XI 3.0 Import SCW and importing IR Objects issues

Hi,
I am working on SAP XI 3.0.
I imported IR objects in the repository through .tpz file and all the objects were imported successfully. I was able to view all the objects. Then I manually created the SCW in the SLD.
I had delete the IR objects and did re import successfully but the objects are not displayed in the list.
Also when I try to import the SCW it is imported successfully but not displayed in IR.
Appreciate your support
Thanks

Hi,
I have informed the my basis team on the import issue.
But I have two queries.
1.When I import the SWCV version from its going directly to the Changed List -> Closed. And every option is disabled in the context menu when I right click on the SWCV.
2. How to import the SAP Basis v 7.0 content into Integration repository. When I imported SAP BASIS 7.0 from SLD it went to the Changelist - closed.
Thanks
Zak

Similar Messages

Exporting and importing Configuration objects in PCK

Hi all,
Anyone have a idea of exporting and importing configuration objects in PCK .
please give me step by step guide if you have any related document.
Thanks
Ashwin

Hi ashwin
Welcome to SDN forums
Check out the following thread for more info
PCK Configuration Export and import
<i>reward points if helpful</i>
Regards
krishna

Updated to LR 5.4, images now importing extremely slow. After importing and rendering images are still very slow to go through and develop. No issues in LR 5.3 which was very fast.

After importing and rendering images are still very slow to go through and develop. No issues in LR 5.3 which was very fast. Canon,Nikon, Leica and Fuji files all rendering slow. iMac 2.9 ghz 16gb RAM OSX 10.8.5. Catalogs and images are kept on external drives. Drives running fine. Really need a fix on this since I'm norally imported and processing at least 4,000 images per LR Catalog. Is there way to revert back to 5.3? I can't use 5.4 is its current state. Thanks.

Download LR 5.3 and install it
By the way, lots of people have this complaint about LR 5.4, and the advice I give is to use LR 5.3 unless you need one of the new camera models supported by LR 5.4

How to export and import customized Object

Hi All,
I would like to communicate with system clipboard by importing and exporting the Objects.
Assume that i have a RectangleBean object containing x,y,width and height properties and respective setters and getters.
i am drawing the rectangle object by using the RectangleBean object values.
now i want to export and import the RectangleBean object to system clipbord to draw a rectangle on other window when the user performed paste functionality. In other words communicating the RectangleBean objects between the two windows.
Thanks in Advance
Dorairaj M

DoraiRaj wrote:
Hi All,
I would like to communicate with system clipboard by importing and exporting the Objects.
Assume that i have a RectangleBean object containing x,y,width and height properties and respective setters and getters.
i am drawing the rectangle object by using the RectangleBean object values.
now i want to export and import the RectangleBean object to system clipbord to draw a rectangle on other window when the user performed paste functionality. That's not going to work: if you are talking past the bean object into the clipboard and have something like MS-Word use it as a way of recreating your graphic using your bean... no, that's just not going to happen.
If you are saying you want to create another of your graphics on another Java window in the same JVM session, then just pass a reference of the window's graphic context to a setter and have at it.
If you're talking about some JEE functionality, then you're going to have to use RMI or some other standard method to get your object over to the other box or it's effects.
In other words communicating the RectangleBean objects between the two windows.Not by cutting and pasting to the clipboard.

