Xfinity TV not working on computer

had to have major clean-up done on computer yesterday and now, I cannot get TV shows to play on my computer.  Any ideas? 

Not enough info for anybody to try to help you.What clean up? What computer? What OS? Does anything else play?

Similar Messages

  • SB04100 Sound Blaster Card not working after computer rebuild

    =SB0400 Sound Blaster Card not working after computer rebuildZ I did a full disk format and reinstall for a friend on a Dimension 3000, running XP SP3. There is no sound at all. Speakers are good, tested on another system. Model number on the back of the sound card is SB0400, so I assume this is an older 24 bit PCI SoundBlaster card. Although I reinstalled all drivers from Dell, I found no drivers for this. The Creative site has no listing for this model.
    Computer does not seem to recognize the card. Have not opened the box yet but I assume if I were to remove and then reinstall the card it would be recognized (?) I then have to find an SB0400 driver.
    Does anyone know where I can find an SB0400 driver ? Does the strategy of pulling and reinstalling the card make sense ? (I have really avoided tampering with any of the hardware on this box -- since it is not mine.)

    Re: SB0400 Sound Blaster Card not working after computer rebuild? Thanks much for your response. Problem solved for now. I removed the board and then reinserted it, after which I was able to download the drivers directly. Some of my difficulty with this whole process has been ) I didn't know there was no working speaker in the computer and 2) I apparently misunderstood the BIOS settings for this. I re-set it up as an add-on board during the troubleshooting process. After loading the driver, I went back to the original setting (don't recall what it was but it was for integrated sound). The setting for integrated sound works fine, with external speakers and the new 24 bit driver. Still some noise (popping and static) but this board shares the bus with 2 other cards one of which is a wireless network card. May be a PCI latency issue but I'm reluctant to change that because the network card is a bit shaky anyway.
    Everything works for now -- I'll be glad to get this particular computer out of my house !

  • Thunderbolt ethernet not working when computer wake up from sleep.

    thunderbolt ethernet not working when computer wake up from sleep.
    it will not happen in Mountain loin.

    I had this problem on SL and on Lion as well, and it occures for WiFi and Ethernet connections.
    In fact the internet connection was not broken as I could ping the destination usin the IP (not DNS name).
    In this case the problem was related to mDNSResponder task which handles all dns queries.
    It was the most frequent problem in my day to day work with SL and now Lion. It was never fixed by any patch from Apple. I tried almost all voodoo including fresh install, all possible config changes - no solution.
    The only version with no problems related to network was 10.5.8. All the other versions had issues of different kind (WiFi instability (lost signal), DNS problems (for wireless and wired connection) sometimes associated with machine sleep and wake up and sometimes with no reason.
    QUESTION: Is your problem independent of the access point / router you connect to.
    I must say networking was (and still is) the weakest part, besides the other OS X weaknesses I experienced during 4 years of OS X usage.
    No problems in the same network with Linux or Windows beeing ran natively on my iMac So hardware is OK.
    Software is of poor quality. Not much more to say in this matter.
    I found a very interesting article dated 1996 about programming which I think is still valid.
    Link to the article: http://www.fastcompany.com/magazine/06/writestuff.html
    Below the fragment (with some connection to Apple)
    Software is everything. It also s***s.
    "It's like pre-Sumerian civilization," says Brad Cox, who wrote the software for Steve Jobs NeXT computer and is a professor at George Mason University. "The way we build software is in the hunter-gatherer stage."

  • The keyboard for my iMac 9, 1 got wet and is not working correctlly. Delete,return, and some other keys not functioning. In all caps including numerals. I've left it to dry for a few days but still will not work. Computer now in Safe boot mode and I c

    The keyboard for my iMac 9, got wet and is not working correctly. Delete ,return, and some other keys not functioning. In all caps including numerals. I've left it to dry for a few days but still will not work. Computer now in Safe boot mode and I can't login due to all caps and numbers being symbols. Is there anything I can do?

