Xfce4 will not lock screen after resume from hibernate/suspend

There have been a lot previous threads about this issue.
I cannot fix it. Furthermore, it's somewhat confusing.
Since this is a single user system (literally), I can get away with a systemd powered hack:
[Unit]
Description=Lock screen before switching power state
Before=sleep.target
[Service]
Type=oneshot
ExecStart=/usr/bin/sudo -u gebruiker xscreensaver-command -lock
[Install]
WantedBy=sleep.target
Is this a bug? Anyone who can report this functionality works?. I have:
xflock4 installed and working
xscreensaver installed and working
systemd working properly
no errors in ~/.xsession-errors
both config items ticked in
- xfce4-session
- xfce4-power-manager
Anyone?

Anyone who can report this functionality works?
Using the first option from the xscreensaver wiki article:
[Unit]
Description=Lock X session using xscreensaver
Before=sleep.target
[Service]
Type=oneshot
ExecStart=/usr/bin/xuserrun /usr/bin/xscreensaver-command -lock
[Install]
WantedBy=sleep.target
...in conjunction with:
both config items ticked in
- xfce4-session
- xfce4-power-manager
...and fade to and fade from disabled, works here for me.

Similar Messages

  • Usb gone after resume from hibernate (since update?)

    Hello!
    Since a recent update, my wireless usb stick's interface isn't available any more after resume from hibernate. Removing it and connecting it to a different USB port does not help.
    lsusb says, the device itsself is there.
    I can see it being removed / added when I connect it to a different usb port.
    The only interface iwconfig / ifconfig list is "lo" though. No wlan0 available.
    No idea what to try next... any hints?
    thx!
    Last edited by whoops (2012-03-20 06:22:01)

    Have there been issues with updates?
    A while after that, my usb mouse/keyboard stopped working after resume, too.
    Then after a few days, wifi started working...
    Then usb input started working again...
    Now usb input devices stopped working again -.-
    I think there were updates (kernel, too) every time the behaviour changed... not sure though...
    Still no idea what to do.

  • USB Mouse / Keyboard doesn't work after resuming from hibernate

    I am using a USB device that splits out to 2 PS2 ports, one for a mouse, one for a keyboard. It works great, but when I put my X61 into hibernate, the mouse and keyboard do not work when I resume from hibernate.
    I installed all the relevant patches and power manager drivers from the driver downloads page, but my mouse still doesn't work.
    Can someone point me to the correct download or shed some light on this?
    Thank you!

    I have this same problem with this same device. It is a "composite USB device".
    What I've notice is that the problem happens mostly with USB 1.1 ports. When the device is connected to a USB 2.0 port the problem doesn't happen always.
    It depends on the computer though. I added a PCMCIA USB 2.0 adaptor to my laptop that has USB 1.1 only. And when I connect the USB-to-PS/2 cable to the USB 2.0 my mouse sometimes work after suspend/hibernate but sometimes doesn't.
    However, on my other desktop computer, which has integrated USB 2.0 ports, this problem has never happened (I haven't tested it exhaustively though).
    This is a Windows bug of course. Everything related to USB 1.1 support is buggy in Windows. One more example is the annoying (and possibly catastrophic) "Delayed write error" that appears when you use a external hard drive plugged to a USB 1.1 port.
    I guess M$ is focusing their efforts on making USB 2.0 to work well and they have forgotten about USB 1.1. Or it could a problem related to "USB composite devices", hard to know.
    Message Edited by getfree on 02-22-2009 03:19 PM

  • Hibernation: Lock screen after resuming

    Hi,
    I managed to get hibernation running with the help of the Howto in the Arch wiki, but when resuming I don't have to type in any password, so my system is completely unprotected when hibernating.
    What would I have to do that the gnome-screensaver gets activated after resuming from hibernation?
    Thanks for any hints.

    Actually currently I have to hibernate my computer by executing the 'hibernate' command, but I would like to do it through gnome-power-manager but it doesn't work.
    I found the following in /var/log/user.log.
    Sep 2 17:58:30 mir gnome-power-manager: (mo) Hibernating computer because user clicked hibernate from tray menu
    Sep 2 17:58:31 mir gnome-power-manager: (mo) A security policy in place prevents this sender from sending this message to this recipient, see message bus configuration file (rejected message had interface "org.freedesktop.Hal.Device.SystemPowerManagement" member "Hibernate" error name "(unset)" destination ":1.9") code='9' quark='dbus-glib-error-quark'
    Sep 2 17:58:31 mir gnome-power-manager: (mo) Resuming computer
    Sep 2 17:58:31 mir gnome-power-manager: (mo) hibernate failed
    What can I do?
    Last edited by schallstrom (2007-09-02 16:02:38)

  • Fan Control fails after resume from pm-suspend

    Hi,
    i recently upgraded to 2.6.37 (on a hp nx6325 laptop) and noticed the following behaviour after a resume from pm-suspend:
    The fan control stops working until cpu reaches a temperature of 60°. As soon as the temperatur passes this threshold the fan starts rotating at max. speed. Below 60°, the fan is turned off immediately.
    pm-suspend.log:
    disabled, not active
    /usr/lib/pm-utils/sleep.d/01laptop-mode resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/01grub resume suspend:
    /usr/lib/pm-utils/sleep.d/01grub resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/00powersave resume suspend:
    /usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/00logging resume suspend:
    /usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
    Don Feb 3 09:16:21 CET 2011: Finished.
    Any ideas where to look for the problem?

    I have the same problem with   2.6.37.1-1: suspend do not work.
    The sceen goes blank then returns to X. The log shows the followings:
    Feb 21 15:50:33 localhost kernel: Suspending console(s) (use no_console_suspend to debug)
    Feb 21 15:50:33 localhost kernel: sd 2:0:0:0: [sda] Synchronizing SCSI cache
    Feb 21 15:50:33 localhost kernel: sd 2:0:0:0: [sda] Stopping disk
    Feb 21 15:50:33 localhost kernel: tpm_tis 00:03: Operation Timed out
    Feb 21 15:50:33 localhost kernel: legacy_suspend(): pnp_bus_suspend+0x0/0xa0 returns -62
    Feb 21 15:50:33 localhost kernel: PM: Device 00:03 failed to suspend: error -62
    Feb 21 15:50:33 localhost kernel: PM: Some devices failed to suspend
    Feb 21 15:50:33 localhost kernel: sd 2:0:0:0: [sda] Starting disk
    Feb 21 15:50:33 localhost kernel: b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23)
    Feb 21 15:50:33 localhost kernel: ------------[ cut here ]------------
    Feb 21 15:50:33 localhost kernel: WARNING: at drivers/base/power/main.c:106 device_pm_add+0xb6/0xc0()
    Feb 21 15:50:33 localhost kernel: Hardware name: HP Compaq 6715b (GB835EA#AKC)
    Feb 21 15:50:33 localhost kernel: Device: misc
    Feb 21 15:50:33 localhost kernel: Parentless device registered during a PM transaction
    Feb 21 15:50:33 localhost kernel: Modules linked in: fuse ipv6 vboxnetflt vboxdrv snd_seq_dummy snd_seq_oss snd_seq_midi_event loop snd_seq arc4 ecb radeon b43 ttm drm_kms_helper mac80211 snd_pcm_oss drm snd_mixer_oss joydev snd_hda_codec_analog ssb tpm_infineon i2c_algo_bit cfg80211 hp_wmi mmc_core sparse_keymap tg3 ppdev rfkill snd_hda_intel parport_pc libphy pcmcia snd_hda_codec snd_usb_audio snd_pcm ohci_hcd yenta_socket pcmcia_rsrc pcmcia_core firewire_ohci snd_hwdep tpm_tis snd_usbmidi_lib hp_accel lis3lv02d i2c_piix4 video tpm snd_timer firewire_core evdev ehci_hcd snd_rawmidi crc_itu_t serio_raw snd_page_alloc tpm_bios output wmi input_polldev thermal battery lp sg ac container usbcore i2c_core button fan snd_seq_device shpchp parport edac_core edac_mce_amd snd pci_hotplug psmouse soundcore k8temp cpufreq_ondemand powernow_k8 freq_table processor mperf ext4 mbcache jbd2 crc16 sd_mod sr_mod cdrom ahci libahci pata_atiixp pata_acpi libata scsi_mod
    Feb 21 15:50:33 localhost kernel: Pid: 12986, comm: pm-suspend Not tainted 2.6.37-ARCH #1
    Feb 21 15:50:33 localhost kernel: Call Trace:
    Feb 21 15:50:33 localhost kernel: [<ffffffff81056a1a>] warn_slowpath_common+0x7a/0xb0
    Feb 21 15:50:33 localhost kernel: [<ffffffff81056af1>] warn_slowpath_fmt+0x41/0x50
    Feb 21 15:50:33 localhost kernel: [<ffffffff812b8596>] device_pm_add+0xb6/0xc0
    Feb 21 15:50:33 localhost kernel: [<ffffffff812aea8e>] device_add+0x4ae/0x5c0
    Feb 21 15:50:33 localhost kernel: [<ffffffff812aebb9>] device_register+0x19/0x20
    Feb 21 15:50:33 localhost kernel: [<ffffffff812aed53>] device_create_vargs+0x193/0x1b0
    Feb 21 15:50:33 localhost kernel: [<ffffffff812aed9c>] device_create+0x2c/0x30
    Feb 21 15:50:33 localhost kernel: [<ffffffff813a5fc1>] ? mutex_lock+0x11/0x30
    Feb 21 15:50:33 localhost kernel: [<ffffffff8129a3fa>] misc_register+0x8a/0x140
    Feb 21 15:50:33 localhost kernel: [<ffffffff8129d36f>] hwrng_register+0xdf/0x170
    Feb 21 15:50:33 localhost kernel: [<ffffffffa0426ab0>] b43_wireless_core_init+0xdb0/0x11a0 [b43]
    Feb 21 15:50:33 localhost kernel: [<ffffffffa02d89e0>] ? wiphy_resume+0x0/0x90 [cfg80211]
    Feb 21 15:50:33 localhost kernel: [<ffffffffa0427068>] b43_op_start+0x1c8/0x1e0 [b43]
    Feb 21 15:50:33 localhost kernel: [<ffffffffa02d89e0>] ? wiphy_resume+0x0/0x90 [cfg80211]
    Feb 21 15:50:33 localhost kernel: [<ffffffffa0477a15>] ieee80211_reconfig+0x335/0x400 [mac80211]
    Feb 21 15:50:33 localhost kernel: [<ffffffffa02d89e0>] ? wiphy_resume+0x0/0x90 [cfg80211]
    Feb 21 15:50:33 localhost kernel: [<ffffffffa046d8b8>] ieee80211_resume+0x28/0x70 [mac80211]
    Feb 21 15:50:33 localhost kernel: [<ffffffffa02d8a55>] wiphy_resume+0x75/0x90 [cfg80211]
    Feb 21 15:50:33 localhost kernel: [<ffffffff812b7ebe>] legacy_resume+0x3e/0x80
    Feb 21 15:50:33 localhost kernel: [<ffffffff812b8025>] device_resume+0x125/0x130
    Feb 21 15:50:33 localhost kernel: [<ffffffff812b8192>] dpm_resume_end+0x102/0x3a0
    Feb 21 15:50:33 localhost kernel: [<ffffffff81096350>] suspend_devices_and_enter+0x90/0x1f0
    Feb 21 15:50:33 localhost kernel: [<ffffffff810965d0>] enter_state+0x120/0x150
    Feb 21 15:50:33 localhost kernel: [<ffffffff81095b16>] state_store+0xc6/0x100
    Feb 21 15:50:33 localhost kernel: [<ffffffff811f3c27>] kobj_attr_store+0x17/0x20
    Feb 21 15:50:33 localhost kernel: [<ffffffff8119f37f>] sysfs_write_file+0xcf/0x150
    Feb 21 15:50:33 localhost kernel: [<ffffffff81135ac6>] vfs_write+0xc6/0x190
    Feb 21 15:50:33 localhost kernel: [<ffffffff81135ddc>] sys_write+0x4c/0x80
    Feb 21 15:50:33 localhost kernel: [<ffffffff8100bed2>] system_call_fastpath+0x16/0x1b
    Feb 21 15:50:33 localhost kernel: ---[ end trace 19e4cbd37086936d ]---
    Feb 21 15:50:33 localhost kernel: PM: resume of devices complete after 1300.325 msecs
    Feb 21 15:50:33 localhost kernel: PM: Finishing wakeup.
    Feb 21 15:50:33 localhost kernel: Restarting tasks ... done.
    Feb 21 15:50:33 localhost kernel: video LNXVIDEO:00: Restoring backlight state
    And the solution on linux.kernel: http://groups.google.com/group/linux.ke … 616cfdb4a9
    Revert or wait!
    Or rmmod tpm_tis.
    Last edited by daroczig (2011-02-21 21:55:10)