Error while import Database Objects in Oracle Module

Hi All,
I am getting dialog window saying below error when I click on Finish button on Import database objects wizard for oracle module.
MMM 1034: Property ENCRYPT does not exist
When clicked on detail button on error window it show below errors in detail
MMM1034: Property ENCRYPT does not exist.
MMM1034: Property ENCRYPT does not exist.
     at oracle.wh.repos.impl.extended.PropertyHelper.getProperty(PropertyHelper.java:741)
     at oracle.wh.repos.impl.extended.PropertyHelper.getScalarPropertyValue(PropertyHelper.java:833)
     at oracle.wh.repos.impl.extended.PropertyHelper.getScalarPropertyValue(PropertyHelper.java:828)
     at oracle.wh.repos.pdl.foundation.OWBRoot.getScalarPropertyValue(OWBRoot.java:5121)
     at oracle.wh.repos.impl.foundation.CMPElement.getScalarPropertyValue(CMPElement.java:1641)
     at oracle.wh.repos.impl.foundation.CMPElement.getBooleanProperty(CMPElement.java:1740)
     at oracle.wh.ui.integrator.common.ImportEntityAlgorithm.setColumnEncrypted(ImportEntityAlgorithm.java:4650)
     at oracle.wh.ui.integrator.common.ImportEntityAlgorithm.doImportColumns(ImportEntityAlgorithm.java:4400)
     at oracle.wh.ui.integrator.common.ImportEntityAlgorithm.importColumns(ImportEntityAlgorithm.java:3487)
     at oracle.wh.ui.integrator.common.ImportEntityAlgorithm.importTable(ImportEntityAlgorithm.java:1267)
     at oracle.wh.ui.integrator.common.ImportEntityAlgorithm.dispatchElement(ImportEntityAlgorithm.java:610)
     at oracle.wh.ui.integrator.common.ImportEntityAlgorithm.importElement(ImportEntityAlgorithm.java:435)
     at oracle.wh.ui.integrator.sdk.EntityAccessor.importElement(EntityAccessor.java:77)
     at oracle.wh.ui.integrator.common.ImportService.importElement(ImportService.java:1144)
     at oracle.wh.ui.integrator.common.wizards.ImportElementTransaction.run(ImportWizardDefinition.java:730)
Please see below information and steps I followed
1. My PC running on Windows 7 64 bit
2. Installed Oracle Database Enterprise Edition 11.2.0.1.0 software
3. Created a listner after insalling above database software
4. Created data warehouse database and unlocked OWBSYS and OWBSYS_AUDIT accounts
5. Set ORACLE_HOME=C:\oracle\product\11.2.0\dbhome_2\
6. Set TNS_ADMIN=C:\oracle\product\11.2.0\dbhome_2\NETWORK\ADMIN
7. After doing this I was able to connect all the source and data warehouse databases I am concerned with.
7. Installed Oracle Warehouse Builder Client 11.2.0.3.0 64 bit
8. Created repository using repository assistant insatlled duing database software.
9. Created oracle database module for the schema created under data warehouse database.
10. Tried to import database objects for the oracle module and got the error explained above when clicked on Finish
Please someone reply to this thread since I searched lot on google and didn't get any solution and not understanding what this issue is.
Thanks in advance
Bhushan
Edited by: Bhushan Bagul on Sep 7, 2012 2:46 AM

it looks like not all objects are created for XX_BPEL_CREATEUSEMP
synonyms and all grants are there ?

Error in importing Configuration objects of PI 7.0 to PI 7.1

Hi All,
My server is upgraded from PI 7.0 to PI 7.1.
I am getting Error while importing Configuration objects of PI 7.0 to PI 7.1 now.
Pls see the below error
Attempt to access the 1 requested objects on 1 failed. Detailed information: com.sap.aii.ib.core.roa.RoaObjectAccessException: Attempt to read object Adapter Metadata Mail | http://sap.com/xi/XI/System, type AdapterMetaData from application REPOSITORY on system REPOSITORY failed. Object does not exist. Detailed informatio n: Software component version with key ID: b38bcd00e47111d7afacde420a1145a5 not found
Pls suggest