    Buy a replacement keyboard. They're only $50-65 USD.
    27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

  • Not working properly Computer Browser service in Windows Server 2012

    Good afternoon.
    Migrated from 2003 to 2012 Active Directory, all is good, but the service Computer Browser in Windows Server 2012 is not working properly.
    Online, there are several hundred computers, one network, no segments. PDC is the Master Browser, it is in my list of all the computers, but gives customers or Backup Browser computers only part, and in alphabetical order, giving the first 70 computers and
    all.
    Looked packet sniffer:
    Microsoft Windows Lanman Remote API Protocol 
    Entry Count: 70 
    Available Entries: 251
    So on Master Browser shows 251 computer, and the client 70.
    If disabled on Windows Server 2012 Service Computer Browser, Master Browser is a computer running Windows Server 2003. He gives all computers.
    What is the problem, how to get Windows Server 2012 to work correctly as a Master Browser?

    More info. I have high lighted in bold where the issue is. This is a massive headache for me at the moment
      Frame: Number = 377, Captured Frame Length = 182, MediaType = ETHERNET
    - Ethernet: Etype = Internet IP (IPv4),DestinationAddress:[00-13-72-52-6E-A1],SourceAddress:[00-1E-0B-2B-68-DD]
      - DestinationAddress: Dell Inc. 526EA1 [00-13-72-52-6E-A1]
         Rsv: (000000..)
         UL:  (......0.) Universally Administered Address
         IG:  (.......0) Individual address (unicast)
      - SourceAddress: 001E0B 2B68DD [00-1E-0B-2B-68-DD]
         Rsv: (000000..)
         UL:  (......0.) Universally Administered Address
         IG:  (.......0) Individual address (unicast)
        EthernetType: Internet IP (IPv4), 2048(0x800)
    - Ipv4: Src = 10.44.46.101, Dest = 10.44.44.14, Next Protocol = TCP, Packet ID = 14025, Total IP Length = 168
      - Versions: IPv4, Internet Protocol; Header Length = 20
         Version:      (0100....) IPv4, Internet Protocol
         HeaderLength: (....0101) 20 bytes (0x5)
      - DifferentiatedServicesField: DSCP: 0, ECN: 0
         DSCP: (000000..) Differentiated services codepoint 0
         ECT:  (......0.) ECN-Capable Transport not set
         CE:   (.......0) ECN-CE not set
        TotalLength: 168 (0xA8)
        Identification: 14025 (0x36C9)
      - FragmentFlags: 16384 (0x4000)
         Reserved: (0...............)
         DF:       (.1..............) Do not fragment
         MF:       (..0.............) This is the last fragment
         Offset:   (...0000000000000) 0
        TimeToLive: 128 (0x80)
        NextProtocol: TCP, 6(0x6)
        Checksum: 0 (0x0)
        SourceAddress: 10.44.46.101
        DestinationAddress: 10.44.44.14
    - Tcp: Flags=...AP..., SrcPort=65372, DstPort=NETBIOS Session Service(139), PayloadLen=128, Seq=1910965363 - 1910965491, Ack=580319796, Win=252 (scale factor 0x8) = 64512
        SrcPort: 65372
        DstPort: NETBIOS Session Service(139)
        SequenceNumber: 1910965363 (0x71E70473)
        AcknowledgementNumber: 580319796 (0x2296FA34)
      - DataOffset: 80 (0x50)
         DataOffset: (0101....) 20 bytes
         Reserved:   (....000.)
         NS:         (.......0) Nonce Sum not significant
      - Flags: ...AP...
         CWR:    (0.......) CWR not significant
         ECE:    (.0......) ECN-Echo not significant
         Urgent: (..0.....) Not Urgent Data
         Ack:    (...1....) Acknowledgement field significant
         Push:   (....1...) Push Function
         Reset:  (.....0..) No Reset
         Syn:    (......0.) Not Synchronize sequence numbers
         Fin:    (.......0) Not End of data
