the dmesg, but there was nothing related to sdc or sdd. even on boot there were no errors.
They are NTFS formatted and always the 2 same disks are detected.
pls guide me as i am really freaked off due to this prob.
Last edited by creative2innovative (2012-12-26 05:37:55)ewaller wrote:
How about rebooting, and then posting the output of dmesg. It will be long, so be sure to use BBCode 'code' tags. Alternately, install wgetpaste; pipe the output of dmesg through wgetpaste, and post the link wgetpaste provides here.
Edit: Never mind I see you updated with solved while I was posting. But what is the solution?
Thanks ewaller for the reply The prob was that, the capacity of my SMPS ( power unit ) was not sufficient to run 4 HDD + printer + 2 TB external drive. So this was the main reason. When i disconnected the printer and the external drive again all the 4 HDD were detected in my arch machine -
*SOLVED* Device not detected/ No driver installed for X-FI Fatal
OK!!!! the only reason I signed up here was to post that I have (for me) solved my problem.
Before I get into details this occurred on a fresh system with latest drivers for hardware used.
The problem was installing my X-Fi card on my 680i m/b (striker extreme).. when I would install the driver it would simply crash the computer and when it started up the hardware was not detected to used the software and the device manager said no driver installed.. I tried everything.. I installed the driver in safe mode (yay it worked without crashing) then I booted for windows only to have it blue screen for a second and restart... repeating the cycle.. so i reinstalled windows again... I tried installing the driver different ways in windows.. nothing worked... I gave up...
BUT!!!
today while i was at work I decided I would try one last thing.
this is what got it going. I have SLI 8800ultras that covered the PCI slot on the bottom of my board and I though I would try the card in this slot to see if it worked there... so I disabled SLI took out my bottom card put in the sound card in the bottom slot, installed the driver... It installed 00% no crash... even better it worked after the restart!!!... so then I had to test if it worked in the top slot so I powered down, moved it up to my top PCI slot and windows auto set the driver for it (as it was already installed) It worked in the top slot now... Finally I put in the second 8800 to make sure it worked with this slot in use... It still worked fine with SLI enabled. because I was unhappy with the mess I made installing drivers all the time as I did with the many crashes I decided to do a fresh install of windows making this card work from the start so here is what you need to do if you have a 680i board with SLI. this is exactly what i did with my fresh install.
install only one GPU card..
Put the X-FI in a different slot that isn't giving you problems
Install windows
Install service pack 2
install your chipset drivers
install sound card drivers
power down, change sound card to permanent slot
test - power down
put in the second GPU card
install GPU drivers
Good luck you all having this problem.. I hope my solution helps you.
BryanI think I?got a similar?problem earlier today when I was messing around with?onboard audio?that I later removed and after unplugging a?USB headset.
Have you checked the device manager, is there any higlighted hardware that has a exclamation mark next to it.
I fixed the issue by simply uninstalling the WDM device with the exclamation mark and restarted. -
[SOLVED] k3b does not detect optical drive
Hello,
I am running Arch Linux x86_64 with recent updates. I have k3b 2.0.3 and when I launch it I get message that it does not detect my optical drive, and I need hal daemon. I checked, udev is running, node in dev /dev/sr0 has root.optical, my user is in optical group. How do I fix this? I want to burn BluRay disk, maybe k3b even does not support it? And is there a better tool for optical discs than k3b? I use KDE 4 so Qt tool would be nice
Last edited by adomas (2015-01-09 17:34:05)[EDIT] I think problem is solved. Not sure how, but after reboot it works now
Thank you for you reply, Lone_Wolf
Permissions seems to be ok:
[adomas@voidbox ~]$ ls -l /dev/sr0
brw-rw---- 1 root optical 11, 0 Jan 9 21:18 /dev/sr0
[adomas@voidbox ~]$
And about dependencies I think I have what I need:
[root@voidbox adomas]# pacman -Qi k3b
Name : k3b
Version : 1:2.0.3a-1
Description : Feature-rich and easy to handle CD burning application
Architecture : x86_64
URL : http://sourceforge.net/projects/k3b/
Licenses : GPL
Groups : None
Provides : None
Depends On : kdebase-runtime libkcddb libsamplerate libmad ffmpeg taglib libmpcdec libdvdread cdrkit
libxft
Optional Deps : dvd+rw-tools: for dvd burning support [installed]
vcdimager: for vcd burning support
transcode: for advanced mpeg conversion support
emovix: for bootable multimedia cd/dvd support
cdrdao: for disk-at-once (DAO) mode support [installed]
cdparanoia: for cd ripping support
Required By : None
Optional For : None
Conflicts With : None
Replaces : None
Installed Size : 33.81 MiB
Packager : Eric Belanger <[email protected]>
Build Date : Thu 06 Nov 2014 05:21:31 AM EET
Install Date : Wed 07 Jan 2015 07:28:57 PM EET
Install Reason : Explicitly installed
Install Script : Yes
Validated By : Signature
[root@voidbox adomas]#
What else can be a problem? By the way may optical drive is external, connected via USB, if it makes any difference.
