XFI Fatality Gamer + GigaWorks S750 + Decoder DDTS-

Dear Sir,
Im using XFI Fatality Gamer + GigaWorks S750 + Decoder DDTS-00 ( just bought it ) and the question is I feel no difference ( Dolby Digital and DTS Effect ) when I'm not using the Decoder.
What I've done is I already :
Connect cable from my soundcard to switch box and then another cable I connect it from my Gigaworks to switch Box. And then from the switch box it self I connect it into the decoder. All the cable im using is the standard from Creative. I haven't used any coax or optical cable.
Looking forward and really appreciated for the assistance.
Many Thanks.

To connect your Soundblaster NX to your DDTS-100 decoder, and let the decoder handle the DD/DTS decoding, you have to connect a digital/optical/coax cable, from the digital output of the NX, to one of the digital inputs on the decoder.. Also make sure you have set the settings on the souncard, to "digital output only", so that the decoder can decode the encoded digital streams, sendt by the soundcard..
if you want to connect your soundcard to the decoder via analog cables, and let the soundcard do the decoding it self, you will need to use a 7.1 analog-audio cable, that comes with both the decoder and the speaker system. Connect the audio cable from the analog output on the soundcard, to the input "switch-box", and set the switch-box to "PC-audio". Also make sure you have connected your speakers to the "switch-box".

Similar Messages

  • Anyone bought the Gigaworks speakers + Decoder DDTS-100 Packa

    Hi everyone,
    Anyone bought the Gigaworks speakers + Decoder DDTS-00 Package but dun need the decoder? Please let me know? I need a decoder badly.. thanks..
    Kekin

    To connect your Soundblaster NX to your DDTS-100 decoder, and let the decoder handle the DD/DTS decoding, you have to connect a digital/optical/coax cable, from the digital output of the NX, to one of the digital inputs on the decoder.. Also make sure you have set the settings on the souncard, to "digital output only", so that the decoder can decode the encoded digital streams, sendt by the soundcard..
    if you want to connect your soundcard to the decoder via analog cables, and let the soundcard do the decoding it self, you will need to use a 7.1 analog-audio cable, that comes with both the decoder and the speaker system. Connect the audio cable from the analog output on the soundcard, to the input "switch-box", and set the switch-box to "PC-audio". Also make sure you have connected your speakers to the "switch-box".

  • GigaWorks S750 with DDTS-100 Decoder - Center/Sub channel not working.

    I have the S750 with the DDTS decoder and everything was working fine until the other day. I have tested several times and from what I can tell there is no signal being sent from the sub to the decoder from the Center/Sub channel wire (S750 sub) to the decoder. Plugging the center speaker wire into the left speaker jack will produce a test signal so I know it is not the speaker. Seems the sub has gone out along with the center channel. I checked the fuse and all is well. Please help...
    Message Edited by aosbeck on 04-15-2008 06:19 PM

    shin8,
    Are you getting proper output if you use the "TEST" button on the remote control?
    Daniel

  • Creative Labs What Is Wrong With Your Manufacturing!!!??!?! RE: Gigaworks S750, XFI e

