XI 3.0 SP14 Synchronous SOAP- XI- ABAP Proxy - fails with "System Error"

Hi All,
The synchronous response message fails at the stage "Receiver Identification".
It seems that the synchronous response XML has no "sender" attribute, so obviously the receiver determination fails.
In the message monitor I can see the correct payload coming from the ABAP proxy, so that part looks OK.
I have the same scenario working perfectly on another system landscape, so there might be a configuration side to it.
Thanks is advance,
Ofer
Message was edited by: Ofer Even-Tsur

Hi,
for the error information SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_BE</SAP:Code>
looks like xi is not able to find a reciever of best case. Open up the scenario in COnfiguration, open up the modify(add spaces) and activate reciever determination / reciever communication channel.
cheers,
naveen

Similar Messages

NonSAP client- SOAP- PI- ABAP Proxy- SAP Business System EOIO Question

Hey all... wondering how and if the following can be accomplished
I have a nonSAP client that is sending SOAP message pairs to PI 7.11 SP06. PI is then sending these messages via ABAP Proxy to our SAP business system. By pairs I mean for each event in the client it's going to send 2 messages to PI and then to SAP business system. These messages have to be processed by PI and SAP in the exact order the client sends them.
My goal is to have the client somehow specify the queueID and quality of services as EOIO when it calls PI via the SOAP message. The reason is when the client sends 1 set of messages we don't want it to block subsequent message pairs if something goes wrong with the first. We're going to have an "ID" as part of the queueID that will be unique by pair.
My question: is it possible to specify this queueID (and the qos=EOIO) in the SOAP message that is sent to PI so this queueID carries through PI and into the SAP business system?

hi,
you can do that :
a) in standard with http adapter :
http://help.sap.com/saphelp_nw04/helpdata/en/43/64db4daf9f30b4e10000000a11466f/content.htm
with &queueid=<queueid>
b) not in standard with SOAP adapter
Regards,
Michal Krawczyk

How to use a standard service available in SOAP to ABAP proxy scenario?

Hello Experts,
My scenario is SOAP to ABAP proxy wherein I have to send Sales Order from Third party TC to SAP.
Third Party->SOAP Adapter->PI 7.1->ABAP Proxy->ECC.
I have seen a standard service available at the following URL.
http://esworkplace.sap.com/socoview(bD1lbiZjPTAwMSZkPW1pbg==)/render.asp?packageid=DEE98D07DF9FA9F1B3C7001A64D3F462&id=13A904EA0E8711DC5A11000F20FCB6A9.
Can I use the above web service for my current scenario? If yes, please explain how?
Thanks & Regards
Nidhi

Third Party--->SOAP Adapter--->PI 7.1--->ABAP Proxy--->ECC
I am actually looking for using standard webservice that has been provided by SAP in ESWorKSPACE available on sdn.
The WS that you mentioned is inbound and hence wont suit your requirement!
The reverse flow may however be possible.
Create Sales Order_V2
synchronous inbound service operation
Regards,
Abhishek.

Soap to abap proxy

Hi,gurus:
I wanna to configure a scenario about soap to abap proxy,do you have any step by step configurations about that?Any help will be appreciated!

Sender SOAP Adapter
Receiver RFC/IDOC/ABAP proxies.
IR
Step 1:
Create the Sender/Receiver Datatypes for Request & Response
step2:
Create the MT for Req & Res
Step3 :
Create OB Message Interface ( Syncronous) /IB Message Interface( Synchronous)
step5 :
Request Mapping : Sender Req MT--> REcv Req
Response Mapping : Recv Res----->Sender Res MT
Step6:
Interface Mapping
ID
Step1 :
Configure Sender Soap Adapter
Step2 :
Configure Receiver XI Adapter
Step 3: Configure Sender Agreement, receiver determination,Interface determination,Receiver agreement
Step 4:
Create WSDL file.( ID->tools-Defien webservice)
save the file as .wsdl file
Give the file to sender system
SAP System
Step 1:
Goto Sproxy T.code -> select IB interface -. Right click create object ,it will automatically create aproxy class.
Step2 ;
write an ABAp program to send the data to class.
Below weblog helps in wrting ABAP program
File to R/3 via ABAP Proxy
Regards,
Jayasimha

