XI Alert Categories in CCMS alert monitor
We defined an alert category through ALRTCATDEF and we generate alerts using SALRT_CREATE_LOCAL in the Graphical and Java mapping. We would like these alerts to be visible in CCMS alert monitor in addition to XI alert inbox. We have done config specified in the SAP documentation to get the RWB alerts in CCMS alert monitor, but only the alert categories for which alert rules are defined in RWB are visible, at the moment. IS this because we dont have an alert rule for the alert categories called by SALRT_CREATE_LOCAL,we are not able to see them in CCMS? Is there a way to get around this problem and get these alerts also in the CCMS ?
HI,
See the below links may be helpful..
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - Trouble shoot alert config
/people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1 -- ccms alerts - 1
/people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2 -- ccms alerts -- 2
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3 -- ccms alerts --- 3
Regards
Chilla
Similar Messages
-
Diff b/w alert Categories and configurations
Hi Experts,
Could you please help me here, what is diff b/w Alert Categories and configurations.
Ans also what is the use of Container elements in Categories.
You ans is very helpful for me.
Thanks in Advance all.
Regards,
Madhu.Hi Madhu,
In Alert configuration alert rules are defined based on Alert Categories. So Alert Categories has defined using t code ALRTCATDEF. Container Elements fetches the appropriate dynamic message base on the container variable.
Go through the below doc:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00e97ba2-85ce-2b10-20bc-bc05cd172154?QuickLink=index&…
Regards,
Krupa -
Application Alert Categories CCMS :CEN
hello all,
I have been working on central alert configuration and have seen variety of posts on this. Thanks to SDN.
i have also seen forum posts reg. Application related alerts(RWB Alert Categories) to Central CCMS.
I have earlier configured Alerts by defining alert categories and rules through RWB and receive email over those on individual remote system.
but with Central CEN as is the architecture, i want to monitor everything through CEN. Now for this i have configured remote system to report CCMS alerts ( inc RWB Categories ) to CEN.
After this i can see in RZ20 :
Tree node of :
RWB Alert Categories : Active Alerts
|
><Alert Category Name>
.........|
.........----->No. of Active Alerts
.........----->Assigned rule ( i) <Rule_name>
Even through i can see alerts in CEN (under system alerts ) and above RWB Alert Categories goes red when an issue comes , i cant see the exact error text defined in Alert categories under this tree ?. i.e. Short text or Long text.
Any clue how to link that error text defined in Alert Categories of Remote system and rule specs to CCMS, aswell will be of great help.
KrishnaHi,
Have not had the chance to work onm CCMS , but, this link should surely help,
http://help.sap.com/saphelp_nw04/helpdata/en/e5/5d1741b393f26fe10000000a1550b0/content.htm
Regards
Bhavesh -
How to coonfigure CCMS Alerts and Alert Categories and Alert Rules
How to Configure CCMS Alerts and Alert Categories and Alert Rules....plz give detail description related to these
Hello Raja,
Can save a lot of your valuable time by telling you only about the events/errors you have to take care of.Here all about the Alert monitoring.Below I am giving the weblogs which are beautifully described about CCMS and mail alerts.
follow the weblogs one-by-one.
I hope at the end of this you may get some knowledge on Alerts.
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step XI:Alerts step-by-step. (fundamental Basic)
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i CCMS Monitoring for XI. (CCMS monitoring for XI is enough later
we configure to Adapter Engine).
/people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1 Configuring scenario specific E-mail alerts in XI-CCMS: Part-1
(This is Important)
/people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2 Configuring scenario specific E-mail alerts in XI-CCMS: Part-2
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3 Configuring scenario specific E-mail alerts in XI-CCMS: Part 3
/people/federico.babelis2/blog/2006/05/03/solution-manager-cen-and-alerting-configuration-guide-for-dummies Solution Manager CEN and Alerting configuration (Advanced)
Please reward points if it is useful...
Thanks,
Satya Kumar -
CCMS Alert Monitor (edit monitor-configuration.xml. ?)
Hi Friends
I'm trying to change the default polling time for the CCMS Alert Monitor, 5 minutes instead of 30 minutes.