    Ok this is a straight forward RANT! In building my new computer I decided to let Creative be my folks for sound since I've always been impressed with the EAX and surround sound, the first time I played EQ in 4. 3D sound on a first gen SBLi've card I was in awe. I've bought so many speakers and sound cards since and been happy. So I decide with my new computer I will buy the XFI Fatality, Progamer headphones with mic, and the Gigaworks s750 7. speakers. Well I got the headphones and the sound card first, right off the headphones left side sounded blown out to me, so I sent them back, and the new pair worked fine. The XFI card became the issue next I had the cracking and popping noises, I made a few tweaks and was able to kill most of it, but I have 4 gigs of Ram and when I turn on the memory hole in the bios so that XP Pro 64 can see the 4 gigs brings back the popping noises. So I have to turn of 2 gigs of ram that cost me over $300 so I don't have nasty noise when I play games. Oh yea and I sent the card back as well in hopes I'd get a repaired one.... No Such Luck... So then I get to my speakers, the left rear channel is making a sound like a blown speaker so I swap the plug with another channel and its fine and the other speaker in that channel makes the noise, so I send back the sub as a RMA at a cost of $30 to me (not like giving them $800+ for broken stuff isn't bad enough... nothing like salt on the wound.) So after 2 weeks of no sound other than headphones for my gaming, I get my sub back, I hook it up and.... Now the left rear channel is totally DEAD. So now I'm PISSED, I call up and hold it together when talking to the RMA folks. They offer to send me a whole new set of speakers, so I'm thinking cool, maybe its in a cable or the box or something.... Today I get home from work and see the box, I'm like sweet new stuff and spend a good hour carefully rewiring my whole desk with the new speakers and cables. Get it all hooked up and click on the sound test for the 7. and........ The Side Left Channel is DEAD WTF!!!!!!
    !!! All I can say is it sucks there is no real competition for sound against Creative, because they know their product will be the demand and if they put out a poorly manufactured item they can get away with only so many people will even bother RMAing and will just li've with it thinking they did something wrong. I am truly disturbed by this trend and can only hope that after I actually get everything working in 6 months or so if they ever fix the noise issue with XFI and maybe a few more RMAs of my sub to get one they TEST before sending it to me... I hate to say it but I think next comp I build I'm going to have to start looking at other sound companies. Its sad to lose faith in a company you hold in such high regards for so long as pioneers. Thanks for reading, oh and CL support persons that like to pop into a message and post an idea that most anyone with an IQ over 3 would have tried in the first 5 minutes of troubleshooting only to never revist the thread because your goal is the create the illusion of support on the boards by making a certain number of posts regardless for image sake, don't bother responding since due to my past experience with your phone support I know more about your products than most of you... Oh and your database of issues/fixes doesn't count as knowledge its the results of your customers helping each other with issues and you all pool the fixes they come up with confirm them, and post them as?fixes. I wont rule out a couple of them your crack teams might stumble across like the first guy that discovered that touching electrical wires is bad and put shielding on them, well maybe the guy that found him did it.... Rant off =)

    I'll close this thread as I don't think any good discussion can come from it, I think you just wanted to get your point across so I'll leave the thread here but closed, and will pass on specific feedback from it.
    I do not see any reason for you to attack the moderators. As we have already stated (and is detailed in the announcement at the top of each board), we are here to make sure the board stays running and people do not post inappropriate content (and abide by the rules), we are not here to provide support. We may post sometimes with advice people could try, but we not trying to create any illusion that support is offered on this board, as it isn't. That is what Customer Support is for.
    Cat

  • Creative Labs What Is Wrong With Your Manufacturing!!!??!?! RE: Gigaworks S750, XFI etc.

    Ok this is a straight forward RANT! In building my new computer I decided to let Creative be my folks for sound since I've always been impressed with the EAX and surround sound, the first time I played EQ in 4.1 3D sound on a first gen SBLive card I was in awe. I've bought so many speakers and sound cards since and been happy. So I decide with my new computer I will buy the XFI Fatality, Progamer headphones with mic, and the Gigaworks s750 7.1 speakers. Well I got the headphones and the sound card first, right off the headphones left side sounded blown out to me, so I sent them back, and the new pair worked fine. The XFI card became the issue next I had the cracking and popping noises, I made a few tweaks and was able to kill most of it, but I have 4 gigs of Ram and when I turn on the memory hole in the bios so that XP Pro 64 can see the 4 gigs brings back the popping noises. So I have to turn of 2 gigs of ram that cost me over $300 so I don't have nasty noise when I play games. Oh yea and I sent the card back as well in hopes I'd get a repaired one.... No Such Luck... So then I get to my speakers, the left rear channel is making a sound like a blown speaker so I swap the plug with another channel and its fine and the other speaker in that channel makes the noise, so I send back the sub as a RMA at a cost of $30 to me (not like giving them $800+ for broken stuff isn't bad enough... nothing like salt on the wound.) So after 2 weeks of no sound other than headphones for my gaming, I get my sub back, I hook it up and.... Now the left rear channel is totally DEAD. So now I'm PISSED, I call up and hold it together when talking to the RMA folks. They offer to send me a whole new set of speakers, so I'm thinking cool, maybe its in a cable or the box or something.... Today I get home from work and see the box, I'm like sweet new stuff and spend a good hour carefully rewiring my whole desk with the new speakers and cables. Get it all hooked up and click on the sound test for the 7.1 and........ The Side Left Channel is DEAD WTF!!!!!!
    !!! All I can say is it sucks there is no real competition for sound against Creative, because they know their product will be the demand and if they put out a poorly manufactured item they can get away with only so many people will even bother RMAing and will just live with it thinking they did something wrong. I am truly disturbed by this trend and can only hope that after I actually get everything working in 6 months or so if they ever fix the noise issue with XFI and maybe a few more RMAs of my sub to get one they TEST before sending it to me... I hate to say it but I think next comp I build I'm going to have to start looking at other sound companies. Its sad to lose faith in a company you hold in such high regards for so long as pioneers. Thanks for reading, oh and CL support persons that like to pop into a message and post an idea that most anyone with an IQ over 3 would have tried in the first 5 minutes of troubleshooting only to never revist the thread because your goal is the create the illusion of support on the boards by making a certain number of posts regardless for image sake, don't bother responding since due to my past experience with your phone support I know more about your products than most of you... Oh and your database of issues/fixes doesn't count as knowledge its the results of your customers helping each other with issues and you all pool the fixes they come up with confirm them, and post them as fixes. I wont rule out a couple of them your crack teams might stumble across like the first guy that discovered that touching electrical wires is bad and put shielding on them, well maybe the guy that found him did it.... Rant off =)

