Xht file extension still requires manual configuration

to open the files with an xht extension with the File Panel, i needed to configure the following file:
/Users/me/Library/Application\ Support/Adobe/Dreamweaver\ CS5/en_US/Configuration/Extensions.txt
adding XHT after XHTML on the line for HTML documents enables Dr CS5 to open a file with an xht extension via the Files Panel.
maybe a future update will already include the xht extension as an HTML type of document.

Hi Ron,
as far as i know with regard to xht as a web standard, the xht file extension is used the same as the xhtml file extension (which is also my understanding for the use of htm and html).
w3c has a specific validator for XHTML 1.1 documents. there is a link from pages on my web site at http://www.enhanceability.com/0.xht (near bottom of the page).
i don't know how widespread support is for xht as XHTML (HTML) among the various browsers and apps and networks, however I can browse such pages with near lightning speed with Safari, Firefox, and some other browsers.
i just noticed that although Safari 5.0 renders an XHTML page with an xht file extension, when I try to save the page as page source it enforces the xhtml file extension, without allowing the xht file extension. (however i can rename with xht in the finder)
as far as Adobe Dreamweaver CS5, it seems that i needed to configure two files so that the FilesPanel could open a doc with an xht file extension, and also so that the code view of a document with an xht file extension also showed code highlighting.
Applications/Adobe Dreamweaver CS5/Configuration/DocumentTypes/MMDocumentTypes.xml
and
MyUser/Library/ApplicationSupport/Adobe/Dreamweaver CS5/en_US/Configuration/Extensions.txt
it was simple to add XHT after XHTML in the HTML documents lists, yet there must be a better way.
Yes, I am familiar with XHTML. I followed the link that you provided to here:
http://www.enhanceability.com/dev/0.xht
Which has a link to this page:
http://www.w3.org/MarkUp/2008/ED-xhtmlmime-20080618/
I think you have misinterpretted that information. I do not see anywhere on the W3C page that recommends using .xhtml or .xht file extensions.
I also found this FAQ that explains my understanding about XHTML documents:
http://www.webheadstart.org/xhtml/faq/index.html
Yes, it would be nice to have a UI to make adding file extensions to DW easier.
Regards,
Randy

Similar Messages

BDLS conversion require manual corrections

Hi, I am currently running BDLS in a system that is copied from BI Quality system. After the copy, I have run BDLS conversion for few source system connections. For the source system conversion from URD030 -> DV2CLNT030, I found that few tables require manual correction and ran BDLS on these tables as below, but still requires manual correction.
=======================================================================================
Log for conversion: URD030 -> DV2CLNT030 in system CND900 (initiator CND 900)
05/23/2008 16:05:32
< Table T000 was not relevant for conversion
Table Name Field Name Number of Relevant Entries Number of Converted Entries
/BIC/SYPRODHIER* LOGSYS 1 0 <<<<
RSISOSMAP* LOGSYS 1 0 <<<<
RSOSFIELDMAP* LOGSYS 1 0 <<<<
Identifies Cross-Client Tables
<<<< Error in field of table . Manual correction required.
< SAPoffice No object reference exists -> No conversion
< SAPoffice Object references that have been converted: 0
Table buffer in server synchronized after conversion
=======================================================================================
SQL Level Updation gives the following errors.
I tried to update the table manually from database level, but couldn't. Can you give some suggestions.
=======================================================================================
SQL> select count(*) from SAPBIW."/BIC/SYPRODHIER" where LOGSYS='URD030';
COUNT(*)
4047
SQL> update SAPBIW."/BIC/SYPRODHIER" set LOGSYS='DV2CLNT030' where LOGSYS='URD030';
update SAPBIW."/BIC/SYPRODHIER" set LOGSYS='DV2CLNT030' where LOGSYS='URD030'
ERROR at line 1:
ORA-00001: unique constraint (SAPBIW./BIC/SYPRODHIER~0) violated
=======================================================================================
Can somebody give me some suggestions on this?
Regards,
Giridhara Tadikonda

I am getting a similar error. Please assit.

