XFX Radeon HD 5450 not recognized

Have new H405 with Windows 7 Home Premium. When I install an XFX Radeon HD 5450 in the slot and boot up, nothing comes on the screen (was previously using this same card on a Dell Inspiron 530 S to enable to monitors and it worked fine). Any ideas?
Thanks,
Mpippa

There are at least six other threads on this subject already:
OpenGL Failure in Lightroom CC
GPU Acceleration not working
Lightroom 6.0 OpenGL acceleration not working with NVIDIA GTX 750Ti
Lightroom CC does not support Intel HD 3000 on MacBook Pro - please add support !!!!
GPU acceleration not working when exporting images on Lightroom CC
Which GPUs are supported with Lightroom 6?
Can we try and keep discussions all in one place, please?

Similar Messages

  • MSI Radeon R9 290 not recognized

    Hello people,
    I hope this is the right place to post this. Yesterday I bought components to build a new computer.
    - msi radeon R9 290 Gaming 4GB
    - 8 gb crucial ram
    - 240 gb crucial SSD
    - i5 4440 processor
    - MSI B85M-E33
    - Cooler Master GM-Series G550M
    - Cooler Master N200
    I can't install catalyst center, I can't recognize the card in windows devide manager. Even in the BIOS its says that the PCIE1 express lane is empty.
    So I think that my motherboard is not compatible with the R9 290? Is there anything I can do? Or do I have to buy a new motherboard?( fans of the graphicscard are running)
    Please help me:)
    Thanks!

    There is no reason why the vga shouldn't work with your board although it is not meabt for gaming. Try updating it to the latest bios version using integrated gpu.
    To update use the attached (!) bios archive and the >>Use the MSI HQ Forum USB flasher<<
    With the >>Use the MSI HQ Forum USB flasher<< point to the attached and NOT unpacked bios archive (Mode 1: Point to Archive).
    Let the tool prepare an USB stick for flashing and reboot from the stick. Like before after post switch to bad bios and let the tool update bios. It will flash to the version 3.5.

  • Lightroom CC - Windows 7 - AMD Radeon HD 6700 not recognized

    Just upgraded to Lightroom CC, discovered that my HD 6700 GPU is disabled.
    Photoshop CC however has no issues with the HD 6700:
    I checked for the latest AMD driver but that one was already installed. OpenGL Extensions Viewer confirmed that GL support is 100% up to version 4.4.
    Some supporting info:
    I also installed and tried out the latest AMD Betra driver (labeled 15.4Beta), with no change:
    Thanks for your assistance.

    There are at least six other threads on this subject already:
    OpenGL Failure in Lightroom CC
    GPU Acceleration not working
    Lightroom 6.0 OpenGL acceleration not working with NVIDIA GTX 750Ti
    Lightroom CC does not support Intel HD 3000 on MacBook Pro - please add support !!!!
    GPU acceleration not working when exporting images on Lightroom CC
    Which GPUs are supported with Lightroom 6?
    Can we try and keep discussions all in one place, please?

  • Radeon HD 7850 not recogniced

    I have a  Z77A-G43 board and he can not find my graphics card (HD 7850)
    My cable for my screen is well connected to the card and have image. The fans are running. If I do a test with PC mark7 he gives as result: Memory 32 MB
    Core clock 0 MHz
    Memory clock 0 MHz
    I have a 450w power supply. Anyone have an idea?

    No, use the forum flash tool.
    >>Use the MSI HQ Forum USB flasher<<
    Use option one and point it at the entire compressed archive.
    https://forum-en.msi.com/index.php?topic=161593.msg1209632#msg1209632
    A manual flash will not flash the me extension. You can do this on any computer, as the flash tool only prepares the flash drive.
    That psu says it has a 37A single rail so if true should be alright.  Problem is that can't be true as 37x 12= 444Watts wouldn't be any room overall for the other rails. It's also called a super flower.....

  • Why is Photoshop not recognizing my newly installed video card?

