XI 3 File to IDoc scenario - Still referencing Old Logical system

Hi
Dont know if you can help. I have a file to idoc scenario using XI 3 to R/3 4.6c system.
I had the interface working from a third party system XMLHUB to SAP R/3. The Logical system name for the XMLHUB was XMLHUB01 in the SLD which I have set up as a partner profile in R/3. I have recently changed the logical system name to XMLHUBDEV01 in the SLD and created that logical system in R/3 and changed the partner profile to XMLHUBDEV01.
Unfortunately in the sender information of the IDoc the partner number is still XMLHUB01 and not XMLHUBDEV01. I don't understand where this partner is sent from to get into the control record of the IDoc.
I have cleared the SLD cache in both the Repository and the directory. Is there somewhere else I should be looking? Any help would be appreciated.
Regards
Daniel

hi daniel...
this thread wud answer ur query....
Re: IDOC Payload
regards..
vishal

Similar Messages

File to idoc scenario . how to create logical system

logical system asking user authorization what should i do.
what should be logical for whic we should degine partner profiles
apoclnt800 or xi7clnt001

Hi,
The partner profile to be maintained in we20 (in backend systems -ECC/CRM etc) should be based on logical system for the sender.
For ex: Src (File) -> PI -> Tgt(ECC)
In SLD you have created Technical System(TS) and Business System(say BS) for Src. Also a Logical System name (Say LSNAME) is associated with BS.
In ECC, goto tcode - sale, create a logical system of name LSNAME. Now goto we20 and create a partner profile of name LSNAME. Provide the message type of Idoc in the required place.
Souvik

Where to define third party logical system name in file to idoc scenario

Hi Friends,
I am shalini shah.
I have one doubt, where I can define the logical system name in File to Idoc scenario.
I created Logical system for R/3 system in SALE t.code, but where to define the Third party logical system ,
In SALE or any where.
Please give me solution.
Warm Regards,
Shalini Shah

Hi Shalini,
You need to create Business system in SLD and import the business system in ID.Then u will start with the configuration.
Just refer the below link for configurations with step by step solution.
File To IDOC - Part1 (SLD and Design):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC&
File To IDOC - Part2 (Configuration):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part2+(Configuration)&
File To IDOC - Part3 (Steps required in XI and R3):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part3(StepsrequiredinXIandR3)&
Thnx
Chirag

Regarding RFC connection in File to IDOC Scenario

Hi everyone,
I was configuring file to Idoc Scenario, i have made all the required configurations in SLD, IR and ID, in XI system and in R/3 System. i have created RFC connection from XI to R/3 system, and its working fine. i have created an Partner profile in WE20 with sender file system name with inbound parameters. But still i am getting error as EDI Partner Profile not defined in WE05- iDOC ADDED WITH ERRORS. Do we need to create an RFC connection from R/3 system to XI for file to Idoc Scenario
!!! Note: RFC connection from R/3 system to XI is not working, will this be a problem for file to idoc scenario. !!!
Regards,
Varun Reddy.K

Hi Varun
Follow these steps
First - Maintain the Sender R/3 System:
SM59 : Create a RFC destination to XI
WE21 : Create a TRFC Port ->Specify the RFC Destination Created
BD54 : Create a Logical System for the Idoc Receiver
WE20 : Create Partner Profile ->Maintain Outbound and the Inbound Parameters
Second - Log on to XI System:
SM59 : RFC Destination for Sender System
IDX1 : Create the port to get Idoc Metadata from Sender System ( The Port Name must match the port name in the idoc header - Usually in format SAP<System ID>. eg. SAPID1 [Optional Step. Not mandatory]
IDX2 : Maintain the Idoc Metadata. This is needed only by XI, and not by other SAP systems. IDX2 is needed because XI needs to construct IDoc-XML from the IDoc. No other SAP system needs to do that.
Regards,
Santosh

Error in File-PI-Idoc scenario

Dear All,
While working on File-PI-Idoc scenario, I am getting the error as
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">UNAUTHORIZED</SAP:Code>
<SAP:P1>401</SAP:P1>
<SAP:P2>Unauthorized</SAP:P2>
<SAP:P3>(See attachment HTMLError for details)</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I have checked various other posts on the same error but still I am not able to resolve this.
Please help me in resolving this error.
reg,
nj

Nishu,
Please check whether you have assigned the following roles to the particular user you are using for data communication.
Roles:
SAP_XI_IS_SERV_USER,
SAP_XI_APPL_SERV_USER
Regards,
Sugata

File to IDoc Scenario: Idoc Status 50

Hello,
I have a problem in doing a File to IDoc Scenario with a simple XML file mapped to IDoc "CREMAS.CREMAS03". In the beginning, I got a status 56:"IDoc with errors added". Then I added a logical system (LS name of my sender)manually in "Display IMG";however, it didn't work. So I simply changed the logical system name of my sender to XI_00_800 which already exists in R/3. I tried the scenario again, then I got the status 50:"IDoc added". Looked like the IDoc still hadn't been correctly inserted as a record. May I ask what other steps or configurations do I need to do to get this scenario to work? Thank you.

