XI Adapter not visible in CC Monitoring

Hi all,
I have configured Receiver XI Adapter for a server ABAP proxy. When I executed the scenario, I can see the successfull message in the SXI_MONITOR. But in the receiver side its not get reflected.
So I went to the "Communication Channel Monitoring" to see the adapter status. But I couldn't find the XI adapter in that monitoring.
Can any one help me?
Regards,
Jeya Kumar.

Hi Vinod ,
We are using SP12 .
And also one more reason that u were unable to see XI adapter is that u might not have activated that adapter in your admin settings.
       I saw in JEE Admin . This Adapter is in Running mode . the parameters are
xiadapter.isconfig.username PIAFUSER
     1. May i change it to PISUPER and give password ?
     2. http://localhost:50080/sap/xi/engine?type=entry   as   xiadapter.isconfig.url
         but in CC monitoring , IE Components Test message tab i can see the url as   http://iwdfvm2160.wdf.sap.corp:51080/sap/xi/engine?type=entry
           will that port 50080 and 51080 will cause the problem ?
Thanks.,
V.Rangarajan

Similar Messages

MDM PI Adapter not visible

Hi experts!
I have deployed this files to get MDM PI Adapter:
MDMCONNECTOR08_0-20008055.SCA         Connector
MDMJ71008_1-10006189.SCA                      JAVA API
MDMADAPTER08_0-10005238.SCA              PI ADAPTER
My PI version is 7.0 SP19.
My MDM version is 7.1 SP8.
I can't view "MDM PI Adapter" in list of Communication Channels in Integration Directory.
Any idea?

Hi,
see sap help: [Installing the MDM PI Adapter |http://help.sap.com/saphelp_nwmdm71/helpdata/en/48/970f1155493987e10000000a421937/frameset.htm] and especially the part "[troubleshooting|http://help.sap.com/saphelp_nwmdm71/helpdata/en/48/9871410e0e0e27e10000000a421937/content.htm]"
And I invite you to check the oss notes on service.sap.com (use terms "MDM PI ADAPTER"), because for instance you will see these ones:
[Note 1455796 - MDM PI Adapter Compatibility|https://service.sap.com/sap/support/notes/1455796]
[Note 1614819 - MDM Adapter type not visible in PI Integration Directory|https://service.sap.com/sap/support/notes/1614819] New !
regards
mickael

T42 and LAN adapter not visible

Hi, I have a T42, which worked flawlessly until I've had to replace the HDD in my pc and installed XP SP3. Wireless works but I cannot get the LAN adapter to work. The Intel LAN adapter is NOT visible in device mgr. I have solved all the hardware conflicts from the XP install. t42-2373-C28. How can I get the hard wired LAN to work?
thanks
Bob
Solved!
Go to Solution.

I would be assuming your installed http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-4ZLNJB along with http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-62922 ? If lead_org's test does not work. Try uninstalling the ethernet driver and see if DRIVERMAX will find the driver for you. http://www.drivermax.com/ Have you also checked the Network connections to see what it says?
IT Specialist and Consultant
Lenovo Tablet Evangelist
Current Machines: IdeaCentre A300, ThinkPad Tablet, IdeaPad U410, and Yoga 3 Pro Touch
Deutsche Community Comunidad en Español
Lenovo - the latest in DOtabs, DOpads, DOcentre's, DOstations and DOservers!

XI Adapter not visible in Comm Channel Monitoring ?

Hi friends ,
I am trying a proxy scenario in Discovery System V3 .But when we create XI receiver adapter we cannot see the status of that channel in communication channel monitoring .
What could be the reason ? Any input will be appreciated
Thanks.,
V.Rangarajan

Hi Vinod ,
We are using SP12 .
And also one more reason that u were unable to see XI adapter is that u might not have activated that adapter in your admin settings.
       I saw in JEE Admin . This Adapter is in Running mode . the parameters are
xiadapter.isconfig.username PIAFUSER
     1. May i change it to PISUPER and give password ?
     2. http://localhost:50080/sap/xi/engine?type=entry   as   xiadapter.isconfig.url
         but in CC monitoring , IE Components Test message tab i can see the url as   http://iwdfvm2160.wdf.sap.corp:51080/sap/xi/engine?type=entry
           will that port 50080 and 51080 will cause the problem ?
Thanks.,
V.Rangarajan

Payload not visible in cc monitoring for SOAP-RFC synchronous AAE scenario

Hello consultants,
I have a synchronous SOAP-RFC scenario over the AAE (Java only). When I test the service in WSNAVIGATOR the response message contains an error that results in the error message:
"<s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
 <context>XIAdapter</context>
 <code>ADAPTER.JAVA_EXCEPTION</code>
 <text><![CDATA[
java.io.IOException: Parsing Error: org.xml.sax.SAXParseException: The processing instruction target matching "[xX][mM][lL]" is not allowed." the same errror is present in communication channel monitoring for the SOAP adapter.
The status in message monitoring however is succesful.
Is it possible to check the payload for the response message of the RFC call. In CC monitoring I cannot access the payload, it is not there. It does not have to be in cc monitoring, anywhere would be fine.
Since this is an AAE scenario there are no messages in SXMB_MONI.
All tips are appreciated.
Peter Jonker