    I just installed a new XFX AMD ONE 1GB 5450 video card and have updated the drivers, but Photoshop CS6 is not recognizing it. Any replies with help is greatly appreciated.

    See if this helps:
    http://helpx.adobe.com/photoshop/kb/photoshop-cs6-gpu-faq.html
    If you provide more information about your platform, exact version of the OS, machine specs, etc. maybe someone can assist you further.
    Please read this FAQ for advice: 
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Nano 3rd generation recently purchased is not recognized by iTune Account

    I recently purchased a Nano 3rd generation that has no songs or any other type of media on it.  It does have a device name "user1". I need to change the device name to match my current iTunes account so that it can be synced with iTunes.  I ran the diagnostics but while iTunes seemed to find the device, the sync test would fail.  See below.  I am trying to find out how to correct this problem so the device can be loaded with the current library. 
    Microsoft Windows Vista Home Premium Edition Service Pack 2 (Build 6002)
    Acer, inc. Aspire 6530
    iTunes 11.0.1.12
    QuickTime 7.7.3
    FairPlay 2.2.32
    Apple Application Support 2.3.2
    iPod Updater Library 10.0d2
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 6.0.1.3
    Apple Mobile Device Driver 1.63.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.xxx
    Gracenote MusicID 1.9.6.xxx
    Gracenote Submit 1.9.6.xxx
    Gracenote DSP 1.9.6.xx
    iTunes Serial Number 002xxxxxx32D02xx
    Current user is not an administrator.
    The current local date and time is 2013-01-23 09:39:04.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information
    Advanced Micro Devices, Inc., ATI Radeon HD 3200 Graphics
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Device Connectivity Tests ****
    iPodService 11.0.1.12 is currently running.
    iTunesHelper 11.0.1.12 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Standard Enhanced PCI to USB Host Controller.  Device is working properly.
    Standard OpenHCD USB Host Controller.  Device is working properly.
    Standard OpenHCD USB Host Controller.  Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    Connected Device Information:
    USER1'S IPO (F:\), iPod nano (3rd Generation) running firmware version 1.1.3
    Serial Number:       5U7405V7YXT
    Bus Speed:             61440
    **** Device Sync Tests ****
    No iPod, iPhone, or iPad found.

    Start by working through all of the troubleshooting suggestions here.
    iPod not recognized in 'My Computer' and in iTunes for Windows
    B-rock

  • Toshiba StorE Art 2Tb External Hard Drive not recognized by HP Elite /Win7

    I have a new HP Elite Desktop running Windows 7 Home Edition:
    I bought some few months ago a Toshiba Store Art 2Tb Ext Hard drive, which until today worked well. Today I started the PC in the morning (with no update of Windows or other software) to find it would no longer recognize the Toshiba Hard drive. It still recognizes the WD drives, and the SimpleTech drives when they are plugged in. All External Drives are powered separately and do not rely on USB power.
    I tried the Store Art on other PC's and it works fine. I tried switching the cables, and the cable works on other drives, (and other cables will not make this Store Art work). I tried several USB 2 ports on the PC, with no luck *(but all ports work with the other drives).
    I tries COMPUTER, MANAGE, and checked Drvivers and Disks. There was no sign of the Disk available (no malfunctioning disk), it was just not there at all.
    I searched the web - tried a range of techniques (unplugging PC from power) and more. No luck.
    The PC Specifications are:
    Operating System
    MS Windows 7 Home Premium 32-bit SP1
    CPU
    Intel Core i3 530 @ 2.93GHz 30 C
    Clarkdale 32nm Technology
    RAM
    3.00 GB Dual-Channel DDR3 @ 665MHz (9-9-9-24)
    Motherboard
    MSI 2A9Ch (CPU 1) 38 C
    Graphics
    HP L1906 (1280x1024@60Hz)
    ATI Radeon HD 5450
    Hard Drives
    488GB Seagate ST3500418AS (SATA) 31 C
    Optical Drives
    WD Virtual CD 1110 USB Device
    hp DVD-RAM GH60L
    Audio
    Realtek High Definition Audio
    Works well with all other drives. and it worked with Toshiba till this morning.
    Any clues?
    thanks

