Xfce4 Panel craps out, when trying to remove a panel

Hey, I have the newest xfce, and the panel quits when I try to remove a panel...
This is the error I get from gdb:
Program received signal SIGSEGV, Segmentation fault.
0x00002b7fe697558c in g_type_check_instance_cast ()
from /usr/lib/libgobject-2.0.so.0
This is really frustrating, and any help would be much appreciated, let me know if you need any more information...
Thanks, Jonny

Hey,
I tried to edit it, and every time I restart xfce4 it just writes a new file over the one I make. So it displays the panel still...
Thanks, Jonny
Last edited by fsk141 (2007-10-19 19:04:20)

Similar Messages

Newbie question: Why is "learn sound model" greyed out when trying to remove background sounds in a file using the Spectral Frequency display?

I am trying to remove background sounds in a file using the Spectral Frequency display. The first edit on a new file, this process works fine:
1. use brush to cover sound
2. right click, learn sound model
3. effects/noise-reduction-restoration/Sound Remover
The next time I try to remove another sound in the file, "learn sound model" is greyed out. I have to close the file and reopen to be able to make another edit. What on earth is going on? Can it only learn one sound model or something?
I'm a newbie, so thanks in advance for your advice!

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

FATAL Error... When trying to remove Apple Mobile Device Support (AMDS).

FATAL Error... When trying to remove Apple Mobile Device Support (AMDS) on my windows xp. I tried to update iTunes to update my iPhone software and it told me to uninstall iTunes and AMDS for a newer version. Now I get a fatal error and I can't sync my phone. What should I do?

FATAL Error... When trying to remove Apple Mobile Device Support (AMDS) on my windows xp.
We've made some progress with some of those in recent days, Stop. It looks like (with some of them), the trouble is caused by trouble with the HKEYCURRENTUSER registry keys associated with your usual XP user account.
If that's what is afoot, the following technique may be of some assistance.
Head into your User Accounts control panel and create a new user account with full administrative rights. Log out of your normal account and log into the new account. (Don't use fast user switching to move between accounts.)
Inside the new account, head into your Add or Remove Programs control panel, and attempt to uninstall AMDS from there.
Does the uninstall go through without the fatal error in the new user account?
If so, *staying in the new user account,* do a complete uninstall of iTunes and related componentry as per:
[Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP|http://support.apple.com/kb/HT1925]
(You'll need, in particular, to do the reinstall of iTunes from inside the new account. Experience of the last two cases of this indicates that if you try the reinstall from inside the usual user account, AMDS just silently fails to install.)
If everything seems to have reinstalled correctly, log out of the new account, and log back into your usual account. Try launching iTunes in your usual account. Does it launch properly in there now?

Receiving an error when trying to remove P00 Security role from the user

Hi All,
I am receiving an error when trying to remove P00 Security role from the user.
After logging on to GRC CUP, clicking on u201CCreate requestu201D, and filling out required information,
I click on Select Roles/Groups
On the next screen,
I click on Existing Roles/Groups
ERROR MESSAGE appears X Action failed and no roles appear in the box to select for removal.
Regards,
Vineet

Hi Vineet,
My be your selection is incorrect
Try this
in Applicaiton Area -- Select ALL
Functional Area -
Select ALL
Company -
Select ALL
Role/Profile/Group Names --- Give p00* and execute the report
if you give only p00 it wont give any result
Hope this helps
Thank you,
Kishore

When trying to remove a partition on my hard drive I couldn't

when trying to remove a partition on my hard drive I got an error and the option was grayed out in boot camp assistant. error message: "The startup disk cannot be partitioned or restored to a single partition. startup disk must be formatted as a single Mac OS Extended (Journaled) volume or already partitioned by Boot Camp Assistant for installing Window".

I am going to revise my question to this. If I compress my itunes folder which would save me a considerable amount of space will this make the music and apps information stored in there unsyncable?

Time out when trying to open Word/Excel document from portal

Several of our users have been timing out when trying to open/download documents stored in our portal.
The error message is "Download failed. Connection to server was reset."
Is there some obvious setting that I am missing here?
It happens with things as small as 200K - Word and Excel documents.
thanks!!

