XHTML - code checking in BEx WAD

Hey experts,
does anyone of you know if it's possible, to switch off the code checking in the XHTML tab within the web application desinger? With this checking switch on, it is almost impossible to write coding directly.
Ty for your help,
Karsten

Tools -> Settings -> Error and trace options?

Similar Messages

XHTML code for a page break in PDF file exported from WAD

Hi All
I'm new to WAD and I have created a web template with several tables and charts
I'm exporting these to a PDF document but I need to put page breaks in as I want to put a table and a chart on each page
I'm not sure how to do this and was wondering if adding it to the XHTML code direct would do the trick but as I don't know XHTML code I'm not sure.
Any help would be appreciated
thanks in advance
Sandra

Hi Cook,
In my project I had same requirment. But I didn't find any solution for this.
I tried to implement the same using XHTML and java script aslo. but these are the functionality which we are using for web page formating not the not the formating of external output like PDF and Excel.
So if you find any solution, then please share with me also.
Thank You

How to create a dashboard using xhtml code in the spreadsheet

i have a 4.0 dashboard with xhtml code or parameters in the spreadsheet to drive the dashboard. I am tried to create a new dashboard by copying the code it did not work. i searched all the link nothing works. any idea?
The sample code in the embedded spreadsheet looks like the one listed below:
&BI_COMMAND_1-VARIABLE_VALUES-VARIABLE_VALUE_1-VARIABLE=
how to create this kind of code to bind your BEx query to the excel spreadsheet to run the dashboard.
Thanks
York

Hello Anirban,
As we can't change the layout of Smartfrm dynamically we have to fix it.
1. Just Create a table structure of 5 equal sized column.
2. Now create a structure in TYPES
    TYPES : BEGIN OF i_table,
                    FIELD1(15) type c,
                    FIELD2(15) type c,
                    FIELD3(15) type c,
                    FIELD4(15) type c,
                    FIELD5(15) type c,
                 END OF i_table.
3. Now create a table in "FORM INTERFACE"
4. Display the same in your smartforms.
Now in your Print program create the same table as above.
1. Now you can move the first 5 fields data from your dynamic internal table to the interface table.
2. You can add up a popup saying only first 5 fields can be displayed.
Note : if the field length is bigger then you have to use a variable to cut out only first 15 character to put it into the interface table.
Hope this hint helps you a bit to gather some knowledge for your requirement.
Cheers,
Suvendu

Advantages of using Bex WAD over Bex Query Designer?

Can anyone tell me the advantages of using Bex WAD over Bex Query Designer?

Hi Shiva,
WAD has many advantages when compared with Query Designer. few of those are
You can include Radio Buttons, Push Buttons, Check Boxs.....
You can include more than one report in one WAD Report
Completely u can make fancy as much as requried ....
Many graphs and chars are can be included .....
data from Views can be viewed
Many..many....

BEX WAD 7.0: Chart Takes Long Time to Display in Portal - Query runs FAST

I have a BEx WAD 7.0 template which contains 3 column charts (each with it's own seperate DataProvider/Query). When the page loads...two of the charts show up right away, but one of them takes almost a minute to display on the screen (I thought it was missing at first).
I ran all three queries in the BEx Query Analyzer (including the one for the chart that takes forever to load) and they all complete within 3 seconds of hitting "Execute." So I don't believe it is the query causing this issue.
The chart that doesn't show up right away does have more data to display than the other two...but I have queries/charts on other web templates that contain 3-times the data of this one and show up fine when executed in the portal.
Anyone else having this issue or have an idea on how I can optimize the WAD charts and/or find out what is causing this issue? Again...the query that fuels this chart completes its execution in about 3-4 seconds.
Thank you for your time and of course points will be assigned accordingly.
Kevin

Hi,
have you already checked how much time the IGS consumes when creating the charts?
Run TA SIGS and check the statistics values.
Regards, Kai

Bex WAD Documnets

Hi Experts,
Please tell me where can i find some study material on Bex & WAD.
Please do send me if any one is having some documents at [email protected]
Thanks
Arpit Agarwal

Hi Arpit,
check these links.. you will get more information on WAD...
Check these link's on Web application Desining:
Gothrough the how to guide "How to enhanace the standard web template" for step by step procedure with the screen shots.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/dc1d9990-0201-0010-16aa-db3c4eb8b642
Web Application Designer for Beginners
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/749a4622-0a01-0010-36bf-b6b30a2a3a22
http://service.sap.com/bi -> SAP BW InfoIndex -> Web Application Design (3.x)
http://help.sap.com/saphelp_nw04/helpdata/en/1a/456a3badc1b315e10000000a114084/frameset.htm
Have a look at these links
http://help.sap.com/saphelp_nw04/helpdata/en/1a/456a3badc1b315e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/47/d4fed1c60a9743ade3b4cf306d5d48/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/40/8b174082fe1961e10000000a155106/content.htm
and also.. i'm forwarding some docs also to ur mail.. check ur inbox..
regards
@jay