In http://help.sap.com/saphelp_nwpi71/helpdata/en/e5/5d1741b393f26fe10000000a1550b0/content.htm you can read:
Accuracy
The default polling period for the monitor is 30 minutes. If you want to have shorter polling periods, you can change them in the SAP NetWeaver Administrator as follows:
1. Choose Availability and Performance Management ® Resource Monitoring ® Java System Reports (alias: /nwa/java-sys-reports).
2. Select an arbitrary Number of errors entry in the monitoring tree of the Adapter Engine (leaf node).
3. Choose Configuration in the right-hand pane.
4. Choose Edit in the dialog box that appears.
5. Change the polling period to 5 minutes, for instance.
6. Choose Save and wait until saving is finished (be patient, since this may take a while).
7. Choose Configuration Management ® Infrastructure Management ® Java Configuration Browser.
8. Choose apps ® sap.com ® com.sap.aii.af.app ® Monitoring Configurator ® monitor-configuration.xml.
9. In the xml file, change the polled-by-template period to the same value as above, for example, 5 minutes.
10. Save the modified xml file.
11. Choose Operations Management ® Infrastructure Management ® Start & Stop ® Java EE Services to restart the Monitoring service to apply the changes.
But in step 9, the xml file I've found in my PI 7.1 (SP6) is this:
<monitor-configuration>
<monitor-semantics />
<monitor-tree />
</monitor-configuration>
Also, there is no way to modify that file, you can only display it or download it.
can anyone tell me how to edit the file.
regards
rajaHi Raja,
This is the same as doing the following:
You can locate the monitor-configuration.xml file in the SDA com.sap.aii.af.app.sda (inside META-INF folder). You can find this SDA in the install directory of PI installation. In this XML file please locate and edit the following tag:
<template-info template-name="SAP_XIJ2EE_RCRDS">
<polled-by-template period="30" unit="MINUTE">
<generating-resource
name="com.sap.aii.utilxi.rtcheck.mx.standard.XIJ2EEComponentMBean" type="APPLICATION"/>
<template-attribute-mapping>
<invoked-resource-method name="getMonitoringRecords"/>
</template-attribute-mapping>
</polled-by-template>
</template-info>
Change the above to the following *************
<template-info template-name="SAP_XIJ2EE_RCRDS">
<polled-by-template period="5" unit="MINUTE">
<generating-resource
name="com.sap.aii.utilxi.rtcheck.mx.standard.XIJ2EEComponentMBean" type="APPLICATION"/>
<template-attribute-mapping>
<invoked-resource-method name="getMonitoringRecords"/>
</template-attribute-mapping>
</polled-by-template>
</template-info>
The main change is the polled-by-template value from 30 mins to 5 mins as per your req ******
Construct back the SDA (you can search SDN for that) with this edited XML and then redeploy this SDA with the help of JSPM tool.
This will re-start the PI Server for the changes to come into effect.
I hope this helps.
PS: You can consult your BASIS consultant to locate this sda and re-deploy it on PI Server.
Regards, Gaurav. -
CCMS alert on XI interface monitoring : Error status of XML Messages
Hello Everyone,
Please can anyone let me know on how we can setup ccms alert monitoring on tcode: SXMB_MONI for XML messages which are in error status. Do we have any MTE class available in XI system ?
Please share your expertise on this ..
thank you !
Regards,
Tushar Rathi
Edited by: Tushar Rathi on Mar 23, 2011 9:24 AMHello Everyone,
Please can anyone let me know on how we can setup ccms alert monitoring on tcode: SXMB_MONI for XML messages which are in error status. Do we have any MTE class available in XI system ?
Please share your expertise on this ..
thank you !
Regards,
Tushar Rathi
Edited by: Tushar Rathi on Mar 23, 2011 9:24 AM -
CCMS - Alert monitor configuration
Hi
We are configuring the CCMS Alert monitor for monitoring the R/3 systems. We are referring sap help and sap notes, but also we are looking for document which instructs the complete configuration, will be appreciated if share the same.
regards,
rajeshHi rajesh,
Have you checked the iTutor files in
http://service.sap.com/rkt --> SAP Solution Manager 4.0 --> Technology Consultants and System Administr
These are really good documents with step by step instuctions and screen
Thanks
Prince Jose -
Configuring CCMS alerts for Availablity Monitoring
Hi All,
We are in the process of configuring availablity monitoring in central system (solution Manager 7.0 with SP stack 23) to monitor all systems (ABAP,Java,Dual Stack, Trex,DMS,etc) in landscape.