I am trying to install an extension that requires FF 4.0. I downloaded 4.0 yet the extentsion says I still have 3.6.16 when trying to install.

I have uninstalled and reinstalled FF several times. When I try to install the extension (that requires FF 4.0), I get a pop-up that says I am still using an older version of FF and asks if I want to upgrade. When I click on "About Firefox", it says I have 4.0. In February, I downloaded FF Beta which I understand could be a problem. I also have read that you need to manually delete Beta files which I have done. I did a system search to see if any Beta files exist and no further files were found. I just want to make sure FF 4.0 is installed and be able to install the FGS extension.

Thank you, cor-el, for your reply. I clicked on the link you provided, and it took me to Create a New Article. I'm assuming an article already exists for this. Can you instruct me on how to view this article. This is the first time I have ever had to refer to Mozilla Help. I have tried to do this on my own, but am having difficulty. Thanks for your help.

CS5, checked "save file extensions as small case letters" but still capital, why?

hi,
i installed CS5 4 weeks ago, since this time, i never got a file extension in small case letters, only capital letters ( xxx.TIF ). why?
i checked it in preferences, see enclosed screenshot... i never had this problem in CS4.
it would be important for myself, when saving files, that alle extensions are small case letters, like xxx.psd or xxx.eps
usually i rename these extensions manually, cause i am uploading final images to PC servers, which
cant recognize capital letters, i presume....

no, i am still dealing with this problem on both macs,
mac pro mid 2010 2,8 quad (24GB RAM) and my mbp 15" i7 (4GB RAM)
where i installed Photoshop CS5.
on both macs, photoshop always saves files with capital letter file extensions (xxx.TIF or xxx.PSD)
thats very annoying, as i have to manually rename the file in the finder later.
and thats for all files i create.
i really wonder, could anyone from the adobe staff please comment if it is a bug
or anything else?
thanks!

Will files with hidden file extensions in Mac OS X still open automatically in the correct application on a windows PC?

I recently submitted some job applications that had word and PDF attachments. However, when I saved the files I unwittingly had the 'hide extension' box selected. Will these files still open automatically in the correct application on a PC? (ie are the file extensions just 'hidden' at my end or are they completely removed by selecting this option so as to cause problems when opening them on a PC?)
Thanks in advance.

Thanks, so having the 'hide extension' box checked when saving a new file for the first time won't save the file without an extension? (because I understand that Mac OS doesn't rely on the file extension but has other ways of knowing what the file is and what to open it with)
The reason I'm paranoid now is because one of the fields where I was uploading a file had a message to Mac users saying something like 'Mac users, be sure to save your file with an extension'. Surely this just happnes by default??

Proxy 4.04 : Manual configurations of .conf files not loading

Hello,
Apologies if i sound a bit noobish , but some questions regarding manually configuring files (*.conf) using notepad/vi.
Issue now is , whenever i use a script or manually copy & paste newer configs, i do not get prompted for the reload configuration prompt like in 3.6. While i do realize the software supports dynamic reconfiguration , but i noticed that there is no updates show in my admin server (e.g , updated templates in obj.conf but in admin server -> view templates , it's not showing). And no prompt to "load configuration files). I'm running java that came with the package itself btw.

Hello,
Apologies if i sound a bit noobish , but some questions regarding manually configuring files (*.conf) using notepad/vi.
Issue now is , whenever i use a script or manually copy & paste newer configs, i do not get prompted for the reload configuration prompt like in 3.6. While i do realize the software supports dynamic reconfiguration , but i noticed that there is no updates show in my admin server (e.g , updated templates in obj.conf but in admin server -> view templates , it's not showing). And no prompt to "load configuration files). I'm running java that came with the package itself btw.

How to configure file upload restriction by file extension?