Hello!
Please set the "messaging.syncMessageRemover.removeBody" parameter to "false", on the SAP XI AF Messaging Service. Use the help page below for more information.
Properties Related to the Messaging System:
http://help.sap.com/saphelp_nw04s/helpdata/EN/59/25ee41c334c717e10000000a155106/frameset.htm
Best regards,
Lucas Santos

HT3235 VGA adapter not matching up to Monitor/video port

I have an inFocus LP70+ Projector along with a Apple VGA adapter (Apple part M8639G/A). Am trying to connect it with an older iMac 8,1 desktop and finding that the Monitor/video outport does not match up to that adapter. Help?

Do you have an official Apple adapter or did you get a third-party one? If the latter, that could be the problem.

Elements 11 Preview Window not visible in dual monitor mode

When I go to dual monitor mode the preview window is hidden. I can still hear the audio from the clip but I can't see the video window. It is still hidden when I switch back to single monitor mode. The only way to bring it back is to close out the program and reopen it. Does anyone know where it goes and how to make it visible?

MAINEEDIT
I have just set up for Premiere Elements 11 Dual Monitor Mode in Windows 8 64 bit computer.
How do you have your monitors set up...Extend Across.. or other?
I am not having any problems keeping track of what I believe you are referring to as the "Preview Window". So please excuse
if I double check with you via the following screenshot.
Preview Window which can be brought up
a. double clicking the file in Project Assets
b. double clicking the file on the Expert workspace Timeline
I am going to go over this one more time with my Premiere Elements 11 and Windows 8 64 bt computer to see
if I can create the situation that I am interpreting that you have.
Thanks.
ATR
Add On...This especially makes me ask....
When I reopen the program the preview window appears in its normal position.
The Preview Window is going to close when you save/close the project. As you saying that you re-opened the project
to find the Preview Window opened?

No Wireless networks found (WIFI adapter not visible)

From 2-3 days , my laptop's wifi adapter was disabled automatically.
The wireless network doesn't showing WIFI option.
Therefore I am not able to connect to any WIFI network.
Please help

Hi @21_95,
Thank you for your inquiry.
I grasp that your wireless was automatically disabled and you are unable to enable it.
If you check Device Manager is there any errors on it?
You can check this setting also while you are in Device Manager.
Click on the network adapters to expand the list.
Right click on the wireless adapter and choose properties.
Click on the power management tab.
If allow the computer to turn off this device to save power is checked please remove it .
Repeat that process for any additional network adapters.
Here is link to HP PCs - Troubleshooting Wireless Network and Internet (Windows 8) that may also help.
As this is a recent occurrence you could test for a hardware failure of the card.
HP Notebook PCs - Testing for Hardware Failures (Windows 8)
You could also try a HP PCs - Refresh Your PC to Resolve Problems (Windows 8) which will reinstall your Windows but should not affect your files. I do suggest that you do a backup of your files just to be on the safe side.
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

AS2 adapter not visible in Receiver Communication Channel (Adapter Type)

Hi,
We wish to connect to our customer using AS2 adapter as the receiver communication channel.
We are unable to find the "AS2 adapter type in the in "adapter type" field. (Choose Adapter Metadata).
Our XI version is as following (NW04S_11_REL Service Pack 11).
Version
Service pack:
11
Release:
NW04S_11_REL
Is there add-on to be installed on XI or is there any activation required?
Thanks in Advance,
Rehan

SAP_BASIS
Release 700
Level 0011
Highest Support Package: SAPKB70011

Payload not visible in message monitor for BPMN

Hi Folks,
I am doing synchronous call from BPM (NW) and though the call is successful I am not able to see the payload for the syn Re/Response messages. In the old BPM in PI I used to check the new transaction box and I used ot see the message. Is there any similar option in BPMN to view the messages internal to BPMN?

I see the messages in Process Instance view under context Data.

Hp dv6 volume scroll not visible

hello ,,,,
i have hp dv6 1350 us notebook ....the volume scroll is not visible on my monitor the volume working but not visible plz help
This question was solved.
View Solution.