Hi Gary Jiang,
Thanks for posting in MSDN forum.
This forum is for developers discussing issues about
apps for Office.
Based on the description, it seems that you got an issue when you deploy the code sample. If I understood clearly, I suggest that you contact the author of the code sample from the "Q and A" tab.
Also if you have the question about WOPI, I suggest that you get more effective response from
Office
Protocols forum.
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

ITunes store keeps saying that my session has timed out when trying to buy a product from the store

I Tunes is telling me that my session has timed out when trying to buy a gift voucher, which i have done many times before.
The most recent change i'v made to my computer before this happened was to download an update (MacOSX updatecombo 10.7.3dmg)
a couple of weeks ago. I'v turned off the firewall as suggested whilst trying to transact and turned it back on again, but don't know
what else to try. The problem is three days old as i left and came back to it to see if there might be a glitch in the system.
I'v been able to access the credit i have in the store, but not buy the itunes voucher to email to my own a/c. Please help someone if you can
Sandystone.

Thanks for your suggestion Ned01, I tried this as a last ditch attempt, unfortunatly it made no difference in my case, but i'm pleased it did for you. However, because you reminded me to have another go at this problem, i tried something else (which i'd unsucsessfuly tried before), that is, i deleted the 'CLICK & SAVE " a/c i'd set up recently, and reverted to my previous payment me and would you know it , this time it worked !! I set up a trail purchase and it worked.
It seems to me that other poeple with this problem have to solve it by trail and error, but thank you for your help.Sandystone..

Error received when trying to remove a BW bookmark

Hello All,
When trying to remove a BW bookmark with hierarchy for the Month/Year the following error is received: "System error in program SAPLRRK0 and form SORTING_PRUEFEN_01-04-"
Please advise.
Regards,
Keith

Not answered

HT4972 iTunes times out when trying to download iOS 5.1

iTunes times out when trying to download iOS 5.1 - can anyone help? Can I download via a browser and then install that way?
Looking here http://osxdaily.com/2012/03/07/ios-5-1-download/ - I can download an ipsw file - how would I get that to install on my iPhone4?
Help!
Cheers
P.S. My iPhone4 is on Orange UK - is this a GSM one? or CDMA???

Hi,
Tap Settings > General > Reset > Reset Network Settings
Now restart your iPad. Hold the On/Off Sleep/Wake button down until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.
If that didn't help, you need to post in the iPad forum here.
This is the forum for Safari for the Mac OS X.

ADSL Broadband keeps dropping out when trying to u...

Hi, hope someone can offer some advice please.
Our connection seems to have got a lot slower over the last few months (about 2.64 on a very good day) and now keeps dropping out when trying to use either the laptop or PS3. I have followed the advice on the self help guide and tried changing the ADSL filter, moved the hub away from the telephone, re-booting the hub and tried using it directly in the test socket and none of these have solved the problem. I have done a line test from work and it says there are no problems with the line??? I am getting really annoyed as we only have the phone line so we can use the internet so are paying over £40 a month for service we cant even use. I get the impression that as there are so many users on ADSL where I live (we dont have fibre optic yet) that it is too much for the exchange and that BT are upping peoples connections when they complain thus making other peoples worse (we had this problem about a year ago and complained and it was ok for a while)
Could this be true? Or am I just thinking too much in to it? And does anyone have any suggestions on how I could resolve the problem? I have had a bad experiance with being charged for an engineers visit in the past (eventually refunded) so would like to avoid having to get them involved if possible.
Thanks in advance.

you post the adsl stats from your router may need to 'show detail' to get all stats (if hub enter 192.168.1.254 in your browser and navigate to adsl or use a-z, if netgear enter 192.168.0.1) and run btspeedtester (MAC users may have problems) http://speedtester.bt.com or http://bt.custhelp.com/app/answers/detail/a_id/9354/c/346,4740,5520 and post the results .
Someone may then be able to offer help/assistance/suggestions to your problem
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Am working with trial version of photoshop elements 12. Layer functions remain grayed out when trying to use.

I'm working with trial version of Photoshop Elements 12. Layer functions remain grayed out when trying to use them.

You need to have an image open in the main window.

Share tab is greyed out when trying to export in FCPX - cannot export - I would like a real answer in plain english! Thank you!

