Xfce4 startup unreadable error

I decided to install arch linux, so I followed the beginners guide. I first updated the system with pacman. Then I installed xorg and the ati opensource drivers. After that I installed ttf-ms-fonts, ttf-dejavu, ttf-bitstream-vera, and finally xfce4. I edited the ~/.xinitrc file and uncommented startxfce4. Now when I run either startx or startxfce4 I get a unreadable error message that looks like a dialog from xfce4. It just looks like a bunch of boxes and a cancel button not readable. The only thing to do at the error is to hit enter, I then get another choice error I guess that is unreadable. I Finally get a dialog that is unreadable telling me it is closing I guess because of the close icon. It then takes me back to console. There are no EE errors in xorg.0.log file but In console it says
dbus_g_proxy_call: assertion 'DBUS_IS_G_PROXY (proxy)' failed" a few times and xfconf_init() must be called before attempting to use libxfconf
Last edited by user name (2009-07-10 16:16:08)

http://bbs.archlinux.org/viewtopic.php?id=70812
http://bbs.archlinux.org/viewtopic.php?id=30607
hope this helps

Similar Messages

Startup Plug Error

Hi All,
    I have 2 sample applications say Exportex1 and Exportex2.
When I deploy exportex1from one machine and check for output, it is working fine as expected. When I deploy exportex2 from another machine, it is also working fine.
But Exportex1 is giving startup plug error when I log in into portals after the deployment of exportex2 application.
I find that Exportex2 is somehow overrides the Exportex1 application which means i can view only one application at a time in the portal.
Error:
RunTime Exception or StartUp Plug not found exception.
What could be the reason for this?
The application Name - Exportex1 , Exportex2
Project Name - Exportex1   , Exportex2
component Controller - Exportex ,   Exportex
Pls suggest.
Regards,
subashini.

Hi Ayyapparaj,
They are pointing to their corresponding interface views. But the component controller name is same for all the applications say Exportex1 and Exportex2. Will it make any problem?
Ex:
Application Name: Exportex1,   Exportex2
Component controller Name : Exportex, Exportex
Regards,
Subashini.

Cannot import CDs into iTunes, disc is corrupted and unreadable error.

Cannot import CDs into iTunes, keep getting disc is corrupted and unreadable error. Advice would be much appreciated. Thanks in advance!

Thanks for the reply!
I downloaded the program and ran it, got to the point where it says I have errors that need to be fixed... but it appears I have to pay for the rest of the program to actually repair these errors. Is this incorrect?
If I do have to pay, then I'd like to look for an alternative... the program is $40; of course, that's cheaper than buying a new iPod, but I want to avoid that too.

Startup config error after upgrading to ASA from PIX

Hey guys. I get the following startup-config errors when reloading our ASA. A pix->asa conversion was just done on it. The ASA is currently running 8.2(5), and I am trying to get ready to update it to the most stable release, and wanted to make sure all my ducks are in a row. What is going on with the "will be identity translated for outbound"? This is part of the VPN configuration, and I understand nat0 is saying to not nat it. Is this something that I should be worried about? The ASA is not in production currently.
Let me know if you need further information
Thanks,
.........nat 0 10.37.0.116 will be identity translated for outbound
*** Output from config line 406, "nat (inside) 0 10.37.0.1..."
nat 0 xx.xx.xx.xx (PUBLIC IP) will be identity translated for outbound
*** Output from config line 431, "nat (inside) 0 xx.xx.xx..."
Line 406
nat (inside) 0 10.37.0.116 255.255.255.255
Line 431
nat (inside) 0 xx.xx.xx.xx (PUBLIC IP) 255.255.255.255
Corresponding global
nat (outside) 0 access-list outside_inbound_nat0_acl outside
nat (inside) 0 access-list inside_outbound_nat0_acl
ACL
access-list outside_inbound_nat0_acl extended permit ip 172.16.16.0 255.255.255.0 any
access-list inside_outbound_nat0_acl extended permit ip any 172.16.16.0 255.255.255.0
access-list inside_outbound_nat0_acl extended permit ip 10.37.0.0 255.255.0.0 172.16.16.0 255.255.255.0
access-list inside_outbound_nat0_acl extended permit ip 172.31.0.0 255.255.0.0 172.16.16.0 255.255.255.0

