XFi extreme music front panel audio.

?Hello everyone I've got a question about connecting the front panel audio on my extreme music. Is it possible to hook up my FP audio connection thats built in to my case or do I have to have the creative front panel for it to work? My case?has 2 fp connectors, for high def and the other for regular audio, if that hel
ps.
?thanx?
Omega.
Message Edited by BlackOmega on 02-05-2009 0:08 [email protected]

You have to get the X-Fi I/O Dri've. Unfortunately Creative doesn't sell it anymore themselves. You can find it online, though refurbished.

Similar Messages

Connecting the chassis-mounted front panel audio I/O module to the X-Fi Extreme Mu

Hello to everybody.
Many pc chassis provide two audio connectors on the front side, usually for the headphones with microphone.
I need to know if I can connect the chassis-mounted front panel audio I/O module to the Sound Blaster X-Fi Extreme Music.
I saw that the X-Fi Extreme Music has the internal connector (named AD_EXT) to connect . Is there a pin mapping of the AD_EXT connector? Is it possible to connect the chassis-mounted front panel I/O module cable to the proper pin of the AD_EXT connector?
Thank you.

Hi and thank you for your response.
Unfortunatelly I actually haven't got a X-Fi card, because I need to know if I can connect the chassis-mounted front panel audio I/O module to the card before buying it.
For this reason I don't know what is the J you're talking about. Is it an internal connector avaiable in the X-Fi Extreme Music card? Can I use this J to connect the chassis-mounted front panel audio I/O module to the card?
Thank you.

Sound only plays in Front left speak on Windows 7 with Xfi Extreme Music??

I have Xfi Extreme Music (SB0640). In installed the lastes drivers for windows 7 (<a rel="nofollow" href="http://forums.creative.com/t5/forums/postpage/board-id/#]Creative Sound Blaster X-Fi series driver 2.8.003 [/url]), When I run a speaker test all 6 speakers work, however when I use media player, media center etc. Only the front left speaker works.
Do I need to install creative Alchemy?
Console Launchers does not load on boot
Any asistance will be appreciated
Thanks in advance

NRe: Sound only plays in Front left speak on Windows 7 with Xfi Extreme Music? You will need to have the Creative Console Launcher which will let you have CMSS-3d or Creative Multichannel Surround Sound. You can find the newest version for your card here......
<a rel="nofollow" href="http://support.creative.com/downloads/download.aspx?nDownloadId=094"]http://support.creative.com/downloads/download.aspx?nDownloadId=094[/url]
Honestly though, dont bother with just that. Get Daniel K.'s X-FI support pack which is updated with the newest drivers and applications for your card. Plus, he tweaked those with fixes for installation/integration? under operating systems other than XP.
That can be found here.......
<a rel="nofollow" href="http://rapidshare.com/files/234436040/XFI_SupportPack_2_0.exe"]http://rapidshare.com/files/234436040/XFI_SupportPack_2_0.exe[/url]
And the link is still good.

CD-ROM Audio Connector on XFI-Extreme Music Addit

Hi Guys,?I was looking at the specs on the XFI-Extreme Music Addition card. I do not see any mention of an internal connector to connect the CD/DVD rom to the sound card for listening to audio CDs. Does this card not have such a connector? How do you listen to audio CDs without such a cable connecting these devices. Thanks in advance?

Hi Stormy 3?Had that unchecked. Thanks? a lot. Now I have learnt something new. I always thought you needed that cable. And the Audigy ZS 2 was the first sound card I had that came with a cable to connect to the digital slot on the ROM dri've. All the other cards I had only had the analogue cable. Thanks for the help. Much appreciated.

Front Panel Audio - P7N Sli Platinum Question

I am having trouble getting the front panel audio working - I want it set up so that when I plug my headphones in the speakers mute and the headphones take over.
I have the following:
Case - ThermalTake Armor VA8003BWS - http://www.thermaltake.com/product/Chassis/fulltower/armor/va8003bws.asp
MB - P7N SLi Platinum
Sound Card - Create Labs Xfi Gamer
I have done the following:
1. Disabled onboard audio in Bios (should I turn this back on?)
2. Went into Creative Console Launcher and checked the 2 options that I want it to automatically enable headphone settings and mute speakers when headphone jack is connected.
3. Connected 10 pin wire in case labeled (Azalia) to the motherboards Jaud1 (my MB manual says it is Azalia 1.0 compliant). The case also has an AC'97 connection (on the same wire as Azalia but I didn't use this because of what I read in MB manual about Azalia 1.0 compliant).
4. The case also came with this 10 pin black block that has all the Azalia descriptions on the side (Port 1 L, Port1 R, Port2 R, Sense_Send, etc. - I tried plugging the Azalia connector into this and then this into the Jaud1 but still nothing).
Not sure if it matters but my headphones are Plantronics Gaming Audio 770 (not USB).
Any suggestions?