Hi All,
I want to know if its possible to restrict the file upload for any file extensions in CM Repositories. For example, I want that the users can not upload .avi files. Can I configure that restriction?
Regards and Thanks,
Arnau Rovira

Hi,
> How can I create a repository service?
> It's like a web service?
No. A repository service is a standard pluggable service within the KM framework. Search for "repository service" on SDN for further details.
> can I copy the upload command
> from the actual repository service
The upload command is the upload command is the upload command. It is not bound to any repository service.
Yes, you can try to extract all implementation classes for the actual upload command and create a new one under a new namespace and modify the interesting parts after decompilation. But be warned: Your questions signal that you are a beginner in the KM framework, and the things described so far are more in the direction "hardcore development"...
Hope it helps nevertheless
Detlev

CS5 requires file extensions to open files?

I receieved some image files (jpegs) from a client. For whatever reason, they did not have any file extensions on the file name (no .jpg or .jpeg) They opened perfectly fine in Preview, but Photoshop just said:
Could not complete your request because Photoshop does not recognize this type of file
The funny thing is that, in the "Open..." dialog, Pshop displayed the preview image for the file.
Once I added a .jpg to the filename, Photoshop opened it without a problem. I don't remember Pshop being so dependent on file extensions in the past. It's been a long time since I had to deal with extensionless files, though. Is this normal behavior?

If the file type and extension don't match, there could be problems. Photoshop goes with the file type first (as specified by MacOS guidelines).
If the file has no type, and no extension - then Photoshop has nothing to go on. Preview does a "best guess".
(yes, Photoshop needs better guessing code, but it's not as easy as it sounds)

In firefox 4 RC, some addons installed suddenly disappear, but checking the profile, some of the missing addons related files are still here, how to make the addons back?

I use firefox 4 form beta 9 to RC (zh) now and there are also firefox 3.6 installed in computer. One day when I open Fx 4 RC, some (actually a lot but not all) of the adoons just disappear. When I check on about:addons page, some addons installed do not appear in the list.
The addons '''REMAINED''' including:
* addons I already used in Fx 3.6 (like webmail notifie , xmarks)
* ''addons only can use in Fx 4'' (like Open Web Apps for Firefox).
The addons '''DISAPPEARED''' including:
* addons I already used in Fx 3.6 (like yoono)
* '' addons installed when using Fx 4'' (like updatescanner, Thumbnail Zoom).
But when I check the profile(by Help > Troubleshooting Information>Open Containing Folder) , some (not sure is it all) of the missing addons related files are still here [lucky], so any one know how to make the missing addons back?
Some more details:
* This happened when i use RC for already a few days and keep on even i restart Fx and windows.
* The bookmarks, history, search engine and even themes and icon setting are still here. [ I only sync bookmarks but not history for both xmarks and firefox sync.]
* This addons are really '''disappeared''' but not disable only!
* This number of addons missed, as i remember, at least 30, should be more than that number bacause some of them are installed but in disable mode.
* I try to install back one of the addons - Stylish, the installed code are still here.
* It is nearly an impossible mission to install every missing addons again, as it really kill my time.

Delete the files extensions.* (extensions.rdf, extensions.cache, extensions.ini, extensions.sqlite) and compatibility.ini in the Firefox [[Profiles|profile folder]] to reset the extensions registry. New files will be created when required.
See "Corrupt extension files": http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
If you see disabled, not compatible, extensions in "Tools > Add-ons > Extensions" then click the Tools button at the left side of the Search Bar to do a compatibility check.

How can I process an xml/xsl file pair that require the Internet Explorer dom?

