XFX GeForce 7600GS 512mb AGP with MSI K7N2 Delta Problem

Hi, I have been searching in everyplace and still I havent find a solution.
I have the XFX GeForce 7600GS 512mb AGP card.
I use the MSI K7N2 Delta.
My Processor its the AMD 2600+ XP
my PSU its a 420watt
my RAM its 2gb DDR 400
I made everything in the bios, didnt work.
I updated the lastest drivers and bios, didnt work.
I went to a friend house, he use a P4 motherboard with 500watts. Worked, PERFECTLY.
I changed the card once (the first one didnt worked at all) but this one worked...
now the question is:
HOW I MAKE IT WORK IN MY PC ?????????
Can anyone help me? I dont wanna sell it to a friend for only 60$ (that the only costumer I have found for the card in Panama)

Heh I had problems with trying to see again was what happening in my PC but yesterday....
Ok I went to my friend house, we used the card with his 350 watts 15A in the 12V+ and it worked.
Then we tried to install the PSU but I dont know why its 4pin was incompatible with mine....
Well heres the important part: I went to a local Computer Store where they repair too and with another more powerfull PSU in my PC and the card didnt worked for seconds, but the guy played a little with my Ram and he noticed that its posible to that be the problem. Remember that my ram its a Kingston 400DDR 2X1 Gb running in the purple and the green slots of the mobo. when we changed them to both purples slots of the mobo the PC dosent work and make a the beep sound. I have the braket in my computer and it showed a red dot here: GR
GG
Gonna search the manual to know what that means.

Similar Messages

MOVED: XFX GeForce 7600GS 512mb AGP with MSI K7N2 Delta Problem

This topic has been moved to Retired motherboards.
https://forum-en.msi.com/index.php?topic=124849.0

Heh I had problems with trying to see again was what happening in my PC but yesterday....
Ok I went to my friend house, we used the card with his 350 watts 15A in the 12V+ and it worked.
Then we tried to install the PSU but I dont know why its 4pin was incompatible with mine....
Well heres the important part: I went to a local Computer Store where they repair too and with another more powerfull PSU in my PC and the card didnt worked for seconds, but the guy played a little with my Ram and he noticed that its posible to that be the problem. Remember that my ram its a Kingston 400DDR 2X1 Gb running in the purple and the green slots of the mobo. when we changed them to both purples slots of the mobo the PC dosent work and make a the beep sound. I have the braket in my computer and it showed a red dot here: GR
GG
Gonna search the manual to know what that means.

G4Ti4200-VTD64 voltage incompatibility with MSI K7N2 Delta-ILSR??

Hello,
I have the MSI G4Ti4200-VTD64 (4X) video card.. I want to upgrade my motherboard to K7N2 Delta-ILSR. Is there any voltage incompatibility?? I heard that new mother boards will support only AGP 1.5V. Is the AGP voltage of K7N2 Delta-ILSR 1.5volts?? Is my video card compatible with this voltage?? I really want to retain my current video card as I am quite satisfied with it and I'm not willing to invest on a new one at the moment. If there is an incompatibility could you suggest another Socket A MB with good performance and SATA RAID support.
Thanks in advance
Regards,
Joseph

Joseph,
All 4X Vid Cards work on all 4X and 8X mobos. All 4X mobos work with all 4X and 8X Vid Cards.
Take Care,
Richard

Replace K7N2-L with MSI K7N2 Delta FSR Socket A nforce2

Hi I think my Mainboard has fried , if this seems to be the case I will have to replace soon , I was wondering if I replaced my Existing K7N2-L Nforce 2 board for the MSI K7N2 Delta FSR Socket A nforce2 , will my Operating system realize that ive change boards , Its just i recall going from one Board to another in the past and I ended up having to reformatt my Machine as i was getting all sorts of problems ..
i have recently Formatted and I dont want to do it agian , I have a spare board but its a SIS chipset , and wont support my CPU or My Kids CPU .. Any help would be great Cheers Kurvz

You will need to do a repair install of Windows, and you will need to reinstall the mobo drivers. Formatting isn't necessary, and was probably not the last time either. A repair install will not damage any of your important files, and you will not need to reinstall other programs (perhaps a few monitoring programs), but the updates you made to Windows will be gone.

Lock Ups with MSI K7N2 Delta-ILSR [Resolved] thnx!

