Xfi titanium Driver_irql_not_less_or_equal

Now I am getting BSOD at start up. I am getting a DRIVER_IRQL_NOT_LESS_OR_EQUAL nvlddmkm.sys.
I am running windows 7 64bit with 2 nvidia 275gtx. Is there a fix for this or are creative's sound cards just **bleep**?

2thisRe: Xfi titanium Driver_irql_not_less_or_equal? I have the same problem! The Problem is Dolby Digital Li've Real Time Encoding, that when is enabled, the computer crash after 5 max 0 minutes?of work with BSOD related in post above "nvlddmkm.sys"; while if disabled, the problem gone away. Actually use Crati've Fatalty Headset for hear sound because The Creative Inspire 5. Digital 5500 receive 5. signal over optical fiber in Dolby Digital Li've, and now is disabled for avoid the continuous crash with BSOD.
My computer specs:
Motherboard: ASUS M2A-VM
CPU: AMD Athlon x2 4800+
RAM: 4xGB Kingston HyperX DDR2 800MHz 6400 CL4
Video Card: xZotac GTX 275 792MB default clock in Single Mode (no SLI) and nVidia ForceWare Driver v96.2 (latest)
Audio Card: Creative X-FI Titanium Fatalty Champion (with Frontal Bay) with latest driver for Windows 7 (2.7.0007 and Dolby Digital Li've & DTS Connect Pack 3.0.0, all updated with Creative AutoUpdate)
Hard Disk: RAID 2+0 Stripe Configuration with 2x60GB Western Digital
S.O.: Windows 7 Ultimate x64
Solution for this issue?

Similar Messages

GRID doesn't work with xfi titanium pci-express under xp sp3

With my audigy grid worked perfectly but I bought xfi titanium and i donwloaded the last stable driver but grid (+ last patch .2)?crashed at the launch of the game.
If somebody can help me?
my config:
xp sp3, last stable driver, geforce gtx280 (80.48), q6600

up! thanks

Need a little Help with my new xfi titanium

+Need a little Help with my new xfi titanium< A few questions here.
st question? Im using opt out port on the xfi ti. card and using digital li've on a windows 7 64 bit system,? I would like to know why when i use 5. or 7. and i check to make sure each speakear is working the rear speakers wont sound off but the sr and sl will in replace of the rear speakers. I did a test tone on my sony amp and the speaker are wired correctly becasue the rear speakers and the surrond? left and right sound off when they suppose too. Also when i try to click on? the sl and sr in the sound blaster control panel they dont work but if i click on the rear speakers in the control panel the sl and sr sound off. Do anyone know how i can fix this? So i would like to know why my sl and sr act like rears when they are not?
2nd question? How do i control the volume from my keyboard or from windows period when using opt out i was able to do so with my on board? sound max audio using spidf? Now i can only control the audio using the sony receiver.
Thank you for any help..

/Re: Need a little Help with my new xfi titanium? ?
ZDragon wrote:
I'm unsure about the first question. Do you even have a 7. system and receiver? If you just have 5., you should be able to remap the audio in the THX console.
I do have a sony 7. reciever str de-995 its an older one but its only for my cpu. At first i didnt even have THX installed because it didnt come with the driver package for some reason until i downloaded the daniel_k support drivers and installed it. But it doesnt help in anyway.
I have checked every where regarding the first question and alot of people are having problems getting sound out of there rear channels and the sound being re-mapped to the surround right and the surround left as if there rear left and rear right.
I read somewhere that the daniel_k support drivers would fix this but it didnt for me and many others.
For the second question i assumed it would be becasue of the spidf pass through and that my onboard sound card was inferior to the xfi titaniums. But i wasnt sure and i was hopeing that someone would have a solution for that problem because i miss controlling the volume with my keyboard.

XFI Titanium no micro work

? Hey there,
I've got the new XFI Titanium and the latest driver installed.
My Speedlink Medusa 5. Pro works fine but the micro not.(I tried also a Sehnheiser PC 5 same Problem)
I reinstalled the Driver a few times.
I tried all PCI Express Slots on my Motherboard (ASUS P5WDH-DELUXE).
In my Drivermenu in All Modes (Game/Entertain etc...) is a menu missing.
The Connections Submenu isn't there so i cant configure the FlexiJack to use Microphone.
I tried so many things but i dont get it to work.
Here some Screenshots:
<img border="0" height="45" width="596" src="http://www.abload.de/img/gamecon5334.jpg">
<img border="0" height="473" width="60" src="http://www.abload.de/img/gameconmissingmenute48.jpg">
I know that my headsets microphone work perfect with my previous soundcard (Xtreme Music) so it isn't broken.
I dont know what elso to do now.