Hi,
Download and reinstall HP MediaSmart SmartMenu on the following link - note that you must have at least one other MediaSmart application already installed.
HP MediaSmart SmartMenu.
After the reinstallation has completed, restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Payload not visible in the XI monitor

In my scenario an xml message was successfully reaching its destination. The XI system was upgraded from support pack 13 to support pack 16. After that the process is still working fine as the XML message is still successfully reaching its destination. The issue we have is that the Payload is not visible in the last two steps of the monitor. We can see the Payload until Technical Routing in the monitor. But Call Adapter and Response steps do not have payload.
(TCode: SXMB_MONI)
when we double click a message we get XML message details and on the left hand side it shows following hierarchy:
XML Message:
Receiver Grouping
 - SOAP Header
 - SOAP Body
 - Payloads
Request Message Mapping
 - SOAP Header
 - SOAP Body
 - Payloads
Technical Routing
 - SOAP Header
 - SOAP Body
 - Payloads
Call Adapter
 - SOAP Header
 - SOAP Body
(( No Payload displayed, but present above!! ))
Response
 - SOAP Header
 - SOAP Body
(( No Payload displayed, but present above!! ))
Any suggestions would be highly appreciated!
Thanks in advance.
Faiq

Hi faiq
This seems to be the normal behaviour starting with SP13 or 14. There was a discussion about this a while ago and I believe it turned out to be works as designed.
This is what was posted as final conclusion in Re: SXMB_MONI does not show payload after upgrade to SP15:
According to SAP (OSS) this is working as designed. Apparently it was an error in the past that the payload was stored in the DB on the ABAP (IE) side when the AE is involved, as it would then be stored twice at DB level. This explains why this is not a problem when e.g. the IDOC adapter is used.
Anyway, the only way to let the system show the payload in SXI_MONITOR is to set the runtime trace level to 3 (full trace) and parameter logging to 1 (trace switched on).
regards,
Peter

Message processing not visible in RWB Message monitoring

Hi Experts,
There is an issue where messages are visible at ABAP Stack(SXMB_MONI).But same messages are not visible at RWB Message monitoring Integration server(IE and AE) Level.
Previously adapter status for this scenarios was Inactive in integration directory we taught this could be the issue and made adapter status active in Integration Directory. This did not solve the issue.
When payload is taken and processed from test message tab under RWB-Component monitoring-Integration Engine.
Messages are visible in RWB Message monitoring.
Experts could you please help in finding out what could be the issue,Please let me know if any additional information is required,
Thanks in Advacne,
Seshu.K

There is an issue where messages are visible at ABAP Stack(SXMB_MONI).But same messages are not visible at RWB Message monitoring Integration server(IE and AE) Level.
Check if you have chosen the Status filter as ALL and not "Error".
If you are loking for old messages, then you will not be able to see succesful messages beyond a particular period in the past, since all the succesful messages would have been archived.
To see such messages, you have to choose, the option, show message from "Archive" and not "Database".

Adapter Engine not visible in RWB

Hi Guys,
         I coudnt find the Adapter engine in Component Monitoring and Message monitoring in RWB.
while displaying the components of Integration Engine getting the below error. I am using PI 7.1
Kindly let me know where to check if the components are not visible in RWB.
java.lang.NullPointerException:
     at com.sap.aii.mdt.web.MonitorDynPage.setNewComponent(MonitorDynPage.java:635)
     at com.sap.aii.mdt.web.MonitorDynPage.process_go_button(MonitorDynPage.java:496)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.sapportals.htmlb.page.DynPage.doProcessCurrentEvent(DynPage.java:172)
     at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:102)
     at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:62)
     at com.sapportals.htmlb.page.PageProcessorServlet.doPost(PageProcessorServlet.java:22)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:66)
     at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:32)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:431)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:289)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:376)
     at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:85)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:160)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:67)
     at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
     at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
     at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
     at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:295)
     at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.run(Processor.java:222)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:152)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:247)
With Regards
Pradeep N

Check page 129 of this document:
[SAP XI TroubleShooting Guide|https://websmp109.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000659947&_OBJECT=011000358700005909032005E]

CCMS alert monitoring data for ORACLE is not visible in Central system

Hello,
I have installed sapccm4x agents in the CI of the Satellite System and it shows in the Central System as sucessfully registered under Agents for remote System and the RFC Connection test is also successfull. When i check in RZ20 in Central System not all the predefined monitors are visible of the Satellite System in the Central System and mainly the MTE element ORACLE. The database,CI and other instances on the Satellite System are installed on separate hardware. As said the database is installed not with the CI but a standalone.
Please let us know what needs to be configured in order to get the MTE element of ORACLE to show in the Central System.
Thanks,
Vinod Meno

Bhudev,
Thanks for the quick respose..
1.Sapccmsr agent is installed on Java standalone server and it has been sucessfully registered and running and we can grep the process to see its state as well as in the Central System i can see under ccms agents for remote systems it shows and the RFC connection test is also sucessfull.
2.Yes we are sending the data from the DB to CI first,but we also want the data visible in the Central System mainly for the MTE element Oracle.The filesystem of the Satellite Systems shows up in the Central System but i am intrested to capture the MTE element Oracle since we plan to monitor the tablespaces threhold .
I am thinking of opening an SAP message but i am trying to see if i can get some info that can give me the result.
Regards,
Vinod Menon

XI Adapter not visible in CC Monitoring

Similar Messages

Maybe you are looking for