XI 3.0 E-Filing GB R/3 RFC configuration to XI

Hi
Please could anyone advise me on the following. I am currently in the process of implementing E-Filing GB in XI 3.0 and I am stuck on what the RFC configuration should be in the R/3 Business System for the XI 3.0 configuration of E-Filing . I have referred to the blog [/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies |/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies ] and I want to confirm whether the PI 7.1 RFC configuration in the R/3 system would be the same for XI 3.0 as there is no clear SAP documentation about this. We had previously been using Business Connector for E-Filing.
Many Thanks
Rosie

Yes in PI 7.1 also the same is applicable.
As mentioned in blog -
Create RFC destination (TCP/IP) LCRSAPRFC and SAPSLDAPI for the SLD connection in R/3.
Same all settings u do.

Similar Messages

How to test E- filing GB scenario with live server.

Hi,
XI ver: 7
E-Filing ver: 1.0, patch 10
I am trying to configure e-filing for GB based on the configuration guide. After importing the latest XI content for E-Filing and HR, I have configured the outbound and inbound interfaces in ID. After completing all steps as per config. guide i am able to see all the objects in ID except communication channels..
You can find the screenshots in below link.
http://docs.google.com/Doc?id=ddmc8m97_1hm2jxg
How can i test this scenario..?
Do i need to test by connecting inland revenue live server and test server ?
Please help me in this...Thank you.
Regards,
Naveen

Hi Naveen ,
Please let me know what are all the pre requisites for implementing E-filing in / out bound interfaces .
I have SAP user guide for E- filing . Please provide me if you have any document which can guide me if any steps are missing in this setup.
mail me at [email protected]
Thanks in advance
Reddy

Profit center in Customer Line item display FBL5N

Hi All,
when we post to the customer, at the customer line item we cant enter any profit center (as there is no field to input). But at the postig to GL (line item 2) we have the profit center to key in .
But when using the standard report FBL1N, we have the field Profit center In the change layout.... Why is this provided. Does when we post to the GL line item with profit center , is it copied to the filed ?
Is there any configuration missing or need to be done.
Please advise .........
Best Regards
st

Hi ,
When you use PCA the idea is to capture revenues and profits on P&L accounts and by assigning some balance sheet accounts in config.
subsequently for AR and AP accounts you do the periodic transfer and that is when you assign the Profit Center based on the ofsetting entry.
As per SAP you cannot have a profit center at that point of time since a billing document can have multiple lines/multiple profit centers where as on line to the vendor/customer.
Let me know if you need further explanation.
Thanks,
Praveen

How to make fields mandatory in Message Address for Custom Notification.

Hi Experts,
We have created a new custom Notification Type and we were in the process of configuring it. I want to know, if I want to make a few fields obligatory in Message Address, can that be achieved through configurations. I am basically an ABAPer so please pardon my ignorance if the question looks basic.
In our implementation, I have seen different Work Orders with different mandatory fields in Message Addresses. I hope the same is achievable for notification as well.
Thanks for your help.
Regards,
Subhrangsu

There are 2 ways to make any Notification filed mandatory.
1. Configuration route:
Here Under Plant Maintenance->Maintenance and Service Processing>Maintenance & Service Notifications>Notification Creation>Notification types> Set Field selection for Notifications:
You select influencing button and your notification type then select the Radio button under Required column (against the
field you want to make mandatory)
2. User Exit Route: Through SMOD -->User Exit QQMA0014 -->Cutsomer Exit EXIT_SAPMIWO0_020 -->Include ZXQQMU20.
Then put your code in this include.
Code Sample:
IF I_VIQMEL-QMART= 'AC'.
IF T_VIQMSM-MNGRP IS INITIAL.
MESSAGE ID 'IW' TYPE 'I' NUMBER 464 WITH 'Tasks'.
RAISE EXIT_FROM_SAVE.
ENDIF.
ENDIF.
(The above Code makes the 'Tasks' filling mandatory in the Notification type 'AC')
Hope this answers your query.
Regards
Jogeswara Rao
Edited by: K Jogeswara Rao on Oct 8, 2010 9:21 AM

Upgrading gtk2 (2.24.10-3 = 2.24.11-1) breaks TrueCrypt.

After upgrading gtk2 from 2.24.10-3 to 2.24.11-1 TrueCrypt doesn't work any more. After downgrading to gtk2 2.24.10-3 it works fine agаin. I'm using OpenBox.