Last edited by adomas (2015-01-09 17:33:50) -
PC and phone not detecting each other
Basically I tried to connect my mother's n70 to my computer (vista Ultimate 32bit) using the CA-53 cable. However I was just given the prompt unknown device installed, and PC Suite was not detecting anything. So basically I had no choice but to just abandon it and try to connect my phone (5800) to the PC. However, the phone now does not detect being connected to the PC, and Ovi Suite cannot detect the phone as well. Trying it out on PC Suite, it gives me the error "No connection type available, wizard will now close" or something along those lines.
Its the first time this has happened to me so I have no clue. I've already tried repairing, and uninstall reinstall but still nothing.
Advice would be appreciated.
Oh yeah, anyone knows of a way to get a hold of the actual files of the messages and contacts synced to Ovi Suite?
If you find my post helpful please click the green star on the left under the avatar. Thanks.
Solved!
Go to Solution.My laptop doesnt have bluetooth, and I dont have a dongle. However its not cable, as I have three cables here (2 CA-101, and a CA-101D), and they all dont work.
Anyway, I found a fix here about using PC Suite cleaner, I found one which was compatible with PC Suite 7, and now they can find the USB ports. The problem now is the phone still doesn't detect the connection. Oh well. I'll just try to give it a reset. I have a recent backup anyway.
EDIT: never mind. After the PC Suite reinstallation where they started finding the USB ports again, and I just turned off my mobile for 5 min without the battery, I tried connecting it again and the drivers started installing. Thanks for the time anyway.
If you find my post helpful please click the green star on the left under the avatar. Thanks. -
[Potentially Solved] Touchpad sometimes not detected possible IRQ.
Edit:
Potentially solved: since adding the below entries to my bootloader I have not encountered the issue, or it may be just a coincidence.
append to the boot line: i8042.nomux=1 i8042.reset
I've been experiencing an issue for the last few years which has bugged me across two different brands of laptop, but has been very hard to debug due to how random the event seems to occur.
One in every 20 or so boots, the touchpad on my laptop (Lenovo Z500) is not detected; not just by X, but by the system as a whole, it's as if it has been physically disconnected somehow.
It will take a few good reboots for the system to detect it again, and the problem disappears for another few days/weeks
One strange thing I have noticed, is that when looking at the listing of interrupts during a 'failed touchpad boot', IRQ 12, which I believe is normally the touchpad, has vanished.
I'm not very clued up on these matters so I'm not sure how to start debugging this, and working out if the issue is down to my setup of the system or not.
Any ideas on what could be causing this?
Thanks.
Output of /proc/interrupts during a working boot:
CPU0 CPU1 CPU2 CPU3
0: 23 0 0 0 IO-APIC-edge timer
1: 16 723 9 10 IO-APIC-edge i8042
8: 0 0 0 1 IO-APIC-edge rtc0
9: 299 118 10 14 IO-APIC-fasteoi acpi
12: 845 21415 146 77 IO-APIC-edge i8042
16: 461 8993 74 44 IO-APIC-fasteoi ehci_hcd:usb1
17: 0 0 0 0 IO-APIC-fasteoi ath9k
23: 2 25 5 1 IO-APIC-fasteoi ehci_hcd:usb2
41: 5 22 0 2 PCI-MSI-edge xhci_hcd
42: 1557 1065 596 500 PCI-MSI-edge ahci
43: 11 2 0 0 PCI-MSI-edge mei_me
44: 266 0 0 0 PCI-MSI-edge snd_hda_intel
46: 4 28 26 1 PCI-MSI-edge i915
NMI: 0 0 0 0 Non-maskable interrupts
LOC: 3002 12958 2572 1842 Local timer interrupts
SPU: 0 0 0 0 Spurious interrupts
PMI: 0 0 0 0 Performance monitoring interrupts
IWI: 88 170 115 197 IRQ work interrupts
RTR: 1 0 0 0 APIC ICR read retries
RES: 367 332 393 431 Rescheduling interrupts
CAL: 129 71 24 58 Function call interrupts
TLB: 99 72 157 892 TLB shootdowns
TRM: 0 0 0 0 Thermal event interrupts
THR: 0 0 0 0 Threshold APIC interrupts
MCE: 0 0 0 0 Machine check exceptions
MCP: 2 2 2 2 Machine check polls
