Xfinity wireless/cable modem connected to Apple Time Machine

I set up my Xfinity wireless/cable modem by ethernet to my time machine. The set up appears to work (2 wireless networks with internet access) but the amber light on the time machine is flashing (not green)....is there some issue I'm missing?

Open AirPort Utility and click Manual Setup
Click directly on the word Status (2nd line on the summary page), and a window will open to explain why the amber light is flashing, along with suggested actions
What does the message say?

Similar Messages

How do I set up a connection from my time machine to my newly installed a wireless cable modem.

Hi, I previously I had an ethernet connection from a non-Wireless ADSL modem to my time capsule / airport base station. I now have a wireless cable modem. My mac book can no longer find the the airport base station and is unable to backup to the time capsule. Can my time capsule be set up to pick to use the modem WiFi? I previously used the Airport base station WiFi but I do not need to do that now.

Your modem is also a router that has wireless built in. It also has Ethernet ports on it. So connect your TC the same way as you did before. I don't thing you can connect the TC to your new modem/router box by WiFi and still use it as a backup point.

HT201974 I just installed a wireless cable modem for a desktop PC and my MacBook Pro; After installing, I changed the password on the wireless connection at the PC but it is not being recognized by Airport as the new password.

I just installed a wireless cable modem for a desktop PC and my MacBook Pro; After installing, I changed the password on the wireless connection at the PC but it is not being recognized by Airport as the new password. Can anyone help?

Hi twinkytomes,
Welcome to the Support Communities!
The article below may be able to help you with this.
AirPort Utility 6.x: Password-protect your wireless network
http://support.apple.com/kb/PH5119
Cheers,
- Judy

Connecting a Linksys Broadband Router to a Netgear wireless cable modem gateway

I was wondering how i would go about connecting a WRT54GS v2 Linksys Broadband Router to a Netgear CG814WG v2 wireless cable modem gateway. the reason I'm doing this is to get extra modem ports and i was just wondering what steps i would take to make it work correctly.

If you are trying to add WRT to your network to increase the number of ports then,you can cascade linksys router to wireless modem.Connect the Ethernet cable from the LAN port of the wireless gateway to the linksys router on the Ethernet port.Also,if the ip address of the Gateway is 192.168.0.1 then,change the ip address of the linksys router to 192.168.0.2.Also,disable the DHCP and Disable NAT under Advance routing on the linksys router.Power cycle the network and it will work.

HP P1102w Wireless Printer will not pair with a Motorola SBG6782-AC Wireless Cable Modem Gateway

I previously had AT&T U-verse Internet using an Arris IPDSL NVG510 Wireless Modem Gateway. My HP Laptop running Windows 8.1 and the HP LasrJet Pro P1102w Wireless Prnter routinely & automatically connected to the NVG510 Wireless Network without any problems over the past two years, and the wireless Printer worked without problems. I recently replaced the AT&T U-verse Internet connection with a 25 Mbs Comcast Xfinity Intrnet connection, using a Motorola Arris SURFboard SBG6782-AC Wireless Cable Modem Gateway. My HP Laptop running Win 8.1 Pro connects to the Network and accesses the Internet with no problems what-so-ever; However, the HP LaserJet Pro P1102w wireless Printer does connect to the Wireless network and I cannot Print at all from my laptop. I have tried all the P1102w Wireless Printer Setup suggestions from the HP Printer Support Site, but to no avail. I have also updated the Printer Firmware and Loaded the latest Full Product Installation & Driver Software. I have tried and re-tried these suggestions over the last two days, but with no luck. I would greatly appreciately any help from the experts in this Forum. to get the printer to work wirelessly, since we also wirelessly print to this printer from IPads and other wireless laptops.

Hi , I see that you are having issues connecting the printer to the new router. I would like to help you. I would reset the printer first to clear out any previous network settings.
Turn the printer off, hold down the wireless button and cancel (x button) while turning the printer back on and don't release the two buttons until the printer stops making noise. Print out a configuration report and make sure the SSID and IP address are cleared.
Printing a Configuration Page. If the network name has any spaces or special characters, the printer may not recognize it. The printer is only capable of sending/receiving in the 2.4 ghz band. If it is set to 5 GHZ network you may need to change to 2.4 ghz. (rename the 5 ghz or shut it off)
The WPA key setting needs to be on AES to work correctly not TKIP.Multi casting needs to be turned on.
Firewall on router has to have open ports for printer.
If you have Mac Filtering you need to give printer hardware address from Configuration page.You might need to contact your router company for further assistance to check those settings. Try running the Wireless Configuration Wizard from the HP software to configure the printer over the network. If you appreciate my efforts, please click the 'Thumbs up' button below.If you have any issues, please let me know what steps you have taken and the results. Thank You.

