XI 2.0 Inbound Queue Sysfail problem
I am having a problem where my xml message is causing the 'xbtoljul' inbound queue to stop. Within the queue I can see a message with the StatusText of "XI message queue stopped due to internal error". Does anyone have a good suggestion for understanding how or why this message is in this state? Looking at the message using 'sxi_monitor' it looks ok, no errors or exceptions.
I'm having the issue. Did you ever get this resolved
Similar Messages
-
Inbound-Queue SYSFAIL: SQL error in the database when accessing a table
Hi,
we send around 80 IDoc simultaneously, there 15 are stuck.
They all have SYSFAIL in SMQ2 with message: SQL error in the database when accessing a table
I already unlocked the queues and try to resend. Nothing happend!
I ran RSQIWKEX for the single queus but now there are new queues in Status SYSFAIL.
I already checked some entries in forum and blogs, but nothing worked out yet!
Can someone help?! it's urgent!!
brHi, well as mentioned i searched and found this already.
But in ST22 i got error concerning
Laufzeitfehler DBIF_RSQL_SQL_ERROR
Ausnahme CX_SY_OPEN_SQL_DB
So i guess it's something more serious.
Any more ideas?!
Can i simply delete the stucked queues and reporcess them?!
br -
Materials replication and R3PRODSTYP - SYSFAIL in inbound queues
Hi,
We are using SRM 7.0 and we have a problem in materials replication. In inbound queues we have the status SYSFAIL and the following error:
R3A* Error in Mapping (Details: transaction SMW01)
In SW01 the error messages are: u201CDownload inicial material: Table not supported by functionu201D and u201CCategory for material type MAT_Z001 does not existu201D
We did the initial download of DNL_CUST_PROD1 and the materialu2019s group corresponding to R3MATCLASS were replicated successfully. However 2 product subtype, corresponding to R3PRODSTYP, were not replicated.
Thus, the materials are not being replicated.
Do you have any ideas?
Thanks in advance,
Best regards,
ANWe already did the initial download of DNL_CUST_PROD0, DNL_CUST_PROD1, MATERIAL...
The problem is that there are two material types that at this time donu2019t exist in R/3 and when we do the material download those material types are trying to be replicated...
Any help?
Thanks!
Best Regards,
AN -
SYSFAIL error in Inbound Queue
Hi,
I got a SYSFAIL error in the Inbound queue. When I double clicked on it, it showed up the Status text as "An exception occurred that was not caught". This has been raised on 14-01-2009 (today's) date and when i checked for the B-Doc corresponding to this, i couldn't find out any entry for this.
Initially i tried unlocking the queue and thereby re-processing it, but it failed again.
The details are:
Function Module : BAPI_CRM_SAVE
Queue name : R3AD_SALESDO0004700954
Date : 14-01-2009.
Any pointers on this would be of great help.
Thanks in advance
Rasmi.1. Check in Tx: ST22 (ABAP Runtime Error). That would give you more insight in the cause of exception / dump and how to solve it.
2. Also, in parallel check whether the connection to ERP is established and the RFC call is getting connected (Tx: SM59).
3. If the error/exception/dump is occuring on ERP side, check whether CRM server details are maintained in table: CRMRFCPAR (on ERP side).
4. Check whether internal user exit is coded to catch the exception and throw out appropriate error.
5. check whether there is any code error in mapping module (available in table SMOFSUBTAB).
These steps might be useful to find out your problem.
Best Regards,
Pravin.. -
Problem Inbound Queue SMQR after execute BUPA_DEL
Good Day
Now, we developing a interface for a customer to import Business Partner (BP) from a non-SAP System in our SAP CRM 2007 System. To validate the functionality of the interface we would like to make any test imports. Well, if we finished an import we have to delete the BP's with the transaction BUPA_DEL. The deletion of the BP's in the table BUT000 seems to be ok.
So, when I call the transaction smqr to check the Inbound Queue CSA*, I will found an entry with the state "Retry" for every deleted dataset. I can manually execute the Queue successfully. What could be the reason for this state? How can I automate the execution of these queues?
Many thanks for your support!
Regards
MarcoDear Gerhard
Thank you for your answer.
Well, I had already implement the solution of the note 785046 without success.
The clue is, no Background-Job is scheduled but there are many thousend Entry's with the state RETRY in the Queue...
In the SysLog I couldn't found any messages they indicate to this "problem".
Do you have any idea's.
Can I manually schedule a Job (may be periodically) to process these Queues?
Thank's for your replies!