Acknowledgement for AsynThird-party-- SOAP-- PI-- ABAP proxy-- ECC scenario

Can someone please provide me a step-by-step for Third-party>SOAP>PI>ABAP proxy>ECC scenario.
Third-part system is sending an Asynchronous HTTPS message to PI which is then routed to the ECC system to do some processing. I have read many blong and all SAP Docu available on this subject, but i am still confused.
I understand that ABAP Proxies supports acknowledgement, but what needs to be done in the third-party system to be able to receive acknowledgements. Is there any special config. that needs to be done in Sender SOAP adapter?
What diff. needs to be done in ABAP proxy to be able to send acknowledgement messages, any config. in XI receiver adapter?
I will appreciate any guidance.
Thanks,
Saurabh

HI
Third party application need to have the synchronus communication enabled. If not then you need to get a wrapper develop for this kind of communication
For proxy development
Just go through these links:
How to create proxy.
http://help.sap.com/saphelp_nw04/helpdata/en/14/555f3c482a7331e10000000a114084/frameset.htm
ABAP Server Proxies (Inbound Proxy)
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
OutBound Proxy (Client Proxy)
/people/sravya.talanki2/blog/2006/07/28/smarter-approach-for-coding-abap-proxies
Outbound Proxy (Client Proxy)
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
How to Activate Proxy.
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
File to R/3 via ABAP Proxy with good example
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
http://help.sap.com/saphelp_nw2004s/helpdata/en/48/d5a1fe5f317a4e8e35801ed2c88246/frameset.htm
Synchronous Proxies:
Outbound Synchronous Proxy
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2boutbound%2bprogram%2b-%2bpurchase%2border%2bsend
Inbound Synchronous Proxy
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2binbound%2bprogram%2b-%2bsales%2border%2bcreation

SOAP to Abap Proxy with attachment

Hi Experts,
i am facing one problem while developing one interface from SOAP to ABAP Proxy with attachment.
the sender system is sending empty soap message but with all its content in the attachment.
we need to parse the attachment and send the data to ECC system through proxy.
we made some research on SDN and found out that in sender soap adapter PayloadSwapBean is not supported.
however in receiver XI adapter the module tab is not editable.
could you suggest any solution to handle this interface?
thanks in advance.

Hi Aditya,
Can you just try to use SOAP with Servlet(Axis) protocol, since standard SOAP sender does not allow modules to be used.
please refer http://help.sap.com/saphelp_nw04/helpdata/en/45/a39e244b030063e10000000a11466f/frameset.htm
The first attachment is put in the main payload; further attachments become attachments of the XI message.
http://help.sap.com/saphelp_nw70/helpdata/EN/45/a4f8bbdfdc0d36e10000000a114a6b/frameset.htm
Regards,
Srinivas

DbSl Trace: CONNECT failed with sql error '12518' at IMPORT ABAP

Hi
We are trying to install ECC 6.0 on windows 2008 SP2 and oracle 10.2.0.4. We get an error at IMPORT ABAP phase.
content of import_monitor.java :
java version "1.4.2_26"
Java(TM) Platform, Standard Edition for Business (build 1.4.2_26-b03)
Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_26-b03, mixed mode)
Import Monitor jobs: running 1, waiting 1, completed 26, failed 0, total 28.
Loading of 'SAPSLOAD' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 26, failed 1, total 28.
content of SAPSLOAD.log:
E:\usr\sap\UED\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20100705173108
E:\usr\sap\UED\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/701_REL/src/R3ld/R3load/R3ldmain.c#5 $ SAP
E:\usr\sap\UED\SYS\exe\uc\NTAMD64\R3load.exe: version R7.01/V1.4 [UNICODE]
Compiled Feb 24 2009 23:41:07
E:\usr\sap\UED\SYS\exe\uc\NTAMD64\R3load.exe -i SAPSLOAD.cmd -dbcodepage 4103 -l SAPSLOAD.log -stop_on_error
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12518
DbSl Trace: CONNECT failed with sql error '12518'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12518
DbSl Trace: CONNECT failed with sql error '12518'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12518
DbSl Trace: CONNECT failed with sql error '12518'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12518
DbSl Trace: CONNECT failed with sql error '12518'
(DB) ERROR: DbSlErrorMsg rc = 99
E:\usr\sap\UED\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
E:\usr\sap\UED\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20100705173108
content of sqlnet.log file:
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleUED)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=UED)(CID=(PROGRAM=E:\oracle\UED\102\bin\sqlplus.exe)(HOST=U34SSAPUED)(USER=uedadm))))
VERSION INFORMATION:
     TNS for 64-bit Windows: Version 10.2.0.4.0 - Production
     Oracle Bequeath NT Protocol Adapter for 64-bit Windows: Version 10.2.0.4.0 - Production
Time: 05-JUL-2010 16:19:39
Tracing not turned on.
Tns error struct:
    ns main err code: 12560
    TNS-12560: TNS:protocol adapter error
    ns secondary err code: 0
    nt main err code: 530
    TNS-00530: Protocol adapter error
    nt secondary err code: 2
    nt OS err code: 0
Fatal NI connect error 12518, connecting to:
(DESCRIPTION=(ADDRESS=(COMMUNITY=SAP.WORLD)(PROTOCOL=TCP)(HOST=u34ssapued)(PORT=1527))(CONNECT_DATA=(SID=UED)(GLOBAL_NAME=UED.WORLD)(CID=(PROGRAM=E:\usr\sap\UED\SYS\exe\uc\NTAMD64\R3load.exe)(HOST=U34SSAPUED)(USER=uedadm))))
VERSION INFORMATION:
     TNS for 64-bit Windows: Version 10.2.0.2.0 - Production
     Windows NT TCP/IP NT Protocol Adapter for 64-bit Windows: Version 10.2.0.2.0 - Production
Time: 05-JUL-2010 17:28:38
Tracing not turned on.
Tns error struct:
    ns main err code: 12564
    TNS-12564: TNS:connection refused
    ns secondary err code: 0
    nt main err code: 0
    nt secondary err code: 0
    nt OS err code: 0
Best Regards...,