I had to replace my cable modem and now my Time Capsule only talks to just the one Mac Air. My other wifi devices (another Mac Air, iPad, and iPhone) can't get on the wifi. Any suggestions?

I recently replaced my cable modem and now my Time Capsule only works with the one Mac Air and not my other devices (another Mac Air, iPad, and iPhone). Any suggestions?

It sounds like you have gone from a cable router with the TC bridged to a cable modem with no router.. so the first device to connect pick up the IP address. Did the cable company give you the same model?? Check if it is a pure modem or a modem router.. and what the last one was.
Anyway.. you should redo the setup.. do you have any computer with ethernet?? Did you buy a USB to ethernet adapter for one of your airs.. very hard to do setup without ethernet.
Also download the new utility.. with the old style.
http://support.apple.com/kb/DL1482
If you happen to be on Lion.
Redo the setup and make sure you setup correctly to router mode if the cable modem has no router or bridge mode if it is a router.

Which cable modems work best with Time Capsule?

Which cable modems work best with Time Capsule? I have Time Warner in SoCal. I am replacing my old Motorola cable modem (constantly cuts out and needs to be reset) and I also bought a new Time Capsule. I will be using the Time Capsule for my wireless network and for back ups. Thanks.

These are the cable modems supported:
Vendor
Model
Motorola
SBG6580
Motorola
SB6141
Motorola
SB6121
Motorola
SB5101
Motorola
SB5101U
Motorola
SBG901
Netgear
CG3000D
Netgear
CMD31T
Zoom
5352
Zoom
5350
Zoom
5341J
ZyXEL
CDA-30360
If anyone has used one of these with Time Capsule, feedback is appreciated. Thanks.

I will be using a HDMI cable to connect an Apple TV box and a Comcast cable TV box to my TV. My TV has only one HDMI port.

I will be using a HDMI cable to connect an Apple TV box and a Comcast cable TV box to my TV. My TV has only one HDMI port.
To do this I will need a 2x1 HDMI splitter or a 2x1 HDMI auto switch (preferred).
?Is there any Apple TV HDMI port voltage?
When using a HDMI auto switch to connect two devices to a HDMI TV, the
Auto switch cable box only works for components that do not output continuous voltage over HDMI port when turned off.
Do you know of any other solutions? Componets? Actual expierances?
Full text below.
Cable : HDMI switches expand the number of available HDMI ports on a high definition television allowing connection of cable boxes, Blu-ray players, and game consoles. A side benefit is that cable clutter is also eliminated by running a single HDMI cable to your HDTV from a switch and relocating the HDMI ports to a concealed location. The problem with most HDMI switches is that you have to either get up to push a button, or hunt for the remote control, to switch sources. The true mark of any great switching component is an ability to perform its function and remain transparent in its operation. This automatic HDMI switch is a plug-and-play away from offering everything you are looking for in an HDMI switch. Select a single output from up to three devices for signal delivery to your HDTV. Smart operation provides complete control for connect-and-forget operation. Powering on a device gives it output priority over the other devices. By powering down the device in use, output priority is returned to the last powered on device. Note: Auto switch function only works for components that do not output continuous voltage over HDMI port when turned off.
Here is a typical HDMI 3-in 1-Out HDMI Auto Switch
http://www.google.com/products/catalog?q=hdmi+auto+splitter&rls=com.microsoft:en -us&oe=UTF-8&startIndex=&startPage=1&rlz=1I7GGLF_en&um=1&ie=UTF-8&tbm=shop&cid=1 0340892278237558532&sa=X&ei=fTPmTtOiHuXq0gGc3sHfBQ&ved=0CHsQ8wIwAA#
Thanks for any help. Sincerely,
HDMI auto switch?