    Duplicate thread.
    Cat

  • Help connect X-fi Elite Pro with DDTS-100 and Gigaworks s750

    Hi,
    I purchased a brand new Gigaworks s750 speakers system, DDTS-100 decoder and X-fi Elite Pro. I connected the DDTS-100 and Elite Pro using Optical Fibre output from the audio console of X-fi Elite Pro to the optical digital input of DDTS-100. With the cables supplied with s750, I connected it to the Decoder DDTS-100. The problem is I am not getting any sound from the rear speakers and the front speakers. Only the centre speakers and the side speakers are producing sound. I could hear loud hissing sound and very very low volume of the music from the front speakers and no sound from the rear speakers. I can hear good quality sound from the centre speakers and average quality sound from the side speakers. What could possibly have gone wrong with my setup ? Somebody please help me. Thanx in advance.

    Hi Richie,
    Thanq for your response. But unlike what you have mentioned, ("what may be happining is the soundcard is decoding the signal and then the ddts is trying to decode it with disatrous results"), In my setup the signal is not getting decoded two times, once by Soundcard and once by the DDTS-100. As I have mentioned that I am taking out an Optical Signal from the sound card to the DDTS-100, the signal comming out from the sound card to the DDTS is Encoded signal only. So there doesnt arise a chance that the signal is getting decoded twice. Can you think of any other reason why my setup is not working? Please let me know.
    regards,
    Rahul M

  • X-Fi Fatality Champion + Creative Gigaworks S750 7.1 Speakers + Vista x

    Current Computer specs:
    Vista Ultimate x64 Retail
    Core 2 Quad Q6600
    GeForce 8800GTX
    6GB RAM
    X-Fi Fatality Champion (basically a platinum with Xram)
    Gigaworks S750 7. speakers.
    I have the above computer, with the latest (Oct st 07) X-Fi drivers.
    I cannot set the card to 7. output mode. The option doesn't appear in the windows sound config, and if set in the Creative Audio Console it just switches itself down to 5. instantly.
    Any known solution?

    Step : Power down computer.
    Step 2: Remove Creative card.
    Step 3: Install competitor's sound card.
    Creative's drivers are known to have issues in systems with 4GB or more of RAM. The Oct st drivers are probably the worst choice, so far. You could try the Auzentech drivers, but there is no guarantee it will fix your issue.
    http://forum.stage.creative.com/showthread.php?t=24495
    You will probably need THX console from your installation CD to remap your speakers.

  • Connecting DVD-Player with GigaWorks S750

    I'm going to buy a GigaWorks S750 system. Will I need an extra decoder like the DDTS-100 when I want to connect the soundsystem with the Computer (with Audigy 2 ZS Platinum Pro) and one of these things: DVD-Player, Radio, Walkman?
    Thank's for your answers!

