XI Adapter reciever configuration

Hi please help me to
what need to filled for the path prefix as i am using file to proxy interface, and my target is SAP ecc 6.0
i dont know what to filled there
will any please help me
Thanking you
Sridhar

HI ,
Rather you can use HTTP Destination in Addressing Type parameter and put the HTTP RFC destination mainatined in SM59.
Check the link for more detail.  How do you activate ABAP Proxies?
Thanks!
Edited by: sudhir tiwari on Nov 12, 2008 8:30 AM

Similar Messages

  • URL For J2SE Adapter Engine Configuration

    Hi All,
    I have to go for adapter configuration for that i need to go to Adapter Engine Configuration Screen. So can any one please tell me the URL for going to the particular screen.
    Regards,
    Rahul

    Hi rahul,
      I think URL for J2SE adapter engine is http://hostname:portname. Just check following link :
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/6f/246b3de666930fe10000000a114084/frameset.htm">J2SE ADAPTER ENGINE</a>
    Regards,
    Keith.

  • XI error: adapter.file.configuration.DynamicConfigurationException

    Hi all,
    I have an scenary of file process between an NFS and an a FTP server.
    I need these files will conserve these original names, so it's configured with "Adapter-Specific Message Attributes" Options ticked:
    X-> Use Adapter Specific Message Attributes
    X-> Fail if Adapter Specific message attributes missing
    X-> File Name
    <b>The error at communication channel monitoring it's:
         Could not process due to error: com.sap.aii.adapter.file.configuration.DynamicConfigurationException: The Adapter Message Property 'FileName' was configured as mandatory element, but there is no 'DynamicConfiguration' element in the XI Message header</b>
    Any ideas?
    I had another interface, with similar CC (the fail one it's a copy of this that goes OK) and it's working fine.
    Thanks in advance for your help

    Hi,
    i am working on MQ-XI-file Scenario.
    i use jms send adapter and receive the file with file reveive adapter.
    in the receive file adapter i set Adapter-Specific message attributes.
    but i get the error in the communication channel monitoring:
    The Adapter Message Property 'FileName' was configured as mandatory element, but was not supplied in the XI Message Header.
    Any one know what shoud i do with the jms send adapter?

  • BizTalk Runtime configuration error - "Creation of Adapter FILE Configuration Store entries failed"

    Hi,
    I am trying to install Biztalk Server 2006 R2 on a Vista Ultimate
    edition machine. I completed the installation successfully, and have
    configured "Enterprise SSO" and "Group" features. I am getting the
    following error while configuring the BizTalk Runtime feature.
    "Creation of Adapter FILE Configuration Store entries failed.
    The SSO system is currently disabled."
    I have already done/tried the following:
    1. I tried different settings - Inprocess only, Inprocess and
    isolated, each trusted, each with a regular user account and each with
    an administrator user account. In all cases I get the same error.
    2. I have made the changes suggested here (related to rpc
    authentication changes after Windows XP SP2) but it still doesnt
    change anything: http://blogs.msdn.com/scottwoo/archive/2004/05/19/135453.aspx
    Any suggestions?
    Thanks in advance,
    Anand

    I'm having a similar installation error on an XP SP2 box and was getting the same error message (Creation of Adapter FILE Configuration Store entries failed. The SSO system is currently disabled.).  I checked and the Enterprise SSO application is not appearing in the list of services, and doing a command line "net start ENTSSO" returns an invalid service error.
    So going on the theory that SSO did not install correctly and get registered as a server, I went ahead and uninstalled BizTalk/SSO, blew away BTS/SSO databases, and tried to reinstall (selected all options for install).
    After BizTalk installed, I entered a local admin account and chose "Custom" installation.  Because the error message pointed at an SSO problem, I tried to apply the SSO configuration ONLY, using the default SSO Administrator/Affiliate Administrator accounts with the default admin account, but it keeps failiing at the same point in the install log when it tries to start SSO (see log below).
    [10:30:51 AM Info ConfigHelper]  Creating service: ENTSSO, start type: 2, exe: "C:\Program Files\Common Files\Enterprise Single Sign-On\ENTSSO.exe", dependencies: RPCSS,COMSysApp,MSSQLSERVER, account: .\bizservice
    [10:30:51 AM Info ConfigHelper] bizservice is a local entity.
    [10:30:52 AM Info ConfigHelper]  Created service: ENTSSO
    [10:30:52 AM Info SSOServerCfg] (ssoconfigobj2.cpp:7370) CSSOServerCfg::ConfigureSCP
    [10:30:52 AM Info SSOServerCfg] (ssoconfigobj2.cpp:7445) NetScheduleJobAdd: nRc = 00000000, dwJobId = 1
    [10:30:52 AM Info SSOServerCfg] (ssoconfigobj2.cpp:5697) CSSOServerCfg:tartService
    [10:30:52 AM Info SSOServerCfg] (ssoconfigobj2.cpp:5721) The SSO service is starting.
    [10:30:52 AM Info SSOServerCfg] (ssoconfigobj2.cpp:5852) ENTER: CSSOServerCfg::WaitServiceState
    [10:30:52 AM Info SSOServerCfg] (ssoconfigobj2.cpp:5892) The SSO service state is: The service is starting (SERVICE_START_PENDING)
    [10:30:53 AM Info SSOServerCfg] (ssoconfigobj2.cpp:5892) The SSO service state is: The service is not running (SERVICE_STOPPED)
    The SSO database does get created, but the SSO Administrators and SSO Affiliate Administrators local groups do not.
    So my theory here is that for some reason SSO cannot start, the exception is caught and the app rolls back.
    Any ideas?