        Window: 252 (scale factor 0x8) = 64512
        Checksum: 0x6F65, Disregarded
        UrgentPointer: 0 (0x0)
        TCPPayload: SourcePort = 65372, DestinationPort = 139
    - Nbtss: SESSION MESSAGE, Length =124
        PacketType: SESSION MESSAGE, 0(0x00)
      - Flags: Add 0 to Length
         Reserved: (0000000.)
         Extension: (.......0)Add 0 to Length
        Length: 124(0x7C)
    - SMB: C; Transaction, Remote Administration Protocol, FileName = \PIPE\LANMAN
        Protocol: SMB
        Command: Transaction 37(0x25)
      - NTStatus: 0x0, Facility = FACILITY_SYSTEM, Severity = STATUS_SEVERITY_SUCCESS, Code = (0) STATUS_SUCCESS
         Code:     (................0000000000000000) (0) STATUS_SUCCESS
         Facility: (...0000000000000................) FACILITY_SYSTEM
         Customer: (..0.............................) NOT Customer Defined
         Severity: (00..............................) STATUS_SEVERITY_SUCCESS
      - SMBHeader: Command, TID: 0x2001, PID: 0x276C, UID: 0x3801, MID: 0x0140
       - Flags: 24 (0x18)
          LockAndRead:     (.......0) LOCK_AND_READ and WRITE_AND_UNLOCK NOT supported (Obsolete) (SMB_FLAGS_LOCK_AND_READ_OK)
          NoAck:           (......0.) An ACK response is needed (SMB_FLAGS_SEND_NO_ACK[only applicable when SMB transport is NetBIOS over IPX])
          Reserved_bit2:   (.....0..) Reserved (Must Be Zero)
          CaseInsensitive: (....1...) SMB paths are case-insensitive (SMB_FLAGS_CASE_INSENSITIVE)
          Canonicalized:   (...1....) Canonicalized File and pathnames (Obsolete) (SMB_FLAGS_CANONICALIZED_PATHS)
          Oplock:          (..0.....) Oplocks NOT supported for OPEN, CREATE & CREATE_NEW (Obsolete) (SMB_FLAGS_OPLOCK)
          OplockNotify:    (.0......) Notifications NOT supported for OPEN, CREATE & CREATE_NEW (Obsolete) (SMB_FLAGS_OPLOCK_NOTIFY_ANY)
          FromServer:      (0.......) Command - SMB is being sent from the client (SMB_FLAGS_SERVER_TO_REDIR)
       - Flags2: 51207 (0xC807)
          KnowsLongFiles:            (...............1) Understands Long File Names (SMB_FLAGS2_KNOWS_LONG_NAMES)
          KnowsEas:                  (..............1.) Understands extended attributes (SMB_FLAGS2_KNOWS_EAS)
          SmbSecuritySignature:      (.............1..) Security signatures enabled (SMB_FLAGS2_SMB_SECURITY_SIGNATURE)
          Compressed:                (............0...) Compression Disabled for REQ_NT_WRITE_ANDX and RESP_READ_ANDX (SMB_FLAGS2_COMPRESSED)
          SecuritySignatureRequired: (...........0....) Security Signatures are NOT required (SMB_FLAGS2_SMB_SECURITY_SIGNATURE_REQUIRED)
          Reserved_bit5:             (..........0.....) Reserved (Must Be Zero)
          IsLongName:                (.........0......) DO NOT use Long File Names (SMB_FLAGS2_IS_LONG_NAME)
          Reserved_bits7_9:          (......000.......) Reserved (Must Be Zero)
          ReparsePath:               (.....0..........) NOT a Reparse path (SMB_FLAGS2_REPARSE_PATH)
          ExtendedSecurity:          (....1...........) Aware of extended security (SMB_FLAGS2_EXTENDED_SECURITY)
          Dfs:                       (...0............) NO DFS namespace (SMB_FLAGS2_DFS)
          Paging:                    (..0.............) Read operation will NOT be permitted unless user has permission (NO Paging IO) (SMB_FLAGS2_PAGING_IO)
          NTStatus:                  (.1..............) Using 32-bit NT status error codes (SMB_FLAGS2_NT_STATUS)
          Unicode:                   (1...............) Using UNICODE strings (SMB_FLAGS2_UNICODE)
         PIDHigh: 0 (0x0)
         SecuritySignature: 0x0
         Unused: 0 (0x0)
         TreeID: 8193 (0x2001)