Best regards,
Marco -
Inbound Queue R3AD_SAL_ERR in Status SYSFAIL
Hi
In CRM 2007 i get this inbound queue R3AD_SAL_ERR in status SYSFAIL.
Could you please let me know why this error occurs and the steps to solve this error.
Regards
MasthanHi Masthan,
I hope the below mentioned notes will help you to some extent :
1372859
608332
Thanks and Regards,
Vignesh Ravikumar -
Hi Experts,
I have been monitoring the SAP SRM system and in the Inbound Queue (SMQ2) I find queues with entries ended with:
StatusText: Exception condition "GUID_FOR_LOGSYS_CHANGED"
This caused the queues to end with status: SYSFAIL.
Please guide me on this.
Thanks.
SudhakarHi,
Is it new system or copied client ?
Please check the GUID value in CRMMLSGUID-R3_GUID (SRM side) and CRMPRLS-R3_GUID (ERP side).
If you have some old value you can delete the record.
Regards,
Masa -
Hello Every1,
When I try to process the CIF inbound queue (APO system) it says the logical system is not found. But when I check in the table TRFCQIN and TRFCQSTATE the logical system has assigned properly. So please let me know how to rectify this.
Thanks,
Siva.Hello Chinni,
Master data cannot be reconciled using Delta Report. It is only for transaction data. If you are still having problem transferring inforecords - first check if the location product combinations used in the inforecord exist in APO.
Next follow these steps:
0. Make sure there are no error CIF queues inboudn to APO
1. Do you have an active integration model with the inforecord and still the procurement relationship is not created in APO? If so then exclude the particular inforecord (by document number) from the integration model.
2. Generate it and activate it.
3. Then generate the integration model again without the exclusion and activate this model. This will force sending the inforecord to APO.
4. See what is the error coming and send the details.
Thanks,
Somnath -
File to ABAP Proxy (problem with inbound queues in R3)
Hi,
In File-XI-ABAP proxy scenario, XI is successfully picking up file and sending it to R3.
But in R3, an inbound queue is created in SMQ2 transaction code and I solved the same to automatically process the Queue by registering that in SMQR transaction code. But even though the inbound queue doesn't appear in SMQ2 (which means that it is processed successfully) it doesn't call the method EXECUTE_ASYNCHRONOUS. Can anyone help me whether I need to do any settings to run that method?
Also can anyone help me, after the inbound queue is successfully processed in SMQ2 transaction, what would be the next step to watch what exactly that queue has done?Hi,
Please check the program code for Server ABAP proxy.
This will show you the trigerring of Proxy on inbound side.
ABAP Proxy inbound program - sales order creation - Community Profiles - Wiki
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2binbound%2bprogram%2b-%2bsales%2border%2bcreation
For Queues, you can go to SMQR and check for the register queue. Select and double click on it. If anything is stuck up then you can see in it. Even same with SMQ2
Thanks
swarup -
Inbound-Queue - Set Queue To Retry via Coding
Hello Experts,
I am just implementing a MEP-Scenario and facing a problem in timing.
Because of Missing Data delivered via RFC from other system i need to set an inbound-queue (R3AD...) to waiting and retry.
Is it possible to do this via coding?
When I fire an error message (type EAX) the queue gets in status "SYSFAIL" - but in this case it will not automatically retry again.
Any hints are appreciated.
Thanks
MarioHi ,
You can deregister the inbound queue R3AD* from SMQR tcode and the other way is You can write a program to start the inbound queue processing which has a status 'SYS-FAIL'.
Thank you,
Gangadhar.S -
Hi All,
I am replicating Product Listings (VB02 in ECC) data from ECC to CRM.
Now I need to Update a Z table in CRM System with the data coming from ECC when the Inbound Queue in CRM System is processed via SMQ2.
Can Anybody please tell me what BADI will be useful
I found one CRM_DATAEXCHG_BADI but not sure how it goes.
I also tried in Debuging the inbound Queue. It will take Long time to find out BTE or BADI in this way.
So please help me with the BADI or BTE Name.
Thanks
VenkatHi Gautham,
No good, It did not help me Gautham.
Can you please suggest me some other way of dong it.
I have 2 badis to use one is address_update and the other is addres_check.
I implemented address_check which had a address structure as a changing parameter and I update it there, it works absolutely fine.
But my requirement is to update the structure based on the condition of BUT000. That is the BUT000-type, which means I need to update the structure only for person and not for organization and group.
so in the badi address_check i need the BUT000 details, which I am not able to trace even from the local memory as I am getting the error saying "Memory is not yet instantiated"
and If i use the other badi address_update.
