XI 2.0: HowTo connect Bus.-Systems with different Releases to XI (RFC-Ad.)

Hi,
can anybody help me solving this problem:
I have Business-Systems connected to XI by RFC-Adapter. Everything works fine. Now I want to upgrade some of these Business-Systems to a newer Release --> RFCs are changing! (For both Releases I have separate Developing-Systems)
Does the following work?
- Creating a new Product-Version
- Creating new Software-Component-Versions for the new Product-Version
- Creating Namespaces with the same names (as in the older Software-Component-Versions)
- Tools/Release-Takeover for every Software-Component
- Connecting Develop-System of the new Release to the new Software-Components (Interface-Import of RFCs)--> in the new Software-Components only new RFCs can be uploaded.
- Business-Systems with old Release keep connected with old Product-Version. Business-Systems with new Release are connected with new Product-Version.
Does it work? Is this the best approach or are there other possibilities?
Thanks in advance,
Max.

Hey
are u suppose to do an IDOC(R/3 system A)-Xi-IDOC(R/3 system B) scenario,of u have to collect IDOC's from both the R/3 systems and send it to a single file?
in any case u have to maintain separate Business system and logical system name for both R/3 systems
thanx
ahmad
Message was edited by:
Ahmad

Similar Messages

Perform Client import/export SCC8 with different release component between server

Dear All
Isn't possible to perform Client import/export SCC8 with different release component between server.?
Currently the condition of between two system as follows
Source Server : SAP ECC6.0, Component SAP_APPL, release 602 level 16
Target Server : SAP ECC6.0, Component SAP_APPL, release 600 level 24.
This problem happens due we was unable to downgrade the release and patch the latest support pack of SAP_APPL reelease 600.
Thank You, your help is much appreciated.

No..

Setup Central Contract Management SRM 7.01 with differing release versions

Hello experts,
OSS note 1268821 explains how to configure the central contract management between a SRM 7.0 and an ERP 6.04. So far so good, but how should it be handled if there are differing release versions such as ERP 6.04 and ERP 6.03? I guess that a technical split (xml services/ ALE distribution) is necessary?
Assuming that there are some backends with differing release versions and in some cases with differing master data (not supported by central master data client) would you always go via PI? Independent of release version, technology and master data.
Could you give some further detailed informations how to configure such a scenario? What has to be done to transfer existing contracts from an ERP 6.04 into SRM CM component (migration concept)?
Thanks!!!
KR Thorsten

Hi Thorsten
The minimal ECC version is 6.0 EHP4, Central Contracts require certain business functions in ECC to be activated and as these are included within ECC EHP4 you won't have these available in lower version. Therefore you won't be able to operate central contracts in such an ECC system.
You would either have to go with patching these systems or go with GOA's for these systems.
Operating central contracts via PI or SOA i believe provide almost similar functionality. SOA however requires an SRM EHP1 system and ECC EHP5 back-end to operate whilst central contracts configured via PI can be operated onwards from an SRM 7.0 and EHP4 system.
I can't help you on your migration issue, maybe someone else can.
Kind regards,
Tim

Connect to R/3 systems with different XI systems

Hi all,
I have the next scenario:
R/3 system A --> XI system A --> Other systems
R/3 system B --> XI system B --> Other systems
Both systems have different SLD system.
And I need create an IDOC interface between both R/3 systems.
Could somebody help me?
Can I send and IDOC to a XI system with only configure a RFC connection (SM59) or I need configure it in SLD?
Regards, Raú

Hey
are u suppose to do an IDOC(R/3 system A)-Xi-IDOC(R/3 system B) scenario,of u have to collect IDOC's from both the R/3 systems and send it to a single file?
in any case u have to maintain separate Business system and logical system name for both R/3 systems
thanx
ahmad
Message was edited by:
Ahmad

Dynamic CRM connect outlook Client with different domain

Hi Guys,
I had installed CRM 2011 in cloud with different domain.
If I use browser is working fine just that when i use Outlook client it show
15:24:16| Error| Exception : The request for security token could not be satisfied because authentication failed. at System.ServiceModel.Security.SecurityUtils.ThrowIfNegotiationFault(Message message, EndpointAddress target)
at System.ServiceModel.Security.SspiNegotiationTokenProvider.GetNextOutgoingMessageBody(Message incomingMessage, SspiNegotiationTokenProviderState sspiState)
I found that is because you must connect to the same domain.
any idea that i can use my Outlook client to connect to CRM 2011 without changing my domain?
Regards,
Kim