Well this is a first for me and it is driving me nucking futs !,
I have been building my own pc's for at least 10 years now and never had a problem where I have even needed to come to a forum like this. So as I see there are some very helpful and knowledgable peeps (nice work guys) here I thought I would ask as I have read through all stickies etc... and have not actually seen an answer to the problems of locking up. I am fast forming the opinion that this motherboard has a serious problem that MSI have not fixed yet. Anyway here is some info on the spec and what I have tried so far :
Have checked for viruses...
Did a fresh format and re-install...
Unplugged all that is not essential to run...
Symptoms..
Cannot write files to make a DVD in any authoring program.. it locks up after about 5 minutes
Locks up in most Games, some run for 5 mins then other times run for hours
Cannot run some setup.exe files (Like Zone Alarm Pro)
Sometimes (locks up just surfing)
Microsoft Word seems to mess up a lot and have to run the repair option..
IRQ Settings
IRQ 0   System timer   OK
IRQ 1   Easy Internet Keyboard   OK
IRQ 3   Communications Port (COM2)   OK
IRQ 8   System CMOS/real time clock   OK
IRQ 9   Microsoft ACPI-Compliant System   OK
IRQ 10   NVIDIA nForce PCI System Management   OK
IRQ 13   Numeric data processor   OK
IRQ 14   NVIDIA nForce 2 ATA Controller (v2.5)   OK
IRQ 15   NVIDIA nForce 2 ATA Controller (v2.5)   OK
IRQ 17   Creative SB Audigy   OK
IRQ 18   OHCI Compliant IEEE 1394 Host Controller   OK
IRQ 18   WinXP Promise FastTrak 376/378 (tm) Controller   OK
IRQ 19   NVIDIA GeForce4 Ti 4600   OK
IRQ 20   Standard OpenHCD USB Host Controller   OK
IRQ 21   NVIDIA nForce Networking Controller   OK
IRQ 22   Standard OpenHCD USB Host Controller   OK
Readings from MSI PC Alert 4
CPU Temp    : 48 C
System Temp    : 33 C
Vcore       : 1.63
3.3V       : 3.31
+5v       : 5.00
+12v       : 11.70
I am about seriously considering giving this board some cement legs and drowning it ! This is my first (and probably last) MSI board and cannot believe the problems so many seem to have. Maybe best and quickest option is to do just that and go buy a decent board.
Any help much appreciated.

Hi,
First of all thanks to all for the help, and CJLittle...LMAO ! My car is a Scooby and a nice blue paint job ! Believe it or not they assured me all this would work.. I bought it in one package and even questioned it. Also to be fair up until then they had always been very good... shows they have no zero about 3200XP 200 fsbetc... When I went back with the power supply and told them they changed it out and let me off on the extra money it should have been.
The crashes are as follows :-
[list=1]
Locks up after random amounts of time in games, sometimes dont even get to load it up at all, other times I can play 2 hours. When the games lock up usually there is a high pitch squeal and can only get out of it by reset or power off.
I cannot install Zone Alarm Pro or Agnitum Outpost are 2 anyway (there are others) these just come up with the installer screen and hangs there, I have to go to Task Manager to close them down, unlike the lock up in games.
The cooler is the Coolermaster Jet... and the temperature is more than acceptable (right now is 44 C) so I cannot see that at all being a factor.
leds are on on the d bracket when it locks, I did not know of this function and will check it out. Thanks for that tip.[/list=1]
Question from me: would the 2700 RAM cause these lockups ? I would have thought it would just not work at all ? If this is possible then I will go and change out the RAM as tuning it down to 166 (if it is possible) does not appeal to me ! But yes it may show what the problem is.
Thanks again, will see what happens...

Problems with MSI K7N2 DELTA ILSR

I set my bios to high performance defaults and now when i turn it on the diagnosis LED's say that the processor, then the RAM are damaged, but this isnt the case as i have tested them in a different machine and they are ok. I have tried clearing the CMOS using the jumpers but nothing happens. I have read on here that the way to solve this problem is to set the CPU FSB jumper to 100mhz... could somebody please tell me if there are any other usjestions about how to solve this please...
Nick

Quote
Originally posted by Nerdyjim
cheers.. is it worth going for a 3200+ Athlon, or should i save the money and go for a 3000+ Athlon??
Get something like a 2700+, I've got one, if I OC the FSB by 5, I achieve the performance of a 3200+, I can go higher, but I don't want to until I get a volcano 12, soon.