  • Build 9926 - blue screen after resume from long sleep

    I installed Windows Technical Preview build 9841 in October, 4 days after it came out, via an upgrade, keeping everything, from the factory 8.1 (Toshiba with all the bloatware). The drive was almost empty at this point and I had installed only a couple
    of programs when I made the upgrade. I successfully upgraded to 9860 then 9879 the day those came out, and hadn't had any issues. Two days after installing 9879, I installed Linux Mint 17 KDE on a seperate 66GiB partition. Now I run a dual boot between Windows
    10 Pro Technical Preview (build 9926) and Kubuntu 15.04 Vivid Vervet preview. I hadn't had any problems with my laptop except for the very rare blue screen, until I tried installing Google Chrome Canary (under build 9879). It blue screened (BAD_POOL_CALLER
    I think) and it now does it after I resume from sleep (an overnight sleep where it hibernates or something) and I lift up the login screen. I think I'm the only one with this problem, so what can I do about it? Thanks

    PH
    These crashes were related to memory corruption (probably caused by a driver). 
    Please run these two tests to verify your memory and find which driver is causing the problem.  Please run verifier  first
    If you are over-clocking anything reset to default before running these tests.
    In other words STOP!!!  
    If you do not know what this means you probably are not
    1-Driver verifier (for complete directions see our wiki here)
    2-Memtest. (You can read more about running memtest here)
    Wanikiya and Dyami--Team Zigzag

  • Time Machine will not back up after updating from 10.2 to 10.3

    This just started yesterday so it has to be due to the update.
    The following error message is given in the Time Machine settings:
    The backup disk needs 257.55 GB for the backup but only 234.84 GB are available. Select a larger backup disk or make the backup smaller by excluding files.
    250 free gigs on my backup disk but it can't make the backup? What? I currently have 900GB filled on my regular hard drive but I don't back up all of it. I exclude about 150GB from backup, so the machine estimates the total backup size to be 759GB. The backup drive already has 764GB filled, so I'm not sure where all this extra info is coming from. Haven't downloaded anything besides the new update.
    Any ideas on what to do?

    This procedure is a diagnostic test. It makes no changes to your data.
    Please triple-click anywhere in the line below on this page to select it:
    tmutil compare | open -ef
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    The command may take several minutes to run. Wait for a new line ending in a dollar sign ($) to appear below what you entered.
    A TextEdit window will open with the output of the command. Don't post all the output; just read it yourself. Each line that begins with a plus sign (“+”) represents a file that has been added to the source volume since the last snapshot was taken. These files have not been backed up yet.
    Each line that begins with an exclamation point (“!”) represents a file that has changed on the source volume. These files have been backed up, but not in their present state.
    Each line that begins with a minus sign (“-“) represents a file that has been removed from the source volume.
    Files that you’ve excluded from backup, or that are excluded automatically, are ignored.
    At the end of the output, you’ll get some lines like the following:
    Added:
    Removed:
    Changed:
    These lines show the total amount of data added, removed, or changed on the source(s) since the last snapshot.
    Caution: Under some conditions, tmutil may falsely flag files as not having been backed up when in fact they have been. It can be confused by multi-linked files, or by files with a modification date earlier than the one in the snapshot. This will not be an issue for most users. If the results of the above procedure surprise you, inspect your snapshots directly.

  • 10.9.2 upgrade and now wifi will not automatically reconnect after wake from sleep

    I upgraded to 10.9.2 on my mid-2012 Macbook air and now when i wake the laptop from sleep the wifi will not automatically reconnect. I have to physically click on my network to re-join it.

    Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
    1. Make sure the network is on the preferred list by following these instructions. It's important to read the article carefully, as it's the starting point for any further efforts to solve the problem. If you skip any of the steps, the problem may not be solved. Make sure the box marked
    Remember networks this computer has joined
    is checked.
    2. Follow the instructions in this support article under the heading
    Symptom: After restarting or waking from sleep, my computer might not connect to the Internet
    3. Reset the PRAM.
    4. Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
    5. From the Location menu at the top of the Network preference pane, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.
    6. Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
    7. Repair permissions on the startup volume.
    8. Turn off Bluetooth and test.
    9. Reset the System Management Controller.
    10. Reinstall OS X.

  • Program will not even open after installation from Cloud

    I installed the new version of Acrobat only to have the old removed and the new will not open.

    Hi damionv91380806,
    Which OS are you on (Win/Mac)?
    Does Acrobat give you any error message when you try to launch it?
    Can you try launching Acrobat after running a repair and then restarting your machine?
    Thanks.

  • My ipad will not stay activated after upgrading from version 7 to version 8.

    After upgrading from version 7 to version8 I cannot keep my ipad activated.  I have tried online tech support and visited an Apple store with no one able to tell me what is happening.  Some said it might be had ware problems.  Other say it might be software problems.  With vs 7 I never had the problem.. I have anolder ipad with vs 5 and do not have the problems.  any feed back from anyone.

    '''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
    ''(If you're not using it, switch to the Default theme.)''
    * You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Don't select anything right now, just use "'Start in Safe Mode"''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
    '''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
    Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

  • Running xscreensaver in the background after resume from hibernate

    I'm using hibernate-script with my tuxonice kernel. One of the things that annoys me about xscreensaver is how when I resume its always running (because the requisite time has passed), so I have to type my password again, having just typed it at BIOS level.
    So I killall xscreensaver in an OnSuspend in /etc/hibernate/common.conf. However, restarting xscreensaver doesn't go to the background. What I'm using is this:-
    OnResume 20 sudo -b -u MYUSERNAME /usr/bin/xscreensaver
    However the terminal that I typed sudo hibernate from never returns, I have to killall xscreensaver from another terminal to get it to release. The problem does not occur when I login to a vt as root and run the same command.
    Any suggestions?