    Well - this is incredible. After leaving the Ext Store Art Drive turned off all day ( but the PC was left on) | cam home ready to try the advice of Keaney (thanks for your advice) which was the same as the techies at work: Try to roll back to OS to last good restore point - eg a week ago. Just before I did anything like that - I just flipped it on to see if a miracle occurred. Guess what. It fired up, was recognised, and all is working.
    This is amazing - since my original posting: the PC has not been restarted, not been turned off, not been updated with new OS updates, has not had anything except normal web usage. Similarly the Store Art Ext HDD has been left off for the day, and just turned on tonight - not change plugs or cables or USB or anything. No cables have been touched or plugs jiggled. It just works.
    Its like there is a gremlin there - teasing me, testing me, causing me havoc - and laughing all the way. I have no idea how this happened - but will monitor to see if it happens again.
    thanks for the suggestions to resolve - for now I will do nothing.

  • Mac Pro not recognizing bootable DVDs and Disk Utility giving odd results.

    My issue is complex, but I'll try my best to explain it as I can.
    One has been resolved it seems, but I am including it so that the whole issue can be seen in context.
    Friday, May 16, 2014
    Last night, after rebooting my Mac Pro from my Bootcamp partition (I'm using Windows 7 Professional if that information is helpful) I received a kernel panic upon Mac OS X booting (Mac OS X 10.6.8).
    My first action was to launch Disk Utility to verify the Mac HD, verify was stopped by disk utility citing that I should insert my Mac OS X install DVD and repair the disk.
    I tried booting from my Snow Leopard install DVD. After the grey Apple logo appeared with the gear spinning below it remained for roughly ten to fifteen seconds (a little long) — then the Apple logo changed to. A grey prohibitory sign (circle with a diagonal line through it, the spinning gear remained. — I tried booting from the Snow Leopard DVD a few time, same result.
    Following this I tried booting using Disk Warrior, same result again.
    I tried booting both the Snow Leopard and Disk Warrior DVDs in both my upper and lower optical drives, with no change.
    I decided to leave the issue and call Apple Support in the morning
    Saturday, May 17, 2014
    This morning I woke my Mac Pro from sleep, opened Disk Utility and tried verifying the hard drive to see if it was temporary — same result, 'please insert the Mac OS X install DVD and repair the drive.' — I also tried booting the install DVD again with no result.
    I then booted my Mac into Safe Mode to check my hardware.
    Upon opening Disk Utility and verifying my Mac HD — the result "Macintosh HD appears to be OK", rand the test again to see if this was an anomaly, but disk returned another pass.
    I performed a normal restart of my system, although Finder was a little slower to load than normal, the system booted correctly. — I then launched Disk Utility and verified the Mac HD, it returned another pass.
    This confused me, after a call to Apple Support the tech explained that 'sometime a Safe Mode boot will fix problems because it disables all non-essential processes when booting. — That makes sense to me.
    However.
    The issue of my Mac not recognizing bootable DVDs remains — it reads disks correctly, it just will not boot them.
    Other steps I have taken to try and resolve this remaining issue.
    1. a PRAM reset. — No change.
    2. an SMC reset. — No change.
    3. Removal of newly installed RAM. — I have tried both running the old and new RAM separately, no change using either combination.
    4. Running bootable DVDs in different optical bays. — No change from both bays.
    a. My upper drive is an MCE Blu-Ray/DVD combo drive, but I have booted from this drive before. (Less than six months old.)
    b. My lower drive is LG DVD-RAM combo drive, I have also booted from this drive before. (Over one year old, replacement for an Apple optical drive.)
    None of the above steps have helped, I still cannot boot from my optical drives — I always receive a prohibitory sign shortly after the Apple logo.
    Other system information:
    Mac OS X 10.6.8
    8GB of RAM (4 x 2GB)
    500GB Western Digital Caviar Blue HDD (less than a year old, boot drive for Mac OS X 10.6.8)
    1TB Samsung HDD (for data storage and also containing Bootcamp partition)
    2TB HDD (cannot remember manufacturer, contains Time Machine backups, as well as data storage)
    ATI Radeon HD 5770 with 1GB of VRAM
    Sorry for the long post but I really need to be able to boot from my optical drives.