Hi,
I would imagine that there is no problem as the firewall has not given any kind of error message.
I do personally wonder sometimes why is it so (atleast in the 8.2 softares etc) that the firewall shows a message on the CLI when you are for example configuring a "global" / "nat" command pair.
I wonder if this falls into the same category.
The configuration format for NAT has stayed pretty same leading to the 8.2 softwares. I'm not totally sure what software you are going to go for but you seem to have the latest 8.2 series software so next steps are already 8.3 / 8.4 / 9.0 / 9.1
ALL of the above mentioned softwares introduce a completely new NAT configuration format to the ASA. While the ASA automatically converts the configurations its not always 100% process not to mention that the NAT configuration probably is far from optimal.
- Jouni

NI-FBUS Process Startup: Fatal Error

I installed PCI-FBUS card, NI-FBUS COMM SW for Windows v 3.2.1 (CM and Configurator) on my Windows XP, activated the licenses and enabled the PCI-FBUS board through Configuration Utility. When I started NI-FBUS Communication Manager, I got the following error:
"NI-FBUS Process Startup: Fatal Error
Initialize request to Board 0 timed out, NI-FBUS may not be receiving interrupts from board. Check your board IRQ settings with the NI-FBUS interface configuration utility. NI-FBUS will not Exit."
All the settings in the Configuration Utility were set to default. The NI-FBUS Communication Manager will only run successful if H1 interface board properties is set to "Polled Mode." How do I fix this issue?

Hi, I asked the guy who developed NI-FBUS 3.2. They told me this is a history problem, when Windows OS is upgraded to XP or above, the IRQ mode is not suggested to use any more. So from the NI-FBUS 4.0, they removed IRQ mode supporting. It is strongly recommended using poll mode in NI-FBUS software.