MSI KLN2 DELTA problem hangs after testing RAM

I currently purchased the MSI K7N2 DELTA-L (Motherboard) NFORCE2 CHIPSET DDR400 and for the cpu im using an athlon 1800+ and i just purchased some pc 3200(ddr400)of 1 gig(stick by Samsung) and i have a problem during boot up it's a really weird problem as soon as it says testing memory it goes up to 1048 detecting the 1 gig and it says ok saying single Channel and then as soon as it says detecting ide hard drives it hangs up. I can't even acess CMOS now i have had the problem for over a week, & send the motherboard back to xtreme gear that i bought, & they send me a new motherboard and it's the same problem. So I'm thinking that the mother board doesn't like the ram i purchased I have tested the ram on another system that supports pc3200 except it was on a system w/ a pentium 4 and it worked perfectly on that system. i have also put samsung 512 mb stick and same problem, does any one have suggestions or solutions, is samsung just not compatible with msi k7n2 delta series mother board or what else can it be, I can't update the bios cause right after or even sometimes b4 it says detecting ide hard drives it hangs up any solutions??????
The link to the ram i bought is
http://store.yahoo.com/dccsale/sa1gpc400mhz.html & I've tested it on a p4 motherboard with a pentium 2.6 and it worked perfectly but maybe its not the ram maybe the bios on the msi k7n2 deltas are very glitchy???

Do u think it might be cause im using an athlon 1800+ or is it my 1024 mb or 1 gig pc 3200 sometimes i do get something in the screen but right after testing the ram it hangs up or even if it says detecting the ide hard drives and nothing after that i know my vga card is fine i know my ram is fine and it's abviously not a hard drive issue so not sure what the problem is and it's basically impossible to flash the bios if i cant get in or even to load up where it checks the floppy... The only thing is if my cpu was bad i think nothing at all would load on the screen, but if it's possible i guess what esle can i do should i spend $150 and get a faster cpu like an athlon 2700+

MSI GeForce 7600GS 512MB DDR2, AGP8X - maximum resolution ?

MSI GeForce 7600GS 512MB DDR2, AGP8X
Hey, Does anybody know the maximum resolution of this graphics card? can it power a 30" Apple cinema display or the Dell 3007 ( 2560 * 1600 )

Quote from: d_sub on 28-March-07, 22:09:24
Hi, I installed the MSI 7600GS - Its working great so far. Having problems with Display Properties / VGA Clock - the settings reset to default after i restart windows? how do i get them to stick. Thanks
nice
about remaining things:
you have change VGA Clock freq. via MSI DOT or via Nvidia panel(e.g. coolbits)? there should be a checkmark "apply this settings at start up"
what drivers version you currently use?
use Driver Cleaner to remove currently drivers,
reboot.
then download and install latest one from Nvidia: http://www.nvidia.com/content/drivers/drivers.asp

MSI GeForce 7600GS 512MB AGP8x

Is anyone using an MSI GeForce 7600GS 512MB AGP8x to run a 30" monitor? Dell or Apple.
Thanks

https://forum-en.msi.com/index.php?topic=107008.0

MSI K7N2 Delta ILSR (MS 6570) trouble With ATA card

Hi, i have major trubble.
Ihave two 300gb, two 120gb and two 80gb harddrives + 1 DVD burner and 1 CD burner with ultra DMA 100 PCI card and it works fine without using the sata or ide3 raid function. I purchased an new PCI ATA 133 card and the system won't boot. I have tried for an long time to get the raid function to work but wihtout results with my old ATA 100 card (it works when i unplugg the ide cable from ide3).
Is there anybody that knows with type off PCI ATA 133 card that works or how too coop whith this problem.
I've got the latest bios ver. 7.8 but no difference
AMD XP2800+
Kingston 2x512mb
ATI Saphire Radeon 9600pro 256mb
Soundblaster Live Value
XP pro sp2
MSI K7N2 Delta ILSR (MS 6570)