Steve,
Moreover, I didn't create any partner profile. The "XI_00_800" partner profile is in the system all along. Should I create a whole new partner profile and point that to my sender business system?
You need not create it once again as it already exists. Normally , ALE configurations on an R3 system are the responsibiltis of the Functional Team. For instance , on our projects we are never given access to the End r3 systems and the Partner profile are created by the F'nal team itself.
Like I mentioned, ask your F'nal team why you are getting this issue. From XI side , there is nothing more you need to do.
Regards,
Bhavesh

Trouble shooting File to Idoc scenario: wrong Idoc structure in target

Hi All,
             I am working in an file to idoc scenario. Now the scenario is running but the idoc I am sending from SAP XI is not matching with one received in SAP R/3 system. This is not a new scenario. The scenario was already existing. I have done structural changes in Idoc structure and re-imported it in SAP XI. When the iodoc reaches SAP R/3 system I check its structure and data content. 4 of its fields are missing all 4 were newly added fields. Data from some fields are getting merged into one field within Idoc. data from one field is moving onto other fields in target. I have refreshed the metadata using IDX2 transcation within SAP XI but still getting same result.

Hi All,
I am able to see the changed idoc structure in IR. I have also tried cache refresh. I am trying to explain my problem once again with example.
Source Idoc in XI
      fieldname                            data
       f1                                       d1
       f2                                       d2
       f3                                       d33
       f4                                       d4
       f5                                       d5
Idoc structure received in SAP R/3 system. I am seeing through we02 transcation, inbound idoc
      fieldname                            data
       f1                                       d1
       f2                                       d2
       f4                                       d33d4
I have tried cache refresh, IDx2 metadata refresh, but no improvement of the situation.

Message has error status at outbound side File To Idoc Scenario

hi ,
In my File to Idoc scenario , when i go to sxmb_moni , i found that its showing red flag at Outbound Status Tab and showing message "Message has error status at outbound side".
When i go to IDX5 and and select my idoc and click on Transaction Id it shows "Password logon no longer possible - too many faile" .
Please suggest what may be the problem ?
Regards,
Rohit

1. First check the RFC destination name used in receiver Idoc adapter communication channel.
2. As i said earlier, in sm59 transaction in XI gui, u can check same rfc destination under type 3. There check the logon credentials and the username.
3. Now goto the R3 system GUI and check in su01 that same user is locked or not. If locked unlock it.
4. And if u change the password of that user, then do the similar change in XI -> sm59 -> rfc destination logon credential
Regards,
Prateek

Error in File to IDOC Scenario

Hi,
I have File to IDOC scenario.
I am getting error in sender file channel.
"Conversion initialization failed: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Mandatory parameter 'xml.keyfieldName': no value found "
Although I have used this parameter in content conversion 'xml.keyfieldName' (for each sub structure and defined a key field).
Despite of this error in sender channel I am receiving the message in XI.
But in XI also it throws error :
"Unable to convert the sender service PG_TOM_CEEMEA_RU_SFA to an ALE logical system"
Any help on this ?
Thanks,
Vikas

Hello Vikas,
I am getting error in sender file channel.
"Conversion initialization failed: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Mandatory parameter 'xml.keyfieldName': no value found "
Although I have used this parameter in content conversion 'xml.keyfieldName' (for each sub structure and defined a key field).
Check your flat file structure whether the key field you have chosen is appropriate and also recheck the FCC details whether you have assigned the value for the key field i.e. keyFieldValue.
"Unable to convert the sender service PG_TOM_CEEMEA_RU_SFA to an ALE logical system"
regarding the above error refer this
https://wiki.sdn.sap.com/wiki/display/XI/Unable%20to%20convert%20Sender%20system%20to%20ALE%20logical%20system
Regards,
Prasanna

Error while doing a File to IDOC scenario

Hi Experts,
I have created a File to IDOC scenario where in i have sent a file which has to pass data to ABSEN1 IDOC.I could see the IDOC reaching R/3 ,but with the status 56: "EDI: Partner profile inbound not available"
I have checked with all the configurations and couldnt find where it went wrong.
Kindly help me in this regard.
Thanks.

Hi
Check the inbound parameter and the process code.
To find Process code for IDoc use Tcode WE42.
ALE idoc trouble shooting use
Troubleshooting of ALE Process
look also this configuration
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6bd6f69a-0701-0010-a88b-adbb6ee89b34

How to handle the control records in case of file to idoc scenario.

