XI 3.0 Version Conflict after SP 10 import

My XI 3.0 integration builder shows a version conflict for IDOC adapter meta data after we have implemented support package 10.
What needs to be done ?

Hi Peter,
We have this issue as well. not sure it is too much of an issue though.
Cheers
Colin

Similar Messages

Possible version conflict, sending purchase order to SUS in MM-SUS scenario

We are currently trying to get the MM-SUS scenario working. In this
scenario, we create a purchase order in the ERP/MM system. The
purchase order is then transferred into SUS via XI/PI.
After creating a purchase order in the MM system, the purchase order
reaches the SUS system, but then errors-out in the SUS system upon
posting. The specific error is paraphrased as follows:
No interface action for sender or receiver found (from Trace)
PARSE_APPLICATION_DATA
CX_ST_MATCH_ELEMENT
System expected the element http://sap.com/xi/SAPGlobal20/Global;
PurchaseOrderRequest
We suspect a version conflict. The SUS version is 7.01. The XI/PI
system is version 7.11.
Can you confirm or rule-out a version conflict?
The Integration Builder scenario we are using is Plan
Driven Procurement with Supplier Enablement.
We have tryed many variations in Integration Builder, but all
produce errors in SUS. The test tool in Integration Builder also shows errors
for certain message types. The message type ORDERS.ORDERS02
needed to be added manually, and did not come along with the scenario.
Edited by: Bill Guderian on Mar 19, 2010 4:53 PM

Any clue from here.
Note 936003 - ERS Invoice causes conversion error within SRM
When the SRM system attempts to process an ERS Invoice sent from the MM backend, a PARSE_APPLICATION_DATA CX_ST_DESERIALIZATION_ERROR fault is thrown.
Other terms
CX_ST_DESERIALIZATION_ERROR PARSE_APPLICATION_DATA SUS SRM EBP ERS Invoice XI Exchange Infrastructure Mapping
Reason and Prerequisites
This error will occur when the IDOC does not have a VPREI value; it is the result of an error within the divide logic of the XI mapping operation. This operation is performed within the XI system. A calculation of NETWR/MENGE is performed; however, the result is not properly formatted. As such, 72.30/10 produces a result of 7.2300002. This value is too long for the inbound SRM proxy and hence the error is thrown.
Solution
The solution to this problem is to add a FORMATNUM function within the XI mapping operation. This restricts the result to 2 decimal places, which adheres to the definition of the inbound proxy.
Step by step directions on how one implements the FORMATNUM function are as follows:
1. Log into the XI system with SAPGUI
2. Start the Integration Builder:Design tool (for steps on how to do this, review the steps below):
    a. Run transaction sxmb_ifr
    b. This will cause a browser to come up. Select the Integration Repository link
3. In the left pane, select the Objects tab
4. Navigate to the SAP SRM SERVER ' SAP SRM SERVER 5.0 ' http://sap.com/xi/SRM/SupplierEnablement/Global --> Mapping Objects --> Message Mappings folder
5. Double-click on MM2SUSInvoice
6. The right pane will display the mapping object
7. Select Edit mode
8. In the box that contains the output (Message Type: InvoiceRequest), navigate to InvoiceRequest ' Invoice ' Item ' Price ' NetUnitPrice
9. Double-click on the Amount element and you should see the mapping, represented graphically in the bottom pane
10. In the status line of the graphical editor, select Arithmetic from the list box:
11. To the right of the listbox, scroll until you see the FormatNum function
12. Click on FormatNum, which will cause the function to be added to the graphical editor. You may drag the box as desired
13. Select the connection that binds the if/then/else to the Amount box by grabbing the arrow within the input of the Amount
14. Release the drag of the connection while over the input to the FormatNum box. This will reassign the output of the if/then/else to the input of FormatNum
15. Create a connection between the output of the FormatNum box and the input of the Amount box. You accomplish this by clicking within the output and releasing within the input (respectively).
16. Save the modified mapping object
17. Activate the changes
    a. In the left pane, select the Change Lists tab
    b. Navigate to the Standard Change List entry
    c. Right-click the Standard Change List entry and select Activate
    d. Select only MM2SUSInvoice if more than one item is available, and press the Activate button
18. This will complete the required modification.