    Update: found an old Mountain Lion installation USB flash drive I created a while back.
    I am able to boot from the ML USB flash drive, but am still unable to boot from my either my Snow Leopard Install DVD or my Disk Warrior DVD. — I have verified both DVD and they pass verification tests.
    This leads me to believe that the problem resides either in the Mac, or in BOTH  the Snow Leopard and Disk Warrior DVDs.
    Since I am able to boot from a USB drive, I will look into the possibility of creating a bootable Snow Leopard drive, and perhaps also a Disk Warrior drive — at least until I can resolve the 'not able to boot from DVD' issue.

  • XfX Radeon Hd 6770 ~ Optimized Driver?

    Hello , I have a XfX Radeon Hd 6770 Graphics card , I have it perfectly put into my PC and its on and the fan is spinning , - Using a GX 650W power supply . But when i put in my installation CD it tells me it doesn't Detect and and that i should restart my PC to fix it but ive done that and it does not work , it also says keep going to install the driver but when i press anything , like express install user guide ANYTHING ! it tells me to go to www.xfxforce.com to download some type of driver but this driver and or link does no exist . so im at a loss on what to do , i disabled my old chipset nothing , and then i even uninstalled it and it still has the same issue . My PC just does not detect it !The graphics card is on and working fine .... PLEASE HELP !
    I have a HP Pavilion P6000 Series - replacing the Radeon HD 4200 Chipset
    This question was solved.
    View Solution.

    I would recommend moving this to the Desktop support forum and also post the Product / Model No of your PC. Link Below.
    http://h10025.www1.hp.com/ewfrf/wc/findModel?cc=us​&dlc=en&lc=en 
    I am an HP Employee. I am speaking for myself and not for HP.
    ---- If my answer was helpful please click the "Kudos" star to say. Thank You.
    If your problem is solved please click the "Accept as Solution" button ---->

  • Updated ATI Radeon HD 5450

    I have a HPE - 350t using Windows 7 and I recently installed an update for the  ATI Radeon HD 5450. Since then the video and audio on my computer system is not working. When I ran the diagnostics I had an Abnormal Exit on both the Primary Surface Test and the Color Line Test. On the Video Memory Test on got the a Internal Error message : Structured Exception: EXCEPTION_ACCESS_VIOLATION Stack Trace: stack trace functionality is not implemented for 64 bit.(end stack trace) Stack Trace: !!! Stack Trace exceptions not supported in 64-bit. !!!
    So now what do I do? If HP sent me the install how do I undo it?

    Wofatswife, welcome to the forum.
    When requesting help you should always include the make/model (i.e. p6-xxxx) of the computer and/or monitor. This information is necessary for us to review the specifications of them.
    You say the audio and video are not working.  Can you see the screen?
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Graphic card ATI RADEON HD 5450 and EMPIRE TOTAL WAR

    I've installed EMPIRE TOTAL WAR
    I plaied some days, but suddenly now I've a video problem and when start a game the video is not ok.
    It is very strange, I'v plaied some days, but now, nothing.
    I have an ATI RADEON HD 5450
    What is the possible problem?
    Thanks for every help
    Paolo, form Italy

    Paolo, the first thing that I would do is install the latest patch for the game.  Next, install the latest software suite from ATI; Catalyst Control Center.  This will allow you to control the fan speed of the video card.  If this doesn't solve your problem, let us know.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • ATI Cedar PRO [Radeon HD 5450/6350] GPU acceleration disabled