**SOLUTION** DLLML.exe Fails to load at startup (application error)

Hello everyone!
I purchased the SB X-Fi Fatalty Champion Edition soon after release, and think this is the best card I have ever used to date. Absolutely love it, unbelievable sound.
Now a year or two ago I noticed a certain file failing to load when I started windows.
This file, DLLML.exe. To my understanding this file is used to load EAX emulation support into older games/modules (essential loads a "middle-man" file between the game's sound files/.dll's, and the hardware SPU [Sound Processing Unit, not a real acronym, but that's what I call it since GPU and CPU are similar distincti've acronyms so if you see it used anywhere, it came from me ] to allow EAX support in non-EAX enabled games), and/or to add EAX effects in your audio files using the Wave Studio app.
I've pinpointed this issue to either a Windows Update, or the Creative auto-update (which could mean it is an error caused by an installaion combination of multiple apps at once) because this issue did not arise until I did these two things (did Windows Update, then Creative Auto-Update, then restarted computer).
Now I've primarily had this issue with Windows XP x64 but I have had this issue at times with Windows XP x86 as well.
After you install the software suite, it adds an entry in your Windows Startup to load the module (Start/Run. msconfig. Startup tab. Look for STARTUP ITEM: DLLML). The entry looks like this:
WinXPx86 looks like: "C:\Program Files\Creative\Shared Files\Module Loader\DLLML.exe" RCSystem * -Startup
WinXPx64 looks like: "C:\Program Files (x86)\Creative\Shared Files\Module Loader\DLLML.exe" RCSystem * -Startup
Under most circumstances this module loads fine, but because Creative, for reasons why I have not delved into, loads some of their DLL files differently than the Windows standard, which may also be a cause of this issue (extremely unlikely, I believe it is one of the 2 things i mentioned above).
Either way, after I did those 2 things, the DLLML.exe startup entry failed to load every time.
But I fixed it.
Now what you have to do to resolve this issue, involves editing the startup entry in the Windows Registry.
If you are scared to go into it, have no idea what I am talking about, or never edited the Registry before, don't worry. If you follow these steps EXACTLY, you have nothing to fear.
I will be using default installation parameters for file pathing, so if your Operating System is installed in a different dri've letter other than C:\, then just change the letter to the one your OS is installed onto.
Capitals used for emphesis on actions to take:
-Hit the START button, then select RUN
--------If RUN is not in your start menu, you need to enable it by right-clicking and open area of your TASKBAR, select PROPERTIES. --------Click the START MENU tab, then the CUSTOMIZE button. Click the ADVANCED tab. In the START MENU ITEMS box, scroll down to the entry that says SHOW RUN. Check the checkbox to fill it. Then OK/APPLY/OK, and you should be back to the desktop. Then go to START/RUN
-type the word REGEDIT
--------This opens the Windows Registry.
--------DO NOT change ANYTHING in this other than the exact directions I specify or you may corrupt your registry or even worse, corrupt your system, which means F&R time (Format & Reinstall). Treat it like a stripper. You can look all you want but don't touch or there could be dire consequences.
--------Now the fastest way to find this is to manually navigate to the specific "key" or "entry" you need to modify. Mouse-click the +'s to navitage further into the "hi've" following these maps:
-FOR WINDOWS XP x86 USERS NAVIGATE TO: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Run
-FOR WINDOWS XP x64 USERS NAVITAGE TO: HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432\Microsoft\Wind ows\CurrentVersion\Run
--------Now you are looking for a specific entry NAME called RCSYSTEM. Depending on which version you are running. They are:
-FOR WINDOWS XP x86 USERS: "C:\Program Files\Creative\Shared Files\Module Loader\DLLML.exe" RCSystem * -Startup
-FOR WINDOWS XP x64 USERS: "C:\Program Files (x86)\Creative\Shared Files\Module Loader\DLLML.exe" RCSystem * -Startup
-------Now we are going to edit the entry. What we need to do is get rid of that * (asterix) character in the name. I don't know why it is there, I'm thinking it may be a coding error. But in my WinXPx64, this was the culprit.
-Double-click the RCSYSTEM key to edit it, and edit it so it looks EXACTLY LIKE THIS (If you're paranoid about doing something bad, COPY and PASTE this line pertaining to your installed OS. KEEP IN MIND THE INSTALLATION DRIVE LETTER, CHANGE FIRST LETTER IF NESCESSARY)
-FOR WINDOWS XP x86 USERS: "C:\Program Files\Creative\Shared Files\Module Loader\DLLML.exe" RCSystem -Startup
-FOR WINDOWS XP x64 USERS: "C:\Program Files (x86)\Creative\Shared Files\Module Loader\DLLML.exe" RCSystem -Startup
-click OK button. Now it is changed.
-------And we're DONE EDITING the Registry entry!
-now go to FILE in the top-left menu, then select EXIT
-RESTART your computer
-------You should not receive the "DLLML.exe failed to load" (application error) again!!
To check to see if it loaded into your system properly (as if not getting the error message anymore was proof enough it loaded properly), when you reboot back to the desktop, do the "three-fingered salute" (ctrl-alt-delete), then select the PROCESSES tab. Click on the IMAGE NAME heading to sort it alphabetically, and look for the name (WinXPx86) DLLML.exe or (WinXPx64) DLLML.exe *32.
If you see it listed, it loaded!! CONGRATS, IT BE FIXED!!
If this did not work for you, then your system is posessed, get a priest. I don't think a witchdoctor would give your comp good vibes O_o
Hope this resolved it for you. Enjoy your EAX with Duke Nukem 3d again!
EDIT: As a side note, I also noticed that since after this fix, my computer doesn't hang after sending the restart/shutdown killsignal, so I am wondering with people having similar hanging issues, if their issue could be resolved something similar to this.
Just a thought for any admins/mods/users out there that know what they are doing that maybe wanna test that out.
Sincerely,
Jason Ostapyk
3yr degree, MCP, CCNA, A+ certified, Specialised Electrician Class M Licensed

G Kudos for a brilliant finding! After a Windows Hotfix on my XP SP3, when shutting down my PC I would wait for a program and then get an error that EAX was not responding before finally shutting down. On next reboot I lost sound on my PC. After running tests, the Direct Sound test failed pointing at EAX.
This solution cured the problem. Again, kudos, job really well done!!!