    I just registered for the forum so I could toss in my solution, so I hope this is what you're looking for. I fork the process and use the 'disown' command. I also use Dan Bernstein's 'setuidgid' utility because I couldn't get it to work with su (I didn't try very hard):
    OnResume 70 setuidgid USERNAME xscreensaver > /dev/null 2>&1 & disown
    This works for me even if I execute hibernate and resume from a terminal, despite the fact that II get a "can't find display" error from the terminal.
    Of course, the stdout and stderr redirect to /dev/null is not necessary. The 'disown' command removes the subprocess from the process table, so that the subprocess is no longer a child of the parent. It is cast off, essentially. I also use a similar command for restarting gkrellm because gkrellm sometimes fails to recognize my second battery after resume.
    One quirk I have found is that hibernate will halt if a kill or killall fails. I thought this was happening because the kill command had returned a non-zero exit status. But I just discovered that forking a kill command prevents hibernate from halting when a kill fails, as in:
    OnSuspend 20 killall xscreensaver > /dev/null 2>&1 &

  • Laptop screen does not turn on after resume from suspend/hibernate

    I use systemctl suspend/hibernate to resume,  but the screen does not turn on from resume. everything else still functions just fine, meaning i can type in reboot and reboot, but a "turned off" black screen.
    00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h Processor Root Complex
    00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] BeaverCreek [Radeon HD 6520G]
    00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] BeaverCreek HDMI Audio [Radeon HD 6500D and 6400G-6600G series]
    00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 12h Processor Root Port
    00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode]
    00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
    00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
    00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
    00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
    00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 13)
    00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD] FCH IDE Controller
    00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01)
    00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11)
    00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] FCH PCI Bridge (rev 40)
    00:15.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 0)
    00:15.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 1)
    00:15.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 2)
    00:16.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
    00:16.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
    00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 0 (rev 43)
    00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 1
    00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 2
    00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 3
    00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 4
    00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 6
    00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 5
    00:18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 7
    04:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01)
    05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.19.0-1-ARCH (builduser@tobias) (gcc version 4.9.2 20150204 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Feb 9 07:08:20 CET 2015
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=70f3d39a-cd3c-4127-84d2-9af3430201ab rw quiet rootfstype=xfs i8042.nomux=1 i8042.reset
    [ 0.000000] tseg: 009ff00000
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009f8f4fff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009f8f5000-0x000000009f939fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009f93a000-0x000000009f951fff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000009f952000-0x000000009f954fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009f955000-0x000000009f955fff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009f956000-0x000000009f96cfff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009f96d000-0x000000009f974fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009f975000-0x000000009f9a4fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009f9a5000-0x000000009f9a5fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009f9a6000-0x000000009f9b5fff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009f9b6000-0x000000009f9c3fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009f9c4000-0x000000009f9c5fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009f9c6000-0x000000009f9ccfff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009f9cd000-0x000000009fa02fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009fa03000-0x000000009fc05fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009fc06000-0x000000009fd78fff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009fd79000-0x000000009fef5fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009fef6000-0x000000009fefffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000023effffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: TOSHIBA Satellite L775D/TKBSS, BIOS 1.40 07/22/2011
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x23f000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF write-through
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-E7FFF uncachable
    [ 0.000000] E8000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0000000000 mask FF00000000 write-back
    [ 0.000000] 1 base 009FF00000 mask FFFFF00000 uncachable
    [ 0.000000] 2 base 00A0000000 mask FFE0000000 uncachable
    [ 0.000000] 3 base 00C0000000 mask FFC0000000 uncachable
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] TOM2: 000000023f000000 aka 9200M
    [ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
    [ 0.000000] e820: update [mem 0x9ff00000-0xffffffff] usable ==> reserved
    [ 0.000000] e820: last_pfn = 0x9ff00 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000fcf30-0x000fcf3f] mapped at [ffff8800000fcf30]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
    [ 0.000000] Using GB pages for direct mapping
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
    [ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
    [ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x23ee00000-0x23effffff]
    [ 0.000000] [mem 0x23ee00000-0x23effffff] page 2M
    [ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x220000000-0x23edfffff]
    [ 0.000000] [mem 0x220000000-0x23edfffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x200000000-0x21fffffff]
    [ 0.000000] [mem 0x200000000-0x21fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x9f8f4fff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
    [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
    [ 0.000000] [mem 0x80000000-0x9f7fffff] page 2M
    [ 0.000000] [mem 0x9f800000-0x9f8f4fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x9f955000-0x9f955fff]
    [ 0.000000] [mem 0x9f955000-0x9f955fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x9f9a6000-0x9f9b5fff]
    [ 0.000000] [mem 0x9f9a6000-0x9f9b5fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x9fc06000-0x9fd78fff]
    [ 0.000000] [mem 0x9fc06000-0x9fd78fff] page 4k
    [ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x9fef6000-0x9fefffff]
    [ 0.000000] [mem 0x9fef6000-0x9fefffff] page 4k
    [ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x100001000-0x1ffffffff]
    [ 0.000000] [mem 0x100001000-0x1001fffff] page 4k
    [ 0.000000] [mem 0x100200000-0x13fffffff] page 2M
    [ 0.000000] [mem 0x140000000-0x1ffffffff] page 1G
    [ 0.000000] RAMDISK: [mem 0x37652000-0x37b20fff]
    [ 0.000000] ACPI: Early table checksum verification disabled
    [ 0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 TOSASU)
    [ 0.000000] ACPI: XSDT 0x000000009F93A070 000064 (v01 TOSASU TOSASU00 01072009 AMI 00010013)
    [ 0.000000] ACPI: FACP 0x000000009F94E438 0000F4 (v04 TOSASU TOSASU00 01072009 AMI 00010013)
    [ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20141107/tbfadt-649)
    [ 0.000000] ACPI: DSDT 0x000000009F93A168 0142CF (v02 TOSASU TOSASU00 00000140 INTL 20051117)
    [ 0.000000] ACPI: FACS 0x000000009F9C6F80 000040
    [ 0.000000] ACPI: APIC 0x000000009F94E530 000072 (v03 TOSASU TOSASU00 01072009 AMI 00010013)
    [ 0.000000] ACPI: ECDT 0x000000009F94E5A8 0000C1 (v01 TOSASU TOSASU00 01072009 AMI. 00000004)
    [ 0.000000] ACPI: SLIC 0x000000009F94E670 000176 (v01 TOSASU TOSASU00 01072009 MSFT 00000001)
    [ 0.000000] ACPI: MCFG 0x000000009F94E7E8 00003C (v01 A M I GMCH945. 01072009 MSFT 00000097)
    [ 0.000000] ACPI: HPET 0x000000009F94E828 000038 (v01 TOSASU TOSASU00 01072009 AMI 00000004)
    [ 0.000000] ACPI: SSDT 0x000000009F94E860 000E34 (v01 AMD POWERNOW 00000001 AMD 00000001)
    [ 0.000000] ACPI: SSDT 0x000000009F94F698 00193D (v02 AMD ALIB 00000001 MSFT 04000000)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023effffff]
    [ 0.000000] NODE_DATA(0) allocated [mem 0x23eff8000-0x23effbfff]
    [ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880236e00000-ffff88023e5fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x23effffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
    [ 0.000000] node 0: [mem 0x00100000-0x9f8f4fff]
    [ 0.000000] node 0: [mem 0x9f955000-0x9f955fff]
    [ 0.000000] node 0: [mem 0x9f9a6000-0x9f9b5fff]
    [ 0.000000] node 0: [mem 0x9fc06000-0x9fd78fff]
    [ 0.000000] node 0: [mem 0x9fef6000-0x9fefffff]
    [ 0.000000] node 0: [mem 0x100001000-0x23effffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x23effffff]
    [ 0.000000] On node 0 totalpages: 1960479
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3997 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 10155 pages used for memmap
    [ 0.000000] DMA32 zone: 649859 pages, LIFO batch:31
    [ 0.000000] Normal zone: 20416 pages used for memmap
    [ 0.000000] Normal zone: 1306623 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
    [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
    [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f8f5000-0x9f939fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f93a000-0x9f951fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f952000-0x9f954fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f956000-0x9f96cfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f96d000-0x9f974fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f975000-0x9f9a4fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f9a5000-0x9f9a5fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f9b6000-0x9f9c3fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f9c4000-0x9f9c5fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f9c6000-0x9f9ccfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f9cd000-0x9fa02fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9fa03000-0x9fc05fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9fd79000-0x9fef5fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9ff00000-0xdfffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
    [ 0.000000] e820: [mem 0x9ff00000-0xdfffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88023ec00000 s86336 r8192 d32448 u524288
    [ 0.000000] pcpu-alloc: s86336 r8192 d32448 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1929823