    No, I wouldn't bother. You can connect both radio and walkman to two of the line-in sockets on the Audigy's external hub. A DVD player can be connected using the coax or optical inputs. One thing you can't do with the Audigy 2 is use Dolby Pro Logic II for PS2 games. If you don't have a PS2 to connect then, that's not really a problem.

  • Crackling, Left Rear Channel noise, IRQs, 4 Gigs of Memory, fixes and problems with XFi Fatal

    Hello fellow troubleshooters. Well I've been working on my XFI issues since there are so many of them trying to make the one piece in my newly built system work as intended. I will put my hardware info below this post for comparison purposes if it helps you at all or for feedback/ideas. Well first off I had the crackling noise popping so on even when my machine was idle. If you have not done this yet do it
    !!! Start, Control Panel, Sounds Speech and Audio Device, Change Speaker Settings, Advanced (in device volume), ok now there is a bunch of sliders go to "options" check everything, ok now that you see all the sliders mute Everything besides: Play Control, Wave, CD Player for testing purpose. You will probably hear a difference as you do it. Especially Mic 2. Ok well that issue resolved my popping crackling noises when idle. Ok so I still have a shared IRQ issue since I have an Asus A8N32-SLI Deluxe board and the slots go as such PCI-E, PCI, PCI, PCI-E, PCI. Well since the GeForce 7800 GTX cards I have take up not just the PCI-E slot, but also the PCI slot is covered from the Huge Fan. Then the Same thing for the Second graphics card. So I have only one slot that works for my PCI Fatalty sound card. Well this forces me to share PCI IRQ between one of the Video Cards and the Sound Card. Its not a "conflict" it is simply sharing the IRQ, after the above issue fixed my popping issue this no longer was a concern. Now my big issue is that I sent my Sub Woofer in for RMA, I have the Gigaworks S750 7. THX speakers, they are great but when I really crank up the volume on them I would get the sound like a speaker was blown in the left rear channel, so I swapped another speaker in its place and I have the same problem. So the RMA folks said to send in the Sub Woofer which cost me over $30 to ship the thing only to have them tell me there is no problem. Well I had recently done RMAs on my sound card, both Video Cards, and my mother board too in hopes of fixing the next problem. So everything is new though I got a refurb on the mobo. So I'm just waiting on my Sub woofer now so I'm using my headphones and guess what I'm finding there is this noise in the left speaker, an issue I sent the headphones back for a long time ago when I was using them waiting to buy my speakers. I have the Creative Pro Gamer headphones. So now I read a post about someone else with the same issue left channel, and I have to wonder I am not alone and that usually means in Creative Labs land there probably is others with this issue that have spouses that wont let them stretch their audiophile legs with extreme volume, if this is you try it out kick up the bass, and see if you have this problem too, if so please post it here. I have no clue on this one and I am open to any ideas. Ok and the last issue!! This is the real problem I'm facing now. I play EQ2 I love my MMO titles with the occassional single player title for those short stints at the computer between work, parenting, and stuff my wife demands be started before she finishes speaking of it (those of you married know what I'm talking about). I have 2 operating systems, XP Home, and XP Pro 64. Home I use for Office, graphic design, and general applications. XP Pro 64 I use purely for gaming. All my games are installed through this OS which is on my 2 74 Gig Raptors in Raid 0, I have another Partition for XP Home, and a 3rd for all the game installs. So I recently found that after selecting Extreme Graphics option in EQ2 then moving the rest of the sliders to Max that my G5 keyboard which has a performance monitor in