Hi All,
can you please clarify me how to handle the control records in case of file to idoc scenario.

Hi,
In File to Idoc scenario even though you selected apply control record values from payload and you are not getting those correct values which you have provided in the mapping.
Also check the checkboxes Take sender from payload and Take receiver from payload along with the Apply control record values from payload checkbox
Regards
Seshagiri

About FILE to IDOC scenario

Hi Experts,
i need some help for doing file to idoc scenario.
1. what are the configurations we must do while doing this scenario?
2. How to communicate with Legacy system to sap system?
3. How to create the business and logical systems for SAP systems in SLD?
4. How to define parameters in communcation in ID?
5. what work shold be done using SM59 and WE20? and specify the steps please?
6. finally if u having word file please send from the creation of logical system for sap system?
thanx.

Go thru below mentioned links.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/73527b2c-0501-0010-5398-c4ac372c9692
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6bd6f69a-0701-0010-a88b-adbb6ee89b34
once you go thru them you will find answers for questions.
thanks,
Venkat

File to IDOC scenario-no messages in SXMB_MONI

Hi all,
 I know this is asked so many times ,I checked some links but couldn;t find out the gap where it happened.
I am doing a File to IDOC scenario through XI mapping.
I am not getting any messages in SXMB_MONI.
When I check Communication Channel monitering in Runtime Workbench, it shows processing successfully, then it should generate messages in SXMB_MONI and intimate whether the scenario created is correct or not right!
Please help.
My scenario goes like this:
Sender : Business service(Some file location)
Used File adapter for sender communication channnel.
Receiver : Business system(SAP R/3)
Used IDOC Adapter for receiver communication channel.
One more thing is,do I need to create logical system for Business service also?If so, where do I maintain it?(In SAP R/3 or in XI system?)
Till now,I maintained my XI system as logical system in WE20 and I didn't create any logical system for business service in any system.Does it create main problem?

Hi , I am able to poll the files from file location now.and I am receiving IDOC into SAP R/3 with status 56.I already created partner for file path as a logical system and assigned inbound parameters with respective message type . Even the status shows :
An inbound partner profile could not be found with the following key:
/LSDEMO/LS//DEBMAS////
This involves the key fields of table EDP21:
-SNDPRN partner number of sender
-SNDPRT partner type of sender
-SNDPFC partner function of sender
-MESTYP logical message type
-MESCOD logical message code
-MESFCT logical message function
-TEST test flag
I already manitained following data and there is one record in EDP21.
SNDPRN = LSDEMO
SNDPRT = LS
SNDPFC = LS
MESTYP = DEBMAS
MESCOD = space
MESFCT = space
TEST = space
EVCODE = DEBM
SYNCHK = X
METHOD = space
USRTYP = space
USRLNG = space
INMOD = space
DCART = space
And please let me know whether I have to maintain outbound parameters also for my partner in XI system.I didn't see any difference even I maintained it.
And my IDOC takes another port rather than I mentioned in my SNDPRN(sender port) of my IDOC control record in message mapping.Let me know whether it's mandatory to maintain port name with SAP<XXX>convension,because IDOC in R/3 is picking the port with that naming convension.
Edited by: Jaya on Feb 26, 2010 10:17 AM
Edited by: Jaya on Feb 26, 2010 10:27 AM

Reg:file to idoc scenario

In a file-xi-idoc scenario i created a business service for legacy
system and a business system for R/3 receiver system
i didn't assign logical system for the sender business service
and assigned a logical system for the reciver business system
so while maintaining partner profile in the R/3 system
i have to give partner no:
partner type:
here the problem is my sender business service i didn't assign any logical system,and it is not of LS type
so then what do i need to give in the above two fields?
answers required briefly

Hello,
you know this pdf:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c09b775e-e56e-2910-1187-d8eba09c7a4a
Could be helpful.
Regards
Patrick

Partner Profile for file to IDOC scenario

Hi experts,
I am doing file to Idoc scenario. I did the ALE configuration steps between XI and r/3. For sender (ThirdParty) system, I defined Business system. While defining partner profiles in WE20 I got confused, whether to Give XI logical system Name or Third party logical system name. Please clarify..........
Thanks
Manoj

Hi,
>>I defined Business system. While defining partner profiles in WE20 I got confused, whether to Give XI logical system Name or Third party logical system name. Please clarify..........
in most cases you will only use one logical system in WE20
this will be XI's logical system - and you can route all the traffic
via this logicail system - this is the most popular case
for more about IDOCs and XI have a look at my book:
Mastering IDoc Business Scenarios with the SAP XI
http://www.sap-press.com/product.cfm?account=&product=H1935
Regards,
Michal Krawczyk
http://mypigenie.com - XI/PI FAQ

XI 3 File to IDoc scenario - Still referencing Old Logical system

Similar Messages

Maybe you are looking for