Xfi soundcard and windows xp, where can i geht the software

where can i download an actually software cd for "xfi soundcard"?at the moment i have the youpax software cd, but i want the orignal from creative?i searched for google, there is an vista software cd, but where is it for windows xp??anybody a link for me

Must have missed this in your searching then,
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=25677
And it is even on the first page of this forum for a change.

Similar Messages

  • Is JVC Everio GZ-HM330 Camcorder compatable to Mac OSx and if so where can I download the software please?

    Is my JVC Everio GZ-HM330 Camcorder compatable to Mac OSx and if so where can I download the software please?

    chrisfrommarion wrote:
    Thanks, while it worked on yours it doesn't work on mine, any other ideas?
    Are you holding down the "d" key, all by itself, just after the system shuts down for a restart?
    And how long did you hold it down?
    I held mine down for about 40-50 seconds. Then I lookat at my routers WAN light and it was flickering so I let up on the d key.
    If that does not work then maybe there is something wrong with your MBP. Is that the reason you want to run this test, something isn't right with your unit?

  • I accidentally uninstalled my photoshop cs6 and illustrator cs6 - where can I download the app again to reinstall

    I accidentally uninstalled my photoshop cs6 and illustrator cs6 - where can I download the app again to reinstall

    Download CS6 products

  • Where can I find the software updates?  Have looked all over the site!

    Where can I find the software updates for Ipad 2?  Have looked all over the site!

    You update through iTunes if you have iOS 4. If you have iOS 5 then tap Settings > General > Software Update.

  • I know that my Apple Mobile Device USB Driver is missing. It won´t reinstall or update the software. Where can I get the software so I can synch my Ipod nano again?

    I know that my Apple Mobile Device USB Driver is missing.When i try to reinstall it in the device manager it says that one of the installers is unable to reinstall the software. I don´t know where to look for the software to get the driver going again, so please help if you´ve got any solutions to my problem. I´ve spent hours and hours looking in the internet but i couldnt find anything helpful. PLEASE HELP
    PS: I´ve got a Windows 7 PC so the guy from the Apple Store refused to help me

    You need to completely uninstall iTunes from your computer and then download and install it again.
    You do know that Microsoft has a web site, right?

  • Boot camp and windows XP..can't use the "option" key to dual boot

    Hi All
    I'm a Mac newbie, but I know LOTS about windows XP. I set up windows XP to run on my brand new (5 days old) macbook. I can use bootcamp to boot from OS/X to windows XP, and everything works well o both systems (I also loaded fusion, didn't like it cause I had to keep activating Microsoft Office 2007 everytime I switched from the VM to the bootcamp method of accessing XP).
    My question..when I hold down the option key when I turn on the computer, only the Mac hard drive appears, not the windows...so, I boot into OS/X and then switch to windows from there. Any ideas why the option key only gives me the Mac HD option?
    Thanks

    In terms of AV, I'm running Mcafee AV and firewall, if that's any help knowing..I don't know if the AV changes any boot record, etc. Also, interesting when I go to the boot camp control panel when I am in windows, both "hard drives, Mac and windows" show up as folders. When I go to the control panel in the Mac OS, the Mac HD shows up as a hard drive, and the windows shows up as a folder. So...who knows!
    As for using Vista vs. windows, well, I haven't worked much with Vista, but, since many of us that need windows use programs that may not reliably work with Vista, I have stuck with XP.
    As for the use of Fusion, my point was this. I put the trial copy on and then loaded office 2007...each time I started the windows boot camp partition, or the fusion VM, I had to reactive Office 2007...this is a known problem in fusion VMware per their discussion board on the site. If you load fusion AND the fusion tools before activating Windows XP, then you only have to activate windows twice, once in bootcamp and once in fusion, but you have to look for the fusion tools and load them, they don't load by default.
    Thanks for the OS dual boot software suggestion, I'll check it out...this is not a huge problem, but, when the Apple engineers respond to my question as "hmmm...we don't know"...I'm a bit concerned. So, as an old time windows user who just switched to Mac, my initial take it...both systems have their problems, just a different set of problems...but, so far I love my Macbook.

  • I lost the grey, round shaped rubber placed under the magic trackpad to support clicking. the rubber detached from the trackpad and lost. Where can i find the thing as i am not sure whether apple sell small spare part like this?

    i had lost the grey, round shaped rubber placed under my magic trackpad. i think it detached from the trackpad body and lost. where can i get this small spare part as i couldn't find this small spare part in apple store?