         ProcessID: 10092 (0x276C)
         UserID: 14337 (0x3801)
         MultiplexID: 320 (0x140)
      - CTransaction:
         WordCount: 14 (0xE)
         TotalParameterCount: 32 (0x20)
         TotalDataCount: 0 (0x0)
         MaxParameterCount: 8 (0x8)
         MaxDataCount: 4200 (0x1068)
         MaxSetupCount: 0 (0x0)
         Reserved: 0 (0x0)
       - Flags: Do NOT disconnect TID
          Disconnect: (...............0) Do NOT disconnect TID
          NoResponse: (..............0.) Server response to the client
          Reserved:   (00000000000000..) Reserved
         Timeout: 5000 milli sec(s)
         Reserved2: 0 (0x0)
         ParameterCount: 32 (0x20)
         ParameterOffset: 92 (0x5C)
         DataCount: 0 (0x0)
         DataOffset: 0 (0x0)
         SetupCount: 0 (0x0)
         Reserved3: 0 (0x0)
         ByteCount: 61 (0x3D)
       - RemoteAPIBuffer:
        - FileName: \PIPE\LANMAN
         - Align: 1 Bytes
            AlignBytes: Binary Large Object (1 Bytes)
           Name: \PIPE\LANMAN
          Pad1: Binary Large Object (2 Bytes)
    - RAPRequest: NetServerEnum2 Request, InfoLevel = 1, SV_TYPE_ALL: All in NSNET
        RAPOpcode: NetServerEnum2
      - ParameterDescriptor: WrLehDz; 4 send, 1 receive parameter
         Param: (W) WORD (send parameter, 16 bit integer)
         Param: (r) Receive buffer (format in data descriptor) (receive data, 0 bit integer)
         Param: (L) Receive buffer length (send/receive parameter, 16/16 bit integer)
         Param: (e) Entries read (receive data, 0 bit integer)
         Param: (h) WORD (receive parameter, 16 bit integer)
         Param: (D) DWORD (send parameter, 32 bit integer)
         Param: (z) ASCIIZ (send parameter, 8 bit integer)
         Param: ASCII NUL (string terminator)
      - DataDescriptor: B16BBDz; data bytes send: 0, receive: 34
       - Datum: (B) BYTE[16] (receive data, 8 bit integer)
          Datum: (B) BYTE (receive data, 8 bit integer)
          Digit: 1
          Digit: 6
         Datum: (B) BYTE (receive data, 8 bit integer)
         Datum: (B) BYTE (receive data, 8 bit integer)
         Datum: (D) DWORD (receive data, 32 bit integer)
         Datum: (z) ASCIIZ* (receive data offset, 32 bit integer)
         Datum: ASCII NUL (string terminator)
      - NetServerEnum2: SV_TYPE_ALL: All in NSNET
         InfoLevel: (1) SERVER_INFO_1
         ReceiveBufferSize: 4200 (0x1068)
       - ServerType: SV_TYPE_ALL: All
          Workstation:      (...............................1) All workstations
          Server:           (..............................1.) All computers with the server service running
          Sqlserver:        (.............................1..) All running Microsoft SQL Server
          DomainCtrl:       (............................1...) All primary domain controllers
          DomainBakctrl:    (...........................1....) All backup domain controllers
          TimeSource:       (..........................1.....) All Time servers
          AFP:              (.........................1......) All Apple File Protocol servers
          Novell:           (........................1.......) All Novell servers
          DomainMember:     (.......................1........) All LAN Manager 2.x domain members
          PrintqServer:     (......................1.........) All print servers
          DialinServer:     (.....................1..........) All dial-in servers
          ServerUnix:       (....................1...........) All Unix/Xenix servers
          NT:               (...................1............) All Windows NT workstations or servers
          WFW:              (..................1.............) All Windows for Workgroups servers