Yes - I've been scarred with this for many years :(
If it is just CAS 1 that is causing issues, then focus in on that. The support statement for Win 2008 R2 is that NLB is still a 3rd party component and support may ask for it to be disabled.
http://support.microsoft.com/kb/278431
Does CAS1 and CAS2 have the same NICs (firmware as well), driver, teaming software, and teaming config?
I also want to ask what the network team did for configuring the switch ports on the servers? This will vary from vendor to vendor - did they do the same config on both?
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.
Thanks Rhoderick, issue still persists
can you also help clarify what you meant by "configuring the switch ports on the servers"?
thanks again

WF-BATCH on different systems with different email adresses and also CUA

We have several SAP systems (1x ERP, 3x IS-U, 1x CRM, 1x HR, 1x SRM, etc.) and we have a CUA system for the administration of all users on these SAP systems. On the seperate SAP systems we have workflows active which all use user(s) WF-BATCH.
Now, we have the problem that emails are sent from the workflows by the WF-BATCH user(s). But on the HR system we want to sent the mail using HR @ company.com and from the ERP system we want to sent the mail using ERP @ company.com and from the IS-U system ISU1 @ company.com, etc.etc.
But all users are maintained from the CUA so we have 1 WF-BATCH user in CUA. The emailadress is also maintained in the CUA (so changing WF-BATCH in the different SAP system with SU01 is no option).
Does anyone have any experience with this and do you have tips how to solve this?

I had a previous similar experience and I had to go and change the user in every system (although the client had CUA). In my case, I actually had to create WF-BATCH manually in every single system.

Problem connecting CRM system with PI7.11

Hi,
Can anybody give solution to this problem. This is to do withe the connectivity between CRM 5.0 and PI7.11. We have been sucessful in connecting R/3 4.7 with PI7.11. But when try to check the SLD check from CRM server through the SLDCHECK command we get the following error:
Calling Function LCR_GET_OWN_BUSINESS_SYSTEM
Retrieving data from the SLD server......
No corresponding business system found
=> Check the SLD data content for the current system client.
Summary: Some non-fatal execption has occured, but connection to SLD works technically
=> Check and maintain the SLD data content.
Can anybody guide us to overcpme this problem as we are not able to connect the CRM system to PI7.11. All the RFC 's and HTTP destination are maintained properly and tested correctly.
Thanks
Regards
suk

Hi suk,
You need to create a business system in yuour CRM system w.r.t your R/3(BS<SID>) which shjould be same as the business system you created in PI system for R/3.
After creating the business system you try executing SLDCHEK...it works fine.
CHeers!!!
Naveen.

Connecting Mutiple Systems with XI

Dear All,
Today we want to do a scenario where we have to pick data from SAP R/3, APO and SQL Server and pthen put that data into some tables in MSAccess. Plz tell me what all we have to do in SLD, IR & ID to take data from all the servers and put in the MSAccess.
Also, plz tell about some weblogs for this.
reg,
nishu

Hiu Nishu,
/people/sravya.talanki2/blog/2005/08/17/outbound-idocs--work-around-using-party - Handling different partners for IDoc
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 - The same filename from a sender to a receiver file adapter-SSP14
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 - File to JDBCS
/people/alessandro.berta/blog/2005/10/04/save-time-with-generalized-jdbc-datatypes - JDBC DATATYPES
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1 - File to File Part 1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2 - File to File Part 2
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping - Any flat file to any Idoc
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] - File to Mail
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i - Dynamic File Name Part 1
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii - Dynamic File Name Part 2
regards
Mahesh.M

Does child systems with 3 clients need 3 RFCs?

Hello
One quick question
Does child system that has 3 clients need 3 RFC conenctions to connect to CUA?
We have ECC with 3 clients. When I go in one client SM59 and create RFC connection to CUA, everything is good.
When I go in SM59 of other client and I create RFC(same as logical name of CUA) , it says it already exist since I created in my previous client
Any thoughts? I know from CUA I would need 3 RFCs for the 3 clients but from the child do I need 3 RFCs? If yes, its not allowing.

Yes, normally the logical system name is used and having this the same as the RFC destination helps.
But this does name a type of "name space" implication...
Perhaps you want to consider where you have your master system and use client side security (the authorization group concept for S_RFC_ADM, and S_ICF type DEST to call them?
Even if you restrict RFC, it will always need to do that which is is designed to do. Client side security makes sense in cases such as CUA.
Cheers,
Julius

HT204406 I have multiple libraries - one on my work computer and one on my home computer. Can I connect both libraries (with different content) to itchTunes Ma without losing one or the other? I'd like to add what I have at work to what I have at home, et