it showing the amount of Ram usage showed me hitting about 90% and would spilke at the same time as I found I had frame rate slowdown. So I decided to get 2 more gigs of Corsair Twin XMS 3500Pro 024x2 memory bumping me up to 4 gigs. Well I had to go into the bios I found and change a memory setting to discrete and enable the memory hole in order for XP Pro 64 and the motherboard to see the memory. At this time I was working on other things with my computer, and suddenly the popping noise came back so I'm pissed now.... But oddly its not happening in XP home, only in XP 64. So I'm thinking I may have to go to XP home for my gaming OS, then just before I install home I remember that XP home wont register 4 gigs of memory.... So I go turn off the memory hole and discrete settings and this sets the memory to 2 gigs.... Crackling sound in ALL EAX GAMES goes away.... So now clearly my issue with my sound card and EAX crackling noise is Memory related somehow. Now I have isolated it to 4 gigs of memory, but it makes me think of those folks with this issue perhaps something is amiss with their memory and how it works with timing, or onboard memory on the sound card which is a first time memory is put on a sound card?.... Any input is appreciated as to how to repair this issue, thanks for reading, below is my system set up.
    rocessor >
    ?Model:???? x AMD Athlon(tm) 64 X2 Dual Core Processor
    ??????4400+
    ?Speed:???? 2.2GHz
    ?Model Number:???? 4400 (estimated)
    ?Performance Rating:??? PR7072 (estimated)
    ?Cores per Processor:?? 2 Unit(s)
    ?Threads per Core:??? Unit(s)
    ?Type:????? Dual-Core
    ?Internal Data Cache:?? 2x 64kB Synchronous, Write-Back, 2-way set,
    ??????64 byte line size
    ?L2 On-board Cache:?? 2x MB ECC Synchronous, Write-Back, 6-way
    ??????set, 64 byte line size
    ?<Mainboard >
    ?Bus(es):???? ISA PCI PCIe USB FireWire/394 i2c/SMBus
    ?MP Support:???? 2 Processor(s)
    ?MP APIC:???? No
    ?System BIOS:??? American Megatrends Inc. 8.2
    ?System:????? System manufacturer System Product Name
    ?Mainboard:???? ASUSTeK Computer INC. A8N32-SLI-Deluxe
    ?Total Memory:???? 3.9GB DDR-SDRAM
    ?<Chipset >
    ?Model:???? Advanced Micro Devices (AMD) Athlon 64 /
    ??????Opteron HyperTransport Technology
    ??????Configuration
    ?Front Side Bus Speed:?? 2x 005MHz (200MHz data rate)
    ?Total Memory:???? 4GB DDR-SDRAM
    ?Memory Bus Speed:??? 2x 200MHz (400MHz data rate)
    ?<Video System >
    ?Monitor/Panel:??? Default Monitor
    ?Monitor/Panel:??? HP D895 HP P20 2-inch Monitor
    ?Adapter:???? NVIDIA GeForce 7800 GTX
    ?Adapter:???? NVIDIA GeForce 7800 GTX
    ?hysical Storage Devices >
    ?Removable Dri've:??? Floppy disk dri've
    ?Hard Disk:???? WDC WD2500KS-00MJB0 (233GB)
    ?Hard Disk:???? WDC WD3200JD-00KLB0 (298GB)
    ?Hard Disk:???? NVIDIA? STRIPE? 38.49G
    ?Hard Disk:???? Generic USB CF Reader USB Device
    ?Hard Disk:???? Generic USB MS Reader USB Device
    ?Hard Disk:???? Generic USB SD Reader USB Device
    ?Hard Disk:???? Generic USB SM Reader USB Device
    ?CD-ROM/DVD:???? HL-DT-ST DVD-ROM GDR860B (CD 48X Rd) (DVD 6X
    ??????Rd)
    ?CD-ROM/DVD:???? HL-DT-ST DVD-ROM GDR860B (CD 48X Rd) (DVD 6X
    ??????Rd)
    ?CD-ROM/DVD:???? HL-DT-ST DVD-ROM GDR860B (CD 48X Rd) (DVD 6X
    ??????Rd)
    ?CD-ROM/DVD:???? HL-DT-ST DVDRAM GSA-463B (CD 40X Rd, 40X Wr)
    ??????(DVD 5X Rd, 5X Wr)
    ?<Logical Storage Devices >
    ?.44MB 3.5" (A:??? N/A
    ?Applications - games - storage:233GB (5GB, 65% Free Space) (NTFS)
    ?Xp home (D:???? 24GB (5.6GB, 23% Free Space) (NTFS)
    ?CD-ROM/DVD (E:??? N/A
    ?Xp 64 (F:???? 24GB (5GB, 63% Free Space) (NTFS)
    ?Raptor games (G:?? 90GB (7GB, 8% Free Space) (NTFS)
    ?Ssdisk (H:???? 629MB (CDFS)
    ?Bf2xpack cd (I:??? 677MB (CDFS)
    ?Farstone (J:??? 00MB (CDFS)
    ?Removable Dri've (K:?? N/A
    ?Removable Dri've (L:?? N/A
    ?Removable Dri've (M:?? N/A
    ?Back up dri've (N:??? 298GB (3GB, 44% Free Space) (NTFS)
    ?Removable Dri've (O:?? N/A?EvolovE