As a first step, we have registered CCMS agents in monitored (ABAP) system and connected to central system (Solman)
All the required RFCu2019s have been defined for data transfer between monitored and central system
In RZ20,i could see the availablity as 100% for the defined moniored system under SAP CCMS Technical Expert Monitors>All Contexts on Local Application Server>CCMS self monitoring >CCMS agents>CCMSPING.hostname
Not sure whether above path is the place where in we look for alerts
Please clarify the below points
i) how to configure the email alerts (in RZ20) from the central system when monitored system is down
ii) the path in which I can find the alerts in RZ20 for that monitored system or how to add the monitored system incase if that doesnt exists
iii) MTE class under which analysis, auto reaction method to be assigned ?
iv). data collection method and frequency
v). Which MTE class to be used to assign the Autoreaction method (CCMS_test_mail alredy defined)
Appreciate your quick response on this
Thanks,
vadiHi All,
Thanks a lot for your reply.
Still i m having an issue in handling the RZ20 alerts managemnent
In RZ20,
i) i able to see the added monitoried system id under the node CCMS Monitor templates>Availablity & performance overview>Availablity-->monitored sys id
ii) When i click on open staus for the above node turns to green color
ii) when i click on current status the node turns to grey color
I am not sure whether the data collection is being passed since it doesnt turn red when the system is down
However the dispatching jobs are active in both CEN and monitored (000 client) systems
Appreciate your response
Thanks,
Vadi -
How to configure CCMS alert to monitor Authorization failures?
Dear All,
How to configure CCMS alert to monitor Authorization failures?
Thanks
AshokHello,
in case you have not yet set up your monitoring infrastructure, the following link will provide you with the information needed:
http://service.sap.com/monitoring
If everything is set up (Agents are installed and connected to your central monitoring system, ...) you can go to transaction RZ21, select Technical Infrastructure - Configure Central System - Assign Central Autoreactions to set up your alerts.
For the Update errors use the MTE CLass AbapErrorInUpdate. For the Lock please use the search Option.
Regards
Christian
Edited by: Christian Rose on Apr 25, 2011 7:59 PM -
How to configure Alerts with out CCMS
Hi All,
Is there any chance to configure Alert management
or just alert if u get any error in adapter Monitor or message moni. please advice me. i want to get alert mail when there is an error in adapter moni or message moni.
Thanks in Advance.
SriramHi,
Yes u can raise an alert:
For raising an alert you need to first configure the alert please follow the below weblog written by Michal Krawczyk
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
Configuration steps are: go to transaction ALRTCATDEF
1) Define Alert Category
2) Create container elements which are used for holding an error messages.
3) Recipient Determination.
Alert can be triggered in different ways.
1) Triggering by Calling a Function Module Directly.
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
2) Triggering by Calling a Function Module in the Workplace Plug-In.
3) Triggering with an Event Linkage.
4) Triggering with the Post Processing Framework (PPF) or Message Control (MC)
5) Triggering from a Workflow.
6) Triggering from CCMS with autoreaction.
7) Triggering from BPM.
/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
/people/community.user/blog/2006/10/16/simple-steps-to-get-descriptive-alerts-from-bpm-in-xi
8) Triggering alert by configuring a rule from RWB.
http://help.sap.com/saphelp_nw2004s/helpdata/en/56/d5b54020c6792ae10000000a155106/content.htm
THis will raise adapter and integration engine related errors.
Hope this will help you.
Thnx
Chirag -
What is CCMS and how to do alert configuraion using CCMS
HI All,
could anyone provide me some insight on the topic CCMS(computer center management system).The information i am looking for is :
1.What is CCMS(in very basic terms)?
2.How it is related to XI and How we configure XI for alert configutration using CCMS?
3.Related Transcation
4.How much an XI guy should know or learn about XI
5.Any useful information that i missed an worth knowing about CCMS.Hi Anika
Look at these links
The CCMS alert monitoring infrastructure is provided by SAP free of cost.