Version conflict in PI QA system

Hi All,
We are facing version conflict issue in QA system.
We transported a Mapping object from Dev to QA and after transporting it is giving Version conflict at QA.
This thing happen because some user has edited mapping program at QA level and activated .
We thought of transporting a deleted object first then the latest active version. But my doubt is that when we transport the same mapping program with same name PI will bring back object along with its history.
Can anyone having any idea about how to resolve this conflict.
Regards,
Navneet

Hi Ninu,
Thanks.
We activated the conflicting version from conflict tab and then transported the dummy changes from DEV to QA to verify it wont give version conflict any more.
it worked fine and conflicting version which we activated at QA considered as latest version for transport.
Regards,
Navneet

Version conflict while targeting a vi to RT engine

When i am targeting a vi to Labview RT engine the message "Version Conflicts between Host Labview and RT engines" is coming.
I am using a CFP-2100 and want to run a vi on it. (No PC should be connected with it)
After targetting how will i execute it on CFP? is it automatically executable?
Please reply me
--Alok Trivedi
Pune
-AL☼K

Thanx for replying me so soon.
I am still stucked with the problem.
I have Labview 7.0 installed on my computer and where i am making a vi which is to b loaded into CFP - 2100.
Here are other versions i am using.....
Field point VI manager 3.1.0
Field point Drivers 5.1.0
Data socket for Labview Real Time 4.2
Labview Real Time 7.1
NI-Irda RT 1.0.1
NI-Serial RT 2.5.4
NI-VISA 3.2
NI-Watchdog 2.1.2
When i switch the execution target to RT engine for remote device and enter the machine IP address it shows me "Version Conflict while targeting a VI to RT engine".
I talked to Rahul about this and he well told me how to repair version conflicts between Host machine and RT engine. I went to remote machine and by right clicking on "software" installed all the versions to remote machine according to the host machine.
the interesting thing is here it's not showing any version mismatch all the versions shown above are same as the host machine......but whenever i try to target the execution to RT engine it shows the version conflict.
now what all questionis running in my mind are :
1. Why the version conflict is occuring?
2. If I get succeed to targeting the execution of vi onto RT engine how would i install it to CFP, if i just copy and paste it via FTP how will it know what vi is to run? i think we'r missing some way to "install" the vi into CFP.
3 What is "RT Communication wizard for".......why it makes 3 other vi's....
4. what are the total ways to run a vi onto CFP
Waiting for your reply...
thanks again
-Alok Trivedi
Pune
-AL☼K

DAQmx version conflict preventing deployment

Hi all,
After installing LV2010 on both my dev machine and my RT target (rt desktop running Pharlap), I am unable to deploy DAQmx tasks to the target. The error message suggests that the deployment problem is related to a daqmx version conflict between the two systems, but looking at the software lists in Measurement and Automation Explorer (v4.7) both show components for DAQmx 9.5.1. I've reinstalled the daqmx components on both systems and have not gotten any different behavior. Anyone else having this problem or know of anything else to try?
Thanks,
tHa
CLAD

In grasping at straws I also noticed that the entries visible under the Software tree in MAX Explorer do not match those that appear in the dialog box when I select "Add/Remove" software. Maybe my system is using the wrong version of daqmx when it tries to deploy?
I've also been able to successfully run the tasks from the Explorer window.
CLAD

Version conflicts and similarities..

is it that supposing i have a version of Dev2000 Ver6 then i
have to have the same version of Designer2000 ie Ver6 only?
or else there will be a version conflict or probably the product
might not install??
I have Oracle 8i Personal Edition.
Dev2000 Ver 6
Des2000 Ver 2.1
but Des2000 fails to install in the ORACLE_HOME directory after
Dev2000 is installed.

You are a very astute person, jdhore! Thank you very much!
q ~ $ pacman -Syu
:: Synchronizing package databases...
testing is up to date
core is up to date
extra is up to date
community is up to date
unstable is up to date
archlinuxfr is up to date
gianvito is up to date
archlinux.pl is up to date
lnf is up to date
tango is up to date
:: Starting full system upgrade...
:: Replace bluez-libs with testing/bluez? [Y/n] n
:: Replace gtk-engines with gianvito/gtk-engines-svn? [Y/n] n
resolving dependencies...
looking for inter-conflicts...
Targets (4): ncurses-5.6-8 ntfs-3g-1.2812-1 qt-4.4.1-3 xine-lib-1.1.15-2
Total Download Size: 23.46 MB
Total Installed Size: 76.40 MB

Today I think firefox automatically installed a new version and after that it said my adobe flash was old so I had to update that. Now I can't open links in a new window.

Today I think firefox automatically installed a new version and after that it said my adobe flash was old so I had to update that. Now I can't open links in a new window.