    Hi,
    my graphics card is a
    01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Cedar PRO [Radeon HD 5450/6350]
    i've installed xf86-video-ati, ati-dri, mesa and linux-firmware.
    if i have a radeon entry in my mkinitcpio.conf or a entry in my /etc/modules-load.d/modules.conf, i get acceleration not enabled:
    [ 15.348683] radeon 0000:01:00.0: disabling GPU acceleration
    any ideas anyone?
    thanks for your help
    mongohorst

    cat /etc/mkinitcpio.conf
    # vim:set ft=sh
    # MODULES
    # The following modules are loaded before any boot hooks are
    # run. Advanced users may wish to specify all system modules
    # in this array. For instance:
    # MODULES="piix ide_disk reiserfs"
    MODULES=""
    # BINARIES
    # This setting includes any additional binaries a given user may
    # wish into the CPIO image. This is run last, so it may be used to
    # override the actual binaries included by a given hook
    # BINARIES are dependency parsed, so you may safely ignore libraries
    BINARIES=""
    # FILES
    # This setting is similar to BINARIES above, however, files are added
    # as-is and are not parsed in any way. This is useful for config files.
    # Some users may wish to include modprobe.conf for custom module options
    # like so:
    # FILES="/etc/modprobe.d/modprobe.conf"
    FILES=""
    # HOOKS
    # This is the most important setting in this file. The HOOKS control the
    # modules and scripts added to the image, and what happens at boot time.
    # Order is important, and it is recommended that you do not change the
    # order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
    # help on a given hook.
    # 'base' is _required_ unless you know precisely what you are doing.
    # 'udev' is _required_ in order to automatically load modules
    # 'filesystems' is _required_ unless you specify your fs modules in MODULES
    # Examples:
    ## This setup specifies all modules in the MODULES setting above.
    ## No raid, lvm2, or encrypted root is needed.
    # HOOKS="base"
    ## This setup will autodetect all modules for your system and should
    ## work as a sane default
    # HOOKS="base udev autodetect pata scsi sata filesystems"
    ## This is identical to the above, except the old ide subsystem is
    ## used for IDE devices instead of the new pata subsystem.
    # HOOKS="base udev autodetect ide scsi sata filesystems"
    ## This setup will generate a 'full' image which supports most systems.
    ## No autodetection is done.
    # HOOKS="base udev pata scsi sata usb filesystems"
    ## This setup assembles a pata mdadm array with an encrypted root FS.
    ## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
    # HOOKS="base udev pata mdadm encrypt filesystems"
    ## This setup loads an lvm2 volume group on a usb device.
    # HOOKS="base udev usb lvm2 filesystems"
    ## NOTE: If you have /usr on a separate partition, you MUST include the
    # usr, fsck and shutdown hooks.
    HOOKS="base udev autodetect pata scsi sata encrypt filesystems usbinput fsck"
    # COMPRESSION
    # Use this to compress the initramfs image. By default, gzip compression
    # is used. Use 'cat' to create an uncompressed image.
    #COMPRESSION="gzip"
    #COMPRESSION="bzip2"
    #COMPRESSION="lzma"
    #COMPRESSION="xz"
    #COMPRESSION="lzop"
    # COMPRESSION_OPTIONS
    # Additional options for the compressor
    #COMPRESSION_OPTIONS=""
    cat /etc/modules-load.d/modules.conf
    radeon