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=70f3d39a-cd3c-4127-84d2-9af3430201ab rw quiet rootfstype=xfs i8042.nomux=1 i8042.reset
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] AGP: Checking aperture...
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 7635708K/7841916K available (5531K kernel code, 917K rwdata, 1744K rodata, 1164K init, 1156K bss, 206208K reserved, 0K cma-reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
    [ 0.000000] NR_IRQS:8448 nr_irqs:456 16
    [ 0.000000] spurious 8259A interrupt: IRQ7.
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 1397.380 MHz processor
    [ 0.000043] Calibrating delay loop (skipped), value calculated using timer frequency.. 2795.20 BogoMIPS (lpj=4657933)
    [ 0.000046] pid_max: default: 32768 minimum: 301
    [ 0.000053] ACPI: Core revision 20141107
    [ 0.000055] TOSHIBA Satellite detected - force copy of DSDT to local memory
    [ 0.000123] ACPI: Forced DSDT copy: length 0x142CF copied locally, original unmapped
    [ 0.015021] ACPI: All ACPI Tables successfully acquired
    [ 0.016280] Security Framework initialized
    [ 0.016286] Yama: becoming mindful.
    [ 0.016907] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.019182] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.020189] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.020201] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.020472] Initializing cgroup subsys memory
    [ 0.020479] Initializing cgroup subsys devices
    [ 0.020482] Initializing cgroup subsys freezer
    [ 0.020484] Initializing cgroup subsys net_cls
    [ 0.020487] Initializing cgroup subsys blkio
    [ 0.020510] CPU: Physical Processor ID: 0
    [ 0.020511] CPU: Processor Core ID: 0
    [ 0.020513] mce: CPU supports 6 MCE banks
    [ 0.020522] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
    Last level dTLB entries: 4KB 1024, 2MB 128, 4MB 64, 1GB 0
    [ 0.020644] Freeing SMP alternatives memory: 20K (ffffffff81a0a000 - ffffffff81a0f000)
    [ 0.021880] ftrace: allocating 21166 entries in 83 pages
    [ 0.035456] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.068473] smpboot: CPU0: AMD A6-3400M APU with Radeon(tm) HD Graphics (fam: 12, model: 01, stepping: 00)
    [ 0.174081] Performance Events: AMD PMU driver.
    [ 0.174086] ... version: 0
    [ 0.174087] ... bit width: 48
    [ 0.174088] ... generic registers: 4
    [ 0.174089] ... value mask: 0000ffffffffffff
    [ 0.174090] ... max period: 00007fffffffffff
    [ 0.174091] ... fixed-purpose events: 0
    [ 0.174092] ... event mask: 000000000000000f
    [ 0.191034] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.197738] x86: Booting SMP configuration:
    [ 0.197744] .... node #0, CPUs: #1 #2 #3
    [ 0.250891] x86: Booted up 1 node, 4 CPUs
    [ 0.250896] smpboot: Total of 4 processors activated (11183.83 BogoMIPS)
    [ 0.252264] devtmpfs: initialized
    [ 0.257696] PM: Registering ACPI NVS region [mem 0x9f8f5000-0x9f939fff] (282624 bytes)
    [ 0.257715] PM: Registering ACPI NVS region [mem 0x9f952000-0x9f954fff] (12288 bytes)
    [ 0.257718] PM: Registering ACPI NVS region [mem 0x9f96d000-0x9f974fff] (32768 bytes)
    [ 0.257721] PM: Registering ACPI NVS region [mem 0x9f9a5000-0x9f9a5fff] (4096 bytes)
    [ 0.257724] PM: Registering ACPI NVS region [mem 0x9f9b6000-0x9f9c3fff] (57344 bytes)
    [ 0.257727] PM: Registering ACPI NVS region [mem 0x9f9c6000-0x9f9ccfff] (28672 bytes)
    [ 0.257729] PM: Registering ACPI NVS region [mem 0x9fa03000-0x9fc05fff] (2109440 bytes)
    [ 0.258125] pinctrl core: initialized pinctrl subsystem
    [ 0.258173] RTC time: 18:50:52, date: 02/22/15
    [ 0.258343] NET: Registered protocol family 16
    [ 0.270952] cpuidle: using governor ladder
    [ 0.284279] cpuidle: using governor menu
    [ 0.284490] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.284493] ACPI: bus type PCI registered
    [ 0.284495] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.284605] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.284608] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.285035] PCI: Using configuration type 1 for base access
    [ 0.299021] ACPI: Added _OSI(Module Device)
    [ 0.299025] ACPI: Added _OSI(Processor Device)
    [ 0.299027] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.299029] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.300870] ACPI : EC: EC description table is found, configuring boot EC
    [ 0.302900] ACPI: Executed 2 blocks of module-level executable AML code
    [ 0.831121] ACPI: Interpreter enabled
    [ 0.831132] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
    [ 0.831140] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
    [ 0.831167] ACPI: (supports S0 S3 S4 S5)
    [ 0.831169] ACPI: Using IOAPIC for interrupt routing
    [ 0.831382] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.842727] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.842738] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 0.843157] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
    [ 0.843782] PCI host bridge to bus 0000:00
    [ 0.843788] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.843792] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
    [ 0.843796] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
    [ 0.843800] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
    [ 0.843803] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.843806] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.843810] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
    [ 0.843813] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
    [ 0.843825] pci 0000:00:00.0: [1022:1705] type 00 class 0x060000
    [ 0.843978] pci 0000:00:01.0: [1002:9647] type 00 class 0x030000
    [ 0.843993] pci 0000:00:01.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref]
    [ 0.844002] pci 0000:00:01.0: reg 0x14: [io 0xf000-0xf0ff]
    [ 0.844011] pci 0000:00:01.0: reg 0x18: [mem 0xfeb00000-0xfeb3ffff]
    [ 0.844070] pci 0000:00:01.0: supports D1 D2
    [ 0.844185] pci 0000:00:01.1: [1002:1714] type 00 class 0x040300
    [ 0.844197] pci 0000:00:01.1: reg 0x10: [mem 0xfeb44000-0xfeb47fff]
    [ 0.844272] pci 0000:00:01.1: supports D1 D2
    [ 0.844388] pci 0000:00:02.0: [1022:1707] type 01 class 0x060400
    [ 0.844483] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
    [ 0.844641] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
    [ 0.844665] pci 0000:00:11.0: reg 0x10: [io 0xf190-0xf197]
    [ 0.844678] pci 0000:00:11.0: reg 0x14: [io 0xf180-0xf183]
    [ 0.844690] pci 0000:00:11.0: reg 0x18: [io 0xf170-0xf177]
    [ 0.844703] pci 0000:00:11.0: reg 0x1c: [io 0xf160-0xf163]
    [ 0.844715] pci 0000:00:11.0: reg 0x20: [io 0xf150-0xf15f]
    [ 0.844728] pci 0000:00:11.0: reg 0x24: [mem 0xfeb4e000-0xfeb4e7ff]
    [ 0.844896] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
    [ 0.844914] pci 0000:00:12.0: reg 0x10: [mem 0xfeb4d000-0xfeb4dfff]
    [ 0.845044] pci 0000:00:12.0: System wakeup disabled by ACPI
    [ 0.845114] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
    [ 0.845138] pci 0000:00:12.2: reg 0x10: [mem 0xfeb4c000-0xfeb4c0ff]
    [ 0.845242] pci 0000:00:12.2: supports D1 D2
    [ 0.845245] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
    [ 0.845313] pci 0000:00:12.2: System wakeup disabled by ACPI
    [ 0.845383] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
    [ 0.845400] pci 0000:00:13.0: reg 0x10: [mem 0xfeb4b000-0xfeb4bfff]
    [ 0.845529] pci 0000:00:13.0: System wakeup disabled by ACPI
    [ 0.845599] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
    [ 0.845623] pci 0000:00:13.2: reg 0x10: [mem 0xfeb4a000-0xfeb4a0ff]
    [ 0.845727] pci 0000:00:13.2: supports D1 D2
    [ 0.845730] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
    [ 0.845799] pci 0000:00:13.2: System wakeup disabled by ACPI
    [ 0.845867] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
    [ 0.846051] pci 0000:00:14.1: [1022:780c] type 00 class 0x01018a
    [ 0.846069] pci 0000:00:14.1: reg 0x10: [io 0xf140-0xf147]
    [ 0.846081] pci 0000:00:14.1: reg 0x14: [io 0xf130-0xf133]
    [ 0.846094] pci 0000:00:14.1: reg 0x18: [io 0xf120-0xf127]
    [ 0.846107] pci 0000:00:14.1: reg 0x1c: [io 0xf110-0xf113]
    [ 0.846119] pci 0000:00:14.1: reg 0x20: [io 0xf100-0xf10f]
    [ 0.846145] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
    [ 0.846148] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
    [ 0.846151] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
    [ 0.846154] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
    [ 0.846275] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
    [ 0.846303] pci 0000:00:14.2: reg 0x10: [mem 0xfeb40000-0xfeb43fff 64bit]
    [ 0.846387] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    [ 0.846454] pci 0000:00:14.2: System wakeup disabled by ACPI
    [ 0.846515] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
    [ 0.846704] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
    [ 0.846806] pci 0000:00:14.4: System wakeup disabled by ACPI
    [ 0.846879] pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400
    [ 0.846982] pci 0000:00:15.0: supports D1 D2
    [ 0.847053] pci 0000:00:15.0: System wakeup disabled by ACPI
    [ 0.847122] pci 0000:00:15.1: [1022:43a1] type 01 class 0x060400
    [ 0.847225] pci 0000:00:15.1: supports D1 D2
    [ 0.847296] pci 0000:00:15.1: System wakeup disabled by ACPI
    [ 0.847363] pci 0000:00:15.2: [1022:43a2] type 01 class 0x060400
    [ 0.847466] pci 0000:00:15.2: supports D1 D2
    [ 0.847537] pci 0000:00:15.2: System wakeup disabled by ACPI
    [ 0.847610] pci 0000:00:16.0: [1022:7807] type 00 class 0x0c0310
    [ 0.847628] pci 0000:00:16.0: reg 0x10: [mem 0xfeb49000-0xfeb49fff]
    [ 0.847757] pci 0000:00:16.0: System wakeup disabled by ACPI
    [ 0.847827] pci 0000:00:16.2: [1022:7808] type 00 class 0x0c0320
    [ 0.847851] pci 0000:00:16.2: reg 0x10: [mem 0xfeb48000-0xfeb480ff]
    [ 0.847956] pci 0000:00:16.2: supports D1 D2
    [ 0.847959] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
    [ 0.848026] pci 0000:00:16.2: System wakeup disabled by ACPI
    [ 0.848093] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
    [ 0.848228] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
    [ 0.848359] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
    [ 0.848490] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
    [ 0.848632] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
    [ 0.848762] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
    [ 0.848892] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
    [ 0.849021] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
    [ 0.849252] pci 0000:00:02.0: PCI bridge to [bus 01]
    [ 0.849360] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
    [ 0.849372] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
    [ 0.849376] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
    [ 0.849379] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
    [ 0.849383] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.849387] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.849390] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
    [ 0.849394] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
    [ 0.849483] pci 0000:00:15.0: PCI bridge to [bus 03]
    [ 0.849617] pci 0000:04:00.0: [10ec:8176] type 00 class 0x028000
    [ 0.849646] pci 0000:04:00.0: reg 0x10: [io 0xe000-0xe0ff]
    [ 0.849687] pci 0000:04:00.0: reg 0x18: [mem 0xfea00000-0xfea03fff 64bit]