DullOnion wrote:I'm experiencing the same issue in other gtk2 apps (snes9x-gtk, gvbam) with gtk2 2.24.11-2. In both cases, attempting to set a default directory using the preferences menu sets the option as the home directory regardless of what was chosen. Additionally, I've noticed that the directory selected shows up in the recently open filed list. Manually editing configuration files works temporarily but the changes are overwritten as soon as the applications are restarted.
please report this issue to bugzilla.gnome.org, describing when the bug appeared etc.

Did you know that Google toolbar doesn't work properly in FF rc1? I have filed a bug report to Google about this

The Google toolbar doesn't recognize a left mouse click when selecting a 'suggestion'. It's OK using the keyboard, however. I have filed a bug report with Google, but as this is an important extension thought you should know.

See also: http://forums.adobe.com/message/4662367#4662367
-Noel

Not able to retrieve and insert the value to Home_country filed in MDM

Hi All,
I am new to the JAVA API,
I have creted one application in webdynpro using the JAVA API. I am able to search the data based on "Firstname" "Lastname" and "Email address".
I need to basically two functionalities
1) Search
2) Insertion of new records
*1) Search*__
But searching based on the Country is not able to do it.
we have two tables .
1) Country table> Contains all the list of the country codes and County name.
2) People table > Contains the country filed. So for this filed lookup table is country. also this country filed is drop down not have opton edit in the MDM.
I am sending the following used for searching the records based on the First Name and country.
But based on the first name it is working fine but Country it is giving some code like "R100" "R12". It is not givng the actual name of the country.
FieldSearchDimension sd1 = new FieldSearchDimension(fields[2].getId());
               TextSearchConstraint sc1 = new TextSearchConstraint(First_Name,TextSearchConstraint.EQUALS);
               sch.addSearchItem(sd1,sc1);
FieldSearchDimension sd4 = new FieldSearchDimension(fields[9].getId());
               TextSearchConstraint sc4 = new TextSearchConstraint(Home_Country,TextSearchConstraint.EQUALS);
//               TextSearchConstraint sc4 = new TextSearchConstraint("IN",TextSearchConstraint.EQUALS);
               sch.addSearchItem(sd4,sc4);
cmd = new RetrieveLimitedRecordsCommand(connections);
               cmd.setResultDefinition(rdPeople);
               cmd.setSearch(sch);
               cmd.setSession(sessionId);
try
                    cmd.execute();
                    catch(CommandException e)
                         e.printStackTrace();
                    recs = cmd.getRecords();
                    wdContext.nodeResult_Table().invalidate();
//retreiving the Data from the resultset
if(recs.getCount()!=0)
for(int i=0;i<recs.getCount();i++)
       //First Name
     IResult_TableElement resEle=wdContext.nodeResult_Table().createResult_TableElement();
     if(!(recs.getRecord(i).getFieldValue(fields[0].getId()).isNull()))
     //wdComponentAPI.getMessageManager().reportSuccess("Network Id-->"+recs.getRecord(i).getFieldValue(fields[0].getId()).toString());
     resEle.setNetwork_ID(recs.getRecord(i).getFieldValue(fields[0].getId()).toString());
       //Country
      if(!(recs.getRecord(i).getFieldValue(fields[9].getId()).isNull()))
     resEle.setDisplay_Name(recs.getRecord(i).getFieldValue(fields[9].getId()).toString());
     wdContext.nodeResult_Table().addElement(i,resEle);
By the above field is not giving the respective country name is avilable. it is giving some value"R100" rather giving of India.
_ 2) For creating the record in the "people" table._
I am able to insert the data all the information "firstname" "Last name", "email" except "Country" entered by the user by using the following code.
//Insert
First_Name=wdContext.currentPersonal_DetailsElement().getAttributeAsText("First_Name");
     Last_Name=wdContext.currentPersonal_DetailsElement().getAttributeAsText("Last_Name");
     Middle_Name_or_Initial=wdContext.currentPersonal_DetailsElement().getAttributeAsText("Middle_Name_or_Initial");
     Home_Country=wdContext.currentPersonal_DetailsElement().getAttributeAsText("Home_Country");
CreateRecordCommand createRecordCommand =new CreateRecordCommand(connections);
     Record r1 = RecordFactory.createEmptyRecord(tables[0].getId());
     try
//               Retrieve Lookup Field Properties, when Field Properties is given as input.
//           LookupFieldProperties lookupField = (LookupFieldProperties) fields[9];
////     Retrieve Lookup Field Properties, when Field Properties is given as input.
//           LookupFieldProperties lookupFieldSer = (LookupFieldProperties) fieldProp;
//          //setting the values for firstname and lastname
        r1.setFieldValue(fields[0].getId(),new StringValue(Network_ID));
        r1.setFieldValue(fields[2].getId(),new StringValue(First_Name));
        r1.setFieldValue(fields[3].getId(),new StringValue(Last_Name));
r1.serFieldValue(FieldValue(fields[9].getId(), new Stringvalue(Home_country));
        createRecordCommand.setSession(sessionId);
        createRecordCommand.setRecord(r1);
     try {
          createRecordCommand.execute();
      } catch (CommandException e2) {
Let me know what are the changes need to be done for inserting the country information in people table.