My personal navigation device (GPS) generates xml files that contain a record of where I have been, together with when I was there, how fast I was driving at the time, etc. taken at approx. 5 second intervals. This xml file has an xml-stylesheet with type="text/xsl" but that stylesheet is written to the Internet Explorer dom standard. The stylesheet interfaces with google maps to display a map that shows my path and it also displays tables of data including distances that are computed from latitude/longitude pairs. I can supply a small sample xml file and the xsl file as well if they are needed to diagnose my problem. I cannot find any browser other than Internet Explorer that handles these files satisfactorily. I prefer to process them from a Linux environment but with the Internet Explorer requirement I cannot do so. The browsers that I have tried and that have failed are Firefox, Opera, Konqueror, Chrome, Epiphany, Midori, Arora, and Links.
One line in the xls file in particular gives grief in the browsers like Firefox that at least attempt to do more than display the raw xml file:
xmlns:cymath="urn:smiletime-cybarber-net:math"
A comment in the xls file says this about the problem:
"Tested and currently only compatible with Internet Explorer version 6 or version 7 (as this script includes JScript functions called by XSL, msxsl:script extension is required; also, the produced XHTML document embeds javascript functions exploiting the IE DOM).
"In order to provide compatibility with Firefox, other than checking the compatibility of the IE DOM, the cymath:distCosineLaw function still needs to be ported."

You may get an answer, but it is not really the sort of subject covered by this forum, I suggest you try [http://forums.mozillazine.org/viewforum.php?f=49 Mozilazine] and if you solve the problem post back again.

Dreamweaver CC and Windows 8.1 - Can't Find A Valid Editor For This File Extension

Was running the latest version with no issues and then I loaded Office 2013 .. Now when I am in the remote site and try to double click on a .cfm file, I get a dialog box..Can't Find A Valid Editor For This File Extension..
I tried the support chat and they said Dreamweaver support was not available, try again later???
So I thought I would reinstall the CC version and now I can see the Dreamweaver icon next to the files but still ... can't open the file..
Any assistance would be appreciated?
Leo

The issue is only in Windows 8.x where when Dreamweaver CC is installed, it is not able to turn on the file type associations by default. The workaround for now is to manually add the extensions both within Windows and then within Dreamweaver CC itself.
Go to Control Panel > Programs > Default Programs > Set Your Default Programs and select Dreamweaver CC and then select 'Choose defaults for this program' and Select All or the extensions you want to open in Dreamweaver CC
Start Dreamweaver CC and go to Edit > Preferences > File Types/Editors and add '.cfm .cfc' to the extensions and then add C:\Program Files (x86)\Dreamweaver CC\Dreamweaver.exe then click on Apply and Close
That should be it.
James

IPhone photo/video library glitch - wrong file extensions, name shift, lost files etc [LONG story - sorry]