Firefox doesn't install new versions of plugins, but Flash may update itself automatically.<br />
You are still one version behind on Flash, current is Flash 10.1 r85<br />
If the Flash player didn't update properly then you need to download the full version and run the installer as Administrator (right-click: Run as ...)
Flash Global Notifications Settings Panel:<br />
*http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager05.html
You are more versions behind on Java updates with having Java 6 U11, current is 6 U22.
*Java Plug-in 1.6.0_11 for Netscape Navigator (DLL Helper)
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)

File Transport: Version conflict.

Hi,
I have a doubt on a particular scenario while transporting object from QA to PRD using File transport.
I have exported a tpz file say 1.tpz from QA with say the following objects
Obj_1(ver 1.0)
Obj_2(ver 1.0)
Obj_3(ver 1.0)
Now before this 1.tpz is imported in PRD few more changes happend to Obj_3 and I exported again a file say 2.tpz
Now this 2.tpz has only Obj_3(ver 2.0)
Now the basis has by mistake Imported this 2.tpz file before importing the 1.tpz file. SO in my PRD the object Obj_3 is existing with a advance version i.e 2.0
Now my doubt is can we Import 1.tpz now in PRD and then again import 2.tpz ?
I am having a feeling that we will definately get in version conflict. Even if I ignore the warning during transport and go ahead with this procedure of importing 1.tpz and then 2.tpz again, will it impact my scenarios.
I am lookign for a quick suggestions.
Regards,
Rahul.

Hi Rahul,
If you import V1 file first & later V2, it will not impact on your scenarion & you wil be able to see latest object in PRD.
But V2 is already imported so import of V1 may not be successful.
You may generate a new export if possible & transport this. It should include all object with their lastest version.
Regards
Sushil

Problem installing trial version of After Effects CS4

Hi,
I'm trying to install the trial version of After Effects CS4 on Windows Vista Ultimate Service Pack 1 32-bit Operating System, Processor 2.4GHz, RAM 4GB.
At the initializing stage it gets to 90% on the 'Checking System Profile...' dialog box, something flashes and then it freezes.
I've downloaded it a second time in case of corruption.
I've rebooted several times and retried it with no other applications running.
I've run updates on any existing adobe products I have.
Any ideas? I've never had problems installing adobe products before.
Thanks.

Not your fault, known issue.
a) Download the Microsoft Installer Cleanup Utility and install it
b) Download the CS4 Cleanup Utility from Adobe's support pages
c) Run the CS4 Cleanup, electing to remove all debris from your failed install
d) Manually uninstall all instances of Adobe AIR products (Acrobat.com, Adobe Media Palyer) using Add or Remove Programs
e) Launch the Microsoft Installer Cleanup and look for instances of Adobe Installer 2.0. Have them removed. Optionally, have it remove other Adobe stuff that may have been left over from CS4.
f) Try to install CS4
Note: The cleanup utilities will not remove anything physically, only clean out the installer, so they pose no danger to your system. You will only lose the ability to uninstall those programs from Add or Remove Programs.
Mylenium

Hey, i have very strange prob with my iphone 5(latest version/updated), after resetting it, so it doesn't connect to my laptop, even it doesn't charge too. it does charge from wall charger i try all the possible methods but still i am facing the prob

Hey, i have very strange prob with my iphone 5(latest version/updated), after resetting it, so it doesn't connect to my laptop, even it doesn't charge too. it does charge from wall charger i try all the possible methods but still i am facing the prob any fix/solution for it.. Helppppp!!!!!!!!!!!!!!!!!!!!!!!! As soon as possible, it will be gratefulness,
Thnksssssss....

So you are saying that you followed all of the steps in the support document for problems with connection, including removing and reinstalling iTunes? You do not say what you have tried, so it is hard to make recommendations. If this is the case, then you have tried resolving driver issues? What if you go to Device Manager and look for the iPhone. You should be able to click on it and see about drivers. You can update/reinstall the device driver.

Why does Version Conflict occur?

Dear Experts,
I made a change in my DEV box for a mpping and transported it using CTS+ to both QA and PRD. No changes were made directly in either QA or PRD boxes. I have resolved the conflict by choosing the imported version.
However, I would like to know why did this conflict happen? Is there any other reason than the manual change on the object in QA or PRD, cos here that is ruled out.
Please suggest.
Thanks and Regards,
Merrilly

I do not think I did anythin of that sort anywhere.
Any other suggestions..
Thanks and Regards,
Merrilly

Is it possible to download older versions of After Effects?