G4 450 and protools, somehow ran out of memory to startup. Error code 10. Tried turning off extensions to boot but now just locks up as I tried a HD verify/repair and then moved the folder to the desktop screen. cant get it off now.froze.

Ok, I have a Mac g4, os9. ..450 Processor. I Think I upgraded ram, can't remember. Maybe a 512 card. Added an 80 gig internal HD for music storage. Computer was solely used for protools LE 5. I knew I was kinda close on my memory for running the program after recording things with plug ins etc. It was beginning to get slow at startup. Anyway it's been a couple years since I used it. I got it set up yesterday and it wouldn't launch and kept giving me error code 10. So I replaced the battery and tried again. the small finder icon in middle of screen would then pop up and alternate with a "?". Then it would change to a pict of a hard drive disk and then a me alternating "?". It would still give me the error code if I clicked on anything. So I then held down the shift key to turn off extensions as it had mentionEd to do a couple times. Still would give me the error code on my home page. If I tried to get into my hd which is on desktop it would give me the message, but somehow it did open one occasion and I went into it and scrolled to disk verify and repair. Did it. Said things were fine. I then saved the results in a file which was then offered along with location. I chose desktop. Probably really bad idea in hind sight.. It did it, but now no matter if I turn extensions off, the home screen pops up but then goes blank. The hard drive icon along with the new folder, and my protools icon immediately dissapear. And it freezes. at one point a message did pop up saying finder could not start up because there is not enough memory available. I'm not a computer guy. Ive tried finding the guy who helped me set this thing up 10 years ago but to no avail. If I can be guided to somehow uncover some of the unneeded memory usage I would then learn how to more efficiently use it. How the heck do I even start. I can't get to a screen which shows what's eating my computers space to even start getting rid of unneeded stuff. Please help if you can. I have so much to loose if I can't get it to work. Btw...I no longer have the os9 disk. I think it was tossed 10 years ago or more. May not even have my original pro tools disks anymore. Uggh.

Ouch, tough spot, but offhand I'd say some memory may have gone bad, or maybe just needs re-seating after all this time.
Not much you can do, but try this anyway...
PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/ht1379
In fact, do 3 in a row, takes a bit of time.

Startup disk error message

I keep getting an error msg that my startup disk is full and to close programs. I get the msg even when Safari is the only thing open, and my hard disk is only half full. I show that I have 340gb left available. Any help is appreciated. Thanks.

Katie,
Before you do anything else, please take your machine to a Apple Store, you have 3 free months of care and they will assist you, perhaps you can take some classes how things work.
Tell them you only had the computer for two weeks and the startup disk says it full, and you've deleted some items, they will know what to do.
Your startup disk shouldn't have gotten so full so fast, something is clearly wrong and you need help in person, we can't assist you here I'm afraid as you don't know very much at this point.
Ask about getting AppleCare and a TimeMachine drive, they will fix your machine right up.
Good Luck Katie.

