XGestures on OSX with AE CS3 won't function, but with Photoshop CS3 it functions fine. . .

Hi There,
Is anybody out there using xGestures for the Mac OSX 5.3.2? I am able to get it to function properly in Photoshop CS3, but not in AE CS3.
Are Photoshop CS3 and AE CS3 built on different platforms for OSX? That is, is one a Carbon app and the other a Cocoa app? That may be the reason Photoshop works with xGestures and AE doesn't, but xGestures is said to support both kinds of apps. Any thoughts?
Thanks,
Laz
Link to xGestures:
http://alum.hampshire.edu/~bjk02/xGestures/index.htm

My applause to you for posting your findings about the fix you discovered.
Somehow, all these little fixes that users have been discovering in drips and drabs ought to all be gathered in once thread, or in the FAQ section here, or something.
Thanks for your addition to the knowledge well.

Similar Messages

  • I am trying to install xcode on a macpro running OSX 10.6.8 .  It installs, but with the error that there is no unix support.Do I have to upgrade to Lion 10.7 to do this? And if so, is this a free upgrade if I have the extended 3 yr support?

    I am trying to install xcode on a macpro running OSX 10.6.8 .  It installs, but with the error that there is no unix support.   Do I have to upgrade to Lion 10.7 to do this? And if so, is this a free upgrade if I have the extended 3 yr support?
    thx,
    Pandabig

    Xcode 4.x cannot be installed on Snow Leopard.  You need a 3.x.  So if that is what you used then yes, you need to install lion.   If connect.apple.com still alows registration or logins using an existing appleid then you could download the last xcode 3.2.6 for free.

  • "Problem with Trial - problem loading trial period for Adobe Photoshop CS3"

    Hello,
    I installed Photoshop CS3 Trial and whenever I run it and choose to begin my trial period I get the following error message:
    "Problem with Trial - problem loading trial period for Adobe Photoshop CS3".
    I tried uninstalling and reinstalling, and even ran the Adobe CS3Clean Script but nothing seems to help.
    I should note I never installed any earlier version of Photoshop on my system (I use a fresh copy of Windows XP with only a few programs installed).
    Any suggestions will be appreciated.
    Thanks,
    David

    i had the trial of photoshop on and the trial has run out my friend has given me a disk with adobe photoshop on and i cant do it beacause of the regestry code the photoshop puts in after the trial has ended to tell my pc that i cant have photoshop on my computer again :(:( now i have herd that you can remove the codes but it is quite hard well iam willing for this challenge and if anyone could help me i would reall welcome your help or if anybody has got the link to a tutorial to tell me hoe to do it i would aprecitae that to thank you all very much and post bak soon please

  • FM Transmitter used to work fine but stopped working, bought 2 new ones and neither work, they work with other Ipods in the house, IPOD Usb syncs fine with Computer, why won't it work with the FM transmitters anymore?

    FM Transmitter used to work fine but stopped working, bought 2 new ones and neither work, they work with other Ipods in the house, IPOD Usb syncs fine with Computer, why won't it work with the FM transmitters anymore?

    Are the other iPods models, same version as yours. The 2 New FM Tx may need a new iPod software, which you can update via iTunes.
    Good Luck!

  • Cropping tool does not function properly in Photoshop CS3

    Cropping tool does not function properly in Photoshop CS3. Always crops to .004" x .004". Tried reinstall with no luck. Any fixes out there?

    Reset the tool by right-clicking on the crop tool drop-down/fly-out menu in the top options bar (big crop tool icon above the tools panel, when the crop tool is selected). Be sure to check there aren't values in the crop tool by hitting the clear button in the options bar.

  • I just purchased an iPad 3 and it works great with most of my email accounts, but with an imap account from school it will download the content of the folders in the account, but doesn't download the messages in the inbox.

    Hi,
    I just purchased an iPad 3 and it works great with most of my email accounts, but with an imap account from school it will download the content of the folders in the account, but doesn't download the messages in the inbox. I have deleted and created the account several times. I have checked the status of the account and it's active and works either from safari or from my Mac or iPhone. I have turned off both my Mac and my iPhone as not to have competing devices, I can even send emails from the account successfully. It simply won't download the content of the inbox. Help!