    [ 0.849834] pci 0000:04:00.0: supports D1 D2
    [ 0.849837] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.849878] pci 0000:04:00.0: System wakeup disabled by ACPI
    [ 0.854467] pci 0000:00:15.1: PCI bridge to [bus 04]
    [ 0.854488] pci 0000:00:15.1: bridge window [io 0xe000-0xefff]
    [ 0.854499] pci 0000:00:15.1: bridge window [mem 0xfea00000-0xfeafffff]
    [ 0.854661] pci 0000:05:00.0: [10ec:8136] type 00 class 0x020000
    [ 0.854688] pci 0000:05:00.0: reg 0x10: [io 0xd000-0xd0ff]
    [ 0.854722] pci 0000:05:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]
    [ 0.854743] pci 0000:05:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
    [ 0.854860] pci 0000:05:00.0: supports D1 D2
    [ 0.854863] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.854907] pci 0000:05:00.0: System wakeup disabled by ACPI
    [ 0.861144] pci 0000:00:15.2: PCI bridge to [bus 05]
    [ 0.861165] pci 0000:00:15.2: bridge window [io 0xd000-0xdfff]
    [ 0.861180] pci 0000:00:15.2: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
    [ 0.861237] acpi PNP0A03:00: Disabling ASPM (FADT indicates it is unsupported)
    [ 0.861791] ACPI: PCI Interrupt Link [LN24] (IRQs *24)
    [ 0.861823] ACPI: PCI Interrupt Link [LN25] (IRQs *25)
    [ 0.861855] ACPI: PCI Interrupt Link [LN26] (IRQs *26)
    [ 0.861887] ACPI: PCI Interrupt Link [LN27] (IRQs *27)
    [ 0.861918] ACPI: PCI Interrupt Link [LN28] (IRQs *28)
    [ 0.861951] ACPI: PCI Interrupt Link [LN29] (IRQs *29)
    [ 0.861981] ACPI: PCI Interrupt Link [LN30] (IRQs *30)
    [ 0.862011] ACPI: PCI Interrupt Link [LN31] (IRQs *31)
    [ 0.862041] ACPI: PCI Interrupt Link [LN32] (IRQs *32)
    [ 0.862071] ACPI: PCI Interrupt Link [LN33] (IRQs *33)
    [ 0.862101] ACPI: PCI Interrupt Link [LN34] (IRQs *34)
    [ 0.862130] ACPI: PCI Interrupt Link [LN35] (IRQs *35)
    [ 0.862160] ACPI: PCI Interrupt Link [LN36] (IRQs *36)
    [ 0.862190] ACPI: PCI Interrupt Link [LN37] (IRQs *37)
    [ 0.862219] ACPI: PCI Interrupt Link [LN38] (IRQs *38)
    [ 0.862249] ACPI: PCI Interrupt Link [LN39] (IRQs *39)
    [ 0.862279] ACPI: PCI Interrupt Link [LN40] (IRQs *40)
    [ 0.862309] ACPI: PCI Interrupt Link [LN41] (IRQs *41)
    [ 0.862338] ACPI: PCI Interrupt Link [LN42] (IRQs *42)
    [ 0.862368] ACPI: PCI Interrupt Link [LN43] (IRQs *43)
    [ 0.862398] ACPI: PCI Interrupt Link [LN44] (IRQs *44)
    [ 0.862428] ACPI: PCI Interrupt Link [LN45] (IRQs *45)
    [ 0.862457] ACPI: PCI Interrupt Link [LN46] (IRQs *46)
    [ 0.862487] ACPI: PCI Interrupt Link [LN47] (IRQs *47)
    [ 0.862517] ACPI: PCI Interrupt Link [LN48] (IRQs *48)
    [ 0.862546] ACPI: PCI Interrupt Link [LN49] (IRQs *49)
    [ 0.862576] ACPI: PCI Interrupt Link [LN50] (IRQs *50)
    [ 0.862606] ACPI: PCI Interrupt Link [LN51] (IRQs *51)
    [ 0.862635] ACPI: PCI Interrupt Link [LN52] (IRQs *52)
    [ 0.862665] ACPI: PCI Interrupt Link [LN53] (IRQs *53)
    [ 0.862695] ACPI: PCI Interrupt Link [LN54] (IRQs *54)
    [ 0.862726] ACPI: PCI Interrupt Link [LN55] (IRQs *55)
    [ 0.862781] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
    [ 0.862883] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
    [ 0.862986] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
    [ 0.863084] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
    [ 0.863164] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
    [ 0.863228] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
    [ 0.863292] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
    [ 0.863356] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
    [ 0.864141] ACPI : EC: GPE = 0xc, I/O: command/status = 0x66, data = 0x62
    [ 0.864446] vgaarb: setting as boot device: PCI:0000:00:01.0
    [ 0.864452] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.864464] vgaarb: loaded
    [ 0.864466] vgaarb: bridge control possible 0000:00:01.0
    [ 0.864788] PCI: Using ACPI for IRQ routing
    [ 0.874741] PCI: pci_cache_line_size set to 64 bytes
    [ 0.874840] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
    [ 0.874844] e820: reserve RAM buffer [mem 0x9f8f5000-0x9fffffff]
    [ 0.874848] e820: reserve RAM buffer [mem 0x9f956000-0x9fffffff]
    [ 0.874851] e820: reserve RAM buffer [mem 0x9f9b6000-0x9fffffff]
    [ 0.874854] e820: reserve RAM buffer [mem 0x9fd79000-0x9fffffff]
    [ 0.874856] e820: reserve RAM buffer [mem 0x9ff00000-0x9fffffff]
    [ 0.874859] e820: reserve RAM buffer [mem 0x23f000000-0x23fffffff]
    [ 0.875079] NetLabel: Initializing
    [ 0.875081] NetLabel: domain hash size = 128
    [ 0.875083] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.875101] NetLabel: unlabeled traffic allowed by default
    [ 0.875143] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [ 0.875149] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
    [ 0.877246] Switched to clocksource hpet
    [ 0.884868] pnp: PnP ACPI init
    [ 0.885072] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.885079] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.886017] system 00:01: [io 0x04d0-0x04d1] has been reserved
    [ 0.886021] system 00:01: [io 0x040b] has been reserved
    [ 0.886025] system 00:01: [io 0x04d6] has been reserved
    [ 0.886029] system 00:01: [io 0x0c00-0x0c01] has been reserved
    [ 0.886032] system 00:01: [io 0x0c14] has been reserved
    [ 0.886036] system 00:01: [io 0x0c50-0x0c51] has been reserved
    [ 0.886039] system 00:01: [io 0x0c52] has been reserved
    [ 0.886042] system 00:01: [io 0x0c6c] has been reserved
    [ 0.886046] system 00:01: [io 0x0c6f] has been reserved
    [ 0.886049] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
    [ 0.886052] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
    [ 0.886056] system 00:01: [io 0x0cd4-0x0cd5] has been reserved
    [ 0.886059] system 00:01: [io 0x0cd6-0x0cd7] has been reserved
    [ 0.886063] system 00:01: [io 0x0cd8-0x0cdf] has been reserved
    [ 0.886067] system 00:01: [io 0x0800-0x089f] could not be reserved
    [ 0.886070] system 00:01: [io 0x0b20-0x0b3f] has been reserved
    [ 0.886074] system 00:01: [io 0x0900-0x090f] has been reserved
    [ 0.886082] system 00:01: [io 0x0910-0x091f] has been reserved
    [ 0.886086] system 00:01: [io 0xfe00-0xfefe] has been reserved
    [ 0.886091] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.886096] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
    [ 0.886100] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
    [ 0.886104] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
    [ 0.886107] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
    [ 0.886112] system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
    [ 0.886116] system 00:01: [mem 0xff000000-0xffffffff] has been reserved
    [ 0.886120] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.886180] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.886279] system 00:03: [io 0x04d0-0x04d1] has been reserved
    [ 0.886283] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.886353] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.886420] system 00:05: [io 0x0240-0x0259] has been reserved
    [ 0.886424] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.886523] pnp 00:06: Plug and Play ACPI device, IDs TOS0220 SYN1d00 SYN0002 PNP0f13 (active)
    [ 0.886596] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [ 0.886784] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.887277] pnp: PnP ACPI: found 9 devices
    [ 0.895955] pci 0000:00:02.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
    [ 0.895964] pci 0000:00:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
    [ 0.895969] pci 0000:00:02.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
    [ 0.896008] pci 0000:00:02.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
    [ 0.896012] pci 0000:00:02.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.896016] pci 0000:00:02.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.896026] pci 0000:00:02.0: BAR 14: assigned [mem 0xd0100000-0xd02fffff]
    [ 0.896039] pci 0000:00:02.0: BAR 15: assigned [mem 0xd0300000-0xd04fffff 64bit pref]
    [ 0.896046] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff]
    [ 0.896051] pci 0000:00:02.0: PCI bridge to [bus 01]
    [ 0.896056] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff]
    [ 0.896061] pci 0000:00:02.0: bridge window [mem 0xd0100000-0xd02fffff]
    [ 0.896067] pci 0000:00:02.0: bridge window [mem 0xd0300000-0xd04fffff 64bit pref]
    [ 0.896073] pci 0000:00:14.4: PCI bridge to [bus 02]
    [ 0.896089] pci 0000:00:15.0: PCI bridge to [bus 03]
    [ 0.896103] pci 0000:00:15.1: PCI bridge to [bus 04]
    [ 0.896107] pci 0000:00:15.1: bridge window [io 0xe000-0xefff]
    [ 0.896114] pci 0000:00:15.1: bridge window [mem 0xfea00000-0xfeafffff]
    [ 0.896124] pci 0000:00:15.2: PCI bridge to [bus 05]
    [ 0.896129] pci 0000:00:15.2: bridge window [io 0xd000-0xdfff]
    [ 0.896138] pci 0000:00:15.2: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
    [ 0.896147] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
    [ 0.896151] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
    [ 0.896154] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
    [ 0.896157] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
    [ 0.896160] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
    [ 0.896164] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
    [ 0.896167] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
    [ 0.896171] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
    [ 0.896174] pci_bus 0000:01: resource 1 [mem 0xd0100000-0xd02fffff]
    [ 0.896178] pci_bus 0000:01: resource 2 [mem 0xd0300000-0xd04fffff 64bit pref]
    [ 0.896182] pci_bus 0000:02: resource 4 [io 0x0000-0x03af]
    [ 0.896185] pci_bus 0000:02: resource 5 [io 0x03e0-0x0cf7]
    [ 0.896188] pci_bus 0000:02: resource 6 [io 0x03b0-0x03df]
    [ 0.896191] pci_bus 0000:02: resource 7 [io 0x0d00-0xffff]
    [ 0.896194] pci_bus 0000:02: resource 8 [mem 0x000a0000-0x000bffff]
    [ 0.896198] pci_bus 0000:02: resource 9 [mem 0x000c0000-0x000dffff]
    [ 0.896201] pci_bus 0000:02: resource 10 [mem 0xc0000000-0xffffffff]
    [ 0.896205] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
    [ 0.896208] pci_bus 0000:04: resource 1 [mem 0xfea00000-0xfeafffff]
    [ 0.896212] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
    [ 0.896215] pci_bus 0000:05: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
    [ 0.896259] NET: Registered protocol family 2
    [ 0.896597] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.896863] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.897301] TCP: Hash tables configured (established 65536 bind 65536)
    [ 0.897360] TCP: reno registered
    [ 0.897379] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.897467] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.897618] NET: Registered protocol family 1
    [ 0.897646] pci 0000:00:01.0: Video device with shadowed ROM
    [ 1.838171] PCI: CLS 64 bytes, default 64
    [ 1.838242] Unpacking initramfs...
    [ 1.934095] Freeing initrd memory: 4924K (ffff880037652000 - ffff880037b21000)
    [ 1.934107] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 1.934110] software IO TLB [mem 0x9b8f5000-0x9f8f5000] (64MB) mapped at [ffff88009b8f5000-ffff88009f8f4fff]
    [ 1.934495] microcode: CPU0: patch_level=0x03000014
    [ 1.934537] microcode: CPU1: patch_level=0x03000014
    [ 1.934580] microcode: CPU2: patch_level=0x03000014
    [ 1.934625] microcode: CPU3: patch_level=0x03000014