          ServerMFPN:       (.................1..............) All Microsoft File and Print for NetWare servers
          ServerNT:         (................1...............) All non-domain controller servers
          PotentialBrowser: (...............1................) All servers that can run the browser service
          BackupBrowser:    (..............1.................) All backup browsers
          MasterBrowser:    (.............1..................) All master browsers
          DomainMaster:     (............1...................)  All domain master browsers
          Reserved1:        (..........11....................)
          Windows:          (.........1......................) All Windows 95 or later
          DFS:              (........1.......................) All DFS root servers
          ClusterNT:        (.......1........................) All NT Clusters
          Terminalserver:   (......1.........................) All Terminal Servers
          ClusterVSNT:      (.....1..........................) All NT Cluster Virtual Server Names
          DCE:              (....1...........................) AllIBM DSS (Directory & Security Services)
          Reserved2:        (...1............................)
          AlternateXport:   (..1.............................) Return list for alternate transport
          LocalListOnly:    (.1..............................) Return local list only
          DomainEnum:       (1...............................) Enumerate primary domain
         Domain: NSNET
    Then the reply;
        Frame: Number = 378, Captured Frame Length = 1514, MediaType = ETHERNET
    + Ethernet: Etype = Internet IP (IPv4),DestinationAddress:[00-1E-0B-2B-68-DD],SourceAddress:[00-13-72-52-6E-A1]
    + Ipv4: Src = 10.44.44.14, Dest = 10.44.46.101, Next Protocol = TCP, Packet ID = 27036, Total IP Length = 1500
    + Tcp: Flags=...A...., SrcPort=NETBIOS Session Service(139), DstPort=65372, PayloadLen=1460, Seq=580319796 - 580321256, Ack=1910965491, Win=253 (scale factor 0x8) = 64768
    + Nbtss: SESSION MESSAGE, Length =2013
    + SMB: R; Transaction, Remote Administration Protocol
    - RAPResponse: NetServerEnum2 Response, Count = 31
        Win32ErrorCode: 0x00000000 - ERROR_SUCCESS - The operation completed successfully.
        Converter: 2251 (0x8CB)
      - NetServerEnum2: Count = 31
         EntriesReturned: 31 (0x1F)
         EntriesAvailable: 31 (0x1F)
       + NetServerInfo1: APOLLO
       + NetServerInfo1: ARTEMIS
       + NetServerInfo1: ASKLEPIOS
       + NetServerInfo1: CASTOR
       + NetServerInfo1: DCC4503-131L
       + NetServerInfo1: DCC4503-155L
       + NetServerInfo1: DCC4503-157L
       + NetServerInfo1: DCC4503-161L
       + NetServerInfo1: DCC4503-171L
       + NetServerInfo1: DCC4503-172L
       + NetServerInfo1: DCC4503-175L
       + NetServerInfo1: DCC4503-177L
       + NetServerInfo1: DCC4503-183L
       + NetServerInfo1: DCC4503-184L
       + NetServerInfo1: DCC4503-185L
       + NetServerInfo1: DCC4503-188L
       + NetServerInfo1: DCC4503-196L
       + NetServerInfo1: DCC4503-197L
       + NetServerInfo1: DCC4503-199L
       + NetServerInfo1: DCC4503-202L
       + NetServerInfo1: DCC4503-203L
       + NetServerInfo1: DCC4503-205L
       + NetServerInfo1: DCC4503-210L
       + NetServerInfo1: DCC4503-213L
       + NetServerInfo1: DCC4503-219L
       + NetServerInfo1: DCC4503-220L
       + NetServerInfo1: DCC4503-228L
       + NetServerInfo1: DCC4503-233L
       + NetServerInfo1: DCC4503-234L
       + NetServerInfo1: DCC4503-236L
       + NetServerInfo1: DCC4503-241L
        StringData: Binary Large Object (586 Bytes)