Hi,
It seems that adapter metadata has not been loaded into integration repository and because of that when you are trying to import configuration objects in ID then you are getting the error.
The SAP adapter metadata objects are located under the namespace http://sap.com/xi/XI/System of software component SAP BASIS.
What you can do is, if you have installation dvd's then you can copy from their or you can simply [_DOWNLOAD_|https://websmp205.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=SEARCH&HIDE=&SEARCH_SPAT=X&SEARCH_BPAT=X&SEARCH_CD=X&SEARCH_P=X&SEARCH_PV=X&SEARCH_C=X&SEARCH_CV=X&SEARCH_TA=&SEARCH_V=&HIDE_EXPERT_SEARCH=X&SEARCH_MAX_RESULT=20 ] from sap market place (refer this [thread|how to import Adapter metadata;) (you must have S-user id for this) and then after you need to do as mentioned below...
1. First unzip the file (if it is zipped) and then put it in the import directory: \usr\sap\<SID>\SYS\global\xi\repository_server\import\
2. Now login to IR and then from menu TOOLS ---> Import design objects and import it.
3. After that in ID, Environment ---> Clear SLD Data Cache
4. Now you can try to import configuration objects...
Regards,
Sarvesh

Importance of object dependency type procedure

Hi Friend,
Good Morningu2026
Could any one explain the importance of object dependency type procedure and its uses with same scenario.
Thanks in advance,
Mohan M

Hi Mohan,
Procedures are used to infer values for charecterisitcs. These are a type of object dependencies used in VC.
Procedures can overwrite defualt values or they can set defualt values for charecterisitcs, several procedures can be assigned to an object (for eg. a BOM item or operation) and define processing sequence.
These are maintained in Charecteristics, Charecteristic values, configuration profiles, BOM item, Routing operation etc.
Eg: Processing Sequence:
A configurable material has characteristics COLOR and PRESSURE. The following procedures are allocated to the configuration profile of the material.
0010 $SELF.COLOR = u2018GREENu2019 IF PRESSURE >= 10
0020 $SELF.COLOR = u2018YELLOWu2019 IF PRESSURE >= 50
0030 $SELF.COLOR = u2018REDu2019 IF PRESSURE >= 100
The sort sequence ensures that pressure greater than or equal to 100 always sets the color u2018redu2019.
Inferring Charecteristic Values with procedures:
Let's assume Configurable material BIKE has the following characteristics:
CharacteristicS AND THEIR Values
WEIGHT
FRAME                                          Aluminum                  10 KG
                                                     Steel                           14 KG
EXTRAS (multiple-value)              Mudguard                   0.5 kg
                                                      Luggage rack             1.0 kG
Procedure
1. Create a procedure for the weight of the BIKE, depending on the frame.
2. This procedure has the following source code:
$SELF. WEIGHT = 10 if FRAME = u2018Aluminumu2019,
$SELF. WEIGHT = 14 if FRAME = u2018Steelu2019.
3. Allocate the procedure to the configuration profile of material BIKE.
The weight of a bicycle increases if you select additional extras, such as mudguard or luggage
rack.
1. You define a procedure with the following source code:
$SELF.WEIGHT = $SELF.WEIGHT + 0.5 if EXTRAS = 'Mudguard',
$SELF.WEIGHT = $SELF.WEIGHT + 1 if EXTRAS = 'Luggage rack'
2. Allocate the procedure to the configuration profile of material BIKE.
Result
1. When you configure the bike, the value u2018Aluminumu2019 is selected for characteristic FRAME.
This triggers the first procedure, which sets the value 10 kg as the WEIGHT.
2. Characteristic EXTRAS has values u2018Mudguardu2019 and u2018Luggage racku2019. This triggers the
second procedure, which increases the value of characteristic WEIGHT to 11.5 kg.
You can also use procedures to count or summurize values of charecterisitics.
You can use procedure to change the values in master data such as BOM / routing. and also to maintain default values.
Hope this will be helpful to you. Any queries, Please post.
Regards,
Pavan

Re-importing Configuration Objects

experts!
I have imported Configuration Objects from .tpz files in Integration Directory. Because of those objects where unable to activate, I did a reject change and all objects were gone. When I try re-import from the same .tpz file, it is not showing in the file list. The .tpz file is there in the import folder of directory.
Please help me to re-import objects from .tpz file.
thanks
nikhil