    Hi Csound1, thanks. The email host is 1and1.co.uk, however, i am going to fess up and make myself look like a plonker now -
    the email account in question was set up in Outlook as POP - stupid, stupid, stupid me, wasted an afternoon on this!  I have now changed the Outlook account to IMAP and Mail.app works perfectly - and looks much nicer than Outlook did.  Im in the middle of converting from Windows to a Mac, and still finding my way around the Mac
    The lesson learned, never assume - always double  check!  All my other email addresses with 1and1 are all imap, except this one, and it happened to be the first one I set up in the Mail.app. (bows head in disgrace!)
    Thank you anyway for attempting to help me!
    Cheers

  • HT4557 Can I use Home Sharing with only another person's iPad but with out the other person's computer?

    Would like to share music with someone.  Currently the computer registered with the iPad is out of commission.  But since you can pretty much do everything on the iPad another computer was not purchased.  How can I utilize home sharing with out two computers?

    You don't.  Otherwise they would have called it Device sharing. 

  • IMoviemobile export to Camera Roll will not play with quicktime on PC (video plays but with black screen, audio ok)

    Videos created in iMovie on the new ipad will not play on PC with Quicktime after being exported to the Camera Roll and copied to the PC. Movie will play but with a black screen only. Audio ok. Was able to do before ios 6 but not now.

    I'm having the same problem. All of the movies I export out of iMovie since upgrading to the latest version show up with no video, only audio, in Quicktime. Ironically the video place just fine in Windows Media Player and also in iTunes.

  • Layered image with blending mode won't display properly in Indesign CS3

    Hello,
    I'm having trouble placing a layered psd and/or tiff with blending modes into my indesign cs3 document. Basically I have a flattened image with a shadow on a white background. I've had to doctor the image a bit in photoshop and I've used the multiply blending mode to remove the white background. (I'm trying to get around having to clip the image and having to recreate the shadow). Anyone know how I can drop my layered image into indesign and have it keep the blending modes I've applied in photoshop?
    Any help would be much appreciated.

    I'll try and do my best to describe what it is I'm doing.
    I've started out with a “flat” image of a product on a white background with a shadow on it. I need to make the background transparent and so that all I’m left with is the product with the shadow on a transparent background.I want to be able to place this image over another image in indesign and have the background remain transparent.
    On the first layer I have a clipped out version of the product with no background (All by itself with no background or shadow). On the second layer I have the original “flat” image with the shadow and white background. On this layer I’ve used the multiply blending mode to remove the white background.
    Now that I have the product on one layer by itself and the product and shadow on layer two with the multiply blending mode I have an image of the product with a shadow with no background. When I place this into indesign, my image shows up with the white background as if the multiply blending mode isn’t applied.
    I’ve tried this on other images. It doesn’t appear that it lets you bring an image over with that blending mode. It's like I'd have to bring over a clipped image and then place that on top of my original image with a blending mode placed on it "in" Indesign.
    Hope that make sense?

  • Can't install OSX 10.4 on this computer? But it used to run it fine!

    Help! I have been running 10.4 since it came out... loaded from the black retail box. Then, last week, my HD was corrupted...to the point it would no longer function. I have replaced it with a 100MB drive from OWC. Everything installed fine...except 10.4. It would not install from the original retail disks.
    I went back to the original 10.3.9 disks that came with the computer, and they loaded fine. I again tried to upgrade with the 10.4 disks, and same message!
    The CS3 apps I have been running for two months are now unusable... can anyone help?

    My message is the same as my subject: "can't install OS X 10.4 on this computer". No options, nothing.
    What gets me is that it was running OS 10.4 from day 1! Then the HD died...