  • Camera not working with computer "HELP"

    my camera used to work with computer but when i took it off and went to hook it back up nothing seams to work now it says camera not hooked up on all my app's what can i do to make it work or check if my system is working the way it should ???? how can i get it to work again ?????
    PLEASE HELP ME PLEASE

    I am sorry about that last post...I am not even going to bother explaining what happened there..:)
    Anyway, you may want to start here:
    iMovie: Cannot see or control camera
    http://docs.info.apple.com/article.html?artnum=43000
    There are lots of links within the article-don't miss anything!
    Sue

  • Itunes wifi sync not working. recognising computer, but it's not 'available'

    It knows what computer to use, but whether it's on power, or not, it doesn't sync over wifi.
    My machine is a windows XP box.
    A port to open in the firewall, maybe?
    thanks,
    Superd@ve

    I have an issue very similar to this as well. Wireless syncing does NOT work ever since I switch to FiOS.

  • Mail not working on computer

    After I set up my iPhone and synced for the first time, I am able to received my POP email on my phone, but no longer on my computer's Mail.
    I checked all the preferences for the account on my computer and everything seemed fine. I have tried deleting the account and re-entering it. It still does not work.
    I have check the preferences on the iPhone and it does not say to delete messages on server until it is taken from the inbox. Same with preferences on my computer's Mail.
    Anyone have any suggestions?

    I have the same problem. Love to find the solution before I call Comcast or Apple tech support.

  • ITunes radio not working on computer and iPad mini

    Radio on iPad skips very fast through songs on all stations
    same on the phone
    doesn't work at all on computer
    stable internet connection on both devices

    I would try and hold the power and home button down at the same time for 15 seconds or until device shuts off, then see if it works. If that does not work try resetting your device. If you do not want to reset it, contact Apple support.   make sure to back up everything on device!

  • Bigpond Movie Plug-in not working on computer/ Chrome browser

    Hello, I have just joined Bigpond Movies and installed a T-Box...so far all good. Rented my first movie last night. However, I was forced to leave the movie early, while leaving the movie running for rest of family. I wanted to catch up on the parts I missed last night by watching on my computer...of course !! The problem(s):1) No movie appeared in my rental tab of Bigpond Movies when I logged in via computer. However, movie was recorded as being rented in the billing tab and I was still within my 48 hours to watch and catch up.Is this normal? Has anyone else had this problem 2) Frustrated, I wanted to rent another movie>I was informed that to rent and watch I needed to download a Bigpond Movie Plug-in. I am using Chrome.I clicked download and the .exe program called widevine media optimizer was run. When I clicked Run, it failed to install 3 times.....I looked in crowdsupport and someone said download plug in directly from widevine website. I did and it installed successfully BUT I still get the Bigpond message to install the Bigpond Movie Plug-in. I restarted browser, I restarted computer and it still does not work. Does anyone have any suggestions from Telstra / Crowdsupport? Thanks

    Jeff, Thank you for your reply. However, I still have the same problem. Widevine plugin does not seem to be recognised by Chrome nor Bigpond Movies.  It loaded as mentioned when I went to the widevine website and chose the correct plugin ie for Chrome. The program is in my MS control panel so I know it loaded correctly.  However, I still get the Bigpond Movie dialogue box to download the plugin ?? And I am not using a different browser. Today, I have attempted to do the same on my laptop and I have exactly the same symptoms ie first it fails to load when I am prompted by Bigpond Movie dialogue box. I go to the widevine website and download the plugin and it installs correctly. However, when I attempt to rent a movie I get the same Bigpond Movie dialogue box wanting me to download the plugin. So for now I am still stuck on both computers and not able to rent a movie I begin to suspect another plugin called silverlight from MS which was installed a few days ago when I attemtped to watch movies on computer from Netflix. Once downloaded, I was able to watch Netflix. Research under way.  It seems that this is not a unique problem but the answers are not clear. Best regards 

  • Internet connection not working after computer wakes up from sleep. OSX Lion

    After upgrading to Lion, I noticed that my internet connection doesn't work when I wake my computer from sleep. I have to turn off the WiFi connection, turn it back on and it will work. I guess this is a glitch that will be fixed later on. Just wanted to point it out. I don't know if someone else is having the same problem? I am not very happy with the upgrade to Lion, things seem to be slower, I've had several freezes requiring to reboot. I guess Lion needed a little more twicking before release. Not worth the $29.99 price tag.