Hi,
Here we have to consider some points while Exporting & Importing the .tpz files.
1)Once you export that configuration objects, the tpz file will be created at Export DIR.
2)From there we have to copy that file into Import DIR.
3)Once You import the tpz file from Import DIR or faild to Import DIR means those files will be moved to Imported Files DIR.
4) Now if we are looking to import those again means , they will not be available to import in ID.
So we have to copy that file again from the Export DIR and Paste it inImport Folder
REgards
Seshagiri

Importing LCA applications issues

Hello everybody.
In the last few days I've been working with the LCES2 Linux virtual appliance made available by Adobe and I tried to import a fairly complex application developed with LCES 8.2.1.
I stumbled across a few issues I'd like to share with you.
The LCA archive was created with LCES WorkBench and I had no issues with previous versions of LCES; in LCES2, I had to import it using adminui [LiveCycle Archives (8.x)] and then, using LCES2 WB, I had to create a new application and import Processes and Resources from the server.
Once the operation completed, I noticed the following:
1) FTP Exceptions are not handled
I had a couple of FTP "Get to filesystem" and "Put" operations whose "FTPConnectionException" was not handled and caused a LCES exception; as a workaround, I had to remove the exception and "re-draw" it as to point again to the handling block (and it worked).
2) SubProcess renaming
The main process had a subprocess named "PDF/A Operations" which, once imported into LCES2 WorkBench, was renamed (in the [Applications] view) as "A Operations". This seems to be a cosmetic issue since I did not have to change the invoking block as to reflect the change of the name.
3) Accented characters
In both a "Send with Document" email operation or in a simple assignment (Setvalue/Execute) I had an expression which contained accented characters (eg, à or è); I had to edit the message/assignment as to retype the offending characters (which got depicted as []) as to let LCES2 handle them as expected). The same went for the GeneratePDFOutput which suffered from the same "disease"
4) Missing Font
Since the original project was developed on a Windows 2003 server, I had to change a couple of fonts (namely, the "Times New Roman" one) in a form since this font does not exist under Linux by default (and I did not want to spend a lot of time by importing the missing fonts into the Linux box)
5) Import issue
I had a process who got incorrectly imported into the new LCES2 environment; by "incorrectly imported" I mean there are some operations (which existed in the LCES 8.2 one) which have not been imported into LCES2. I've still to fix it but I think a simple XML export from LCES WB + Import *might* fix it.
If you have suggestions/opinions, please let me know.
Have a nice Xmas time.
Rob

In the Region Inspector on the left of your Arrange you find a little box labeled "follow tempo" - if you untick that box the Audio will play at the original speed.

Problem when importing SLD objects

HI,
I am trying to export and import SLD objects from Dev to Prod. For that I have studied weblogs and following the below procedure:
to transfer SLD objects:
Export the Business system in SLD of DEV server
Select the Business system and click export button, then download file and saving to a local machine.
and importing
go to adminstration - > import the file
now while importing the file on the production server, it is displaying " The target namespace of special import has already one or more data, import may corrupt the data". Below that two buttons Cancel import and Import anyway.
what to do at this stage?? shall I import in this way??
Please suggest me how to proceed....
thanks in advance,
anil

Hi Satish,
Have you already defined a business system with the same namespace in the Prod SLD??
Regards,
Sushumna

Importing Development Objects in Integration Repository ?

Hi ,
How do i import development objects that have been exported ? e.g , i export a "message mapping" object using Tools->Export Development Objects, could see it stored in a folder in the XI server m/c , however , when i try import development objcts option from Tools menu, i don't see an option to specify the location of the .tpz file which has to be used for import !!
Also , if i try to import the message mapping object which was created in a different namespace to my new namespace, will there be any issues ?
Are there any changes that have to be done in my new namespace( assuming i will be able to do the import in the first place).
Ne pointers as to how to do it are welcome
Thanks
Saravana

Hi,
When you export 'a message mapping object'/repository objects (all objects in repository is called repository objects), it is stored under
<install_path>/xi/repository_server/export
To import this object, you must manually copy this into
<install_path>/xi/repository_server/import
and then choose the Tools -> Import Design Objects..." menu option to import the repository objects (only the files from the import directory can be selected).
If the import is sucessful, the import object will be moved to /importedFiles folder.
While importing, i don't think you can change the namespace of the object. After importing also it will have the same namespace as before importing.
Hope it helps.
- Sreekanth