  • Issue with LOV  .LOV window pops up but with session loss message

    Hi,
    I am facing one issue for LOVs.
    On a page when i enter any partial value for LOV then LOV window pops up but it gives me
    error message as
    "You cannot complete this task buz following events cause loss of page data
    ** Your login session has expired
    ** A system failure has occured
    I am not able to proceed ahead
    Thanks,
    Milind

    The applicationModule is oracle.apps.icx.por.rcv.server.ReceiveItemsAMImpl
    which choose the SQL of many view objects with search criteria the user filled, add search criteria and launch the SQL to display articles to receipt.
    I need to add search criteria with those are already in. So I don't see how I could make this differently.
    Moreover the page is in a train. So all pages of this train have the same root AM...
    Can't we change the root AM during execution in JAVA ?
    Regards
    Vincent

  • My macbook air screen is black, the screen won't respond but the sound and brightness works fine - any solutions?

    I treid letting it run flat, then charging it but it went back to the black screen. Sometimes the mouse icon can be seen and I can move it but it will vanish sometimes.

    Could be a problem with the LCD or it's cable, this seems like a hardware fault. I would go to the Apple store before its to late and before you run out of warranty (you get a 1 year warranty) There no way of fixing this without opening the computer which would void the warranty. If you have ran out of warranty i would go on eBay and look for a inverter, the cable or possibly the LCD apple would be able to tell you what it is without you having warranty and try the repair yourself or you could pay Apples overpriced repair.

  • My app work with HP34401A fw 1-1-1, but with 10-5-2,11-5-2 dosn't work. Why?

    I write applicotion,which communicate with HP34401A over GPIB,but customer has HP34401A with later firmware version and application dost work.

    hi,
    of course, customer use GPIB, and right address. I think,that some problem is in initialization module for HP34401A included in Labview 5.1.
    regards
    Tomas

  • How to copy a database with all the objects and relationship but with no data

    Hello Experts
    I am here for your advise as usual, I  want to create a copy of my current database from an existing one on SQL Server 2008r2 Standard Edition, here is what I need, I want all the objects including any relationship between the objects and I do
    not need any data. I have some idea for using the general script in SSMS, but I still need you expertise advise please, thank you kindly for your help.
    Regards

    One option is to run BACKUP/RESTORE, once you have restored you run:
    SELECT 'ALTER TABLE ' + quotename(s.name) + '.' + quotename(o.name) +
           ' DISABLE TRIGGER ALL '
    FROM   sys.schemas s
    JOIN   sys.objects o ON o.schema_id = s.schema_id
    WHERE  o.type = 'U'
      AND  EXISTS (SELECT *
                   FROM   sys.triggers tr
                   WHERE  tr.parent_id = o.object_id)
    Copy result and paste into a query window do to run. Next:
    SELECT 'DELETE ' + quotename(s.name) + '.' + quotename(o.name)
    FROM   sys.schemas s
    JOIN   sys.objects o ON o.schema_id = s.schema_id
    WHERE  o.type = 'U'
    Run this result until you don't get any more errors.
    Run the first query again, but change DISABLE to ENABLE.
    This is more long-winding than scripting, particularly if you have lots of data. But you know that you will not make any changes whatsoever to the schema.
    The scripting in SSMS generally does it right, I believe, but some items are not scripted by default. If you run BACKUP/RESTORE, you know that you get a faithful copy.
    Of course, the best way is to keep your code under version control and take the version control system as your ultimate truth.
    Erland Sommarskog, SQL Server MVP, [email protected]

  • On opening, the browser comes up with not an address navigation bar, but with only two google search windows. How can I make it open with an actual address line?

    It's all been said in the question.

    Make sure that you do not run Firefox in full screen mode (press F11 or Fn + F11 to toggle; Mac: command+Shift+F).<br />
    If you are in full screen mode then hover the mouse to the top to make the Navigation Toolbar and Tab bar appear.<br />
    You can click the Maximize button at the top right to leave full screen mode or right click empty space on a toolbar and use "Exit Full Screen Mode" or press F11.
    If the menu bar is hidden then press the F10 key or hold down the Alt key, that should make the menu bar appear.
    Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"

Maybe you are looking for