Hi,
TNS-12560: TNS:protocol adapter error
Probably your listener or database is down...
If both are running, just stop the installation and reboot the server.
Then again start listener and database and continue SAP installation with "Continue old installation" option..
Also make sure that below environment variables are set properly...
ORACLE_HOME
ORACLE_SID
DBSID
Regards.
Rajesh Narkhede

How to active ABAP Proxy in SAP system.

Hi All,
I want to work with ABAP proxies.How to active ABAP proxy in SAP system.What the configuration is needed.Is there any configuration is need in XI system to work with ABAP proxies.Please help me..
Thanks,
Kishan.

Hi Kishan,
You have to check whether ur r/3 system's(WAS 620 or above) excahnge profile has entries for integration builder.
Pls check the Example configuration for accessing
interfaces in the Integration Repository (exchange profile):
http://help.sap.com/saphelp_nw04/helpdata/en/14/555f3c482a7331e10000000a114084/content.htm
If the Parameters are not there u need to add in the respective section's as provided in the link.
exchange profile URL is:
http://r3servername:5<instance>00/exchangeProfile
I hope this provides you a solution.
Regards.
Praveen

SOAP error in synchronous scenario for ABAP Proxy with Oracle D/B

Dear Experts,
I am working in Sender ABAP Proxy <====>SAP PI 7.31 JAVA only <====> Oracle Database. My proxy configuration are working successfully.
Apart from that, I have maintained a SOAP sender communication channel under the ECC business system with
Transport Protocol as HTTP
Message Protocol as XI 3.0
Adapter Engine as Central Engine
When I am testing from ECC at Tx SPROXY, I am receiving following error.
com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.xi.routing.RoutingException: InterfaceDetermination did not yield any actual interface at com.sap.aii.adapter.soap.web.SOAPHandler.processSOAPtoXMB(SOAPHandler.java:746) at com.sap.aii.adapter.soap.web.MessageServlet.doPost(MessageServlet.java:505) at javax.servlet.http.HttpServlet.service(HttpServlet.java:754) at javax.servlet.http.HttpServlet.service(HttpServlet.java:847) at
1. In XI3.0 protocol, I can not select BE but when selected HTTP 1.0 as Message protocol then I can find the BE.
2. No Response message is shown in ECC when testing the message.
3. How do Receiver JDBC adapter for Oracle Database is configured
4. What would be Message Protocol for Oracle Database i.e. XML SQL Format or Native SQL format for Select operation.
Please guide.. All your inputs will be appreciated......
Regards
Rebecca

Dear Indrajit,
Appreciate your inputs.. Yes I have configured all the ABAP proxy configurations and there no question of missing any thing as Tx SLDCHECK in ECC is working perfectly fine.
But still to go, some of the queries needs more input.
1.In ID, i have created a Sender SOAP communication channel with listed details.
Transport Protocol as HTTP
Message Protocol as XI 3.0
Adapter Engine as Central Engine
Is there any parameters which I may be missing from Module tab of Synchronous SOAP Cc ?
2. In the Cc monitoring, the JDBC receiver status shows "Database operation successfully completed" but I could not find any response data from database. The Message monitoring should have 2 messages for 1 trigger, but I could find only 1 message by SOAP only?
Sorry to bother experts...Please answer in sequence...
Regards
Rebecca