I tried using Windows Vista x86 Ultimate SP.
There is the menu for flexijack but the microphone still wont work.
And the Card recognized when the mic is plugged in and when not.
It must be a driver problem.
Please Creative read this and fix it so i can use my Speedlink Medusa 5. Pro.

Issue activating DDL on XFi titanium Fatal1ty Champions

Hello there,
I've just bought a brand new XFi titanium Fatalty Championship.
Everything went fine?during the installation,
I was happy to download the latests patches from the 23rd of october right after the installation,
I successfully activated my DDL licence over the web ...
but?there is no? "Encoder" tab on configuration panel,
and of course no Dolby Digital or DTS options are available in the consoles.
I tried to uninstall everything, then I reinstalled everything, same issue.
When I run the DDL?licence?activation program,?I have a marvellous?blue?window saying ?that my activation is ok, but there is no impact in my console or configuration panel.
Did someone face the same issue ?May be I missed something important ?
Thanks for your help?!
My configuration is :
Windows Vista 32, Service Pack installed
Intel Dual Core 6600

Hi there, thanks for your answer, but sadly, Dolby Digital option do not appear in audio console entertainement mode. This is my problem actually. If I understand well, this option only appear if you have activated the Dolby Digital License, and my problem is : all the things which should appear when DDL is activated are not displayed. I triple checked my DDL activation : it's ok on this side. Hope my problem is more clear now -- sorry for my porr english, it's not my nati've langage -- Regards

XFI Titanium high dpc latency after installing creative console launcher

HXFI Titanium high dpc latency after installing creative console launcher=im using windows 7 64 bit sp(rtm) this also happens with normal windows 7 64 bit(without sp).
when only installing the driver for the XFI titanium my dpc latency is between 0-50 with spikes that go to 90.
this also happens when I don't have any drivers installed.(windows high definition default driver)
however when I install the creative console launcher my dpc latency is allways above 00 and most of the time between 00-200 with spikes to +-400.
im using PAX PCIe Titanium ALL OS Driver V3.25, and creative console launcher 2.6.49 beta.
my question is can I use game mode without installing the console launcher?
is there a version of the console launcher that doesn't cause higher dpc latency?

Maybe a bad driver mod. Try Creative own drivers/CD first and see what happens.

SoundBlaster XFi Titanium Fatal1ty Popping Sounds

Okay...obviously this isn't a new problem... I've seen tons of complaints about it. Anyhow, I've started getting popping sounds randomly, through analog and digital. Is there ANY fix for this? I was thinking it might be my wireless card (which is three slots down from the sound card, and has an external?antennae. Any ideas? I never got this on my XtremeMusic. I have:
Intel Core 2 Duo e8400
Geforce GTX 285
DFI Lanparty DK P35
Wireless N PCI Adaptor
Xfi Titanium Fatalty PCIe
3 Hard dri've/bluray dri've, yadayada yada...
Latest Creative driver
Windows 7 64
4GB DDR2 RAM

Try swapping PCI slots of your Wireless card. If your sound card is PCIX you can only move it to a x, x4 x8 or x6 slot. The wireless card can be moved to any other PCI slot.

XFI Titanium champion.Dolby live dts windows 7 64 hang/fix

:Hi,i have an xfi titanium fatility champion card installed on my pc.My os is windows 7 64bit.Now i no this problem has been about for awhile,but can please someone supply me with the fix that stops the pc from hanging at shutdown and restart when dolby li've or dts is enabled,thanks Adyj7

>Thanks for the answerThis is where it gets tricky.when i try a new install of windows and use the installation cd that i received with my card i find this enables me to use dolby li've and dts with no problems,but the auto update causes me several problems-when i try and update and install drivers and applications--st one is file layout bin--which i have followed the correct instructions for from creative--2nd...is setup.skn from cd----which i have also tried to sort out.After this the cd tells me to contact creative support? because i receive an error 00. I have even tried a fresh install of windows and then downloaded all the latest software from the creative site,installed everything with no problem,buut i find i can only use dolby li've and dts for a short while before it tells me to reinstall the application again!!!which i have tried several times!!!The only way i can get? dolby li've and dts to work correctly is by installling from the cd.Can anyone please advise me on what to do next,Thankyou and kind regards Adyj7

Best driver for XFI Titanium

Hello I am new here and confused with all these driver options and differences with sound between Windows XP and Windows 7 as I've heard that from Vista Microsoft took away proper hardware support from these cards.
Please kindly can someone provide me the best driver for use for Creative XFI-Titanium PCIe sound card?
I need it to perform surround sound in headphones via CMSS-3D I think it is called.
Thank you very much.