Hi Greg,
Thanks for the reply,
Actually,I was doing the same thing what you suggested. I am sending the piece of code . Can look it it .Is any thing wrong.
          //inserting the Country lookup filed to record object.
*       if(Home_Country.length()!=0)*
*     /when pass the int position number for the country by retreiving from the country table it is working fine. But we      cannot depend on position. Because People table internally refering the other db table while inserting the country      filed in the People table./     *
*          r1.setFieldValue(fields[9].getId(),new LookupValue(new RecordId(12)));*
*     //When i PAss the String to the following function i am getting the unsupportedFormat Exception          *
*          r1.setFieldValue(fields[9].getId(),new LookupValue(new RecordId("Australia")));*
InCountry . They have defined only two columns called.
1) ISO-2 Code
2) Country Name.
Sample data
ISO-2 Code |   Country Name
US                    United StatesOf America
AU                    Australia
Ar                     Argentina
Like the above data we have 250 country names
So , I displaying all the country list in my interface and holding in the Array.
Ex: When the user chooses the Australia. When I pass directly as an "Australia" to
r1.setFieldValue(fields[9].getId(),new LookupValue(new RecordId("Australia"))). it is giving me error.
Then i try to pass the postion of the"Australia" in country table. Like if the Austrila is an 2 record. I am looping through my array and find the record position as "2".
I am passing as
r1.setFieldValue(fields[9].getId(),new LookupValue(new RecordId(2)));
It is inserting into the people database. But not an Australia. It is inserting as "Argentina".
When the record inserting in people table refering some table at the database level , that table called "A2i_16_TEXT" This contains three columns.
A2i_16_TEXT(columns)
1) Id
2) LangId
2) Field Id
4) TextField
Example Data
Id | LangId | Textfield
3       0            Australia
2       0            Argentina
4       0            United States Of America
As i am showing the above table for "Argentina" Id is "2". When i pass the 2 for inserting the country filed.Instead of inserting "Australia". It is inserting the "Argentina" by refering this table.
Through MDM API we are not able to access this " A2i_16_TEXT" table. Because it is maintaining at the db level to find the perticular id for the respective country before inserting in to the people table.
So kindly suggest me how to solve this problem. What i am doing in the code is correct or not.
Regards
Vijay

Can not change user filed in CR Viewer

I am using Crystal Reports 2011 and i created a user field. i opened the report in CR viewer 2008 and the change filed is greyed out and the user can not change the field. I have tried saving the report with out a date saved in the report to see if viewer will prompt for a date but the report will not let me take it out now that it is set. i have checked options on the filed and it is set to editable. Is there something i am over looking? How can i get the user fields to work in crystal reports viewer?

thanks for helping.
viewer 2008 is the only thing i can find right now, i thought that might be the problem but i can not find a 2011 to download so i assumed they dont have it available yet.
the report does work in CR2011 but we can not get CR for everyone, and they are not going to use it, they only need viewer if it will work.
the parameter is a date field based off a database field.
thanks.
angel