I subscribed iTunes Match in the hopes that I could combine my two libraries remotely. Essentially I have two awesome collections of music, one at work and one at home. I wanted to be able to access my work tunes from my library at home, and vice versa if possible as well as from my iphone. Now that I've activated match on my work comp though, is it going to wipe out my library at home once I connect to match from my personal mac? I'm wondering if this will happen because when I associated my iphone with match, it told me it was going to replace my iphone music library with the match (work) library. I haven't associated my home computer library with it yet, because I'm worried it will wipe out the music I have there that isn't already in the cloud. How do I access what I've added to Match from my work computer, so that I can add it to my home computer, without losing what's already there?

when you open the app store scroll down to the bottom it will display the apple id currently in use, change it to your normal apple id email

DB Copy (MSSQL) between two SAP systems with different level and Components

Hi,
we have a SAP system release mysap 2004 SR1 and for "the upgrade project to SAP ECC 6.0 " we installed a new mysap 2004 in a new hardware (sap03) where we have also solution manager running. The new installed Mysap 2004 SR1 is alos running fine in the new hardware.
Now we would like to do DB copy from the old system (sap02) to the the new system sap03 and then we will do the upgrade to SAP ECC 6.0.
After I compared the two systems I have following questions:
1) there are 4 Software Components which are not in the new system (sap03). This are:
PI
FIN_BLERP
BP_INSTRASS
Is this necesary for the DB copy or we do not need this to be able to do the DB copy?
2) The Software Components Level is not the same. Should we have the same level to do the DB Copy?
Thanks in advance
Best regards
HanseAtik

Hi Juan, hi Clas,
just to be clear and to not stuck on the the way:
The systems are as follow:
1) the source system:
                     - Windows Server 2003,
                     - MSSQL Server 2005 with 32 bit.
                     - Mysap 2004 SR1
2) Target system:
                   - Windows Server 2003
                   - MSSQL Server 2005, with 64 bit.
                   - Mysap 2004 SR1 (with less Support package level and no PI, FIN_Basis, BP_BLERP and BP_INTASS coponents)
I hope this will work. could you post the link the DB Copy guide we are talking about?
By this way we will be sure that we are talking about the same DB Copy. Otherwise any mistake in this step will cost more work and time.
Thanks in advance
Best regards
HanseAtik

Can I copy between systems with different R/3 releases/add-ons?

hi,all
help me!

Notes 19574 and 24853 provide basic information about this. The main or basic release must always be identical. Support Packages and add-ons should also have the same status in both systems. Only then can the consistency of the data be guaranteed.
For instance, if an add-on is only installed in the source system, the remote copy will terminate with a reference to differences in the dictionary or missing tables in the analysis phase, and will not make the copy. The remote copy terminates if not all data can be copied, in other words if, for instance, a field is missing in the target system, a field is too small or a complete table is missing. You can include individual tables and, from Release WAS 6.10, also development packages (formerly development classes) in the source system in an exception list, to avoid the termination. See note 557132 for further information.
The export does not experience this problem with the transport because the target system is not checked during the export. On the other hand, differences in the dictionary or missing tables are subsequently reported as errors during the import but this does not result in any termination. All of the data that can be imported is imported. In this respect, different ADD-ONs would not pose a problem for the client transport. to what extent is the data consistent or useable?

How do I use firesync for the first time across 3 systems with different bookmarks? How do I combine initially?

If I have a need for firesync, it stands to reason that I have previously been using 2 systems. So my first step is to combine the 2 firefox profiles, but I do not see documentation for this

Duplicated.
https://support.mozilla.com/en-US/questions/853267

R/3 Systems with Different Dialogues

R/3(IDOC) to XI to Vendors
If my R/3 System is at Japan, XI and Vendors are in US . Whether the IDOC Adapter between the R/3 and XI is cabable of translating the information that is present in the two different systems?

Rohini,
Generally, if your systems are in different geographies, each geography will be having their own systems and landscapes. This is in many cases..
If you are combining this, then you should go for one Global SLD, where all systems are residing and making use of this from any geography...
And there are many other factors like data harmonization/consolidation etc will come into picture, i think that is different ..not required here
Regards,
Moorthy
Regards,
Moorthy

Can i do client export import between systems with different patch levels

we want to do a client export import between two systems. As I understand the patch levels should be the same in both for this to happen..
But right now I am in a situation where time is a big constrant. The basis patch level is on par. But the rest are not. Can I do client import successfully at this stage.

The only thing that may stop it working could be additional functionality between the systems.
I work on XI and there is a huge difference between SP12 and SP15. We were able to do the transports between systems, but as Dev was patched before QA, and the transport was reliant on standard settings not being available, it still went though, but we had to transport it again after applying SP15 to QA.
Again, it probably depends on what System you have running on Netweaver...

XI 2.0: HowTo connect Bus.-Systems with different Releases to XI (RFC-Ad.)

Similar Messages

Maybe you are looking for