SOAP--PI--ABAP Proxy-how to call this scenarion from third-party PeopleSoft

My scenario is:
Third-party Peoplesoft sending an Asynchronous XML message to PI through SOAP Adapter which will then be processed by ABAP proxy server.
I have everything in place (SDL,IR,ID & ABAP Proxy). I have created a SOAP tool that uses URL (http://host:port/XISOAPAdapter/MessageServlet?channel=party:service:channel) and XML message to test the process - it works.
Now the problem is the Peoplefoft system guys need help to figure out how do they reach our system and this process.
per my understanding, I created a WSDL using ID>Tools>Define Web Service option and sent it to them hoping they will be able to use this WSDL to program their call to our system.
I also additionally sent them the SOAP client tool that i use to test the process that has default XML payload in it.
The only change i made in WSDL before sending to third-party is - replaced location tag from the actual URL that reaches sender SOAP adapter to the external URL that will be used by PeopleSOft system reach our network. I think our network guys are going to map this external url to internal URL.
Is there anything else i can do as a PI consultant to help Peoplesoft reach our network and hit the SOAP Adapter (SOAP sender adapter channel for my process).
I will Appreciate any ideas.
Thanks,
Saurabh

As a PI developer, ur only task is to provide the correct wsdl to the Peoplesoft guys. As u have changed the URL, there is nothing else to be done at ur end.
The SOAP Client user just have to use the wsdl and fill in the data. Before the communication, please make sure that there are no firewall restrictions.
Regards,
Prateek

Synchronous scenario(ABAP proxy to HTTP_AAE) getting error exception as "Message Expired Exception"

Dear All,
I have done all the configuration for ABAP proxy scenario using AAE/ICO as per the below "how to guide" using SOAP as sender adapter using xi protocol. My SAP PI is 7.4 dual stack system. here third party is not a webservice its HTTP based we server so no wsdl.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70066f78-7794-2c10-2e8c-cb967cef407b?overridelayout=t…
However after running the scenario from ECC I am getting the exception as "Returning to application. Exception: com.sap.engine.interfaces.messaging.api.exception.MessageExpiredException: Message 53289257-97e0-06d0-e100-00000a70d384(OUTBOUND) expired.". I do not have any connection problem to third party(bank) URL. moreover I am able to get the response from bank using classical scenario s in PI, but the response message is not getting pushed to ECC, rather its reaming in PI SXMB_MONI with status "Log version".
Thats the reason I am trying to do using ICO, but using ICO PI is not even sending the request out of PI to bank. Please see the below receiver communication channel message log.
Thanks,
Farhan

Hi,
As per the log, the message has started 23:18:02 and failed at 23.23:02 it took 5min time, if message is not process certain time this kind of errors comes up. Have you changed adapter type for existing SOAP communication channel or created new? provide complete log of the message from starting time to ending time if possible.

ABAP Proxy throws HTTP-400 error

Hi,
I've created an ABAP Proxy/Enterprise Service in ECC6.0 to consume a webservice that is created in NetWeaver 2004s. Now, when I want to test the proxy, it gives me the error message:
SOAP:1.007 SRT: Unsupported xstream found: ("HTTP Code 400 : Bad Request")
The error originates from class CX_AI_SYSTEM_FAULT
I don't know if it is related to the proxy or with some system settings on ECC 6.0/Netweaver2004s.
Any help or document reference is appreciated.
Regards.

I investigated a little and here are a couple of things you could try:
- In note 1139406, they are talking about a scenario with HTTP error 404... I realize it is different than the 400 you get, but it may be worth checking if you have a similar problem as described there - it may give a clue what your problem is.
- Try to check if the endpoint URL to which the request is sent is correct... it may be missing the style parameter, like ?style=document. Go to SOAMANAGER and take a look at the system settings, perhaps there is a wrongly formulated URL that is missing the style parameter.
Hope this helps a little...