Dynamic Sorting on Multiple filed in Crystal report 2008

Hi
I am using Crystal report 2008 sp3 full build with hotfix 3.3 along with ASP.NET 2.0
I have implimented the multi filed sorting using the record sort export and setting the sort order in the report designer.
Now my requirement is such that i would like to have dynamic sorting on multiple fileds while report is displayed in the UI.
Means suppose i have a report with Customer region,name,city,rating,status etc.
Now by using the sort control i would like to have the functionality in such a way that if user
a) first sorts on the region then the records should be first sorted by region
b) then sorts on the city then the records should be sorted first by region then by city
c) now sorts on the rating then the records should be sorted first by region ,second by city and then by rating
Now other user may do
a) first sorts on the rating then the records should be first sorted by rating
b) then sorts on the status then the records should be sorted first by rating then by status
c) now user sorts on the region then the records should be sorted first by rating,second by status and then by region
and so on the sorting criteria changes from user to user through the UI.
Is there any way to achieve the dynamic kind of sorting with Crytsal report 2008 where we can set the order of the fileds at sorting in UI dynamically .The sorting order of the fields are not known at the time of design of the report and its completely depends on the user's need.
Please let me know if you require any information on the same.
Regards,
smitha

Hello,
   Good Day!
   Thanks for your answer.
   Could you please explain me in detail how to achieve this functionality?
   Do i need to create a static parameter?
   I get my data set through the command option in crystal report.So i think i need to go by formula in the report.
   i am just putting down the steps to follow.Please correct me if i am wrong.
step1 :Create s static parameter with the name SORT.
step2: create the formula as you have mentioned like
    (IF {?Sort}='Vendor Number' THEN {Pr_Voucher_Status;1.Vendor_Key}& " "& {Pr_Voucher_Status;1.ap_remt_key}
    & " " & {@date}
   else
    IF {?Sort}='Invoice Number' THEN {Pr_Voucher_Status;1.ap_vchr_invno}& " " & {Pr_Voucher_Status;1.Vendor_Key}&
    " " &{@date}
   else
   IF {?Sort}='Invoice Amount' THEN {Pr_Voucher_Status;1.ap_vchr_amtc}& " " & {Pr_Voucher_Status;1.Vendor_Key}&
     " " &{@date})
    I could not understand what this formula is really doing .
    Could you please tell me what the following names indicates? :
              Pr_Voucher_Status :- Table/Command name ??
              Vendor Number,Invoice Number etc.. :- ??
             Vendor_Key,ap_vchr_invno,ap_vchr_amtc .. :- Filed names ??
             use of 1.{} :- ??
step3: place the below formula in the page header to display the sort order
    (if {?SORT}='Vendor Number' then "Vendor Number, Remit To, Invoice Date"
          else if {?SORT}='Invoice Number' then "Invoice Number, Vendor Number, Invoice Date"
          else if {?SORT}='Invoice Amount' then "Invoice Amount, Vendor Number, Invoice Date") .
Note:-My report does not have grouping.Do i need to have grouping?
in this case how the sort control will work ?
As i have mentioned in the first post the order of sorting is completely depends on the user's perspective .
The report is used by the whole organization ..
i mean the people with different roles like Manger,Team leads,modul leads,developers ,testers etc..
the usage of report varies according to the roles so the sort order also.
Regards,
smitha.
Edited by: smitha thomas on Mar 16, 2011 5:01 AM

URGENT HELP REQUIRED - E-filing for GB - IMG CONFIG

Hi
We are on ECC 6.0 and have just installed XI. I am trying to complete the SAP IMG Config, however there is limited documentation about this, particularly the constants and e-mail content.
Does anyone have any useful (ideally step by step) documentation on how to complete the customisation?
Your URGENT assistance is greatly appreciated.
Thanks
Michelle

Hi refer theses links
http://help.sap.com/saphelp_erp2005/helpdata/en/cd/5a0641f753f523e10000000a155106/frameset.htm
EOY2007 GB (E-Filing)

Difference between -1 and null in the targettype filed

Hi
Could anyone advise what is the difference between -1 and null in the targettype filed in marketing documents?
For example, in Sales Quotation - Rows (QUT1) table, I found for some open sales quotations, the field is null however the DB help file suggest the default value is -1 so I suppose it should be -1 for open documents.
Many thanks for your advisory.