  • How can a JMS adapter be configured in BPEL to consume messages from multiple queues ?

    How can a JMS adapter be configured in BPEL to consume messages from multiple queues ?

    If you want to use JMS with AQ as datastore then there is some configuration you need to do to enable this. This is outside SOA Suite per sa, e.g. no adapter required.
    If you want to connect to the AQ direct then use the AQ adapter.
    this blog may be of some help understand the configuration
    http://biemond.blogspot.com/2008/01/oracle-jms-with-esb-and-bpel.html
    cheers
    James

  • HTTP receiver adapter: dynamic configuration

    I was told that if I have a URL and some parameters, I can use a sync HTTP receiver adapter to call a site.
    I know this can be done using some kind of dynamic configuration, but I am not familiar with this adapter.
    The most important question here is that I need to know if this can be done throw PI, so my question is:
    Is there a parameter limit in the HTTP adapter? If so, what is the quantity of parameters that I can give to the adapter?

    for the ASMA parameters you can use for the HTTP receiver adapter check
    Configuring the Receiver Plain HTTP Adapter - http://help.sap.com/saphelp_nw04/helpdata/en/43/64dbb0af9f30b4e10000000a11466f/frameset.htm

  • No SuchAgorithmException in Adapter Module configured EAR file

    Dear All,
    I have created an adapter module using 3DES encryption/decryption algorithm for File/FTP adapter configuration and have deployed it at J2EE server of respective XI system.
    The alogorithm and adapter module are working fine in DEV & QA environments but in Mirror system(which is similar to Prod), I have been encountering Error:-
    <i><b>java.security.NosuchAlgorithmException: Algorithm DESede not available</b></i>
    Can you please suggest what could be issue here? Any inputs will be highly appreciated.
    Thanks and Best Regards
    Prashant Rajani

    Hi
    see the below links
    http://help.sap.com/saphelp_nw04/helpdata/en/0d/d517412797f523e10000000a155106/frameset.htm
    CJS-20030  Checking if the secure store exists fails,
    SHA-1 MessageDigest not available during WebAS Java install
    /thread/12191 [original link is broken]
    /thread/11521 [original link is broken]
    verify url secKey
    Regards
    Chilla

  • File Adapter-Module configuration

    Hi All,
    I have the following requiremnt.
    "Duplicate files should not process"
    Following are the File Access Parameters.
    Source Directory: ABC (ex: contains aa1,aa2,aa3,aa4 files)
    Filename: *
    File name mask: aa*
    My doubt is if they place aa1 file again in ftp , i should not process.
    For this I'm thinking to write module configuration.
    Can any one suggests , whether this is the correct approach? If it is could u explain how to write this module and where to write this module and how to import in xI, do i need to pass any parameter name in module configuration.
    Regards,
    venu.

    Hi Venu,
    You can go with Module in the Sender File Adapter.
    First you need to check the file name and you need to store this file name in the Database.( you can use Java Database).
    If there is an entry in the database for that file, then reject the whole file as per the business requirement. So that you can avoid , overhead of Mapping. Because if there is an error set the flag in the message and check this flag in your Receiver Determination, if it is an error send into error directory.
    Another way is outside the XI, i.e using shell scripts.
    Regards,
    Moorthy

  • Bad adapter engine configuration - File Sender scenery doesn't work

    In file sender scenery, the adapter doesnu2019t pass any message to the Integration Engine.
    When I take a look to the communication channel monitoring it shows the channel with status OK (Green). But when I look into the audit log of the incoming message I see the following error:
    Received XI System Error. ErrorCode: INBOUND_BINDING_ERROR ErrorText:   ErrorStack: Error in sender agreement for party , service VLTEST, interface namespace urn:damm.es:vialactea:logistica, interface oa_SimpleLine No sender agreement found for , , , , ,
    The sender agreement exists in the Directory and the status of the cache is OK.
    But in the Message Data I see this End Point URL: http://asrmd:8082/sap/xi/engine/?type=entry
    This is adapter is attached to a development system instance number 80 and the port of the above URL is a reference to the TEST system instance number 82. I investigate this issue but I canu2019t find where the miss-configuration is causing this bad End Point.
    Have anybody an idea about this problem. Itu2019s the first time I found this kind of miss-configuration.
    All other adapters are working fine. The file receiver adapter is working fine too.
    Thanks in advanced.