The share tab is greyed out when trying to export from Final Cut Pro X
Please help with a REAL answer in plain English.
Thank you!

Thank you Tom!
I checked every clip -
Trashed preferences too.
Finally, I took your advice and backed-up my events and projects.
Trashed Final Cut Pro X
Downloaded a new copy from FCPX from the app store (from my previous purchases)
Restarted FCPX
Opened my event
Moved to the timeline - and now!
The SHARE tab works!
Every aspect of FCPX is working faster as well.
Go figure?
Thanks again!
Allan - olvblock

'Vintage' MacBook has lost all wifi connection suddenly and stored settings. I've tried to manually input my IP address and DNS number but it just times out when trying to connect to the network can anyone help?

'Vintage' MacBook has lost all wifi connection suddenly and stored settings. I've tried to manually input my IP address and DNS number but it just times out when trying to connect to the network can anyone help?

You said:
We still couldn't get it to stop timing out. I tried to download the firmware from iClarified but iTunes said it didn't recognise the software.
Just what did yo do to gt iTunes to see the download:

Error when trying to remove logical systems using SALE

Hello,
We are trying to remove obsolete entries from the logical system name table using transaction SALE. When doing this, for some entries, I am getting a message:
The logical system GB1MATDEV is still used in distribution model SUBSYSTEMS (client 010).
Confirm that the logical system GB1MATDEV is really no longer used. Delete it first from distribution model SUBSYSTEMS (client 010), then delete it here.
So in client 010, I tried to delete the entry from the distribution model (t-code BD64), and I get another message:
Action cannot be carried out on the nodes selected.
It seems that I am stuck. Any ideas on how to resolve this?
Regards,
Michael Dube

Dear Michael
"So in client 010, I tried to delete the entry from the distribution model (t-code BD64), and I get another message:
Action cannot be carried out on the nodes selected."
You need to delete the lowest possible node first, if you select the top node you get this type of error.
You need to expand the node and then delete the smallest part of the node first and work your way up until you can delete the node itself.
<removed_by_moderator>
Kind regards
Tom

Problems when trying to remove clicks/pops

I am trying to remove some clicks/pops and have strange problems:
I change to spectral view and zoom in very much, so the click is about 2 cm wide on my screen, so I can select part of it. Then I go to favorites and choose "Autom. Korrektur" (I have the german version, in the english version it's probably called "Repair Transient" or "Auto Heal"). So far it works fine.
But it happened now several times that after saving (this is important, it only seems to happen right after I save), after using "Autom. Korrektur" for the next time, audition has a problem and the wave file looks garbled. Can anyone else confirm this behavior?

>It's inconsistent to say the least. In most European languages except british, the decimal delimiter is a comma.
Yes, it is a bit inconvenient having the decimal and multiple delimiters the wrong way around, isn't it? And I think that everybody else's use
is wrong - the OS and vast majority of software apps are written in the
lingua franca - QED... but read on, because even I'm prepared to admit that it's not quite that simple, and in all honesty, I don't
really see why a lot of people should have to change the habits of a lifetime - even if they're bad ones!
>Perhaps Adobe should get hold of some beta testers outside the US
They have... most major European countries are represented, one way or another. And yes, there have been complaints about a load of keyboard-related stuff in the past. Unfortunately Adobe have managed to cock this whole thing up even when it was working properly before - as anybody playing with previous scripts with point delimiters will tell you! So, it's not really a beta test problem
per se - it's simply a matter of whether Adobe choose to act on what beta testers say, and that's a whole different ball game; they are not obliged to take any notice of us at all if they don't want to. I have no idea why some things get fixed and other things don't, but in this case it's not because it hasn't been spotted, believe me.
And yes, this all has to do with multiple language versions, and I think very specifically to do with using a language version with the keyboard settings for another country. Sometimes, and with some software, this solves problems - but just as often, it seems to cause even more. But yes, I believe that installing the software using a consistent keyboard layout for the country code you are using generally works - although not always... and yes, Adobe should be consistent, and just as importantly spell out the pitfalls in the installation procedure; this might reduce the frustration somewhat too.

Xfce4 Panel craps out, when trying to remove a panel

Similar Messages

Maybe you are looking for