Quote from: [LT]Eternalbliss on 21-June-08, 03:43:49
I've just recently had this similar problem. I think the issue in your case is step 3. I believe you should connect the Azalia 10pin wire to your X-fi card, not the mobo.
My problem was that i had connected AC97 10pin wire to my X-fi, after which plugging in my headphones didn't mute my speakers.
That was the problem - works great now! Thanks

Titanium Fatal1ty Pro and front panel audio

So I hooked up my case's front panel audio cable to the Titanium card and used the front panel connectors.
The sound quality is noticeably worse than using the back plugs. When I use the front panel mic, I also hear artifacts in the sound. When I play a game, I hear slight buzzes in accordance to what is coming out of the speakers.
I'm wondering if this is just the quality of my cases's cables or if it also happens with the official creative front panel accesory.
Anybody want to comment on quality?

/Re: Titanium Fatalty Pro and front panel audioQI had an older Audigy 2 dri've connected to my X-Fi Xtreme Music and that never had any interference. The X-Fi dri've bay can't be bought separately anymore.
When I switched to a newer X-Fi without a front panel, I used the case connectors and the sound quality was awful.
I think it's the way the connectors are wired and the build quality. Despite the really awful drivers Creative ship for their cards, the hardware's actually pretty good.
There're some guides on how to rewire front panel connectors to reduce noise:
http://www.head-fi.org/forum/thread/...ase-audio-jack?(rewire ground in case connector)
http://www.evga.com/forumsarchi've/tm.asp?m=00726856&mpage=&key=&#00726856?(shield front panel cable in insulating tape).

K9N2G Neo Front panel audio not working

I have plugged in various cases and i/o bays into the audio connector on this mb and NONE of them work. Yes I have tried the "disable detection" option with no luck. I am currently trying to use a silverstone fp32 i/o bay that definately supports hd audio but it still doesn't work. I made no wiring mistake as it was a plug and not seperate wires.
http://www.silverstonetek.com/products/p_contents.php?pno=fp32
What do I have to do to get front panel audio that was promised with this board?
edit: you know I have NEVER had trouble with AC97 yet I have NEVER gotten HD audio to work properly EVER

It doesn't follow AC97. But it is a Realtec chip, and they often run into problems. For example they'd like their drivers installed while in SafeMode.
Where exactly did the problem come up? Is the HD controller enabled, (BIOS)?
Is this relevant, stolen from the Englizsch only manual:
"When you are playing the first audio source (for example: use Windows Media
Player to play DVD/VCD), the output will be played from the rear panel, which is the
default setting.
Then you must to select the Realtek HD Audio front output from the scroll list
first, and use a different program to play the second audio source (for example: use
Winamp to play MP3 files). You will find that the second audio source (MP3 music) will
come out from the Line-Out audio jack of Front Panel."
Off: Think this is the first time this board come before my eyes in this forum.

Z97g43 connect front panel audio to computer case

I have z97g43.
Front panel audio computer case to mainboard not work.
i have connect:
JAUD1
mainboard chassis ( all pin available connected )
mic_L mic_L
mic_r mic_power
headphone_r headphone_r
headphone_L headphone_L
ground ground
not connect:
Sense send
mic detenction
headphone detenction
what is the right schematic connect?
thanks

What case do you have? If it is an older case with AC97 audio then you would need to purchase something like one of these: http://www.amazon.com/s/?ie=UTF8&keywords=hd+audio+front+panel&tag=googhydr-20&index=electronics&hvadid=54539991636&hvpos=1t2&hvexid=&hvnetw=g&hvrand=11069445173547096755&hvpone=&hvptwo=&hvqmt=b&hvdev=c&ref=pd_sl_2w99a9udvo_b
I simply got me an inexpensive case for my last upgrade since I also needed front panel USB 3 and up to date card reader in addition to the HD audio. My case was only $10 more (free shipping at time of purchase ) than the front panel module I needed so I got the new case you see in my signature instead.