I have a 5s running 7.0.4. and my computer is running Windows 8.1.
We had a baby and my phone filled up fast with pictures and videos, so I decided to offload them onto my PC. I connected my phone to the usb port, and directly copied from the DCIM folder to my hard drive.
Something happened during the first attempt, and the process was interrupted. So I went into each of the sub folders, and selected all files, and started the copy process again. I told the computer to skip any existing files.
So all the file counts matched in each folder, and I figured it was safe to start deleting from my iPhone.
On my hard drive, I separated all the MOV files into my Videos folder. But in Windows Explorer, the thumbnail view showed several MOV files with no thumbnail - just the generic icon.
As I sorted my photos into various folders, I also noticed a lot of generic icons instead of thumbnails for the JPGs. I started to feel concerned that my files had become corrupt during the transfer. But then I noticed a PNG file that was a few hundred megabytes. This was odd, so I added the MOV extension to it. Sure enough, it was a video with the wrong extension.
I renamed every PNG and JPG file that had no thumbnail to add the MOV extension. Every one was a video with the wrong file extension.
Then I went to the video folder, and all the MOV files that had the generic icon were actually JPG files.
Well I was just happy to see that the files were not corrupt.
One more time before I deleted things from my iPhone, I did a spot check to see that the largest videos were on my hard drive. I found a few videos that were not copied over, despite the file counts having been accurate. So I copied the videos again, and compared file sizes and date/times when there was an overwrite prompt. Most were matches, but several were the same file name with different sizes and dates.
I didn't know what was going on, but I just wanted to get the files on my computer. So I renamed my local copy where there was a name collision, and copied the videos. I deleted the videos from my phone as I went along.
I felt pretty confident that I had all the files copied now, so I began mass deleting my photos.
I went to the Photos app on the phone, and watched the thousands of pictures disappear, and the glorious free space grow on my phone.
But wait... there was still 1 video in the Photos app. I thought I had gotten all the MOV files off the phone...
I have a photo info app installed, so I was able to see the file name of the video. I searched for that file name in the DCIM subfolders, but the folder that had that series of files (the IMG_3000-3999 files) listed the files with that particular video skipped. It was clearly still on my phone, because I could play it.
Then I noticed it was a 45 minute long video of my baby. About 5 GB. So I figured it must be due to the file size that it wasn't visible from explorer. (Can't explain why that would be, but M$ keeps changing crap too. I never freaking know what to expect from them either.)
After having deleted all the jpg, png and mov files from the DCIM folder, there were still about 26 files in my camera roll on the iPhone. And I could still view the video.
I decided I wasn't concerned about the photos, I just wanted to figure out how to get the video onto my computer.
So I selected all the photos in the photo app (skipping the 1 remaining video) and tapped the trash can.
Poof! One item remained, and it was one of the garbage photos. My video is GONE! ^#@*&#($^@Q&%( And no, I didn't fat-finger it. I was very careful to select the correct thumbnails.
Looking back, I know that I should have just started the entire file copy process from scratch when funny stuff started happening like mismatched file names. But I am a sleep-deprived new mom and just wasn't thinking clearly. It would be nice if I could have used my file/directory compare program to check the iPhone against my laptop, but it is not compatible with devices, only removable drives.
And no, I don't use iTunes. I stopped using iTunes years ago when it would randomly decide to delete contacts from my phone just because they didn't exist on my computer or some sh-- like that. I have always just manually synced all my stuff and have never had an issue like this. To say I am sad to lose that video is an understatement.
I googled "iPhone undelete" and "iPhone data recovery" and downloaded a trial for one of the likely candidates. It turned up a bunch of garbage, but not my video.
Anyways... I am wondering if anyone else has experienced this type of scenario? Has anybody identified what could cause this to happen? I would like to avoid this in the future. (I will avoid this type of loss, because I know now what I could have done differently to be more careful. But it would be nice if I didn't have to get all neurotic about checking 60GB of photos/videos side by side each time I copy them to my computer...)
I have seen other threads on the forum here regarding corrupted libraries and such, but I am not sure this is the same thing.
One suspicion I have is that it might have to do with the iPhoto app being installed on the phone. I can't articulate why I think that is worth considering. But when I looked at my Video folder, I ended up with many duplicate videos, and all the duplicated videos' file names were 2 numbers apart. As if all the file names got shifted at some point. Very strange.
Thanks for listening to my rant. If anybody has an idea, I am interested. If anybody else has lost precious memories due to this, we should talk. If it is a widespread problem, maybe we can all get together and pound down Apple's door?
As an aside: Why am I unable to select Apple Support Community to post this question to?

In my case number of weird things happen whenever I try to copy pictures/videos from my iPhone from direct USB...
1. JPG files are wrongly named as MOV and vice versa.
2. I copy only folders but in addition files with no extension are copied in the main folder, very strange.
3. Whenever I open one of the folders, strange icons like this () start appearing which cannot be copied even.
Unfortunately I used to delete a lot of files with wrong extensions in the past because I never new they could be fixed.
Apple should answer this!
Note: I am using Windows 8.1 and use a direct USB cable without iTunes to copy the media files directly from My Computer.