Hi Erico,
I tried what you said again but without success. I even updated the driver so that that audio driver is the same as the graphics driver i.e.. NVIDIA but this has not helped either:
Do you have any other ideas?
Many many thanks,
Louise

Western Digital My Book World EditionI have bought a WD My Book World Edition to use for back-up of my iMac, but when I try and log onto the drive with Apple time Machine (back-up software) or connect in any other way i get the message 'There was a proble

I have bought a WD My Book World Edition to use for back-up of my iMac, but when I try and log onto the drive with Apple time Machine (back-up software) or connect in any other way I get the message 'There was a problem connecting to the server "MybookWorld.local" The version of the server you are trying to connect to is not supported. Please contact your system administrator to resolve the problem'
It is a brand new iMac and running Lion OSX
Any ideas on how to solve would be gratefully received?

Followed the directions on this page and it worked!
http://forums.macrumors.com/showthread.php?t=1102423
Part One - Turn on SSH (in the admin panel)
[1] Go to to http://mybookworld.local
[2] login: username will be admin, password will be whatever you have setup. If you can't remember it should be in your Mac OS X keychain (Utilities > Keychain Access, search for "mybookworld"). If you have not changed if from the default the password will be admin as well.
[3] Switch to advanced mode.
[4] From the System tab, pick Advanced.
[5] Enable SSH Access, and click submit.
[6] Click on the network tab and then the LAN button
[7] Make a note of the IP address
Small, maybe obvious, but nevertheless important point: For the install to work, your NAS needs to be connected to a router with internet access.
Part Two - Install netatalk2.2
[8] Open Terminal.app (Utilities > Terminal)
[9] Enter the following command (substitute in 127.0.0.1 for the actual IP address you noted down in step 7), then hit return:
Code:
ssh [email protected]
[10] When prompted, enter the ssh password (will be welc0me).
[11] You are now going to download the installer. Enter the following command, then hit return:
Code:
wget http://mybookworld.wikidot.com/local--files/netatalk2-2-on-whitelight/install_netatalk.sh -O install_netatalk.sh
[12] Once completed, you will need to run the installer. Type:
Code:
sh install_netatalk.sh
[13] You will be asked a number of question during install, answer yes to all. When asked about the "DHX2 login process", I opted to install the modified version, so I can confirm it works.
[14] Once the box has restarted, you should be able to connect to your afp shares and continue to use Time Machine.

Wireless cable modem

my inlaws are getting a computer for Christmas....they have Charter cable....they want wireless for the new laptop, so I was looking at the Motorola SURFboard gateway SBG901 DOCSIS 2.0 Wireless cable modem for them....Charter told them that they could rent a modem for $5 per mo or or buy one from them for $50 and then get a router from somewhere else or, even buy the modem somewhere else as well... Im not real computer savvy but I thought this would be a better solution....than to buy each individually....any thoughts or suggestions

I agree with buying separately for reasons above as well as interference issues.
"Most WiFi enabled access points operate in the 2.4 Ghz frequency range. This unlicensed frequency range is also shared by many common household and business devices such as cordless telephones and microwave ovens. Use of these devices within range of your wireless enabled ISP router can cause interference and other negative effects ranging from seemingly insignificant brief Internet outages up to the need for router resets."
Quote from http://www.hostmycalls.com/2010/03/09/wireless-enabled-isp-routers-will-cause-problems-with-hosted-v...

Can't connect to my Time Machine?

I migrated to Lion last week & have been unable to connect to my Time Machine, both for backing up my system & accessing earlier files. Is there a workaround on this? Do I need to reconfigure my Time Machine/Time Capsule to to accept the new operating system? The error message reads -
"Time Machine could not complete the backup. The backup disk image "/Volumes/....sparsebundle" could not be accessed (error -1)."
Any help is sincerely appreciated.

Please follow these instructions:
Lion: Connecting to legacy (pre-Lion) AFP services - and Mac OS X (server):
https://discussions.apple.com/thread/3258472

Is a WD My Book Studio Desktop 3TB Hard Drive - FW 400/800, USB 2.0, Apple Time Machine Ready external hard drive bootable with my Powerbook G4 12" PPC 10.5.8?