Internal connectors, front panel audio cennector (10-1 pin AA

i have a Creative Sound Blaster Audigy 2 ZS, and i want to connect me front panel audio connecters to me soundbord, how to do that. i have tryed to download the online manual, but it is corrupt/error so no help there.
can some one help me
question 2, do some one have a manual for Creative Sound Blaster Audigy 2 ZS, or can link one thats work?
Med venlig hilsen / Mit freundlichen Gr?en / Best regards
Allan

Quote from: [LT]Eternalbliss on 21-June-08, 03:43:49
I've just recently had this similar problem. I think the issue in your case is step 3. I believe you should connect the Azalia 10pin wire to your X-fi card, not the mobo.
My problem was that i had connected AC97 10pin wire to my X-fi, after which plugging in my headphones didn't mute my speakers.
That was the problem - works great now! Thanks

870A-g54 front panel audio missing from bios

Boy is this motherboard full of glitches. Teaches me a lesson about buying the cheapest for crossfire.
I would really love to use my front panel audio. Only problem is my front panel audio isn't in the BIOS!
When i bought my 870A-G54 I had to do a BIOS flash to support my six core CPU. Could the BIOS flash have changed my BIOS menu and taken away the front panel audio setting?
Lol does the motherboard even have an option to turn front panel audio on and off?
I had the bios flashed in the store the moment i baught it so i dont know how the bios looked before the flash. The Guy failed to flash my board because he had the wrong bios update and it was too big. So i had to download the right one from msi myself. People like that shouldn't work in computer stores.
My front panel audio has one of those single plug and go audio cables so im shure i couldn't install it wrong, even had the manual next to me.
Am i to be stuck without front panel audio??

Quote from: Stu on 20-October-11, 03:51:31
BIOS does not have any options for front panel audio, it is controlled by the Realtek Audio Manager control panel.
What's the exact problem you're having?
Well i plug in my headphones to front audio and the software should recognize it and light up the ports on screen. But they stay greyed out and i have no mic or audio.
On my old asus motherboard i had to make shure front panel audio is turned on sorry for the confusion.
any idea why it doesn't pick up my headphones?
Ive tried diffrent headphones lol they dont work either

Front panel audio jack is not working on K9N Neo V2

My front panel audio jack is not working on K9N Neo V2. I check the JAUD1 cable and it appears to be connected to the front panel audio jack. My soundcard driver cannot detect any gadgets when I plug it in the front panel. My audio drivers and BIOS are up to date. Is there any known solution to this? My computer is only a few months old and I have not tried the front audio jack until recently. I'm on Vista home premium btw.
Also, I've got another problem, my processor is AMD 64x2 4400+ overclocked to 2.63Ghz. I've been using that clock value ever since I built this computer and stress tested the processor and found that it would not cause any problems like hanging or overheating. However, I recently decided the need for AMD's Cool & Quiet technology and enabled it. It caused BSODs every few days or per week that didn't happen before. I tried it with the default clock value and it still causes BSODs. Can someone help me?

Quote
Thanks. Its ironic that disabling it actually enables it.
It has to day with the front panel audio wiring of your case. How many wires are there that can be connected to the board's pin header?
Quote
Sound quality isn't very good
Can you be more descriptive? Is the quality better if you plug the headphone into one of the jack at the back panel? (Also, make sure you tell the Realtek HD Audio Manager, that a headphone is connected (and not regular speakers).

MSI P965 Platinum - Front Panel Audio u/s

Finally after managing to get XP Pro SP1 CD to install, I have a stable system, and thanks to those whom freely gave advice.
But we hit the next issue with this motherboard, the front panel audio.
Firstly the Realtek detection software doesn't detect anything plugged into the front panel.
Connected the cables as follows from my Coolermaster Stacker case;
mobo = case wires/colour
pin1 aud-mic = mic-in - yellow
pin2 aug-gnd = gnd - black
pin3 aud-mc-bas = mic-pwr - red
pin4 aud-vcc = empty
pin5 aud-fpout-R = R out - green
pin6 aud-ret-R = R ret - green
pin7 hp-on = empty
pin8 key
pin9 aud-fpout-L = L out - white
pin0 aud-ret-L = L ret - white
The above pin out gives nothing at all, but audio from rear ports on the computer motherboard is fine.
I also tried the following,
where the microphone wires were left disconnected, therefore just the speakers plugged into the front panel audio header
mobo = case wires/colour
pin1 aud-mic =
pin2 aug-gnd = gnd - black
pin3 aud-mc-bas =
pin4 aud-vcc = empty
pin5 aud-fpout-R = R out - green
pin6 aud-ret-R = R ret - green
pin7 hp-on = empty
pin8 key
pin9 aud-fpout-L = L out - white
pin0 aud-ret-L = L ret - white
The above still gave me no audio out from the front panel.
Intrestingly if I leave the front panel audio header blank, I still get rear audio fine, where I would have expected to have put jumpers across the L and R outputs as is the norm.
I have removed the front panel from the computer to ensure that the wires terminate OK, and have not been pulled out/off.
Have I plugged in the wires correctly?
Is there some hidden setting that I have missed, I admit that I do not like the Realtek audio software?
I cannot find any way to boost the microphone input since Realtek audio software has been installed.
One day case/mobo manufactures will use a standard for the front panel headers and front panel audio headers, and we will have a simple single plug to insert, rather than a group of single fiddly connectors that have to be attached to a header that was at the last minute attached to the motherboard as far away from the front of the case, and in the darkest most fiddle corner.
Oh well......
Cheers