    [ 1.934758] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 1.934766] LVT offset 0 assigned for vector 0x400
    [ 1.934817] perf: AMD IBS detected (0x000000ff)
    [ 1.934854] Scanning for low memory corruption every 60 seconds
    [ 1.935293] futex hash table entries: 1024 (order: 4, 65536 bytes)
    [ 1.935315] Initialise system trusted keyring
    [ 1.935789] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 1.937285] zpool: loaded
    [ 1.937288] zbud: loaded
    [ 1.937658] VFS: Disk quotas dquot_6.5.2
    [ 1.937709] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 1.937948] Key type big_key registered
    [ 1.938436] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 1.938508] io scheduler noop registered
    [ 1.938511] io scheduler deadline registered
    [ 1.938546] io scheduler cfq registered (default)
    [ 1.939375] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
    [ 1.939380] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
    [ 1.939399] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
    [ 1.939403] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
    [ 1.939421] pcieport 0000:00:15.1: Signaling PME through PCIe PME interrupt
    [ 1.939423] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
    [ 1.939428] pcie_pme 0000:00:15.1:pcie01: service driver pcie_pme loaded
    [ 1.939447] pcieport 0000:00:15.2: Signaling PME through PCIe PME interrupt
    [ 1.939449] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
    [ 1.939453] pcie_pme 0000:00:15.2:pcie01: service driver pcie_pme loaded
    [ 1.939461] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 1.939494] pciehp 0000:00:02.0:pcie04: Slot #2 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
    [ 1.939528] pciehp 0000:00:02.0:pcie04: service driver pciehp loaded
    [ 1.939533] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 1.939550] vesafb: mode is 1152x864x32, linelength=4608, pages=0
    [ 1.939552] vesafb: scrolling: redraw
    [ 1.939554] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
    [ 1.939576] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010e80000, using 3904k, total 3904k
    [ 1.955978] Console: switching to colour frame buffer device 144x54
    [ 1.972261] fb0: VESA VGA frame buffer device
    [ 1.972328] GHES: HEST is not enabled!
    [ 1.972535] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 1.973720] Linux agpgart interface v0.103
    [ 1.973797] rtc_cmos 00:02: RTC can wake from S4
    [ 1.973936] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
    [ 1.973964] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [ 1.973983] ledtrig-cpu: registered to indicate activity on CPUs
    [ 1.974434] TCP: cubic registered
    [ 1.974593] NET: Registered protocol family 10
    [ 1.975020] NET: Registered protocol family 17
    [ 1.975476] Loading compiled-in X.509 certificates
    [ 1.975502] registered taskstats version 1
    [ 1.976231] Magic number: 3:326:848
    [ 1.976341] rtc_cmos 00:02: setting system clock to 2015-02-22 18:50:54 UTC (1424631054)
    [ 1.976444] PM: Hibernation image not present or could not be loaded.
    [ 1.977023] Freeing unused kernel memory: 1164K (ffffffff818e7000 - ffffffff81a0a000)
    [ 1.977027] Write protecting the kernel read-only data: 8192k
    [ 1.977495] Freeing unused kernel memory: 600K (ffff88000156a000 - ffff880001600000)
    [ 1.977718] Freeing unused kernel memory: 304K (ffff8800017b4000 - ffff880001800000)
    [ 1.979659] random: systemd urandom read with 1 bits of entropy available
    [ 1.980307] systemd[1]: systemd 219 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
    [ 1.980576] systemd[1]: Detected architecture 'x86-64'.
    [ 1.980581] systemd[1]: Running in initial RAM disk.
    [ 1.980590] systemd[1]: Running with unpopulated /etc.
    [ 1.980603] systemd[1]: No hostname configured.
    [ 1.980609] systemd[1]: Set hostname to <localhost>.
    [ 1.980655] systemd[1]: Initializing machine ID from random generator.
    [ 1.996373] systemd[1]: Populated /etc with preset unit settings.
    [ 1.999327] systemd[1]: Unit type .busname is not supported on this system.
    [ 2.003390] systemd[1]: Created slice -.slice.
    [ 2.003412] systemd[1]: Starting -.slice.
    [ 2.005054] systemd[1]: Listening on Journal Audit Socket.
    [ 2.005188] systemd[1]: Created slice system.slice.
    [ 2.005200] systemd[1]: Starting system.slice.
    [ 2.005218] systemd[1]: Reached target Swap.
    [ 2.005226] systemd[1]: Starting Swap.
    [ 2.005288] systemd[1]: Listening on udev Control Socket.
    [ 2.005296] systemd[1]: Starting udev Control Socket.
    [ 2.005312] systemd[1]: Reached target Slices.
    [ 2.005320] systemd[1]: Starting Slices.
    [ 2.005335] systemd[1]: Reached target Local File Systems.
    [ 2.005342] systemd[1]: Starting Local File Systems.
    [ 2.005358] systemd[1]: Reached target Timers.
    [ 2.005366] systemd[1]: Starting Timers.
    [ 2.005398] systemd[1]: Listening on udev Kernel Socket.
    [ 2.005409] systemd[1]: Starting udev Kernel Socket.
    [ 2.005430] systemd[1]: Reached target Paths.
    [ 2.005441] systemd[1]: Starting Paths.
    [ 2.005497] systemd[1]: Listening on Journal Socket.
    [ 2.005510] systemd[1]: Starting Journal Socket.
    [ 2.006097] systemd[1]: Starting udev Coldplug all Devices...
    [ 2.006689] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    [ 2.006801] systemd[1]: Created slice system-systemd\x2dfsck.slice.
    [ 2.006811] systemd[1]: Starting system-systemd\x2dfsck.slice.
    [ 2.006860] systemd[1]: Listening on Journal Socket (/dev/log).
    [ 2.006870] systemd[1]: Starting Journal Socket (/dev/log).
    [ 2.007428] systemd[1]: Starting Journal Service...
    [ 2.007472] systemd[1]: Reached target Sockets.
    [ 2.007494] systemd[1]: Starting Sockets.
    [ 2.011399] systemd[1]: Started Create list of required static device nodes for the current kernel.
    [ 2.012026] systemd[1]: Starting Create Static Device Nodes in /dev...
    [ 2.012842] systemd-journald[63]: Failed to set file attributes: Inappropriate ioctl for device
    [ 2.016230] systemd[1]: Started Create Static Device Nodes in /dev.
    [ 2.016999] systemd[1]: Starting udev Kernel Device Manager...
    [ 2.021212] systemd[1]: Started udev Kernel Device Manager.
    [ 2.024169] systemd[1]: Started udev Coldplug all Devices.
    [ 2.029792] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 2.032026] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 2.032044] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 2.041719] SCSI subsystem initialized
    [ 2.042505] ACPI: bus type USB registered
    [ 2.042538] usbcore: registered new interface driver usbfs
    [ 2.042552] usbcore: registered new interface driver hub
    [ 2.042588] usbcore: registered new device driver usb
    [ 2.044174] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 2.045154] systemd[1]: Started Journal Service.
    [ 2.045633] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 2.045840] ohci-pci: OHCI PCI platform driver
    [ 2.045993] QUIRK: Enable AMD PLL fix
    [ 2.046022] ohci-pci 0000:00:12.0: OHCI PCI host controller
    [ 2.046033] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1
    [ 2.046079] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb4d000
    [ 2.046697] ehci-pci: EHCI PCI platform driver
    [ 2.047833] libata version 3.00 loaded.
    [ 2.084196] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 2.102273] hub 1-0:1.0: USB hub found
    [ 2.102287] hub 1-0:1.0: 5 ports detected
    [ 2.102593] ohci-pci 0000:00:13.0: OHCI PCI host controller
    [ 2.102600] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2
    [ 2.102631] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb4b000
    [ 2.159071] hub 2-0:1.0: USB hub found
    [ 2.159085] hub 2-0:1.0: 5 ports detected
    [ 2.160195] ohci-pci 0000:00:16.0: OHCI PCI host controller
    [ 2.160202] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 3
    [ 2.160235] ohci-pci 0000:00:16.0: irq 18, io mem 0xfeb49000
    [ 2.215699] hub 3-0:1.0: USB hub found
    [ 2.215713] hub 3-0:1.0: 4 ports detected
    [ 2.271489] ehci-pci 0000:00:12.2: EHCI Host Controller
    [ 2.271502] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 4
    [ 2.271509] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 2.271523] ehci-pci 0000:00:12.2: debug port 1
    [ 2.271574] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb4c000
    [ 2.281276] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
    [ 2.281694] hub 4-0:1.0: USB hub found
    [ 2.281705] hub 4-0:1.0: 5 ports detected
    [ 2.338086] hub 1-0:1.0: USB hub found
    [ 2.338100] hub 1-0:1.0: 5 ports detected
    [ 2.338571] ehci-pci 0000:00:13.2: EHCI Host Controller
    [ 2.338579] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 5
    [ 2.338584] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 2.338596] ehci-pci 0000:00:13.2: debug port 1
    [ 2.338634] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb4a000
    [ 2.347963] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
    [ 2.348396] hub 5-0:1.0: USB hub found
    [ 2.348414] hub 5-0:1.0: 5 ports detected
    [ 2.404806] hub 2-0:1.0: USB hub found
    [ 2.404820] hub 2-0:1.0: 5 ports detected
    [ 2.461536] ehci-pci 0000:00:16.2: EHCI Host Controller
    [ 2.461550] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 6
    [ 2.461557] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 2.461571] ehci-pci 0000:00:16.2: debug port 1
    [ 2.461611] ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb48000
    [ 2.471331] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
    [ 2.471768] hub 6-0:1.0: USB hub found
    [ 2.471780] hub 6-0:1.0: 4 ports detected
    [ 2.528139] hub 3-0:1.0: USB hub found
    [ 2.528154] hub 3-0:1.0: 4 ports detected
    [ 2.528415] ahci 0000:00:11.0: version 3.0
    [ 2.528689] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
    [ 2.528693] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
    [ 2.529180] scsi host0: ahci
    [ 2.529664] scsi host1: ahci
    [ 2.529777] ata1: SATA max UDMA/133 abar m2048@0xfeb4e000 port 0xfeb4e100 irq 28
    [ 2.529781] ata2: SATA max UDMA/133 abar m2048@0xfeb4e000 port 0xfeb4e180 irq 28
    [ 2.530551] scsi host2: pata_atiixp
    [ 2.530815] scsi host3: pata_atiixp
    [ 2.530912] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf100 irq 14
    [ 2.530914] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf108 irq 15
    [ 2.654798] usb 5-4: new high-speed USB device number 2 using ehci-pci
    [ 2.934859] tsc: Refined TSC clocksource calibration: 1397.458 MHz
    [ 3.014908] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 3.014947] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 3.016183] ata1.00: ATA-8: Hitachi HTS547550A9E384, JE3OA60B, max UDMA/133
    [ 3.016190] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 3.016972] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633F, TF01, max UDMA/100
    [ 3.017307] ata1.00: configured for UDMA/133
    [ 3.017807] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54755 A60B PQ: 0 ANSI: 5
    [ 3.019278] ata2.00: configured for UDMA/100
    [ 3.025787] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633F TF01 PQ: 0 ANSI: 5
    [ 3.044649] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    [ 3.044654] sd 0:0:0:0: [sda] 4096-byte physical blocks
    [ 3.044859] sd 0:0:0:0: [sda] Write Protect is off