I went to JME-Data and purchased an
True430
ATX 430 Watt Power Supply with PFC
For AMD™ and Intel® systems including
Pentium® 4
Dedicated output circuitry
Voltage feedback
Antec Low NoiseTechnology
AQ3 - Antec 3 year parts & labor warranty
True430 is a 430 Watt 6-output, dual fan-cooled ATX12V (Baby AT or PS/2 Size) power supply designed for personal computer or industrial applications.
Its ATX12V compliance allows its use with the latest Pentium 4 processors while its backward compatibility ensures its usability with any ATX-based AMD™or Intel® system
The prise 1099:-
And everything works great, Thank you very much for the tip. :-)
No more blue screen and it even works with my memory Kingston Value Ram 2x512 ddr400.
Is it possible to change the FSB from 166 to 200, and what should i think about before action. Like i said before i have an xp2800+
Alltså är det möjligt att få cpu gå på samma frekvens som minnena om man ökar FSB har några tip så är jag tacksam.
Att en nätdel kan göra så mycket helt otroligt TUSEN TACK för hjälpen till och med cpu tempen har sänkts från ca 56 till 46 grader fattar ingenting.

HD Led not working with SATA drives on MSI K7N2 Delta

I noticed the HD led does not work with the SATA drives on my MSI K7N2 Delta ISLR
I confirmed that the led is not burnt out by reconnecting a spare IDE HD with XP on it to IDE 1 and the led worked when there was activity, but it does not work when connected to IDE3 or if the SATA drives are connected to Serial 1 & 2.
Could it be because the motherboard doesn't support and hdd led for the Promise SATA controller.
I had Bios v7.3 and flashed to v7.4 with no luck.
Could a new bios update fix this problem?
Anybody seen this before?

basically it not wired up so works for no one

MSI K7N2 Delta keep rebooting with 2X512mb Dual channel

HI.....
I have a problem with my board K7N2 Delta, when i use 2X512mb pc3200 ram, doesn't matter which brand.... in dual channel, my pc keeps rebooting after a few seconds....some times i even cant get to windows.
i have tryed putting the ram in the different slots, but it is still the same.
booth brands of ram can run dual on other boards....
Should i change something in bios or.....?
What do i do wrong?
specs.
MSI k7n2 delta.... bios 6.0
Barton 2500+
maxtor9 80gb
asus 9550GE
2X512mb Kingston value

Quote from: DaveR on 20-May-05, 22:25:29
dram frequency should be 1:1, particularly so if having problems like so
fsb = 166. Also want memory bus at 166 Mhz, means ddr = 333
see if that gets rid of reboots
I have changed frequency to 1:1.......and i am actually running in dual channel now....
my ram are running 166 with timmings 2.5 - 3 - 3 - 7
before in single channel frequency
my ram was running 200 with timming 3 - 3 - 3 - 8
let see for how long it keeps going.

Problems with DMA (WinXP + MSI K7N2-Delta)

Hi!
I'm having problems with my IDE dvd-burner (NEC-1300) as I can't get it to use DMA in Windows XP. The motherboard is a MSI K7N2-Delta. I've tried using Nvidia's newest driverpack, 2.45, but in vain. The only mode I can use is PIO and it slows slows down the computer.
Thanks in advance!
Jussi Teppo

Quote
Originally posted by
wonkanoby
what drives make models in pc in detail
what else is on each ide
hows every thing jumpered
is it a modern 80 wire ide lead
On Primary Master I have a 60Gb Seagate Barracuda ATA IV. And the Secondary Master is the NEC-1300 http://www.necd.de/productdetail.php/id/672, which is supposed to be fully capable of UDMA-2 (33) as all the modern drives are (some are even UDMA66). The drive are jumpered as Masters. The wires are ok (UDMA100).
Registry editing suggested in a another message didn't work, neither did deleting the ide-channel.
I found a temporary solution to this: I placed the DVD-RW as Primary Slave and it works. The drive is detected as UDMA33-capable. Why it doesn't work as Secondary Master is beyond my knowledge.
Raven_
Yes, you guessed it. I do indeed live in Finland. Hur är läget?
Thanks to everyone for the effort!
Jussi Teppo