Difference between Bex Analyzer and Bex WAD

Hi Every one,
I am pretty new to SAP, and working on SAP BW Front end.
I am pretty aware of Bex Analyzer and also Browser, but i always have a doubt about Bex WAD.
In my present job i talk to the users and take the requirments and create queries in the Bex analyzer which i am comfortable doing it.
I also know all the features of Analyzer and created quries and also published it on web, and also created workbooks and inserting multiple quries in the workbook etc etc..
However i have zero knowledge on WAD and how it is useful to me, and as if now i haven't got any requirment from the client for me to create any report in WAD or do some thing in WAD.
I have gone through SAP SDN help etc but i am not understanding it at all.
So can any one explain me in a laymans terms what WAD is and how it will be useful to me?
and also if possible send me link which has got PDF screen shots of what WAD is?
Points is for sure.
Regards,
Ram

Raj,
Thanks for the reply, but i still did not get the understanding about WAD. i have studied the link which you sent me.
I am still not able to understand how it is helpful for people like me,
See i create my report in Query designer, and i can execute the query in Analyser. and if i want i can execute it in the Web from my query designer, and also i can create chart on the web if i want.And i can Broadcaste it in the Web.
and also if i want i can create it in the workbook and create chart in that work book.
Then what is the point of Web Application Designer (WAD).
See i have created the Query in Designer in Development say Sales report Query on the infoprovider for SD, now what should i do with it in WAD.
How can i get it in WAD, i went to start> all Programs>Bex> WAD and i logged in to development and a sereen opend. And from here what i can do, i mean how can i open my created query in WAD?
As you guys know i am new to SAP itself, but i dont see any advantage about WAD, i read all the articals and there i found that i can create Web Items, HTML etc etc, but i already have HTML, when i execute my query from the Designer i get it in Web Browser...
See my question is simple, i have a query which i have created in the Query Designer, now how can i get it to WAD and after getting it what can i do with it??
If any one has a screen shots of there pls send me.
And Sanjeev has sent me a PDF which i saw earlear and i done the same in my WAD but i am not about to get it to work.
I have given the points to every one but still what i need i did not get yet.
Regards,
Ram

How to Add a New Filter Value in BEx WAD to Display All Result

Hi experts,
I want to add a new filter value in BEx WAD to display all data records. The scenario is as follows:
The status field can have two values: Active ("A) and Inactive ("I").
But the requirement is to have a third value to display all the data records (Active + Inactive). E.g. the value can be "G". The purpose is to increase the understandability for report users.
Does anyone have an idea?
Regards,
Joon

Hi Vineet,
thanks for your reply. The problem is that there are only 2 values available for this Characteristic: "A" or "I".
The requirement is to have a third value "G" (instead of the default "All Value") due to historical reason, because all future report users have been working with R/3 reports for quite some time and they are accustomed to using "G" for displaying all values.
Is there any possibility to realize this?
Thanks,
Joon

Tax Jurisdiction Code Check as part of a Sales Order Partner Function

Hi,
I have a scenario where we modify partner information directly in the sales order. These partners are simple addresses and are not tax relevant. We have set them up as one-time customers. Every time when we modify the address information, Vertex kicks in and tries to match the address information (street, city and state) with a tax jurisdiction code. In our case the address information is high level (only city and state) which is not enough for Vertex. SAP issues then a blocking error message.
We try to find a way to ignore Vertex for these specific partners. In the documentation we have found a user exit, as well as a BADI, but our developpers were not able to make it work in the sales oder.
The user-exit is the following: EXIT_SAPLFYTX_USER_001
The BADI is the following: IF_EX_ADDRESS_SUBSCREEN
In EXIT_SAPLFYTX_USER_001, I've found a parameter (EXEMP_IND) which could enable to bypass the tax jurisdiction code check and the RFC call to Vertex.
In IF_EX_ADDRESS_SUBSCREEN, I've found a parameter (CHECK_ADDRESS) which could potentially bypass the check as well.
Did any of you already experience this scenario or would you have an idea about how I could make this work?
Thanks
Loic

Unfortunately, the sales order is created through an interface (using iDOCs), and the external system feeding the iDOC for the sales order creation does not have any Zip Code information. Besides, even if the Zip Code is entered, it is still not enough for Vertex to choose automatically a Tax Jurisdiction Code, most of the times, it is also requiring a District, which again, will not be passed from the interface.
We went through this analysis already and we came to the conclusion that we need to bypass this check, as this partner function is not tax relevant.
Thanks,
Loic
Edited by: Loic Dominik on Jun 27, 2011 7:39 PM

Change comma and period in key figure presentation in BEx WAD reports

Hi gurus
We run our BEx WAD reports in the SAP portal. By default the thousands separator is period and the decimal separator is comma. How can I change this so the period becomes the decimal separator and the comma becomes the thousands separator?
Kind regards
Erik

Hi Erik,
you can change this by setting at user parameters.
At system, at any screen (RSA1) -> menu SYSTEM- > USER PROFILE -> OWN DATA -> Defaults Tab, here you can change.
and Save.
these will reflect in WAD report output.
Best Regards.