Problem in Importing Configuration object

Dear All,
I am facing the problem while importing ID object.
Business system INTEGRATION_SERVER_XIP is not assigned to a business system group with the ID (XISystemGroup).
So , I just try to create a Group in Business System in SLD. But I could not find the option to create the System Gourp.
I could n't see <b> edit groups </b>
any clue..
Regards
Danab

Hi,
First, you have to start the SLD.
To create a group, proceed as follows:
> Business Systems
> Click on the drop-down next to Group and select Edit Groups
> Create a group for each environment (eg DEV, TST, PRD). Specify for each group which Integration Server is used.
To assign business systems to a group, proceed as follows:
> Business Systems (Group = all)
> Select your Business System
> Click on the Integration tab.
> Select the related Integration Server (which is associated with a group - see step 1)
To map your DEV Business Systems to TST Business Systems etc., proceed as follows:
> Business Systems
> Select the group of your choice
> Select your Business System
> Click on Transport
> Click on Add/Change Target
> Select the Target Group and System
KR, Danny De Roovere

Problem in importing scenario objects from Development to Production in XI

Dear Gurus,
I have a certain probelm happening as follows:-
We have a 3 Sytem Landscape as follows :-
Client 400-Development ,
Client 500- Quality
Client 700 - Production
When he scenario (.tpz) files of directory and integration server are transported from 200 - 500 , (ie .tpz files are transferred from the export folder of directory and repository server to import folder of directory and repository server via FTP) the scenario is visible in the namespace in 500 .
The same when followed in 700 , after importing the objects from the import options under tools in repository as well as directory , the objects are not imported under the specified namespace in it's SWCV.
Please suggest what could be done !!!!
PS: We have deployed XI 3.5.

Hi Ashish,
I hope you have done ftp from 500 to 700 instead of 400 to 700. If yes then I dont think you should run into any of these issues. Also when it is done are the objects available in import and export folders of client 700 which is your production. If yes then try to import them in production. Also make sure you dont have anything in your change list. If you have something under the change list then you may run into some issues. Also look at this blog for the folder loactions:
/people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
Regards,
---Satish

Import Design Objects in Service Builder

I am able to export and import configuration objects in Configuration Integration Builder from the Tool menu.
I am able to export Design Objects in Enterprise Service Builder.
I am also able to import the Design Objects in Enterprise Service Builder, however, I am not able to find the imported objects.
Although system says the import is successful, but I am not seeing the imported objects in left side panel.
There is nothing in Change Lists either.
My question is where is the imported objects and how could I find them?
Thanks in advance.

Hi Jimmy,
This is because of the version conflicts in yuour target system.If you try to edit something in Integration Repository in the target system and try to transfer you will get version conflicts.
Please check if this is the error.
Regards,
Naveen.

Unable to import Business Object in DQE

I've some prob with "importing business Objects" in SAP Enterprise Portal
I've EP6.0 SP16 installed.
While importing the Business Object from "BW" System
I expand the BW Node but alas! dont get any BO in it..
It shows a message "Loading...." and hangs..
I've read some of the discussion Forum on SDN...
I've given the DQE Admin UserID and Password correctly.
Also I've done the User Mapping for BW System and gave the same UserID and Password as given in DQE in the "Personalize" section
I've tested the "BW" Connection using the option "Connection Test".
It gives "DQE Connection Succeeded'.
Please let me know where i'm wrong..
Thanks..

First thing dear Actually you are using the wrong term it is not exactly import it is EXPORT the existing BC4J component in Jdev.
Just run the export command it will automatically create the package in the Home directory.
Create a new JWS and Project and add related PG or Region there.[[Which you have exported]]
Thanks
--Anil

XI 3.0 Import SCW and importing IR Objects issues

Similar Messages

Maybe you are looking for