Unreadable Error Message While Transferring Photos

Hi. Wonder if anyone can give me some ideas about what may have gone wrong while trying to transfer photos from the SD card in my Kodak DX6440 Digital Camera into iPhoto 6 in the Mac Mini.
I have visited the support pages for the Kodak camera, the Kingston SD card, as well as Apple's pages for iPhoto for some clues, but haven't found anything.
Here is the set-up. Have this wonderful 1.25 GHz PowerPC G4, with 1 GB of RAM, Mac Mini with the latest updates installed. Photo library still in the 40 GB internal with 15 GB still available.
The DX6440 Kodak camera has the latest firmware.
So far, until today, this Apple computer experience has been rather blissfully trouble free. (Even with this event, I have felt no where near the kind of frustration that my Windows machine regularly generates!)
Here's what happened: put camera on dock and pressed button to import pictures into iPhoto. IPhoto 6 comes up and recognizes camera no problem. Begins importing the photos and succeeds in importing the first 15 or so of the 187 before stalling. By "stalling," I actually mean IPhoto seems to be working on something for a little while and then presents an error message saying that the rest of the pictures are "unreadable." I tried starting over and importing the photos several times without success even trying to after quitting and restarting iPhoto, doing a shutdown and rebooting the Mac Mini, taking out and putting the card back in the camera while it was off and disconnected from the computer. None of these have helped. You should know several addition items: iPhoto stops on the same picture and does import it but with varying degrees of completeness ie. may be only the top 50% of the picture or the top 70% of the same picture each time I have tried to import all of the photos. I would have deleted this troublesome image and moved on if it wasn't just about the best one of the whole group! All images can be viewed on the screen of the camera, no problem. Yes, this is the first batch of photos I took using this brand new Kingston 512 MB SD card. Before this and while leading that blissful Apple computer life, I had been using a SanDisk 256 MB SD card in the camera. (Kodak support pages says that the camera can handle SD cards ranging from 8 to 512MB. Glad I didn't buy that 1 GB SD card I was looking at.)
Additional information: I connected the camera to my windows 98 machine and of course, while it tried to prepare to import the pictures it froze/crashed. Ha ha ha.. had to unplug, reboot, watch it chide me for not shutting down properly and scan disk. When I rebooted the win98 computer I had a brainstorm and used this computer as a guinea pig, not risking my beloved Mac Mini. Ha ha ha. Okay, sorry. I plugged the camera in directly into the usb, not using the dock and it loaded into "my computer." Opened and then clicked on each file and imported them one at a time into Kodak Easyshare program. The point of my evil window-rabbling is the images could be read as files and photos just fine and came up in viewer no problem. Even the image that had been imported only partially in iPhoto came up fine and complete. I even burned two photo CD's and imported the photos easily into iPhoto on the Mac Mini this way.
Here are my questions: Could the new SD card be corrupting only the importing process since the photo files themselves seem to be readable afterall? If I had forgone the dock and connected the camera directly to the Mac Mini, would it have mounted on the desktop and then could I have opened the pictures in preview and clicked and dragged either one or all of the images into iPhoto and have it work this way? Would it have worked clicking and dragging the images directly on to the iPhoto icon in Tiger's dock, without the use of preview? Would repairing permissions make a difference? This last probably not the thing as it killed the window98 computer as well, but hey. Is there anything else that I am overlooking?
Any ideas, even if just brainstorming, would be very much appreciated as I always like to know more about things, so I am better prepared next time. Thank you so much for perservering through this long post!- WP.

Hi, WP. Looks like the trouble you're having seems to be iPhoto losing access to your card. I'm just guessing here, but considering that you get through the same number of photos each time before iPhoto complains that the pictures are unreadable, it sounds like the camera has been turning itself off or sleeping.
If there's a way to connect the camera directly via USB or something, you could try and see if iPhoto sees the mounted card and is able to import from it. A good way to also check your pictures for "readability" is to look at them via Image Capture - it lets you browse the photos if you click Download Some. Then you can confirm that the other photos are readable.
I'm sure image capture and iPhoto use the same services of the OS to download pictures, so if one works the other should. Maybe you should try and time the download - see if iPhoto "loses" the card exactly at the same time?
Maybe the easyshare's own software can talk to the camera and keep it awake, while iPhoto assumes the camera knows to stay awake? My directly connected cameras never sleep while importing.

Macbook Pro Startup Disc Error Message

I keep getting the "Your Mac OS X startup disk has no more space available for applications memory" error statement, but, even after deleting around 60% of my files, it still keeps giving me that, and some of my applications won't open. I don't really know much about computers, but I've done everything I can think of + some online suggestions, but nothing has worked so far. What should I do?
In case it helps, it is a 13 inch screen, and I bought it in early 2010.

It says I have 0 KB for Audio, Movies, Photos, Apps, and Backups (which is definitely not true for any of these), and Other has 249.11 GB.
I have tried scanning for viruses, restarting my computer, and a few other vague things that didn't really seem to apply to my situation but were the best I could find. I also tried updating my computer but it said there wasn't enough space. And sometimes something about virtual memory comes up, but I assume it's just part of the same issue? And what is this "Other" stuff?

Startup Disk Error

I'm getting startup disk almost full error and unable to import pics to Iphoto library. What should I do?