I didnt konw how to make a new account for my iTues card so i did it with a diffrent email but that email doesnt exist and when i tried to make it on a real email i just sai invalid code check the code and try again and can u please help me

please help me it is a card of 25 dollars and i dont want it to go to waist i by mistake thought you used a frake email so i made one up i thought i was going to have a new one but then it said it was going to send a verifaction to my email so then i tried to use a real email and put in the code but it just kept on saying invalid code. check the code and try again. and i dont know what to do can u please please help me it was a gift and i really dont want it to go to waist please i need help

for #1
Frequently asked questions about Apple ID - Apple Support
I have multiple Apple IDs. Is there a way for me to merge them into a single Apple ID?
Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.
If you are wondering how using multiple Apple IDs relate to iCloud, see Apple IDs and iCloud.
for #2
Apple does not accept unsolicited ideas see Apple - Legal - Unsolicited Idea Submission Policy

" Active Company Code check in Controlling Area"

Hi All
while assinging the Real Time Integration variant to company code. Getting the following error as
" Active company code check in controlling area."
any one can plz suggest me.
Moderator: Please, search before posting

Hi Ashok,
Thanks for the response.
Here in my case, when I insert the Tcodes related to conrolling like(KO01,KO02,KO03 etc) in a role, then I dont find any authorization objects(bukrs) which is related to the company code in the authorization genaration area in PFCG. So there is no way I can maintain values in them.
Please suggest any alternate solution.
Thanks and Regards,
Abdul Khyoom A

Javascript:SAPBW in BEx WAD

Hello all,
My current task deals with geo-maps in SAP BW: When you click on a country on the map a new URL should be created and the country should be displayed in a new window using this URL-information. The URL requires the country abbreviation (such as DE for Germany). In the status line I can see javascript: SAPBW(4,,,DE) where DE is Germany. The system create the new window. However, the URL for this window is not what I require (you do not see the country in the window). So I want to override the URL-information with the one I need.
Question: How can I dynamically determine the country abbreviation in SAP BEx WAD with the help of Javascript? My intention is to use this to overide the existing URL in the new window.
Thanks a lot for any helpful comments!
Anna

is completed.

How to create dropdown box, radio button,check box in wad

Hi,
How to create dropdown box, radio button,check box in wad.
Thanks,
cheta.

Cheta,
This are all standard Web Items in the WAD. Drag them onto your template and then make the changes you need to them in their Properties.
Regards
Gill

How To Use PMD Code Checker in Jdeveloper 9

Hai
Please Any one tell me How To Use PMD Code Checker in Jdeveloper 9
Thanks

Timo
You Checking file with PMD in **Jdeveloper** possible in jdev 10.1.3
for the earlier versions you told me to use command prompt
that's why when iam checking my file with pmd the output is like the below:
D:\jdev9\OAF\jdevbin\jdev\lib\ext\pmd-bin-4.2.5\pmd-4.2.5\java14\bin>pmd D:/satyas/Test.java xml rulesets/unusedcode.xml -debug
In JDK 1.5 mode
Loaded rule UnusedPrivateMethod
Loaded rule UnusedPrivateField
Loaded rule UnusedFormalParameter
Loaded rule UnusedLocalVariable
Processing D:\satyas\Test.java
Could not find class Test, due to: java.lang.ClassNotFoundException: Test
<?xml version="1.0" encoding="UTF-8"?>
<pmd version="4.2.5" timestamp="2010-08-24T19:02:07.019">
<file name="D:\satyas\Test.java">
<violation beginline="5" endline="5" begincolumn="22" endcolumn="22" rule="UnusedLocalVariable" ruleset="Unused Code Rules" class=
"Test" method="main" variable="i" externalInfoUrl="http://pmd.sourceforge.net/rules/unusedcode.html#UnusedLocalVariable" priority=
"3">
Avoid unused local variables such as 'i'.
</violation>
<violation beginline="14" endline="14" begincolumn="23" endcolumn="32" rule="UnusedPrivateMethod" ruleset="Unused Code Rules" clas
s="Test" method="myMethod" externalInfoUrl="http://pmd.sourceforge.net/rules/unusedcode.html#UnusedPrivateMethod" priority="3">
Avoid unused private methods such as 'myMethod()'.
</violation>
</file>
</pmd>

XHTML - code checking in BEx WAD

Similar Messages

Maybe you are looking for