Hi, Qian!
I investigated that "-1" value appears in targettype field in Sales Quotation Rows (QUT1 table) when you Dublicate a Sales Quotation document (Ctrl + D). And NULL value appears when you create a new document without dublicating.
In case you want to equal these 2 "empty"-values using T-SQL, you can use ISNULL(targettype, -1) function - this will give you -1 for both the "empty"-values
HTH!
Message was edited by: Aleksey Kuznetsov

Info package ABAP Routine to populate date from and To filed

Hello Experts,
I have requirement to populate the From and To dates with the: T-1 to T (Current Date u2013 1 to Current Run Date aka Sy-Datum) at info package level.I have written a code for this but see that From filed is not getting populated but TO filed is filled with current date.Can someone please tell me wats wrongwith my code?It is a delta info pacakage.
data: l_idx like sy-tabix.
read table l_t_range with key
     fieldname = 'CPUDT'.
l_idx = sy-tabix.
l_t_range-sign = 'I'.
l_t_range-option = 'BT'.
l_t_range-low = sy-datum - 1.
l_t_range-High = sy-datum.
modify l_t_range index l_idx.
p_subrc = 0.
Thanks,

Was able to tackle this using the following code.
data: l_idx like sy-tabix.
data: V_date type sy-datum.
v_date = sy-datum - 1.
read table l_t_range with key
     fieldname = 'CPUDT'.
l_idx = sy-tabix.
l_t_range-sign = 'I'.
l_t_range-option = 'BT'.
l_t_range-low = v_date.
   l_t_range-High = sy-datum.
modify l_t_range index l_idx.
p_subrc = 0.
Thanks,
I am closing this thread

Copy values from a filed to another in different blocks in same table

Hi All,
How to copy value from a filed to another field in different blocks in same form ?
example if i change value in Field A of block 1 it should reflect in Field B block 2 and again if i change in Field B block 2 it should reflect in Field A of block 1.
values will change twice or thrice then it will not change. It is happening like that.
how to do this ?
Regards

Same table / different blocks
I guess, both blocks will be marked for update, and when your user presses commit, the same table will be updated twice!
Are you sure that this is what you want to do? Is the same record current in both blocks? If so, you better use 1 block (it can be spread over several canvases and windows) and synchronize the items with the "synchronize item" property.
Anyway: If you can't apply the synchronize-property bcos the items are in different blocks, you can synchronize with 2 when-validate-item triggers.
Wolfram