Consume WSDL in ABAP proxy : Issue with name space

Hi,
I was trying to consume a WSDL in ABAP and I have created ABAP proxy using wizard in SE80 and also did the LPCONFIG.
While calling the proxy methods it is throughing the "authrization failed" error because of the following issue.I have successfully executed same WSDL from some third party tools with out error.only difference I have observed in SOAP request is, Third party tools passing all name spaces at envelope level but in ABAP proxy it is not passing all name spaces at envelope level.
1. SOAP genarated from WSDL in third party tool.
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:tns="http://schemas.xxxxx.com ">
<soap:Body>
 <tns:GetKMContent>
 <tns:request>
 <tns:clientID>1</tns:clientID>
 <tns:employeeID>307478</tns:employeeID>
 <tns:languageCountryCode>en-US</tns:languageCountryCode>
 <tns:wscVariables>
 <tns:empcountry>US</tns:empcountry>
 </tns:wscVariables>
 </tns:request>
 </tns:GetKMContent>
</soap:Body>
</soap:Envelope>
SOAP genarated from WSDL in ABAP proxy.
<soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/">
<soap-env:Header>
<n0:Trace xmlns:n0="http://www.sap.com/webas/630/soap/features/runtime/tracing/">
<TraceLevel xmlns="http://www.sap.com/webas/630/soap/features/runtime/tracing/">Full</TraceLevel>
</n0:Trace></soap-env:Header>
<soap-env:Body>
 <nr1:GetKMContent xmlns:nr1="http://schemas.xxxxx.com ">
 <nr1:request>
 <nr1:clientID>1</nr1:clientID>
 <nr1:employeeID>307478</nr1:employeeID>
 <nr1:languageCountryCode>en-US</nr1:languageCountryCode>
 <nr1:wscVariables>
 <nr1:empcountry>US</nr1:empcountry>
 </nr1:wscVariables>
 </nr1:request>
 </nr1:GetKMContent>
</soap-env:Body>
</soap-env:Envelope>
I was trying to use the SOAP genarated in ABAP proxy in thrid party tool and end up with same "authrization failed " error. If I move the name space nr1 from <nr1:GetKMContent xmlns:nr1="http://schemas.xxxxx.com "> GetKMContent node to soap-env:Envelope <soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:nr1="http://schemas.xxxxx.com "> then it is working fine.
Question :Is there any way in ABAP proxy to pass name space at soap-env:Envelope level or is there any way to change the SOAP request once it is genarated from ABAP Proxy?. Is there any API to change SOAP information?
Thanks,

Hi Kavitha,
I am also facing the same issue.
Could you please share the solution if you have solved this.
Thanks,
Arun

File to ABAP Proxy (problem with inbound queues in R3)

Hi,
In File-XI-ABAP proxy scenario, XI is successfully picking up file and sending it to R3.
But in R3, an inbound queue is created in SMQ2 transaction code and I solved the same to automatically process the Queue by registering that in SMQR transaction code. But even though the inbound queue doesn't appear in SMQ2 (which means that it is processed successfully) it doesn't call the method EXECUTE_ASYNCHRONOUS. Can anyone help me whether I need to do any settings to run that method?
Also can anyone help me, after the inbound queue is successfully processed in SMQ2 transaction, what would be the next step to watch what exactly that queue has done?

Hi,
Please check the program code for Server ABAP proxy.
This will show you the trigerring of Proxy on inbound side.
ABAP Proxy inbound program - sales order creation - Community Profiles - Wiki
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2binbound%2bprogram%2b-%2bsales%2border%2bcreation
For Queues, you can go to SMQR and check for the register queue. Select and double click on it. If anything is stuck up then you can see in it. Even same with SMQ2
Thanks
swarup

HTTP to ABAP Proxy - Problem with "Current User" parameter

Hi experts,
We have a HTTP to ABAP proxy sceario, where I used an HTTP Destination to connect to the proxy.
We're trying to use the option "Current User" in that destination in order to login to ECC with the same user that in PI adapter plain.
The user exists i both systems, PI and ECC, with the same password.
Checking that parameter we get the following error:
<SAP:Error><SAP:Category>XIServer</SAP:Category><SAP:Code>INTERNAL.UNAUTHORIZED</SAP:Code><SAP:P1>401 </SAP:P1><SAP:P2>Unauthorized</SAP:P2><SAP:P3>(See attachment HTMLError for details)</SAP:P3></SAP:Error>
We think that PI is not getting the password.
Does aybody know how to do this?
Thanks and regards,
LUIS B.

Hi Chirumamilla,
If we put user and password in SM59 (unchecking "Current User") the commuication works without problems.
We don't want to leave a user set there, beacuse we are looking to access to PI with different users and login to ECC with the same user.
Thanks,

XI 3.0 SP14 Synchronous SOAP- XI- ABAP Proxy - fails with "System Error"

Similar Messages

Maybe you are looking for