Kate needs HELP!!! MSI K7N2 Delta ILSR

Guys...
pls help me...
I am assembling, yes I know I am a techi girl...., msik7n2 with radeon9600 and 2xCorsair Value Select 256Mb DDR 400Mhz PC3200 mem...(hence 512mb)
I installed everything assembled it... booted and loaded fine for about 3 times...
and suddenly....
>power on
>no video
>no beeps
>after checking hard nothing happens...
>only thing I can tell is that the d bracket is indicating "memory section"
....d-bracket from MSI K7N2 Delta ILSR is 1,3,4 red and 2 green. Which is according the the manual "Memory Detection Test"-if the memory module is damaged or not installed properly.
Why woudl a memory suddenly not work?
I know I was adjusting bios for this and that....
I think just before this happened.. I adjusted something on agp setting... but what ahs that got to do with memory?
COuld it be the mobo or memory or the video card???
pls help....
My email is [email protected]...
please please help...
and guys in MSI what is your expert opinion? mobo? or memory?
Heeeeeeeeeeeeeeeellllp...
thanks...
Kate x

hi and welcome to this forum.
nice to se a girl here for a change
clear cmos jumper jbat1.
also try safe mode jumper j10 ans j11.
also try to reseat memory and dont trust the dbracket to 100%.
it can show wrong sometimes.
Quote
COuld it be the mobo or memory or the video card???
when you got it running then run http://www.memtest86.com to check memory,
also what psu do you have ?
post max amps on 3.3v 5v and 12v rails.
minimum is 28 35 16.recommended is higher.

MSI K7N2 Delta-ILSR (MS-6570) BSOD problems grrr

I recently purchased this board and although it is an awesome product, I'm having a problem with BSOD's when I play a game for a certain period of time
Specs:
MSI K7N2 Delta-ILSR (7.6 BIOS)
AMD Athlon XP 2800+ Barton
512MB (2x256MB) Samsung PC-2700 DDR memory (2.5-3-3-6 1T)
MSI 128MB GeForce4 Ti 4200 (4X AGP)
NVIDIA nForce on-board sound
Western Digital 80GB drive w/ 8MB cache
MSI X48 CD/CD-RW/DVD combo drive
Windows XP Professional SP1
PSU:
Turbolink 420watt (came with case)
+3.3V is 28A
+5V is 40A
+12V is 18A
So what happens is I get a STOP error during the game that shows the kmixer.sys driver as the culprit. Sometimes it's accompanied by PAGE_FAULT_IN_NON_PAGED_AREA too. I read somewhere that kmixer.sys has to do with windows audio and that it's a 3rd party driver issue or a memory issue. I'm using the latest NVIDIA 3.13 nForce platform drivers. I ran Memtest lastnight for 12 hours straight and 0 errors. I'm thinking the memory may not be compatible with the board nor dual channel, is this possible? I have also tried several different drivers for both video and chipset including MSI's own and I still get the kmixer.sys BSOD when playing games. My previous motherboard was an MSI KT3 Ultra2-R (MS-6380E) which I had no issues with. Any help would be greatly appreciated. Thank you in advance.
--Update--
I just tried to play a game with audio disabled and it crashed this time with DRIVER_IRQL_NOT_LESS_OR_EQUAL with nv4_mini.sys as the problem. My IRQ table shows some sharing, but device manager shows no conflicts.

Ok I tried running the DTM-CB3 module which is nForce2 approved at 3-4-4-11 2T timings and experienced the same result even at 2.6 and 2.7v. I tried both in dual-channel and same thing happened. However, I downloaded a program called Prime95 and ran the CPU torture test and the system returned a fatal error within the first few minutes. CPU Temp was at 57 C and the warning beep (set to 60C though) sounded intermittentley which is strange. I let it cool down then ran the torture test again and about 5min. later the system either seized completely or the program crashed. IE has also crashed randomly on me. I did this several times, before trying a different FSB/DRAM ratio. So I left the system at 200 FSB and used a 6:5 ratio so my memory was running at DDR333 and processor was a 3200+. I ran Prime95 again and the system locked up just as it did the other times. So after I did this a few times with consistent results. I went back and set the FSB to 166 and tried a 5:6 ratio so the memory was DDR400 and processor was the normal 2800+. I ran it again and to my suprise it passed all the tests and after an hour of this, I tried a game and that was perfectly fine as well. I checked the temps and CPU was only 45 C this time. So I'm thinking the processor can't handle anything above 50C or it's just plain overheating. I ordered a Thermaltake Silent Boost HSF today which is tested up to 3400+ so this should fix my problem. If not, then I'm going to replace the memory with a 512MB Geil PC3200 golden dragon dual-channel kit.

XFX GeForce 7600GS 512mb AGP with MSI K7N2 Delta Problem

Similar Messages

Maybe you are looking for