Sirs or madams,
Is my Powerbook G4 12” PPC 10.5.8 'bootable' with a Western Digital My Book Studio Desktop 3TB Hard Drive - FW 400/800, USB 2.0, Apple Time Machine Ready external hard drive? Western Digital says officially no, but that it MIGHT be. I primarily live in China and bought a datastorage.com.cn Clearlight s400+ external hard drive enclosure with a 320GB disk drive a few years ago in China. My computer 'boots' fine from it, but since I got it in China all the paperwork, etc. is in Chinese; my Chinese isn't quite sufficient enough yet to read it. But there are references to something called "SATA", whatever that is.
My level of computer 'under the hood' knowledge is extremely low. I've been told that SATA has some relationship as to whether or not an external hard drive will boot a computer via the Firewire connection, something relating to 'interface', which I assume is how separate electronic gadgets work, or don't work, with each other.
I frankly don't care much for computers, the internet, or their related gadgets such as all these fancy phones. I longingly reminisce about the days when there were no such things. I use a computer & the internet because I have to, and unfortunately unlike a car where one doesn't have to have 'under the hood' knowledge to operate it, just knowledge of the steering wheel, brake, gas, etc., one seemingly must know a ridiculously great amount of 'under the hood' knowledge, including jargon, to operate computers.
So, please try to respond accordingly; thank you.
If this particular external hard drive won't, for certain, be bootable with my computer, can you advise as to what readily available brand/model would be in the 3TB range for a similar price, roughly $150ish??
Thank you very much.

Mr. BGreg,
Thank you very much. "...under the covers...". I think you meant "under the hood", as in a car. I suppose "under the covers" would be man/woman interfacing, which I am familiar with!
Actually, I'm back in the US now for a few months. I looked at the OWC web site, but only cusorily so far. I'll contact them; they appear knowledgeable about Apple computers.
As to what you wrote about Western Digital's cases, I certainly wouldn't want a poor case. In China I had over time gotten 3 different external drive cases, 3 different Chinese brands, and separately bought Hitachi brand disk drives that 'simply' plugged into the cases. The drives are roughly 80GB 120GB and 320GB. The two larger ones are in cases that have Firewire plugs/jacks, which are bootable with my computer.
So my understanding, as you wrote, has been that my Powerbook will boot from an external hard drive, provided it connects via Firewire, and the disk drive itself is 'normally' formatted with however my computer's own disk drive is formatted, (HFS OS extended (journaled) or some such??). So I was left wondering why Western Digital would indicate that even though their such-and-so external hard drive case/drive was Firewire capable, that they would then say it would not be bootable with my Apple PPC computer......
Well, anyway, since you indicated Western Digital's case quality is suspect, then I'll try OWC and disregard Western Digital.
Naturally, OWC should be able to address this, but your thoughts are also welcome. You mentioned the OWC cases are good with Apples. Would the disk drives OWC supplied with the cases also be of relatively dependable quality?? From my so far only cursory look at their web site they appear to have various options, including case only options where I could insert my own or their own drives. These sorts of options seem preferable, also along with quality components.
My Powerbook has been in use since 2004. In China I put in a 1.25 memory 'chip' in the bottom and installed the 10.5.8 operating system, which I understand are the maximum workable with my Powerbook. When I inquired with Chinese friends if my 1.33 GHz processor could be taken out and a more powerful one put in, they said it wasn't feasible because in my particular computer my processor was, as I recall them saying, soldered/'permanently' connected with the 'motherboard', that it would just be easier to get a new computer.
I would be with them and they would nonchalantly open it completely up showing me all its tightly arranged 'innards' while at least giving it a good internal dust/dirt clean job for cheap lunch and a beer (& so much dirt/dust/lint there was!)...these are the same folks who build the things of course...fast moving hands with tiny screws flying everywhere, but everything 100% all back in place when finished.
My Chinese friends also said that nowadays Apples are not as well built as when my Powerbook was built, that nowadays an Apple's life expectancy was considerably lower, so I fear that when I get a new computer that, though it will be more up-to-date and powerful, etc., it most probably won't last near as long as my Powerbook has. They also said that in an older computer the fan was often the first component to go bad, and if a new one couldn't be easily found, as they said was my case, then you're just left with having to get an entirely new computer. Part of why I dislike electronic computer gadgets generally is that they are obsolete so quickly.
So, anyway, thanks very much for your information.

I have a mid2009 MacBook Pro for which I have been using a USB WD HD for Time Machine. I'd like to get a wireless HD and start a new Time Machine backup for this Mac and retire the 5 year old WD drive. Can I start over?