I have the problem the other way round here. I have all the BUT000 details here I can put the condition to update only for person, but I am not able to update the address structure.
Please help me. This is required very urgent.
Maximum points will be rewarded.
Thanks in advance.
Arul. -
Hi guys,
The inbound queues in the CRM are struck with the error showing
"Logical System is not defined in table SMOF_ERPSH"
when i checked the table SMOF_ERPSH in the the CRM there is an entry for the R/3 system and the CRM system
So I was not sure what the error is pointing to
RGDSHi Rajeet
The inbound queue has status 'SYSFAIL', and the system issues an error message stating that the logical system is not defined in table SMOF_ERPSH: There is no OLTP site for the logical system the data came from. Solution: Check your system settings: Is the transfer of data from this system to the CRM System supported? If yes: use the Administration Console (Transaction SMOEAC) to create a site for this R/3 System. Also check whether BDoc types must be subscribed on this site. In this context, refer to the Adapter Framework documentation and to the documentation on the administrations console.
Vaibhav -
Messages still stuck in the Inbound queue SMQ2
Hello XI Gurus,
All my messages with "READY" status are still stuck in the inbound queue (smq2) for the last 2 hours...there was no SYSFAIL error messages or scheduled background running. I have to manually go in and executed each of those messages, instead of automatically process it. Could someone please tell me how to troubleshoot this?
Thanks so much in advanced,
DngImplement SAP note 758677 for this. This exactly deals with your issue.
This Basically speaks about scheduling 'RSQIWKEX' for inbound and 'RSQOWKEX' for outbound queues.
Also, you need to set the parameter 'QRFC_Restart_ALLOWED' to '1' in the transaction 'SXMB_ADM' -> Integration engine. Its in the runtime dropdown menu.
Note : without this parameter being set this will not work.
Thanks,
Karthik
Edited by: Karthik Rangaraju on Oct 1, 2008 2:13 PM -
Queue with error in Inbound Queue SMQ2 can not de deleted
Hello,
We did the replication of Materials and Services correctly.
However, in the SMQ2 trx. (inbound Queue in SRM 5), we keep seeing the following queues:
R3AD_ATTRIBUTE
R3AD_CONDITIONS
R3AD_LEDELIVERY
R3AD_OBJCL
These queue have status "SYSFAIL". We want to get rid of these queues but upon deleting them, they keep appearing again the folowing day!
How do we have to proceed?
Thanks for any reply.
AartThanks Dean but it did not work.
The queue´s keep coming back.
The message of the SYSFAIL is now:
SR053 - No mapping function module entered in SMOFSUBTAB
Any clues?
Thanks,
Aart -
Messages in inbound queue in status-RUNNING and it is too slow
Hi Experts,
We have a issue there are tons of messages in inbound queue in status-RUNNING and it is too slow!, hence there are more messages getting in the queue every minute.
This is Production enviorment.
We have priority queues
QIN is waiting status.
De-register will not work due to loss of messages fear
Please advice
thanks and regards,
krushiHi,
If the queues are hanging due to peak load at sometimes
you can schedule following reports to restart them automatically
(dont have to lock and unlock manually)
RSQIWKEX - Inbound Queues
RSQOWKEX- Outbound Queues
Also you can save the first entry of the queue if its causing problems to process later- smq3
thanks
francis
Maybe you are looking for
-
How do I change an existing pages document to landscape from portrait?
I have a Pages document that I built in a vertical (portrait) orientation. Is there a way to change it to landscape after it is complete? I don't want to start over because it's is 8 pages long and includes images and text. I understand I will need t
-
I just downloaded an update Mac OS X 10.6.8 and everything got smaller; how do I enlargen it back to what it was?
-
Sending Mail with HUF / JPY currency in Workflow
Hi Friends , I have the below requirement . I have to send PO for approval throug Workflow . I am using " SO_NEW_DOCUMENT_SEND_API1" inside one method to send mail through Workflow . My Requirement - For JPY / HUF currency PO , Price of PO has to b
-
How to add custom field in Documents Tab of PO Header ?
Dear SRM Friends, This is a challenging task as an ABAPer to confront to.. We are in the midst of a requirement where we have to add a custom field in the PO Header. But the requirement is to add the field in Documents Tab in PO Header Data as fo
-
IPhoto 08 - Editing Event Titles
Okay I consider myself rather computer savvy but i'm beginning to think my new iPhoto 08 simply has a bug. I keep trying to edit the titles for events, I click on them and the title loads into a text bar and even has the cursor used to highlight/writ