    [ 3.044865] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 3.044918] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 3.061859] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 3.061874] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 3.062232] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 3.084075] sda: sda1 sda2 sda3
    [ 3.085567] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 3.414041] SGI XFS with ACLs, security attributes, realtime, no debug enabled
    [ 3.528901] XFS (sda1): Mounting V4 Filesystem
    [ 3.710527] XFS (sda1): Ending clean mount
    [ 3.935255] Switched to clocksource tsc
    [ 3.999076] systemd-journald[63]: Received SIGTERM from PID 1 (systemd).
    [ 4.799287] random: nonblocking pool is initialized
    [ 6.377516] systemd-journald[187]: Failed to set file attributes: Inappropriate ioctl for device
    [ 7.417234] ACPI: acpi_idle registered with cpuidle
    [ 7.464892] acpi-cpufreq: overriding BIOS provided _PSD data
    [ 7.544509] wmi: Mapper loaded
    [ 7.612504] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
    [ 7.626522] acpi device:2b: registered as cooling_device4
    [ 7.626631] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input2
    [ 7.700708] ACPI Warning: SystemIO range 0x0000000000000b00-0x0000000000000b07 conflicts with OpRegion 0x0000000000000b00-0x0000000000000b0f (\SMBX) (20141107/utaddress-258)
    [ 7.700729] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 7.734642] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
    [ 7.737166] thermal LNXTHERM:00: registered as thermal_zone0
    [ 7.737173] ACPI: Thermal Zone [THRM] (50 C)
    [ 7.746486] ACPI: Lid Switch [LID]
    [ 7.746714] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
    [ 7.746725] ACPI: Power Button [SLPB]
    [ 7.746874] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
    [ 7.746880] ACPI: Power Button [PWRF]
    [ 7.749494] ACPI: Battery Slot [BAT0] (battery present)
    [ 7.749951] ACPI: AC Adapter [AC0] (on-line)
    [ 7.755509] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 7.961538] input: PC Speaker as /devices/platform/pcspkr/input/input6
    [ 8.061752] [drm] Initialized drm 1.1.0 20060810
    [ 8.296521] cfg80211: Calling CRDA to update world regulatory domain
    [ 8.319199] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 8.319231] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 8.320035] r8169 0000:05:00.0 eth0: RTL8105e at 0xffffc90000032000, 38:60:77:69:8f:16, XID 00a00000 IRQ 29
    [ 8.363138] kvm: Nested Virtualization enabled
    [ 8.363151] kvm: Nested Paging enabled
    [ 8.704039] [drm] radeon kernel modesetting enabled.
    [ 8.794078] r8169 0000:05:00.0 enp5s0: renamed from eth0
    [ 8.832358] AMD IOMMUv2 driver by Joerg Roedel <[email protected]>
    [ 8.832364] AMD IOMMUv2 functionality not available on this system
    [ 8.959092] rtl8192ce: Using firmware rtlwifi/rtl8192cfw.bin
    [ 8.961187] snd_hda_codec_hdmi: unknown parameter 'index' ignored
    [ 8.965010] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card1/input8
    [ 9.031523] media: Linux media interface: v0.10
    [ 9.102014] CRAT table not found
    [ 9.102024] Finished initializing topology ret=0
    [ 9.102177] kfd kfd: Initialized module
    [ 9.102941] checking generic (c0000000 3d0000) vs hw (c0000000 10000000)
    [ 9.102951] fb: switching to radeondrmfb from VESA VGA
    [ 9.103002] Console: switching to colour dummy device 80x25
    [ 9.104030] [drm] initializing kernel modesetting (SUMO 0x1002:0x9647 0x1179:0xFC62).
    [ 9.104059] [drm] register mmio base: 0xFEB00000
    [ 9.104063] [drm] register mmio size: 262144
    [ 9.104144] ATOM BIOS: Toshiba
    [ 9.104219] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
    [ 9.104227] radeon 0000:00:01.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
    [ 9.104231] [drm] Detected VRAM RAM=512M, BAR=256M
    [ 9.104235] [drm] RAM width 32bits DDR
    [ 9.104379] [TTM] Zone kernel: Available graphics memory: 3821360 kiB
    [ 9.104390] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
    [ 9.104394] [TTM] Initializing pool allocator
    [ 9.104407] [TTM] Initializing DMA pool allocator
    [ 9.104455] [drm] radeon: 512M of VRAM memory ready
    [ 9.104459] [drm] radeon: 1024M of GTT memory ready.
    [ 9.104497] [drm] Loading SUMO Microcode
    [ 9.124664] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 3655, fw id: 582762
    [ 9.124685] psmouse serio1: synaptics: Toshiba Satellite L775D detected, limiting rate to 40pps.
    [ 9.160285] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
    [ 9.170455] Linux video capture interface: v2.00
    [ 9.179293] mousedev: PS/2 mouse device common for all mice
    [ 9.223473] [drm] Internal thermal controller without fan control
    [ 9.223622] [drm] Found smc ucode version: 0x00011200
    [ 9.223730] [drm] radeon: dpm initialized
    [ 9.266919] [drm] GART: num cpu pages 262144, num gpu pages 262144
    [ 9.282200] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
    [ 9.282345] radeon 0000:00:01.0: WB enabled
    [ 9.282349] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88009b70ac00
    [ 9.282351] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff88009b70ac0c
    [ 9.283078] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90010f32118
    [ 9.283081] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [ 9.283082] [drm] Driver supports precise vblank timestamp query.
    [ 9.283084] radeon 0000:00:01.0: radeon: MSI limited to 32-bit
    [ 9.283121] radeon 0000:00:01.0: radeon: using MSI.
    [ 9.283145] [drm] radeon: irq initialized.
    [ 9.298245] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
    [ 9.298931] rtlwifi: rtlwifi: wireless switch is on
    [ 9.299718] [drm] ring test on 0 succeeded in 1 usecs
    [ 9.299728] [drm] ring test on 3 succeeded in 3 usecs
    [ 9.307045] sound hdaudioC0D2: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
    [ 9.307049] sound hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [ 9.307053] sound hdaudioC0D2: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
    [ 9.307055] sound hdaudioC0D2: mono: mono_out=0x0
    [ 9.307058] sound hdaudioC0D2: inputs:
    [ 9.307061] sound hdaudioC0D2: Mic=0x18
    [ 9.307065] sound hdaudioC0D2: Internal Mic=0x12
    [ 9.315899] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card0/hdaudioC0D2/input9
    [ 9.316387] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
    [ 9.316507] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
    [ 9.349814] [drm] ring test on 5 succeeded in 1 usecs
    [ 9.369840] [drm] UVD initialized successfully.
    [ 9.370279] [drm] ib test on ring 0 succeeded in 0 usecs
    [ 9.370314] [drm] ib test on ring 3 succeeded in 0 usecs
    [ 9.524205] rtl8192ce 0000:04:00.0 wlp4s0: renamed from wlan0
    [ 9.769931] uvcvideo: Found UVC 1.00 device TOSHIBA Web Camera - MP (04f2:b289)
    [ 9.788893] input: TOSHIBA Web Camera - MP as /devices/pci0000:00/0000:00:13.2/usb5/5-4/5-4:1.0/input/input12
    [ 9.789309] usbcore: registered new interface driver uvcvideo
    [ 9.789319] USB Video Class driver (1.1.1)
    [ 9.871399] cfg80211: World regulatory domain updated:
    [ 9.871412] cfg80211: DFS Master region: unset
    [ 9.871417] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
    [ 9.871425] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
    [ 9.871431] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
    [ 9.871436] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
    [ 9.871441] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
    [ 9.871447] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
    [ 9.871453] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
    [ 9.871457] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
    [ 9.871463] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
    [ 9.890507] [drm] ib test on ring 5 succeeded
    [ 9.911771] [drm] radeon atom DIG backlight initialized
    [ 9.911776] [drm] Radeon Display Connectors
    [ 9.911777] [drm] Connector 0:
    [ 9.911779] [drm] VGA-1
    [ 9.911780] [drm] HPD2
    [ 9.911782] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
    [ 9.911783] [drm] Encoders:
    [ 9.911784] [drm] CRT1: INTERNAL_UNIPHY2
    [ 9.911786] [drm] CRT1: NUTMEG
    [ 9.911787] [drm] Connector 1:
    [ 9.911788] [drm] LVDS-1
    [ 9.911789] [drm] HPD1
    [ 9.911790] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
    [ 9.911791] [drm] Encoders:
    [ 9.911792] [drm] LCD1: INTERNAL_UNIPHY2
    [ 9.911793] [drm] LCD1: TRAVIS
    [ 9.911794] [drm] Connector 2:
    [ 9.911795] [drm] HDMI-A-1
    [ 9.911796] [drm] HPD5
    [ 9.911798] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
    [ 9.911799] [drm] Encoders:
    [ 9.911800] [drm] DFP1: INTERNAL_UNIPHY1
    [ 10.016569] [drm] fb mappable at 0xC0478000
    [ 10.016576] [drm] vram apper at 0xC0000000
    [ 10.016578] [drm] size 5787648
    [ 10.016580] [drm] fb depth is 24
    [ 10.016582] [drm] pitch is 6400
    [ 10.016970] fbcon: radeondrmfb (fb0) is primary device
    [ 10.078763] Adding 8388604k swap on /dev/sda2. Priority:-1 extents:1 across:8388604k FS
    [ 10.143532] Console: switching to colour frame buffer device 200x56
    [ 10.150308] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
    [ 10.150312] radeon 0000:00:01.0: registered panic notifier
    [ 10.164191] [drm] Initialized radeon 2.40.0 20080528 for 0000:00:01.0 on minor 0
    [ 10.194853] cfg80211: Calling CRDA for country: US
    [ 10.231380] cfg80211: Regulatory domain changed to country: US
    [ 10.231393] cfg80211: DFS Master region: FCC
    [ 10.231397] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
    [ 10.231406] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
    [ 10.231413] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
    [ 10.231419] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
    [ 10.231425] cfg80211: (5490000 KHz - 5600000 KHz @ 80000 KHz), (N/A, 2300 mBm), (0 s)
    [ 10.231429] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2300 mBm), (0 s)
    [ 10.231434] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
    [ 10.231439] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
    [ 10.422003] XFS (sda3): Mounting V5 Filesystem
    [ 10.837256] XFS (sda3): Ending clean mount
    [ 10.899226] systemd-journald[187]: Received request to flush runtime journal from PID 1
    [ 11.195453] microcode: CPU0: new patch_level=0x03000027
    [ 11.195496] microcode: CPU1: new patch_level=0x03000027
    [ 11.195601] microcode: CPU2: new patch_level=0x03000027
    [ 11.195693] microcode: CPU3: new patch_level=0x03000027
    [ 12.465476] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
    [ 13.726328] wlp4s0: authenticate with 00:1e:2a:6f:46:f8
    [ 13.745730] wlp4s0: send auth to 00:1e:2a:6f:46:f8 (try 1/3)
    [ 13.753012] wlp4s0: authenticated
    [ 13.755130] wlp4s0: associate with 00:1e:2a:6f:46:f8 (try 1/3)
    [ 13.758031] wlp4s0: RX AssocResp from 00:1e:2a:6f:46:f8 (capab=0x411 status=0 aid=3)
    [ 13.758283] wlp4s0: associated
    [ 13.758302] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
    [ 23.961417] PM: Syncing filesystems ... done.
    [ 24.305227] PM: Preparing system for mem sleep
    [ 24.310243] Freezing user space processes ... (elapsed 0.001 seconds) done.
    [ 24.311535] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
    [ 24.311542] PM: Entering mem sleep
    [ 24.311898] Suspending console(s) (use no_console_suspend to debug)
    [ 24.320753] wlp4s0: deauthenticating f