    Evolve,
    I have the a8n-sli Premium which as you stated is basically the same board with a couple extra items. I have the latest beta bios ver -06. Since the early fall release the option which we will be talking about was available in the premium board which it I remember was Bios rev 9. I would download the latest bios rev.
    07.04 (latest beta?or go with 06)?and flash in. Here are the steps to get the proper memory options to work and I have also included my system specs to compare.
    ) Hit Del to get into Bios
    2) Go to the second tab on the top of the screen "Advanced"
    3) Select the first option in the menu "CPU Configuration"
    4) Select the first option in the "CPU Configuration" menu called "DRAM Configuration"
    5) Select Manual configuration from the first Menu item.
    6) The last two options in the same menu for DRAM are s/w remapping over 4G and h/w remapping over 4G. Select the "s/w remapping option over 4G" and enable it. Disable the "h/w remapping over 4G."?
    7) Hit f0 and save the config.
    You should now at post have 4GBws total but only 3GBs of usable memory and your X-fi should crush it in XP64 and XP32.
    My Specs
    A8n-sli premium (Bios -06)
    amd X2 4400 (~2.5 GHZ)
    4GB LL patriot memory (~228 HZ)
    X-Fi Extreme Music
    LSI 320-2e PCI express SCSI RAID controller (256MB buffer)
    2x Seagate Cheata 5K.3?dri'ves
    All water cooled
    Good Luck
    PapaH
    By the way this is defiantly a XP64 driver problem because even with h/w remapping enabled in XP32 the card sounds fine. It only happens in XP64.

  • Problema cassa posteriore sinistra gigaworks s750

    Salve, Possiedo delle creative gigaworks 7.1 s750 nuove da 4 mesi e una scheda creative x-fi extreme music nuova. Ieri l'altoparlante sinistro posteriore a smesso di funzionare. Ho fatto delle prove: ho collegato la cassa sinistra posteriore sul canale destro anteriore e la cassa funziona. Ho provato ha reinstallare la scheda sonora e riccolegato?l'altoparlante e il problema non lo risolto. Ho fatto l'ultima prova collegando le gigaworks s750 al decoder DDTS-100 con cavo ottico?alla console e il canale posteriore sinistro non funziona.Ora ho pensato che il guasto e dal subwoffer. Volevo sapere come mai questo problema?

    ti consiglio di portarlo alla creative per un controllo, avevo anch'io dei problemi con il sub dei T7900 e alla fine ho perso piu tempo a fare prove che portarlo a loro. Lo porto oggi e mi levo il pensiero. buona fortuna

  • GigaWorks S750 7.1 - Interference and Volume issue

    Please provide assistance,
    I recently purchased a the Gigaworks s750 along with Creative's Sound Blaster Audigy 2 ZS.
    Here is the problem I am encountering:
    When using it for any type of audio, DVD playback being the worst, I get a great deal of interference when turned up past 50% volume on the Gigaworks controller. And to get any sound, I have to have the volume of the controller connected to the sub at a minimum of 50%. If there is no audio, when turned up the interference is totally unbearable.
    I have the audio on my PC turned up to 100%, and this goes for every form of audio controller on my PC. If any one of these audio controllers on my PC are turned down, I get very little audio out of the speakers at all?
    Is there anyway to get rid of this noise? I would like to have my DVD movies or games with the ability to play at a reasonable volume and be able to hear the fine noises that make a surround sound system worth purchasing. At this point when turned up, 80-100% of volume on sub volume controller, I get so much interference that the only time I can hear decent quality sound is when the sub and music are loud enough to cancel out the annoying interference?
    Please help?
    Sincerely,
    Poor creative customer

    I would recommend the G550W if you don't want to risk the S750, I have an S750 set, had to have the sub replaced a single time, but was no trouble at all and only took like 4 or 5 days for the new one to arri've, sets been running perfect for more than a year now