AaronYuri - you're are so right there my friend. I just pity Joe User whom might attempt such a move themselves.
In the end my entire issue was software related, and that has to be blamed on Realteks software, far too many options approached from far too many different angles. Audio is really simple, plug your cables in, and it should just work, certainly in the simple case of 2-1 speakers and a microphone. Why exactly it took a couple of hours to figure out how to get the front panel microphone to be seen in the first place, let alone any signal, is beyond me.
So my cables were all connected correctly as per the MSI manual, confirmed by my Abit manual and other post here and on other forums.
In the Realtek MSI audio software, on the I/O Audio tab, connector settings, I had to select 'disable front panel jack detection' and 'mute rear panel output when front headphones plugged in'. The other option here 'enable auto pop up...' is unchecked.
After this the Realtek software mentioned something about a new profile had been set up?
I then went to Windows Control Panel, Sounds and Audio devices, and selected the voice tab, on this page I selected 'mic IN at front panel [pink]' from the drop down list for Voice Recording'. Proceeded to 'test hardware' and the microphone is now working. This option to select the input in the drop down list was not available before.
All a bit of POKE and HOPE.
But we seem to be there.

No Front Panel Audio

I have an SB Audigy 2 ZS and an Antec Aria case. I would like to use the front panel audio that uses the Intel Standard plug but acording to Creative tech support they don't support it.
The tech basically said that they don't know anything and I have to ask the forum if I want any useful information about the card. I didn't realize Creative tech support was so bad (broke several rules of the trade). But I am here to ask you guys now.
Is there a way to hook up the front panel audio ports to the sound card? My dell uses that white plug to do this. Does anyone know of an adapter that uses the intel plug on one side and the white plug so we can use the fron panel audio and mic jacks?
Thanks.

No-one replied to my similar question here, so I did some googling and posted other places online. Here are some links that should help you in your problem. I have an Antec case myself, and while I have not tried this yet, I think it should work, assuming your audio connector is similar to mine. My Antec P60 case has an Intel-spec AC97 front panel connector, but it also branches into individual leads for non-standard setu
ps.
If you have the correct connector on your Audigy2, this should work. Here are the links I have:
http://www.hardforum.com/showthread.php?t=830840
http://www.driverheaven.net/showthread.php?s=597f798243e2dfcc492d0fce8dd0d&t=5 279&page=&pp=5
http://forums.devhardware.com/t5584/s.html
Someone at Creative Labs should make a sticky out of this procedure and put it in a note at the top of the thread; I bet this gets asked a lot.

Audigy front panel audio connectio

I have a audigy ls model and i was wondering if there is a way to connect this card to my cases front panel audio i/o's? does anyone know? i checked the web site and couldnt find anything either way.

Tricky0502 wrote:
I have a audigy ls model and i was wondering if there is a way to connect this card to my cases front panel audio i/o's? does anyone know? i checked the web site and couldnt find anything either way.
Yes it is possible --> http://audigy2zshowto.blogspot.com/
jutapa

Fronta panel audio connections on KM4M

I got a pc case, and the cables for the front panel audio are: left , right , mic, and ground. The front panel works fine, but the rear ports dont.
What should i do to make it work?
Maybe conect left in with left out and right in with right out?

There must be a return from fron panel audio for rear ports to work
What i did was to solder a piece of solid wire on the jumper, and simply plug in the front panel audio left and right in that wire and it works FINE
to Wonkanoby: u know fak all dont u?

XFi extreme music front panel audio.

Similar Messages

Maybe you are looking for