`Thanks for replies.
So I have installed the?
SB X-Fi Titanium PCI-E Install Disc .0
from http://forums.creative.com/t5/Sound-Blaster/SB-X-Fi-Titanium-PCI-E-Install-Disc--0-unofficial/td-p/556425
I am not sure what the difference between the support pack and this is to be honest. So I just installed this one as it comes with more updated software.
edit:
Sorry I forgot to mention that in device manager under sound controllers it lists
Creative SB X-Fi
Does this mean that my system is not properly recognised or doesn't it display the specifics such as Creative X-Fi Titanium for example? Thanks...

PAX PCIe XFI Titanium HD Vista_7 Driver V1.00

PAX PCIe XFI Titanium HD Vista_7 Driver V.00
Creative all rights be long to Creative and logos. Creative giving me there writing persimmon by Robert McClelland.
PAX related logos and software and drivers are own by PAX
- Please don't remod my work with out permission you can contact me at Hardwareheaven.com
Celebrating
5 years of PAX drivers.
32/64Bit - Read me
PAX
Performance Audio Xeleration
Tweaked Drivers for Creative Soundcards:
Better Performance. Better Audio. Better Xeleration.
Tweaked Edition
Supported cards:
Sound Blaster X-Fi Titanium HD
Supported OS:
32 and 64Bit
Based on:
XFRL_PCDRVBETA_US_3_00_0037
+ Updated tweak settings 2/7/0
+ Added support for default 5. speaker
You can change speaker setting near taskbar by the clock. Go to playback to Config
Important :
Before installing, remove all traces of any previous x-fi drivers and all x-fi driver by removing the driver within "Device Manager". To clean up any excess files left on your system, you should use a 3rd party program to do this job (unless you've a good understanding of the registry) A recommended program to do this is Driver Sweeper - which is freeware, and available from http://www.guru3d.com/category/driversweeper/ or paid version at hardwareheaven.com driver cleaner.net
To install the software driver :
Providing you've followed the steps above, restart your computer and run Setup.exe. Follow through the prompts until the installation has completed.
Please used register cleaner like tune up Advanced SystemCare iobit.com or crapcleaner
What is Pax?
Formally known as Youpax, Pax was founded by Robert McClelland 5 years ago, who is continuing to provide an alternati've tweaked driver to the Official driver released by Creative.
Why should I install this Pax alternati've?
Pax is aimed at improving sound quality and to give a more deeper bass sound, while retaining the clarity of the overall output audio. Most users continue to use Pax drivers once moving over and never look back!
For support, feedback and latest driver updates, please visit : http://www.hardwareheaven.com/pax-drivers/
http://www.technewshw.com/forum/index.php
http://forums.guru3d.com/
PAX 2005-200
Happy Holidays everyone.
http://dl.technewshw.com/drivers/PAX...ta_7%20V.00.7z

Caliostro wrote:
So basically your whole tweak is a "more bass / less treble" adjustment on driver level and thats it's
Where ist the difference to changes in the standard? EQ-Settings?
Oh i forgot to mention your collection of updated software (alchemy etc.) in your big releases.
Thats a nice service, but nothing a user couldnt do on its own.
Maybe you would like to use you inf-knowlege to hunt down those bugs.
Sorry for my crappy english.
Np your english is fine. Ya I also tweak other stuff in the inf. You can change setting on your own but you have uninstalled reinstalled each time. There also vocie vocal tweak and mid range tweaks make sound improve in speach and other stuff give the set a try.

Question Regarding Inspire t 6200 and PCIE XFI Titanium Fatality Pro series.

LQuestion Regarding Inspire t 6200 and PCIE XFI Titanium Fatality Pro series.0 Hello All,
I need help on this.
I have PCIE X-FI Titanium Fatality Pro Series. and I just bought 5. Speakers Inspire t 6200.
However, I have some problems.
. In Mass Effect or Other game Or dvd I cant make the center work. It means you can hear the music and background sound clearly but no Voice at all that ussualy come from center channel.
2I Tested over audio controler from the disk. When I put 5. speaker configuration, the sound is coming from center and left channel for left channel and same thing for the other side. However, When the test is trying to test the center and rear speake, the sound are muffled.
3. Is X FI only for Headset only or you can use Pc Speaker ? And how to configuration for Inspire t6200 with my sound card.
Thank You

AnyOne?