I have a mid2009 MacBook Pro running Mavericks for which I have been using a USB WD HD for Time Machine. I'd like to get a wireless HD and start a new Time Machine backup for this Mac and retire the 5 year old WD drive. Can I start over?

no archive/ backup is perfect, HD clones can be set to make incremental additions, same as time machine however, though they are more time involved in doing so.
See the + and - of all data backup/ archives below and "spread it around".... or the "dont put your eggs all in one basket" philosophy.
Peace
Data Storage Platforms; their Drawbacks & Advantages
#1. Time Machine / Time Capsule
Drawbacks:
1. Time Machine is not bootable, if your internal drive fails, you cannot access files or boot from TM directly from the dead computer.
2. Time machine is controlled by complex software, and while you can delve into the TM backup database for specific file(s) extraction, this is not ideal or desirable.
3. Time machine can and does have the potential for many error codes in which data corruption can occur and your important backup files may not be saved correctly, at all, or even damaged. This extra link of failure in placing software between your data and its recovery is a point of risk and failure. A HD clone is not subject to these errors.
4. Time machine mirrors your internal HD, in which cases of data corruption, this corruption can immediately spread to the backup as the two are linked. TM is perpetually connected (or often) to your computer, and corruption spread to corruption, without isolation, which TM lacks (usually), migrating errors or corruption is either automatic or extremely easy to unwittingly do.
5. Time Machine does not keep endless copies of changed or deleted data, and you are often not notified when it deletes them; likewise you may accidently delete files off your computer and this accident is mirrored on TM.
6. Restoring from TM is quite time intensive.
7. TM is a backup and not a data archive, and therefore by definition a low-level security of vital/important data.
8. TM working premise is a “black box” backup of OS, APPS, settings, and vital data that nearly 100% of users never verify until an emergency hits or their computers internal SSD or HD that is corrupt or dead and this is an extremely bad working premise on vital data.
9. Given that data created and stored is growing exponentially, the fact that TM operates as a “store-it-all” backup nexus makes TM inherently incapable to easily backup massive amounts of data, nor is doing so a good idea.
10. TM working premise is a backup of a users system and active working data, and NOT massive amounts of static data, yet most users never take this into consideration, making TM a high-risk locus of data “bloat”.
11. In the case of Time Capsule, wifi data storage is a less than ideal premise given possible wireless data corruption.
12. TM like all HD-based data is subject to ferromagnetic and mechanical failure.
13. *Level-1 security of your vital data.
Advantages:
1. TM is very easy to use either in automatic mode or in 1-click backups.
2. TM is a perfect novice level simplex backup single-layer security save against internal HD failure or corruption.
3. TM can easily provide a seamless no-gap policy of active data that is often not easily capable in HD clones or HD archives (only if the user is lazy is making data saves).
#2. HD archives
Drawbacks:
1. Like all HD-based data is subject to ferromagnetic and mechanical failure.
2. Unless the user ritually copies working active data to HD external archives, then there is a time-gap of potential missing data; as such users must be proactive in archiving data that is being worked on or recently saved or created.
Advantages:
1. Fills the gap left in a week or 2-week-old HD clone, as an example.
2. Simplex no-software data storage that is isolated and autonomous from the computer (in most cases).
3. HD archives are the best idealized storage source for storing huge and multi-terabytes of data.
4. Best-idealized 1st platform redundancy for data protection.
5. *Perfect primary tier and level-2 security of your vital data.
#3. HD clones (see below for full advantages / drawbacks)
Drawbacks:
1. HD clones can be incrementally updated to hourly or daily, however this is time consuming and HD clones are, often, a week or more old, in which case data between today and the most fresh HD clone can and would be lost (however this gap is filled by use of HD archives listed above or by a TM backup).
2. Like all HD-based data is subject to ferromagnetic and mechanical failure.
Advantages:
1. HD clones are the best, quickest way to get back to 100% full operation in mere seconds.
2. Once a HD clone is created, the creation software (Carbon Copy Cloner or SuperDuper) is no longer needed whatsoever, and unlike TM, which requires complex software for its operational transference of data, a HD clone is its own bootable entity.
3. HD clones are unconnected and isolated from recent corruption.
4. HD clones allow a “portable copy” of your computer that you can likewise connect to another same Mac and have all your APPS and data at hand, which is extremely useful.
5. Rather than, as many users do, thinking of a HD clone as a “complimentary backup” to the use of TM, a HD clone is superior to TM both in ease of returning to 100% quickly, and its autonomous nature; while each has its place, TM can and does fill the gap in, say, a 2 week old clone. As an analogy, the HD clone itself is the brick wall of protection, whereas TM can be thought of as the mortar, which will fill any cracks in data on a week, 2-week, or 1-month old HD clone.
6. Best-idealized 2nd platform redundancy for data protection, and 1st level for system restore of your computers internal HD. (Time machine being 2nd level for system restore of the computer’s internal HD).
7. *Level-2 security of your vital data.
HD cloning software options:
1. SuperDuper HD cloning software APP (free)
2. Carbon Copy Cloner APP (will copy the recovery partition as well)
3. Disk utility HD bootable clone.
#4. Online archives
Drawbacks:
1. Subject to server failure or due to non-payment of your hosting account, it can be suspended.
2. Subject, due to lack of security on your part, to being attacked and hacked/erased.
Advantages:
1. In case of house fire, etc. your data is safe.
2. In travels, and propagating files to friends and likewise, a mere link by email is all that is needed and no large media needs to be sent across the net.
3. Online archives are the perfect and best-idealized 3rd platform redundancy for data protection.
4. Supremely useful in data isolation from backups and local archives in being online and offsite for long-distance security in isolation.
5. *Level-1.5 security of your vital data.
#5. DVD professional archival media
Drawbacks:
1. DVD single-layer disks are limited to 4.7Gigabytes of data.
2. DVD media are, given rough handling, prone to scratches and light-degradation if not stored correctly.
Advantages:
1. Archival DVD professional blank media is rated for in excess of 100+ years.
2. DVD is not subject to mechanical breakdown.
3. DVD archival media is not subject to ferromagnetic degradation.
4. DVD archival media correctly sleeved and stored is currently a supreme storage method of archiving vital data.
5. DVD media is once written and therefore free of data corruption if the write is correct.
6. DVD media is the perfect ideal for “freezing” and isolating old copies of data for reference in case newer generations of data become corrupted and an older copy is needed to revert to.
7. Best-idealized 4th platform redundancy for data protection.
8. *Level-3 (highest) security of your vital data.
[*Level-4 data security under development as once-written metallic plates and synthetic sapphire and likewise ultra-long-term data storage]
#6. Cloud based storage
Drawbacks:
1. Cloud storage can only be quasi-possessed.
2. No genuine true security and privacy of data.
3. Should never be considered for vital data storage or especially long-term.
4. *Level-0 security of your vital data.
Advantages:
1. Quick, easy and cheap storage location for simplex files for transfer to keep on hand and yet off the computer.
2. Easy source for small-file data sharing.