    I had this problem on SL and on Lion as well, and it occures for WiFi and Ethernet connections.
    In fact the internet connection was not broken as I could ping the destination usin the IP (not DNS name).
    In this case the problem was related to mDNSResponder task which handles all dns queries.
    It was the most frequent problem in my day to day work with SL and now Lion. It was never fixed by any patch from Apple. I tried almost all voodoo including fresh install, all possible config changes - no solution.
    The only version with no problems related to network was 10.5.8. All the other versions had issues of different kind (WiFi instability (lost signal), DNS problems (for wireless and wired connection) sometimes associated with machine sleep and wake up and sometimes with no reason.
    QUESTION: Is your problem independent of the access point / router you connect to.
    I must say networking was (and still is) the weakest part, besides the other OS X weaknesses I experienced during 4 years of OS X usage.
    No problems in the same network with Linux or Windows beeing ran natively on my iMac So hardware is OK.
    Software is of poor quality. Not much more to say in this matter.
    I found a very interesting article dated 1996 about programming which I think is still valid.
    Link to the article: http://www.fastcompany.com/magazine/06/writestuff.html
    Below the fragment (with some connection to Apple)
    Software is everything. It also s***s.
    "It's like pre-Sumerian civilization," says Brad Cox, who wrote the software for Steve Jobs NeXT computer and is a professor at George Mason University. "The way we build software is in the hunter-gatherer stage."

  • Xfinity app not working

    Trying to download Xfinity app.   Followed this link: http://xfinitymobilebb.mpsvcs.com/BBAutoUpdate.jsp.   Didn't work. Any suggestions?

    Hi AndrewBFrank,
    Sorry to hear you're having an issue installing an app to your device.
    With the BlackBerry 10 platform, .jsp files are not compatible.
    You will need to contact Xfinity for the download link for the BlackBerry 10.
    Thanks!
    -HMthePirate
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • L7 not working with computer. Please help.

    ok. so. my mom gave me her old L7 and when i plug it into my computer it is recognized as "removable disk F:" but when I click on it. it says "please insert drive into removable disk F:" then after iTunes opens the removable disk disappears.
    my goals are to:
    -get music on phone
    -and transfer photos from phone to computer
    I am running Windows XP

    Two things:
    1.) How old is this phone? Does it have iTunes on it? (Check the main menu).
    2.) Did you install the phone properly? It should be called "L7 (iTunes)" or something similar.
    If you can answer yes to both and it still doesn't work, then do this:
    Go right-click "My Computer" on the desktop OR the start menu shortcut (Windows XP for Start Menu shortcut). Then select "Manage" . Click "Device Manager" on the Microsoft Management Console and check for any errors with anything on the list at all. If not, then check Universal Bus Serial Controllers (USB) and see if L7 is on the list. If it's there with no error, then it should have been fine. Otherwise, right-click it and select "Uninstall". Finish the entire process by detaching the USB off the phone (if not already) and re-connect it. The installation should be properly done. By properly done, I mean that you should also restart your computer at the end. If this doesn't work out, then contact Motorola for more information on this situation.