    Suspend has always been problematic under Linux. It seems to be hit or miss for the most part, but here are some things you can try:
    Use an LTS kernel, tuxonice, pm-utils, etc. See Suspend and Hibernate
    Try a different graphics driver
    Tweak the driver module parameters or build your own driver.
    Unfortunately I don't have experience with the radeon driver, so I can only give you ideas.

  • Lenovo G770 Fan not spinning up after resume from sleep or hibernate

    Hi guys,
         My lenovo G770 is facing an issue where when ever I resume the system from either sleep mode or hibernate, the fan does not spin up, as a result I have to either restart the system or open the system, pull the wire of the fan and put it back in the power socket.
    Lets make 2015 the year of the #DO
    Did I or someone help you today? Press the star on the left to thank them with a Kudo!
    Solved!
    Go to Solution.

    Hey Abdul,
    Welcome back.   If the fan runs normally on first boot until you suspend / resume, then I might imagine this is power management quirk, or something confused in the embedded controller.
    1) Try going into BIOS and reload defaults - this might refresh values there.   
    2) Try uninstall / reinstall power management driver and the energy cut software (Idea power manager).
    Did you recently update BIOS or drivers?
    I would also try some temp monitoring software just to see how CPU temps run after you come back from sleep to see if the fan should be running.
    Mark
    ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
    Mark Hopkins
    Program Manager, Lenovo Social Media (Services)
    twitter @lenovoforums
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Xfce4-panel doesn't autohide after resuming from suspend

    I have the panel set to autohide but after suspend it locks and I have to mess around with the settings a lot to get it to autohide again as it should (or kill it and restart).
    Has anybody experienced the same problem?
    Thanks in advance,
    John.

    Thanks for the command I didn't know that.
    I've since changed the panel so that it's not the full width of the screen (and set it automatically increase the length). This seems to work for me I don't seem to get the stuck panel problem anymore.

  • Wifi is not auto connect after resume from sleep

    I keep my Mac Book Pro up-to-date with software updates.
    I recently update to OS X 10.8.3 (12D78).
    Since then when I open my laptop after closing it and put it to sleep the wifi connection does not re-connect automatically.
    I have to click on the wifi sign near the clock and select the network to connect to.
    How can I make it connect automatically like it used to?

    Wifi problems seem to crop up a lot on here and unfortunately there doesn't seem to be a 'one fix' solution.
    However, sometimes any one of the following can help although, unfortunately, not always - in no particular order:
    Check wifi security - if it's WEP change it to WPA or WPA2 (preferably, as it's more secure)
    Change the wifi channel on the router
    Create a new Network Location: http://support.apple.com/kb/HT5289
    Reboot the router
    Also take a look at this link and the links within the article for other ideas. They mainly reference Lion, but still seem to be relevant to Mountain Lion:
    http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/?utm_source=feed burner&utm_medium=feed&utm_campaign=Feed%3A+osxdaily+%28OS+X+Daily%29&utm_conte n t=FaceBook
    ...and this link:
    http://osxdaily.com/2012/11/30/resolving-stubborn-wi-fi-connection-problems-in-m ac-os-x/

Maybe you are looking for