I downloaded the adobe master collection CS6 trial, and most of the products were able to download just fine except a few, some of which I didn't really care about, but After Effects was one of them unfortunately and that was one of the reasons I was downloading the collection. I looked at the system requirements and discovered that the only version my laptop could handle was CS4. Is it possible to download the trial version of this without downloading it from shady sites? I just need to try it out, although it would be nice if it was free now.
Thanks in advance.
Brendon.

You can download a 30 day time limited Trial version of After Effects CS4 here. After 30 days it will cease to function without a CS4 serial number, which you cannot purchase now if you don't already have one.
http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html
Ensure that you follow the Very Important Instructions on that page first otherwise the links will not work.
You can no longer purchase After Effects CS4 and it definitely is not available for free even though it's a superseded version. So you'll only get 30 days out of it.
I take it you're trying it because you have a 32 bit system?

What version of after effects is the creative cloud version

what version of after effects is the creative cloud version

The most recent version is After Effects CC (12.2):
http://adobe.ly/AE_CC_12dot2_details

Trial version of After Effects - which do I choose?

I currently own the Design and Web Premium pacakge, but wanted a trial version of After Effects to complete a motion graphic I am creating.
The trial offer includes the choice of; a free trial download or to join the Creative Cloud and download now (Recommended - it's free).
I am a little confused as to what it means, to my knowledge the Creative Cloud is through subscription only and isn't offered for free. So I just wondered what it meant?
If I choose to join and download that trial will I then have to pay an annual subscription? - When I clicked this option no card details were requested and I do not have any linked to my Adobe ID.
Somebody help please?

I currently own the Design and Web Premium pacakge, but wanted a trial version of After Effects to complete a motion graphic I am creating... If I choose to join and download that trial will I then have to pay an annual subscription?
First things first: you say you want AE to complete a motion graphic. This would lead people to believe that you've used AE before. Have you? It's a yes/no question, and a "How tough can it be to learn?" response counts as a no.
Second question: if you DO download the 30-day trial, do you intend to continue using AE, assuming you already know how to use it?
The reasons for the questions:
AE contains many, many hidden pitfalls for the uninitiated that obliterate the tight deadlines of those who think, "How tough can it be to learn?", and those same pitfalls easily can extend a reasonable learning period beyond 30 days for busy individuals.

Version conflict between XE's ODP and VS2005/ODT's ODP

Suppose you've just built an application with VS2005, .NET Framework 2.0, and Oracle Developer Tools for Visual Studio .NET with Oracle10g Release 2 ODAC 10.2.0.2.20 which uses Oracle.DataAccess.dll version 2.102.2.20. You want to be able to run the application on a client machine that has an Oracle XE database installed locally. Perhaps you even require that the client machine runs the Oracle XE Client. Unfortunately, even with both there seems to be a version conflict regarding Oracle.DataAccess.dll. Can anyone say what are the best practices for such a situation?

Situation:
1) Oracle XE (database with/without client) installs with the following two files in the <ORACLEXE_SERVER_HOME>/BIN directory:
Oracle.DataAccess.dll v10.2.0.100 (for .NET Framework 1.0)
OraOps10.dll v10.2.0.100 (for .NET Framework 1.0)
2) Applications built with VS2005, .NET Framework 2.0, and Oracle Developer Tools for Visual Studio .NET with Oracle10g Release 2 ODAC 10.2.0.2.20 use Oracle.DataAccess.dll v2.102.2.20 (for .NET Framework 2.0).
3) The client machine will be missing the following two files vital to the application: Oracle.DataAccess.dll v2.102.2.20 (for .NET Framework 2.0), OraOps10w.dll v2.102.2.20 (for .NET Framework 2.0). These two files can be found on the development machine in the <ORACLE_ODAC HOME>/odp.net/bin/2.x and <ORACLEODAC _HOME>/bin directories, respectively.
Action:
When installing the application on the client's machine, place copies of the two missing files into the client's <ORACLEXE_SERVER_HOME>/BIN directory, overwriting the existing Oracle.DataAccess.dll v10.2.0.100 (for .NET Framework 1.0).
Result:
The application performs as expected.
My immediate concern is that the client may object to replacing the existing Oracle.DataAccess.dll v10.2.0.100 (for .NET Framework 1.0). What are the best practices for such a situation?

XI 3.0 Version Conflict after SP 10 import

Similar Messages

Maybe you are looking for