  • If then Else statement not working under Computation in APEX

    Hi
    Can anyone help me where I am going wrong? I am trying to use the following code in Computation Process on Submit. I am not able to get the value. It's showing nothing.
    Page:
    *Item Name (Value Required)
    Type
    Static Assignment
    PL/SQL Function Body
    SQL Query (return single value)
    SQL Query (return colon separated value)
    SQL Expression
    PLSQL Expression
    Item Value
    Computation Point
    *Sequence (Value Required)
    Computation Point
    On New Instance (new session)
    Before Header
    After Header
    Before Region(s)
    After Region(s)
    Before Footer
    After Footer
    After Submit
    Source
    *Computation (Value Required)
    BEGIN
    IF :P3_AGING_DAYS <= '0' THEN
    :P3_AGING_BUCKET := 'Within due date';
    elsif :P3_AGING_DAYS > '0' AND :P3_AGING_DAYS <= '3' then
    :P3_AGING_BUCKET := 'Within 3 days';
    end if;
    end;

    1efb2968-171d-43f9-9d5d-d38151735ed7 wrote:
    Please update your forum profile with a real handle instead of "1efb2968-171d-43f9-9d5d-d38151735ed7".
    Can anyone help me where I am going wrong? I am trying to use the following code in Computation Process on Submit. I am not able to get the value. It's showing nothing.
    BEGIN
    IF :P3_AGING_DAYS <= '0' THEN
    :P3_AGING_BUCKET := 'Within due date';
    elsif :P3_AGING_DAYS > '0' AND :P3_AGING_DAYS <= '3' then
    :P3_AGING_BUCKET := 'Within 3 days';
    end if;
    end;
    A PL/SQL Function Body computation has to return a value rather than assigning it to an item in the PL/SQL block (APEX turns the block into the body of a function). The item for which the value is to be computed is specified in the computation properties (P3_AGING_BUCKET).
    begin
      return case
               when :p3_aging_days < 1
               then
                 'Within due date'
               when :p3_aging_days between 1 and 3
               then
                 'Within 3 days'
             end;
    end;

  • Gpresult html report creation not working for computer settings

    When I try and run a gpresult. all I get is this at the command prompt (as administrator). 
    gpresult /h c:\report.html
    ERROR:
    The error is particulary helpful ;-)
    I can successfully create a xml file with /x report.xml . Its a pain to read though.
    Also group policy results is also broken. I get the message:
    An error occurred while generating report:
    An unknown error occurred while the HTML report was being created.
    I have read the fixes involving editing install.ins to remove the imported zones. This doesn't fix the issue.
    It only occurs when I want the results from the computer settings. User settings work fine.
    The environment is Windows 7 with Server 2008 R2 DCs. We have 3 2012 servers where gpresult works when processing computer settings.

    Hi,
    Before going further, can we run
    gpresult/r, gpresult/v or gpresult/z
    to see whether we can collect computer settings? Besides, we can go to Event Viewer to see whether some error events were logged and keep us posted.
    Best regards,
    Frank Shen

Maybe you are looking for

  • Export to text problem

    <p>Hi ! Everyone,</p><p>I'm using crystal report 7. I report file which is calling from PB. Crystal report display the output properly.</p><p>When I'm trying to export to text format..it exports properly excepts few text columns get TRUNCATES....</p>

  • Got a new iPod touch and now i want it to be the iPod i can use on my iTune

    So i got an itouch to replace an older ipod of mine. But now my itunes only recognizes my old ipod and the only way i can get new stuff onto my new ipod is by syncing it which is fine but i can't create playlists or organize my music at all. So what

  • Is it possible to make my phone number private?

    I have a lot of contacts on Skype, but some of them I either do not know well enough or do not trust enough, and I don't want them to have access to my phone number unless I explicitly give it to them. I'm sure a lot of other people have the same iss

  • When will firefox stop supporting 3rd party cookies by default much like Safari does now?

    Safari by default doesn't accept 3rd party cookies and there have been reports that Firefox will follow suit. Any information in terms of the timeline as to when this will come into effect would be much appreciated! Thanks,

  • Satellite M100 shuts down automatically after about 10min

    Hey there guys :) My Toshiba Laptop has been powering off abrubptly and on it's own lately. When I turn my Laptop on, everything appears fine, battery if fully charged, AC adapter plugged in etc. However, after about 10 minutes of use it will just tu