Error "The Connection Failed" in Time Machine, Migration Assistant and Restore From DVD

I am receiving this error when trying to connect to my Time Machine Backup in my Time capsule. I input the proper password to access my Time Capsule and It returns me to the screen with the caption "The connection failed" under the Time Capsule name in the "Select your Disk" screen. What would cause this error. I am connecting via WIFI (AirPort) and have full signal. I am using Mac OSX 10.6.8
I recently had my 1TB hard drive replaced and I am attempting to restore using Time Machine, migration assistant or from the startup dvd (tried multiple ways, no success). The initial setup of mac OSX 10.6 would not let me connect or other attempts after erasing hard drive and reinstalling OSX from disk.
Worked on it all weekend and don't have enough beer to drown the frustration, any help is appreciated.

You are correct TM is not at all easy to do a full restore.
To answer your question: Yes TM disk does show up in finder.
After my initial startup setup I was able to start TM and access all my previous backups. I migrated some files and was able grab the data from finder. Not satisfied with that I tried to do a restore to that previous date, to no success. I then erased the HD and reinstalled OSx and tried again from the setup screen. That didn't work, sulked over some beers. I then tired with Migration assistant...same result (more beer).
In starting TM after trying MA, only one backup was showing in the Star screen (today). None of my previous backups were showing. Since exiting TM it has been "Making Backup Disk Available" ( xGB of 6.29GB). Considering the size, I can only assume that these are my previous backups.
I have reviewed Pondini's posts, FAQs, and tutorials. I am a little scared to try and locate the drives through Terminal as in Pondini's TS #6 guide. If I can get my previous backups to show up, I will be happy with dragging files from Finder to restore my data and slowly work at restoring my settings/applications.

Is the apple time machine is apple machine present in all 2TB WD passport portable drive

Is the apple time machine present in all 2TB WD passport portable drive

Welcome to Apple Support Communities
Time Machine is included in OS X, not in external drives, so no external drives come with Time Machine. You have to set it up in System Preferences > Time Machine > Select Disk, and selecting the external drive (it can be a Western Digital My Password drive if you want to). See > http://support.apple.com/kb/HT1427

Xfinity wireless/cable modem connected to Apple Time Machine

Similar Messages

Maybe you are looking for