    Hi Sergi,
    Now is clear. Sorry but I didn´t see your posts properly. I didn't move the cross bar until the final.
    So now I change my point of view.
    Go to Runtime Workbech --> Component Monitoring --> Integration Engine --> Test Message. Which URL is displayed here? is it right?
    If don't, effectively you have wrong configured your URL of the Integration Engine.
    Go to SLD --> Business Systems --> Select your XI business System. At the Integration Configuration tag check the URL, if it is wrong, change it and save the changes. Remember that the rol must be Integration Server.
    Refresh the caches.
    Hope it is usefull.
    Carlos

  • PI SFTP RECEIVER ADAPTER MODULE CONFIGURATION

    Hi,
    I am new in SFTP adapter. I want to transfer file from proxy to SFTP. I want to output file is in csv format. But now it is in  xml format.
    Please help me!!!
    My module configuration is in attachment..

    Hi
    I have got the problem. You have to modify your target structure in the below format
    <row>
    <column-name1>ABC</column-name1>
    <column-name2>12345</column-name2>
    <column-name3>Text1</column-name3>
    </row>
    Create any parent node and inside that create the sub-eliment STATUS and USERID
    something like
    MT_Succefactor
       <record>
       <STATUS>
       <USERID>
        </record
    Then you will get the desired output. Use the below content conversion paramters

  • Adapter module configuration

    The message that reaches the file receiver channel is
    <EDI_DC40>
                  structure1
    </EDI_DC40>
    <EK1NA1M>
                  structure 2
    </EK1NA1M>
                 So i wanna write a module configuration which will rename the first tag as <ek1na1m>. Plz help

    Hi Sumaya,
    you are creating the adapter module using the document i told or not...
    if you are using that document, then see in the process method you will write all your code......you will take the message as a string........then you can manipulate your string as you want - means you can rename your node..........then you can set this string as your XMLpayload.....
    Thanks,
    Rajeev Gupta

  • File Adapter dynamic configuration

    Hi,
    I would like to know how to configure location,polling frequency, file name dynamically at runtime.?
    Is there any possibility to read configuration/property file at time?
    Regards,
    Govind

    Which SOA Suite Version you are using ? You can change the directory and file details. Pls refer Re: Get File name using File Adapter Hope that will help you.

  • Whera can I find RFC adapter file configuration?

    I search for Program ID in RFC Adapter configuration but I don't find the file properties.
    Where is?
    thanks,
    mik

    Michelle -
    What verison of XI are you using?  In 2.0 the configuration file ("rfc_adapter.properties") is in the tech_adapter/configuration directory on the IS; in 3.0, the program ID (for client systems) is part of the communication channel configuration in the Integration Directory.  HTH; if not, please reply to this post with a more detailed question.
    Paul

  • Issue with Receiver MDM Adapter - Integrated Configuration

    Hi Experts,
    My scenario is I need to pick a file from PI Directory and push it into MDM Ready folder.
    The source file structure is ~ delimiter text file and at the receiving end , I need to push the same file as it is.
    At the receiving side I have used MDM Adapter.
    The issue at receiving side is:
    I am receiving file with .xml extension with the same content as of source file but my requirement is .txt file.
    Please advise on this.
    I am using SAP PI 7.31.
    P.S.- I have not used FTP at the receiver side due to some other concerns.
    Thanks,
    Vivek Jain

    Hi Amit,
    Thanks for the reply.
    Yes we had tested successfully via SOAP UI as well (forgot to mention that). We are getting back the expected response in SOAP UI without using any credentials. We got the same response when we tested it through OS commands from PI server.
    The WS is hosted by the target system and they haven't maintained any credentials at their end. So when PI is trying to access, we don't need to provide any credentials. My question is, whether the target system should keep any credentials to send the synchronous response back to PI (java stack). We have tried that as well but since there aren't any logs, we are unable to verify whether the credentials are coming correctly.
    The service interfaces are correct and PI configuration are OK. I will try the XPI inspector for logs as you have suggested.
    Thanks
    Justin

  • MDM Adapter dynamic configuration

    Hi All,
    The scenario is, PI picks up a file from ECC using sender File adapter and sends it to different MDM ports using the Receiver MDM adapter.
    The only difference in the different receiver MDM communication channels sending the data to different ports is the
    MDM Access Parameters-->Port Code.
    So we have decided to use Dynamic Configuration of the MDM communication Channel to avoid using many communication channels.
    Please help with the steps/ blogs that I can follow to do the above
    Thanks,
    NehaSingh

    Hi,
    but there is no dynamic config in MDM adapter - at least in 7.1 
    Regards,
    Michal Krawczyk

Maybe you are looking for