  • ITouch Will Not Sync & Is Not Recognized

    My iTouch is new & will no longer sync; I created three new playlists and it did sync a second time. I reset ALL the settings, no sync, I reset back to factory settings and it will not recognize the itouch when I plug it into my Laptop it makes a noise but will NOT sync.
    Here are the diagnostics test run:
    Microsoft Windows XP Professional Service Pack 3 (Build 2600)
    Dell Inc. MP061
    iTunes 9.1.0.79
    QuickTime 7.6.6
    FairPlay 1.7.16
    Apple Application Support 1.2.1
    iPod Updater Library 9.0d11
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 3.0.0.102
    Apple Mobile Device Driver 1.46.0.0
    Bonjour 2.0.0.34 (214.3)
    iTunes Serial Number 5CAD060A08EE10AC
    Current user is an administrator.
    The current local date and time is 2010-04-12 18:34:38.
    iTunes is not running in safe mode.
    Video Display Information
    ATI Mobility Radeon X1400
    ** External Plug-ins Information **
    No external plug-ins installed.
    ** Network Connectivity Tests **
    Network Adapter Information
    Adapter Name: {892C6C6D-1D58-462B-8AE6-860D15449FCA}
    Description: Dell Wireless 1390 WLAN Mini-Card - Packet Scheduler Miniport
    IP Address: 0.0.0.0
    Subnet Mask: 0.0.0.0
    Default Gateway:
    DHCP Enabled: Yes
    DHCP Server: 255.255.255.255
    Lease Obtained: Thu Aug 07 00:09:22 2008
    Lease Expires: Thu Aug 07 01:09:22 2008
    DNS Servers:
    Adapter Name: {CF46891A-D340-484D-A4DF-DEFCE0A68253}
    Description: Broadcom 440x 10/100 Integrated Controller - Packet Scheduler Miniport
    IP Address: 207.38.208.84
    Subnet Mask: 255.255.248.0
    Default Gateway: 207.38.208.1
    DHCP Enabled: Yes
    DHCP Server: 209.122.64.91
    Lease Obtained: Fri Apr 09 20:03:45 2010
    Lease Expires: Fri Apr 16 20:03:45 2010
    DNS Servers: 208.59.247.45
    208.59.247.45
    208.59.247.46
    Active Connection: LAN Connection
    Connected: Yes
    Online: Yes
    Using Modem: No
    Using LAN: Yes
    Using Proxy: No
    SSL 3.0 Support: Enabled
    TLS 1.0 Support: Enabled
    Firewall Information
    ZoneAlarm Firewall is installed.
    Connection attempt to Apple web site was successful.
    Connection attempt to iTunes Store was successful.
    Secure connection attempt to iTunes Store was successful.
    Secure connection attempt to iPhone activation server was successful.
    Last successful store access was 2010-04-12 16:40:00.
    ** CD/DVD Drive Tests **
    LowerFilters: PxHelp20 (2.0.0.0), drvmcdb (1.0.0.1), sscdbhk5 (1.0.0.1),
    UpperFilters: GEARAspiWDM (2.2.0.1),
    D: TSSTcorp DVD+-RW TS-L632D, Rev DE03
    Drive is empty.
    Writing CD text is turned on in the preferences. If you’re having problems burning CDs, try turning this preference off.
    ** iPod/iPhone Connectivity Tests **
    iPodService 9.1.0.79 is currently running.
    iTunesHelper 9.1.0.79 is currently running.
    Apple Mobile Device service 3.0.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
    FireWire (IEEE 1394) Host Controllers:
    OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
    Most Recent Device Not Currently Connected:
    iPod touch running firmware version 3.1.2
    Serial Number: 9C949NXL6K4
    ** iPhone/iPod Touch Sync Tests **
    No iPhone or iPod found.
    Thank you!

    Did you try to connect in recovery mode? http://support.apple.com/kb/HT1808
    Device not recognized in windows: http://support.apple.com/kb/TS1495
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date: http://support.apple.com/kb/TS1538

  • S205 w/ Windows Home Premium not recognizing Integrated WebCam - Windows 7 Drivers?