THR: 0 0 0 0 Hypervisor callback interrupts
ERR: 0
MIS: 0
Output of /proc/interrupts during a non-working boot:
CPU0 CPU1 CPU2 CPU3
0: 23 0 0 0 IO-APIC-edge timer
1: 9 235 2 11 IO-APIC-edge i8042
8: 0 0 1 0 IO-APIC-edge rtc0
9: 217 44 24 40 IO-APIC-fasteoi acpi
16: 96 2512 38 173 IO-APIC-fasteoi ehci_hcd:usb1
17: 0 0 0 0 IO-APIC-fasteoi ath9k
23: 3 25 1 4 IO-APIC-fasteoi ehci_hcd:usb2
41: 6 23 0 1 PCI-MSI-edge xhci_hcd
42: 1445 937 649 479 PCI-MSI-edge ahci
43: 9 3 0 1 PCI-MSI-edge mei_me
45: 11 10 4 39 PCI-MSI-edge i915
46: 93 80 94 0 PCI-MSI-edge snd_hda_intel
NMI: 0 0 0 0 Non-maskable interrupts
LOC: 1251 3465 1964 692 Local timer interrupts
SPU: 0 0 0 0 Spurious interrupts
PMI: 0 0 0 0 Performance monitoring interrupts
IWI: 76 97 47 79 IRQ work interrupts
RTR: 1 0 0 0 APIC ICR read retries
RES: 349 252 190 335 Rescheduling interrupts
CAL: 110 72 30 69 Function call interrupts
TLB: 101 52 817 651 TLB shootdowns
TRM: 0 0 0 0 Thermal event interrupts
THR: 0 0 0 0 Threshold APIC interrupts
MCE: 0 0 0 0 Machine check exceptions
MCP: 2 2 2 2 Machine check polls
THR: 0 0 0 0 Hypervisor callback interrupts
ERR: 0
MIS: 0
Output of /proc/bus/input/devices during a working boot (touchpad detected at bus 0011):
I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/devices/platform/i8042/serio0/input/input0
U: Uniq=
H: Handlers=kbd event0
B: PROP=0
B: EV=120013
B: KEY=402000000 3803078f800d001 feffffdfffefffff fffffffffffffffe
B: MSC=10
B: LED=7
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input2
U: Uniq=
H: Handlers=kbd event1
B: PROP=0
B: EV=3
B: KEY=10000000000000 0
I: Bus=0019 Vendor=0000 Product=0005 Version=0000
N: Name="Lid Switch"
P: Phys=PNP0C0D/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
U: Uniq=
H: Handlers=event2
B: PROP=0
B: EV=21
B: SW=1
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
U: Uniq=
H: Handlers=kbd event3
B: PROP=0
B: EV=3
B: KEY=10000000000000 0
I: Bus=0019 Vendor=0000 Product=0000 Version=0000
N: Name="Ideapad extra buttons"
P: Phys=ideapad/input0
S: Sysfs=/devices/platform/VPC2004:00/input/input5
U: Uniq=
H: Handlers=kbd rfkill event4
B: PROP=0
B: EV=13
B: KEY=1400800100c03 400000000300000 0 0
B: MSC=10
I: Bus=0010 Vendor=001f Product=0001 Version=0100
N: Name="PC Speaker"
P: Phys=isa0061/input0
S: Sysfs=/devices/platform/pcspkr/input/input7
U: Uniq=
H: Handlers=kbd event5
B: PROP=0
B: EV=40001
B: SND=6
I: Bus=0003 Vendor=13d3 Product=5170 Version=0730
N: Name="Lenovo EasyCamera"
P: Phys=usb-0000:00:14.0-4/button
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/input/input9
U: Uniq=
H: Handlers=kbd event6
B: PROP=0
B: EV=3
B: KEY=100000 0 0 0
I: Bus=0001 Vendor=10ec Product=0269 Version=0001
N: Name="HDA Digital PCBeep"
P: Phys=card0/codec#0/beep0
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input8
U: Uniq=
H: Handlers=kbd event7
B: PROP=0
B: EV=40001
B: SND=6
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH Mic"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input10
U: Uniq=
H: Handlers=event8
B: PROP=0
B: EV=21
B: SW=10
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH Headphone"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input11
U: Uniq=
H: Handlers=event9
B: PROP=0
B: EV=21
B: SW=4
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH HDMI/DP,pcm=3"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input12
U: Uniq=
H: Handlers=event10
B: PROP=0
B: EV=21
B: SW=140
I: Bus=0011 Vendor=0002 Product=0007 Version=01b1
N: Name="SynPS/2 Synaptics TouchPad"
P: Phys=isa0060/serio1/input0
S: Sysfs=/devices/platform/i8042/serio1/input/input6
U: Uniq=
H: Handlers=event11 mouse0
B: PROP=5
B: EV=b
B: KEY=e520 10000 0 0 0 0
B: ABS=660800011000003
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=LNXVIDEO/video/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:35/LNXVIDEO:00/input/input13
U: Uniq=
H: Handlers=kbd event12
B: PROP=0
B: EV=3
B: KEY=3e000b00000000 0 0 0
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=LNXVIDEO/video/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:03/input/input14
U: Uniq=