Sound Stutters During Windows 7 Startup/Login XFi Titanium Fatality Pro

During Windows 7 startup/login I get a weird stuttering sound when the startup sound effect plays. I have installed my X-Fi Titanium Fatality Pro card on two different PC's and get the same result. It's not a big issue but it does get annoying because it stutters throughout the whole startup/login sound effect. Has anyone else experienced this issue or resolved it's Thank you.

KYep, im having the same. Windows 7 Professional + XFI Xtreme Music Sound distortion and lag when watching youtube clips or actions as simple as changing theme in windows 7 desktop ( it goes on with wierd distorted sound) Any help? i have tryed last 2 creative audio drivers with no help..

XFI Titanium HD - What cable or connection to use for best quality sound?

I plan on buying the xfi HD today, which will replace my champion series. I saw that it does not offer many outputs like the champion series, and would like to know which give the best qualioty optical cable or rca cables. O have the Z5500 system btw. I want to buy the proper cables when i go pick this up later today. Thanks!

DO not buy the titanium HD unless you are not going to use it for 5. surround. Yes indeed it does have optical out. which will give you 5. surround. but when using optical you are by passing the cards internal DACS and using the DACS in the logitech control pod which are no where near quality of the sound card.
if you want the best sound i advice you to use analog which the titanium HD does not have. there is no word weather or not there going to make a addon board for this. i asked numerous times. now if you dont mind using logitech to control sound. but you would be essentionally wasting almost 200 dollars.
alot of companies do not tell you this.when using optical connections you are BYPASSING the sound cards compon that make it good. analog is the way to go!
unless your using a external receiver with excellent dacs inside

Xfi titanium hd. This device cannot start. (code 10)

I bought the titanium hd in october andf have been hapily using it until last week.
I was playing a game and it crashed to desktop?and there was a pop up error about driver didnt install successfully, the driver was already installed when i installed the card the first day.
Then i noticed i had no sound so i cleared the drivers and reinstalled from disk, but still had no sound, i went to device manager and it had excalmation and error.
?This device cannot start. (code 10)
At this point i cleared drivers and tried different pcie slots but still the same, as a last resort i tried a complete fresh install of windows 7, installed card got same windows error about install, i then installed the drivers from disk and it still is unfixed no sound and, This device cannot start. (code 10) error.
System specs
i7 920
evga 4way classified x58
dominator ram
2 evga gtx 580s
500w psu
win 7 64bit.
I really hope someone can help so i dont have the hasle of rma.
Thanks

Ok update last night instead of clear cmos i removed bios battery to see if that could help, it didnt, so i then installed vista 64 just to check it, and i get same error.
So back on win7 i installed drivers as before and it lets me from disk but when it comes to driver update it says no craeti've products detected or something very simlar. i get same erro if i try and install the beta driver.
Squall thanks for the suggestion but that also didnt help, i do remember though i had been benhmarking the afternoon it died?and had increased my ioh voltage to .25v which isnt much.
I thought at first id damaged one of my pcie slots but i checked my gpus in all 7 pcie slots and they work fine.
Looking at the net i see that there are lots of other people running into this error and not just with sound card but usb devices and such, so it gives me hope that the cards not bad.
Any more suuggestions would be good,
Other things i've tried is remove the device from device manager and retry, along with uninstall device.
Thanks

Need help on Inspire t 6200 and PCIE XFI titanium Fatality pro series

Hello All,
I need help on this.
I have PCIE X-FI Titanium Fatality Pro Series. and I just bought 5. Speakers Inspire t 6200.
However, I have some problems.
1. In Mass Effect or Other game Or dvd I cant make the center work. It means you can hear the music and background sound clearly but no Voice at all that ussualy come from center channel.
2I Tested over audio controler from the disk. When I put 5. speaker configuration, the sound is coming from center and left channel for left channel and same thing for the other side. However, When the test is trying to test the center and rear speake, the sound are muffled.
3. Is X FI only for Headset only or you can use Pc Speaker ? And how to configuration for Inspire t6200 with my sound card.
I am using Windows xp sp 3
4g Ram
Pentium dual core Extreme?
Thank You

AnyOne?

Xfi titanium Driver_irql_not_less_or_equal

Similar Messages

Maybe you are looking for