How to mass-reindex files with same name but different file extensions

(reposting cos I'm confused about if I posted in the proper place before. Please delete if it is a repost.)
So I'm on a remote workflow. I pick all the raw data and convert it in two quality standards, one on 'high' with full specifications and one on 'low' so I can send 2gb instead of 80gb of files through the internet for me to work remotely on, and to speed up the overall work rhythm because files are lighter. All I need to do is to work at my home with the low quality files, send it back to the client's computer after finished, re-index all files in their high resolution twins and we are good to go to finish the product with highest quality possible. But both high and low quality files need to be the same extension, that I picked .mp4 for it is the standard for pretty much anything.
The point is, if I want to go full mobile, I only have an old HP Pavillion notebook and I really need to work with a video codec that goes very easy on it. I can only think about some 16:9 DV format. But the point is, this format generates a different file extension than my .mp4 standard, and Premiere, to my knowledge, really can't reindex files using only the file name while ignoring the file extension. It really should. And I really need to know how.
We also need to consider Premiere versions that allow themselves to be installed at x32 processors. My desktop is x64 and I really have no problem to work on these standards, the problem is, in my notebook I really can't.
So, halp?

i want to say it was added in cs7, which requires subscription, so in that case might as well be using latest version 8. if you had to use an older version like cs5, you could still use h264 or low bitrate dnxhd/prores codecs inside a quicktime .mov file. that would allow you to have same file ext on both versions of files.

Why do the file extensions (.jpg .gif .png) no longer appear when I click on a previously saved image to use that image's file name (particularly important when saving a series of images using the same root name)?

I save a lot of images using firefox, often times from a large batch or series of images. It used to be that I would click on a previously saved image and the entire file name including the file extension (i.e. image_example.jpg) would appear in the "save as" line. Now when I click on a previously saved file, the file name appears without the file extension (i.e. image_example). Which means I have to manually type .jpg every time. For a large collection of images that I am hoping to use the same root file name and then add chronological numbers at the end, this has become incredibly frustrating, especially as it is a previously unnecessary task.
I am using a new Macbook Pro and maybe there's something Apple related to this...? It did not happen on my old PowerBook G4. I have file extensions turned on in System Preferences.
It should be noted that I have searched high and low and have even gone into the Apple Genius Bar where they were just confused as I was and of course ended by urging me to use Safari (shocker!) as it has all kinds of new extensions and bells and whistles. I seriously feel alone on an island with this dumb, hard to google problem. Thanks so much for any help anyone out there might have.
I mean: is this as simple as changing a setting in about:config?
Your assistance is greatly appreciated.

Thanks for your response Mylenium, however like I mentioned multiple times, I did change all of my trackpad/scrolling settings in system preferences. And if I wanted to use a normal mouse (or a tablet), I would've gotten an iMac instead of a MacBook Pro. I travel often and work all over the place, not always with access to a decently sized workspace that would be required for using a mouse or tablet.

Dreamweaver as custom editor for other file extensions

So, I'm working on a project that requires me to work on some
files with non-standard extensions. Namely, I have some text files
that have a .cm extension, and I have some code files which have no
extension at all. I am connecting to my file store via an FTP
"site" set up in Dreamweaver.
Under preferences->filetypes/editors, I set up ". .cm" for
those two cases, and had selected "Dreamweaver" as the primary
editor.
The files open just fine, and I'm able to edit and save them,
and when I do, the files get "PUT" back up to the FTP server as I
want. However, what I've noticed is that the first time I edit one
of those types of files, and save it, now, from then on in that
session of Dreamweaver, any time I de-focus the window and then
come back to it, the IDE initiates another PUT action of the files
in question, even if the files are unchanged.
However, if I go back into preferences, and remove the
"Dreamweaver" as the primary editor for those two extensions, and
leave that list blank, Dreamweaver still is able to open up the
files as I want, but this weirdness with FTP putting and the
window-focus goes away.
Anyone have any idea why?

This TechNote explains how to add file extensions to be
recognized by DW.
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_16410
Unfortunately, DW does not handle file with no file extension
very well.
HTH,
Randy
> So, I'm working on a project that requires me to work on
some files with
> non-standard extensions. Namely, I have some text files
that have a .cm
> extension, and I have some code files which have no
extension at all.

Xht file extension still requires manual configuration

Similar Messages

Maybe you are looking for