For the Mac Pro 65 lb tower (the forum where you originally posted) or for a MacBook pro?

Startup disk error requesting Force Quit Applications

What is the solution for the error message " Your Mac OS X startup disk has no more space available for application memory"? I still have over 600GB of memory left. My computer is also running very slow but will still open applications.

I'm not an expert on memory, but it sounds like you need more Ram Memory. The 600 GB is your hard drive space left.
I'm not sure how the computer allocates how much virtual memory is usable by programs. Open your activity monitor and look at your memory usage. You might also check the pageout section. If you use a lot of the hard drive space for application memory, then the page outs will be extremely high.
A computer restart should clear out some of the memory issues for a short time.

Problems upgrading to Panther on imac getting startup disk error -2

Hello all, I recently got a used imac(400Mhz, CD, 10gb hdd, firewire, OS9.1) but unable to install Panther. It keeps giving me an error that Startup could not start from CD(-2). I've searched Apple support and Google but haven't found any good answers. I've made sure that firmware 4.1.9 is installed. Thanks in advance for any help.

Can you boot any other Mac from that CD?

System/Application startup causes error -2147220712 (and others)

I have a developed a .NET logging application (in C#) using DAQmx and an NI USB-6210 board all running under XP Pro. All works fine when the application is launched after the host PC system has been running for some time.
I have now put a shortcut to the application in the Startup folder so that it is launched as part of the system boot (The system is set to run the account containing the Startup folder immediately on boot). I now get the following error message.
NationalInstruments.DAQmx.DaqException: (Hex 0x80040318) Internal error: The client has failed to connect to the configuration server, possibly because the server is too busy or has run into a communication error. Please note the steps you performed that led to this error and contact technical support.
Status Code: -2147220712
   at nNIMSSAIL100.StatusObserverT<nNIMSSAIL100::ApiTraits<nNIMSSAIL100:otNetApi> >.CheckWithName(StatusObserverT<nNIMSSAIL100::ApiTraits<nNIMSSAIL100:otNetApi> >* , tCaseInsensitiveBasicString<unsigned short\,_STL::char_traits<unsigned short>\,_STL::allocator<unsigned short>\,nNIDMXS100::tLocaleConsideringWideStringComparitor\,nNIDMXS100::tLocaleConsideringWideStringCaseForcer>* pName)
   at NationalInstruments.DAQmx.DaqSystem.get_Devices()
i.e. it fails at the first DAQ call in the application at the statement
                 string[] devices = Daqsystem.Local.Devices;
that I'm using to determine if the hardware device I want to use exists on the system.
My guess is what is happening is that my application is starting before the NI configuration server and the other underpinnings of the DAQmx interface have completed their startup activity.
I also have to insert waits of several seconds AFTER this call succeeds , i.e after the device I want appears in the return string from the call before I can execute calls like
                myTask.AddGlobalChannel(cD.globalChannelName);
to prevent 'resource not available' type errors from this call. Even after the device name is returned there are clearly other startup activites going on.
I suppose I could catch each DAQmx call exception, wait and retry until I get success all the way though this configuration stage of my application, or put a big 'worst case' delay in at the start to allow the NI code to do what it has to do, but that's a kludge at best.
Is there any other coding mechanism or call that I can use from my application that indicates that DAQmx and all its underpinning NI code is up and running and ready for use?
Regards,
Malcolm Sharp