    I just got an awesome deal on an S205 netbook. Everything is great except that I cannot get the WebCam to work. This is a deal breaker. If I can't figure it out I'll be returning it.
    So far I have tried various things. When I first started this I couldn't figure things out. There was no camera in the Device Manager and nothing obvious on the system (hardware, software) about a camera, except that I can see it, physically on the netbook and know it came with a WebCam. How to use it? Nada. So I went to the Lenovo site & installed a driver and then Skype. The microphone works in Skype, but no picture. Totally black. However, it automatically brings up Lenovo YouCam when you test the video in Skype. So that helped as this software was not recognizing a camera either, so I knew it wasn't just Skype.
    Then I figured out that I needed to hit Fn+Esc to enable the webcam. I thought that was the ticket. However, as soon as I did that I got a message that the USB device was not recognized. I uninstalled the driver and went back to reinstall it to see if that might help, however at this time I realized that the driver's on Lenovo's site for the s205 are for XP not Windows 7. Seriously? Turns out there are two different sites. http://support.lenovo.com and http://consumersupport.lenovo.com The later has the Windows 7 version, the first site lists Xp drivers ... Installed the W7 Driver again, but still not working or recognizing the camera ... Anyway, I am not a techie, but I am pretty decent at figuring stuff out or Googling and researching this stuff online. Or following your directions/suggestions. From my searching so far no one seems to have this exact issue. Most it is either not having software to use the camera or not having it enabled and neither of these are my issue. Any ideas for what my next step should be? Details on my system below. Thanks!
    Lenonvo ideaPad - 11.6" 1366x768 LED; AMD Dual-Core E-350 1.6GHz; 4GB RAM; 500GB HDD; 802.11n; Windows 7 Home Premium; ATI Radeon HD6310M graphics; webcam; 6-cell battery
    Solved!
    Go to Solution.

    I've had some webcam issues, too.
    Sadly, the webcam device ID is not listed in the driver available for download at the support page.
    Thus, installing this driver is pointless.
    Nevertheless, you can force the driver installation and it will work as it should.
    Please have a look at the device manager.
    Double-click the unknown device, go to Details and select the Hardware ID property.
    It should be USB\VID_5986&PID_0292&REV_1403&MI_00
    (In case you got a different VendorID/ProductID, google them. You should quickly find something. Be sure this device is the webcam and not some other device. Otherwise don't continue.)
    Now unpack the driver setup file with 7-zip or WinRaR.
    Back to the Device Manager -> Double-click the device, select the Driver tab, click Update Driver and browse for the extracted folder. You will need the Bison subfolder.
    Good luck.

  • After installing fedora in my laptop touch pad is not recognizing by OS

    am having lenovo 3000 g430 , yesterday i installed fedora 7 in my laptop.
    installation was successfull but the touch pad is not recognizing , is there any way to resolve this issue
    thanks in advance

    Kenz,
    Here is the link for the touchpad driver for fedora
    Have you tried to enable "gsynaptics touch"? 
    You will have a file called xorg.conf in the etc directory '/etc/X11/xorg.conf' .It should look something like this 
    # Xorg configuration created by system-config-display
    Section "ServerLayout"
    Identifier "single head configuration"
    Screen 0 "Screen0" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "InputDevice"
    # keyboard added by rhpxl
    Identifier "Keyboard0"
    Driver "kbd"
    Option "XkbModel" "pc105+inet"
    Option "XkbLayout" "us"
    EndSection
    Section "Device"
    Identifier "Videocard0"
    Driver "radeon"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Videocard0"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    Add this section below the keyboard but above the video card:
    Section "InputDevice"
    Driver      "synaptics"
    Identifier  "TouchPad"
    Option      "SendCoreEvents"
    Option      "Protocol" "auto-dev"
    Option      "SHMConfig" "on"
    Option      "Emulate3Buttons"
    Option      "VertTwoFingerScroll" "false"
    Option      "HorizTwoFingerScroll" "false"
    Option "HorizScrollDelta" "0"
    Option "TapButton1" "0"
    Option "TapButton2" "0"
    Option "TapButton3" "0"
    EndSection
    and then add this to the server layout section just below the line for the keyboard:
    InputDevice    "TouchPad" "CorePointer"
    Cheers and regards,
    • » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
    ●๋•کáŕádhí'ک díáŕý ツ
    I am a volunteer here. I don't work for Lenovo

Maybe you are looking for