  • Creative's software don't work, driver ok,XFI FATALITY

    Hi, i have windows 7 x64 whith XFI Fatality Extreme Gamer Pro-Series PCI.
    I installed latest official driver (from this link[url=http://support.creative.com/Products/ProductDetails.aspx?catID=1&amp;CatName=sound+blas ter&amp;subCatID=208&amp;subCatName=X-Fi&amp;prodID=15853&amp;prodName=X-Fi+XtremeGamer">http://support.creative.com/Products/ProductDetails.aspx?catID=1&amp;CatName=sound+blas ter&amp;subCatID=208&amp;subCatName=X-Fi&amp;prodID=15853&amp;prodName=X-Fi+XtremeGamer[/url]) i installed the version of 16 Jun 10...and then i tryed ALCapsViewer32 for verify if i have EAX 3, 4, 5 and XRAM ,,,, and there are........
    The problem is that the creative software don't work....for examples:
    if i start Audio Control Panel or the others software's creative it doesn't start and tells me: The device is not present or it is working in way not supported from software.
    And so i can't setting the crystalizer, SVM and more...
    ANY IDEA???

    I believe ONE topic is enough: [url=http://forums.creative.com/t5/Sound-Blaster/XFI-Fatality-Extreme-Gamer-Pro-Series-driver-ok-but-cretive-s/m-p/587039/highlight/false#M163211">http://forums.creative.com/t5/Sound-Blaster/XFI-Fatality-Extreme-Gamer-Pro-Series-driver-ok-but-cretive-s/m-p/587039/highlight/false#M163211[/url]

  • Gigaworks s750 on 2 machines

    Hi,
    Is it possible to connect GigaWorks S750 speakers to 2 machines?
    I am building a new machine but I sill need my old one and I would like to have the speakers usable on both machines. One machine has a "Sound Blaster X-Fi Xtreme Gamer Fatalty Pro Series" sound card and the other the build-in sound card from the Asus Striker Extreme but I plan to mode the X-Fi to the new machine when the old machine is no more needed.
    I will use a KVM switch.
    Thanks,
    Toresh

    From Adobe's KB:
    Can I use my software on two computers?
    If you own, or are the primary user of, a single-user or volume license Adobe product that is installed on a computer at work, you can also install and use the software on one secondary computer of the same platform at home or on a portable computer. However, you may not run the software simultaneously on both the primary and secondary computers.
    http://kb2.adobe.com/cps/195/tn_19592.html
    So, I think the answer is yes.  If you want to be real anal you could deactivate on the old machine then re-activate after testing on the new machine.  But this policy allows two machines if not operated at the same time.

  • Creative gigaworks s750 v/s logitech z5500

    I own a creative audigy 2 nx sound card and looking for the best speaker system compatible with it
    After reading the reviews at varoius sites i concluded that the best speaker systems available in INDIA are creative gigaworks s750(35000 RS. INR) and logitech z5500(25000 RS. INR),money is not a consideration all i wanna know which of these speakers is better for watching DVD movies. I am really in a delimma here as logitech z5500 has an inbuilt dolby digital and dts decoder.
    can anyone suggest me what to buy PLEAZzzzzzzzzzzz.

    The gigaworks sound a lot better or so they say. I've never heard either of these speakers, but in terms of sound quality everyone agrees the gigas are the best PC speakers money can buy.
    There are some build quality issues with the gigas though. If you look on this very forum, you'll find that many people have had 3-4 defective units in a row and others have had the system fail a few days after the warranty ran out. What percentage of the total user base this is, is unknown, but the gigas are quite popular amongst discerning pc users.

  • Problem with drivers/ sound stopping / vista32bit/ xfi fatal

    i have an xfi fatality, installed the latest drivers and since then, sound will stop at random times usually happens when i am pausing something on media player (videos) and it might come back when i reopen the video
    sometimes i will watch a video on firefox, and i might not get any sounds at all (sounds completely stop, not only per application)
    sound will come back, on its own, at random times. some times i need to restart
    i uninstalled the audio console, uninstalled the driver from system, and installed the previous version and i am still getting this problem (i wasnt getting it before)
    any solution
    thanks a lot.

    Is there anybody with any idea what the problem might be?

Maybe you are looking for