I am having a similar issue, however, waiting for 15 mintues before starting the program with a try/catch loop does not solve the problem. I am using four computers to test the issue with windows 7: a laptop running x64, laptop running x86, desktop running x64, desktop running x86. All computers are executing the exact same build of the application, and all have the most current version of Daqmx installed. Both of the desktops don't have the issue, but both of the laptops cannot find connected devices (I am only using a USB-6008), and the following exceptions are being thrown:
------------------------------------------------------------------------------Exception 1
Exception Message:     Internal Software Error occurred in MIG software. Please contact National Instruments Support.
Task Name: _unnamedTask<0>
Status Code: -229771
Exception Source:      NationalInstruments.DAQmx
Exception Stack Trace:    at nNIMSSAIL100.StatusObserverT<nNIMSSAIL100::ApiTraits<nNIMSSAIL100:otNetApi> >.CheckWithName(StatusObserverT<nNIMSSAIL100::ApiTraits<nNIMSSAIL100:otNetApi> >* , tCaseInsensitiveBasicString<unsigned short\,_STL::char_traits<unsigned short>\,_STL::allocator<unsigned short>\,nNIDMXS100::tLocaleConsideringWideStringComparitor\,nNIDMXS100::tLocaleConsideringWideStringCaseForcer>* pName)
   at NationalInstruments.DAQmx.Task..ctor()
Exception Target Site: Void nNIMSSAIL100.StatusObserverT<nNIMSSAIL100::ApiTraits<nNIMSSAIL100:otNetApi> >.CheckWithName(nNIMSSAIL100.StatusObserverT<nNIMSSAIL100::ApiTraits<nNIMSSAIL100:otNetApi> >*, nNIDMXS100.tCaseInsensitiveBasicString<unsigned short\,_STL::char_traits<unsigned short>\,_STL::allocator<unsigned short>\,nNIDMXS100::tLocaleConsideringWideStringComparitor\,nNIDMXS100::tLocaleConsideringWideStringCaseForcer>*)
------------------------------------------------------------------------------Exception 2
Exception Message:     MAX: (Hex 0x80040318) Internal error: The client has failed to connect to the configuration server, possibly because the server is too busy or has run into a communication error. Please note the steps you performed that led to this error and contact technical support.
Status Code: -2147220712
Exception Source:      NationalInstruments.DAQmx
Exception Stack Trace:    at nNIMSSAIL100.StatusObserverT<nNIMSSAIL100::ApiTraits<nNIMSSAIL100:otNetApi> >.CheckWithName(StatusObserverT<nNIMSSAIL100::ApiTraits<nNIMSSAIL100:otNetApi> >* , tCaseInsensitiveBasicString<unsigned short\,_STL::char_traits<unsigned short>\,_STL::allocator<unsigned short>\,nNIDMXS100::tLocaleConsideringWideStringComparitor\,nNIDMXS100::tLocaleConsideringWideStringCaseForcer>* pName)
Exception Target Site: Void nNIMSSAIL100.StatusObserverT<nNIMSSAIL100::ApiTraits<nNIMSSAIL100:otNetApi> >.CheckWithName(nNIMSSAIL100.StatusObserverT<nNIMSSAIL100::ApiTraits<nNIMSSAIL100:otNetApi> >*, nNIDMXS100.tCaseInsensitiveBasicString<unsigned short\,_STL::char_traits<unsigned short>\,_STL::allocator<unsigned short>\,nNIDMXS100::tLocaleConsideringWideStringComparitor\,nNIDMXS100::tLocaleConsideringWideStringCaseForcer>*)
Also, I have noticed that both National Instruments software, as well as the application I am building require internet access permission by my firewall in order to find the devices. I have tried both enabling access for all National Instruments software and my application, as well as disabling the firewall altogether, both to no avail. On top of the present exception issue, is there any way to prevent the daqmx driver from requiring internet access by a firewall in case a user disables access and cannot figure out the cause of the problem?
Thank you,
Matt

After Effects crashes on startup - Various Errors - Windows 7 64bit

AE CC 2014 13.1.1
Windows 7 64bit
12 GB Ram
Intel Xeon CPR W3680 @ 3.33 GHz 3.33 GHz
Hyper-threaded 12 cores
NVIDIA Quadro 2000
After effects on startup crashes constantly on me. I get various errors, the newest is error code 1268; D_MCp_SetupExporterModule
Sometimes it is a dynamic link error, and sometimes there is errors.
If I actually get it to open and work, I'm usually OK until I close the program. At that point there is almost no way I'm getting back in without a reboot.
I've worked on this same machine for three years and had pretty good luck with every version of AE since 5.5.

If you're not on Service Pack 1 for Windows 7, you need to get it. SP1 is a minimum system requirement to run 13.1

Xfce4 startup unreadable error

Similar Messages

Maybe you are looking for