    Wish I could be more positive but as far as I can see, the solution is to make something for yourself and tape it on.  It appears they do not supply a proper replacement and Ifixit, the usual people say they don't have them.
    Here is a company that supply rubber feet.   It may be worth contacting them and asking if they have something that will do the job.
    http://www.wowshop.co.uk/1%20inch%20rubber%20feet?_tt=g_1455876706_6722138569_56 292842294_c&gclid=COvs0q3pysECFavpwgodMU4APA

  • HT1045 Where can I get the software to be reinstalled?

    I'm looking for the Jam Packs of GB. Where can I download them?

    Do you want to reinstall JamPacks that you previously purchased?
    The JamPacks are no longer available for download, and not all your old installer DVDs will work with Lion, sorry.
    One options to get installers that work with MacOS X Lion is to buy Mainstage 2 from the AppStore. This will install all Jam PAcks in a way, so that the loops and instruments are installed for Logic and GarageBand as well. Mainstage is much lesss expensive than any of the JamPacks used to be.
    Regards
    Léonie

  • Where can I download the software for premiere elements 7

    I lost the CD software for Adobe Premiere Elements 7.  I searched on the Adobe site for the download and can't find it anywhere. I spoke to Customer service and they told me to come here and someone should be able to help me.  Does anyone know where I can download it and install it to my computer.  I still have the case with the serial number just don't have the software

    scoobynewarknj
    I do not see any opportunities for a free source of Premiere Elements 7 installation files.
    There is a web site that offers tryout downloads which you can install and then insert your purchased serial number into the install.
    However, they offer only the installation files for 9.0/9.0.1, 10, 11, 12, and 13.
    There may be very limited chances to purchase Premiere Elements 7 (Amazon may have some listed). You could do a Google Search for
    Premiere Elements 7 purchasing.
    If you purchased the product direct from Adobe, you "should" be able to obtain new installation files. Have you gone to the Adobe
    web site http://www. adobe.com, signed in, and, in the Search field, typed My Orders? Then you would follow My Orders to your orders where
    you should be able to pick out the order involved and download new Premiere Elements 7 installation files from that order. Did you explore that?
    Is it possible that the software can still be found at your location? Perhaps the bottom of a child's toy box?
    Please update us on any break troughs.
    Thank you.
    ATR

  • Where can I download the software that came with my Centro?

    I lost the original CD. 
    Thanks! 
    Post relates to: Centro (Sprint)

    Hi..  Welcome to the Palm forums.  Go to http://www.palm.com/us/support/index.html, under support & downloads select downloads then select your centro and you should see a link for bonus software on your cd. 
    Post relates to: Centro (Sprint)

  • WGA600N - Where can I find the Software

    Can anyone tell me if I can download the software for the WGA600N.  I reset the adapter to add a new WPA password, but I cannnot get it to show the setup wizard.  Does anyone have any idea how I can get to the setup wizard.  Thanks

    Well if you want to download the setup wizard you can download it from this link: http://www.wireless-driver.com/linksys-wga600n-wireless-gaming-adapter-setup-software/ as the setup wizard will not be available on the linksys website to download..
    Here is the link for advanced installation guide for WGA600N Setup Wizard - http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=6503c6b279ad41b29db4da0e7bfe537d_17552.xml&pid=80&...

  • The Site Advisor feature of my McAfee Antivirus software is incompatible with the new version. Will this be resolved soon and if not, where can I download the previous version, since it doesn't appear to be available on the site.

    See question above.

    McAfee have already updated Site Advisor to work with Firefox 4, you can get the latest version (3.3.129) from http://www.siteadvisor.com

  • When you open a mac pdf file in Acrobat 9.5 and add pages where can you see the new file size?

     

    This isn't known until you actually save the file. The size will also depend on how you save.
    File > Save - always bigger, nothing ever deleted
    File > Save as - dead stuff removed
    File > Save as with Fast Web View (may be default) - duplicate backgrouds combined, but extra information added for web view
    So, save it, then use command+D to get info.

  • Where can I find the software for the DMP2 MP3 Player

    Hi guys,
    I have a DMP2 Mp3 Player 2 and I don't have any software for it. Does anybody know where I can find it's Thanks
    Here's the mp3 I have
    http://www.creative.com/products/pro...6&product=4984

    Badaspin,
    The driver are at http://asia.creative.com/support/downloads/
    JasonMessage Edited by Jason-CL on 06-06-2005 02:02 PM

  • I need to re-install acrobat pro 9 - from where can I download the software?

    My original purchase of Acrobat Pro 9 was downloaded online. I have not other copy and I need to reinstall to deal with corrupted files. Currently I am unable to download updates.

    All I can say is that it works for me.
    Perhaps post a comment at the bottom of the prodesigntools.com download page and see if the owner of the website has some suggestions for you
    Download Adobe CS5 Free Trials – All Direct Links without Akamai | ProDesignTools

Maybe you are looking for