How I got my L7780 Direct Digital Filing to work on MacBook Leopard 10.5.6

My situation was that I had miraculously been able to get Direct Digital Filing working once, but couldn't remember the exact steps I made to get it to work. I then had to clean reinstall my MacBook. And even when I put the exact path name that I had used originally in the web server for the printer (EWS?) and had set the network settings the same way I had originally. I was unable to get DDF to work.
I was able to set up the L7780 wirelessly. I was able to print and scan from my MacBook wirelessly. BUT I couldn't get Direct Digital Filing to work.
Neither Technical Support nor internet forums helped me entirely. I just took good tips here and there and finally got it all working together. Had a nightmare of a time figuring it. I called HP Tech Support and they told me I had setup everything on the L7780 correctly...only it just wouldn't working. Tech Support didn't offer to send me a new printer, but only suggested that I could do without Direct Digital Filing???
What I did...
Uninstall everything, the HP software from laptop. Making sure that all traces of the printer, or its drivers were off computer. Reset Network settings to default on printer. Reset factory defaults under Tools Menu on printer. Reset my wireless router.
1. I turned the router on
2. I turned the printer on (at this point, it is not connected to the network at all, either ethernet wire, or wireless, it has no IP address)
3. I turned my MacBook on
4. Connected my MacBook to L7780
5. Installed the Printer software that I downloaded from HP website on MacBook. (Installed L7780 as USB)
6. Tested the printing, and the scanning from my MacBook to make sure it works.
7. Downloaded the Software Update from Apple that always comes up to update the HP driver after installation.
Then for Direct Digital Filing,
8. From the L7780 I selected the Setup Wireless Network Wizard or something like that. After that, the printer was connected to my network, and had an IP address.
9. (Unable to get DDF working on my MacBook, I made a last ditch effort to see if it worked on my Windows Vista Laptop that had worked before as well) I turned on my Windows Vista Laptop, opened up Command, and pinged the IP of the printer. It worked.
10. I created a folder and configured it to share for the printer. After configuring it. It will tell you the Address that you use to type into the Direct Digital Filing speed dial path to the folder. I did that. I tried DDF to the Windows Vista folder and it worked on my Vista laptop. Encouraged...
11. I then tried it on my MacBook. I got into Terminal. I pinged the IP of the L7780. Strangely, I got an endless ping result list, it wouldn't stop. You have to press CTRL+C to stop it.
12. Then I created a folder in root directory of my MacBook Hard Drive. "Scan." Went into Systems Preferences. Went into the Sharing Tab. Clicked the + sign to add a shared folder. Selected the new "Scan" folder. Made sure the Option was for SMB sharing (Must type in user ID & password). Made sure "File Sharing" was selected.
Voila it finally worked!!!!
NOTE:
In the EWS? (web embedded print server by typing in the IP of the printer in your web browser)the Path is as follows: \\HARDDISK\Scan
type in user name & password
leave PIN blank, or erase it if there is anything there
(If you have it in your Documents folder, it would look something like this... \\HARDDISK\Users\Username\Documents\Scan ..... However, becareful in the EWS if your path name is too long, you can't type in the entire path .... ALSO the original time that it was working (I don't know how)... I had my path as \\192.168.1.5\Username\Documents\Scan .... For some reason I was able to use my IP address of my MacBook, and then skip to my User name without the "Users" path before it .... However, since I reinstalled my MacBook, that address no longer worked for some reason.)
NOTE:
Either After I got it working on my Windows Vista Laptop, or after pinging the printer from my MacBook. I noticed a strange change in my Networks in the System Preferences. There was a new Location ncamed "hp nct temp set" instead of the original "Automatic" location that was there before. On the left, all "Airport" icons, "Connected" & full signals, instead of a variety of icons, Bluetooth, Airport, Ethernet, etc that the original Automatic location had. Either way, it seems to be making the Direct Digital Filing working, so I won't ask why. Further details in "Advanced" showed nothing different other than under "Airport" "Preferred Networks:" there was an additional Network Name "hpsetup" other than my home Wireless network. All other settings seem to be the same.
SUMMARY:
(Like I said, I'm not sure if Direct Digital Filing started working on my Macbook running Leopard because I got it to work on my Windows computer first, or because I used Terminal to ping the printer.)
but...
1. Setup L7780 wirelessly by making sure your Wireless network is working, and then turning on the printer, and then select "Wireless Setup Wizard" under Network on printer. It will give you a list of wireless networks from which you choose yours, and then type in the security password. After that is complete and it says your printer is now connected to the network, select display wireless network settings to make sure the L7780 has an IP address.
2. On your Mac, open up Terminal and ping the IP of L7780. CTRL+C to stop it from pinging if it doesn't stop automatically
3. Create and share folders on your Mac (making sure it's SMB with user id and password, and that the path to the folder isn't too long)
3. Then setup Direct Digital Filing speed dials in the EWS by typing in the printer IP address in your web browser and going on the "Settings" tab.
4. Test it from the L7780 by pushing the Direct Digital Filing button under Scan!
I wrote this out for all those people that must be having a hard time with this as I had myself, and not getting any help from the internet or from Technical Support. I hope I figured it out for most of us.

I found this post and the HP instructions for setting up digital filing to be extremely frustrating, because nothing worked -- UNTIL I tried shutting down my Mac and rebooting after entering the settings (a simple restart would probably have done as well). Digital Filing then immediately worked like a charm. For the benefit of others like me who find abstract paths useless, here is the specific path setting that works on my Mac (you will of course have to use a different path on your Mac, but this will give you a real-world example of a path that works) -- this is on an HP Officejet Pro L7780:
\\BillCheesemanG5\cheeseb\Public
In abstract terms, this is:
\\<computer name from Sharing pane of System Preferences>\<short user name>\<folder named Public in my user domain, which comes already set up for sharing when you install Mac OS X>.
I hope this helps somebody.
Bill Cheeseman

A PDF file was filed in documents. when trying to move this file to trash i got response : operation can't be completed because the itempdf is in usen

A PDF file was filed in DOCUMENTS, when trying to move this PDF file to trash I got the response: "Operation can't be completed because the item ..... is in use".
How do I get this document deleted from the system?

The suggestion to move items from documetns to desktop and then moving to trash is the one that worked.
I have now one other question and that is that during my strugle with the original problem I called with Apple helpline and there they suggested to move the application "Preview" to trash and then the issue would be solved. I did so but clearly the issue was not solved.
Bottom line is that with your solution I got rid of the PDF files, but I still need to reinstall the Preview application. Do you have suggestions how to do that??

XI 3.0 E-Filing GB R/3 RFC configuration to XI

Similar Messages

Maybe you are looking for