H: Handlers=kbd event13
B: PROP=0
B: EV=3
B: KEY=3e000b00000000 0 0 0
Output of /proc/bus/input/devices during a non-working boot:
I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/devices/platform/i8042/serio0/input/input2
U: Uniq=
H: Handlers=kbd event0
B: PROP=0
B: EV=120013
B: KEY=402000000 3803078f800d001 feffffdfffefffff fffffffffffffffe
B: MSC=10
B: LED=7
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input3
U: Uniq=
H: Handlers=kbd event1
B: PROP=0
B: EV=3
B: KEY=10000000000000 0
I: Bus=0019 Vendor=0000 Product=0005 Version=0000
N: Name="Lid Switch"
P: Phys=PNP0C0D/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
U: Uniq=
H: Handlers=event2
B: PROP=0
B: EV=21
B: SW=1
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
U: Uniq=
H: Handlers=kbd event3
B: PROP=0
B: EV=3
B: KEY=10000000000000 0
I: Bus=0019 Vendor=0000 Product=0000 Version=0000
N: Name="Ideapad extra buttons"
P: Phys=ideapad/input0
S: Sysfs=/devices/platform/VPC2004:00/input/input6
U: Uniq=
H: Handlers=kbd rfkill event4
B: PROP=0
B: EV=13
B: KEY=1400800100c03 400000000300000 0 0
B: MSC=10
I: Bus=0010 Vendor=001f Product=0001 Version=0100
N: Name="PC Speaker"
P: Phys=isa0061/input0
S: Sysfs=/devices/platform/pcspkr/input/input7
U: Uniq=
H: Handlers=kbd event5
B: PROP=0
B: EV=40001
B: SND=6
I: Bus=0003 Vendor=13d3 Product=5170 Version=0730
N: Name="Lenovo EasyCamera"
P: Phys=usb-0000:00:14.0-4/button
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/input/input8
U: Uniq=
H: Handlers=kbd event6
B: PROP=0
B: EV=3
B: KEY=100000 0 0 0
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=LNXVIDEO/video/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:35/LNXVIDEO:00/input/input9
U: Uniq=
H: Handlers=kbd event7
B: PROP=0
B: EV=3
B: KEY=3e000b00000000 0 0 0
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=LNXVIDEO/video/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:03/input/input10
U: Uniq=
H: Handlers=kbd event8
B: PROP=0
B: EV=3
B: KEY=3e000b00000000 0 0 0
I: Bus=0001 Vendor=10ec Product=0269 Version=0001
N: Name="HDA Digital PCBeep"
P: Phys=card0/codec#0/beep0
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input11
U: Uniq=
H: Handlers=kbd event9
B: PROP=0
B: EV=40001
B: SND=6
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH Mic"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input12
U: Uniq=
H: Handlers=event10
B: PROP=0
B: EV=21
B: SW=10
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH Headphone"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input13
U: Uniq=
H: Handlers=event11
B: PROP=0
B: EV=21
B: SW=4
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH HDMI/DP,pcm=3"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input14
U: Uniq=
H: Handlers=event12
B: PROP=0
B: EV=21
B: SW=140
Last edited by kYd (2014-07-01 18:11:45)Hi gav989,
welcome to the forums. Please have a look at our forum etiquette, esp. at the "Pasting Pictures and Code" section.
The image you posted is too big, but only slightly, so I leave it there for now. You may want to look at these screenshot posting rules as well.
Maybe you are looking for
-
In device manager it shows an error code 32' using iPhone 5 related to Apple Tv I believe is when this started, I am thinking I can DL the file and install biut I am not sure how to properly do this. Also I use my LTE to tether (paid) to my LapTop as
-
I need to use my iPhone for Facetime, without the phone having cellular service. How can I do so?
-
HT2486 address book won't open
Address Book won't open last 4 days. It is OPEN but I cannot use it. Rt click SHOW ALL WINDOWS and I see Address Book and my contacts are there. I click on Address Book and it Disappears ie- Minimizes back to an ICON in teh DOCK. Can't find a solutio
-
What is the difference between Adobe CS6 vs. Adobe CC? I have some Adobe CS6 and downloaded some of the the latest CC of the same programs. Do I use both? Do I get rid of one?
-
Cant download any apps on my ipad
cant download anything cause it says the security code does not match after i have used it many times