For more info: http://www.sap.com/germany/media/mc_386/ccms_monitoring_brief.pdf
Also there is one good SAP article named "CCMS Integration With XI".
http://help.sap.com/saphelp_nw2004s/helpdata/en/49/6272376d3bfa2be10000009b38f8cf/frameset.htm
CCMS for MONITORING
/people/sap.india5/blog/2005/12/06/xi-ccms-alert-monitoring-overview-and-features
XI : Configuring CCMS Monitoring for XI- Part I
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
XI : GRMG Customizing for XI CCMS Heartbeat Monitoring Part II
/people/sap.user72/blog/2005/12/05/xi-grmg-customizing-for-xi-ccms-heartbeat-monitoring-part-ii
Configuring scenario specific E-mail alerts in XI-CCMS: Part - 1
/people/aravindh.prasanna/blog
http://help.sap.com/SAPHELP_NWPI71/helpdata/EN/f0/02a63b9bb3e035e10000000a114084/content.htm
When & why need to use CCMS
When & why need to use CCMS
Regards
Abhishek -
Hi,
I am using XI 3.0, and trying to setup CCMS alert setup...
I have 2 quesitnos: first
I done XML alerts using ALRTCATDEF and create alert XDV_XML category, then RWB define add roles in there, all XML messages comes in mail which is good!!!
but when I goto RZ20 and find SAP CCMS Monitor Template and double click under "Exchange Infrastructure" its shows there but empty or disable or white color can't see anyting under that .... WHY?
2nd question; I am tyring to create CCMS alert goto RZ21 click mothod -> display overview -> select mothod CCMS_Online_Email -> copy this mothod to my name like CCMS_TRAVIS
In Execution tab -> type of call alerady select funcation module and call selected: SALO_EMAIL_IN_CASE_OF_ALERT
In Control Tab -> Periodically in dialog process (shot running program) selected
In Parameter Tab -> SENDER: my user name, RECIPIENT: my eamil address, RECIPIENT TYPE: U
In Release Tab -> selected 'auto reaction mothod'
what i do next, what kind of alerts will show there? and how? and when? and if i want show thease alert for more user how do i setup?, and why only CCMS_OnAlert_Eamil only ?,
Please can you give me answer in your words, I have lot of URL but not help full
Thanks a lotHi, there
I already have that doc. thanks a lot anyway!!! ok if I am following this doc.
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
Step 3 : Creating a System Group for SAP Exchange Infrastructure
When I goto Rz21 and click "Technical infrastructure" then "configure central system" then "maintain system group" and click "Maintain gropus" then create Groups" its asking me new entry put "ExchangeInfrastructure_Systems" now how its look like :-
System Groups for Alert Monitor
46C_Systems
620_Systems
640_Systems
700_Systems
<SYSTEMS_WATCHED_BY_4XAGENTS>
ADABAS D_Systems
CSM_Known_Systems
INFORMIX_Systems
J2EE_Systems
ORACLE_Systems
ExchangeInfrastructure_Systems (This entry has been created but under oracle_system and with not yellow folder)
Note: when I goto rz20 and click CCMS_Monitor_template it does show Exchange Infrastructure but grayedout nothing display under exchange infrastructure.... WHY?
please some advised
Thanks -
Modify Standard CCMS Alert E-Mail Text
Hi ALL,
I have configured CCMS Monitoring and its working Perfect.
Alerrt E-Mails are generated, but the Text of these E-Mail is Techno savvy and cryptic.
Is there any way I can Modify/Customize the CCMS Alert E-Mail Text.
ThanksHi,
Auto reaction methods triggered in sattelite systems are sent to client 000 and then through SMTP server to the external mailing address.
In central auto reaction methods we make use of info sent by CCMS agents to trigger an alert in the central Solman system using the custom created central auto reaction method, assigned to a specific MTE class for a satellite system.
this is the new method modified to be able to do the configurations from the central system itself instead of doing the setting in the individual satellite systems, and as it makes use of ccms agents its faster.
the configuration is same almost in both cases, just go through 455140 S-note, and follow the similar steps in solman system.
Please let me know if any problems,
Thanks,
Regards,
Kaustubh. -
hi
can anyone explain CCMS alert and how to trigger it for a scenario. is there any detailed document please send the link. thanks.
BalakrishnanHi Balakrishnan,
CCMS is SAP Computing Center Management System. RWB is smoothly integrated with CCMS and CCMS alerts can be viewed thro' the Runtime WorkBench.
First configure CCMS in XI System:-
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
For Monitoring in the CCMS:-
http://help.sap.com/saphelp_nw04/helpdata/en/4d/6272376d3bfa2be10000009b38f8cf/frameset.htm
Go thro' this link for configuration scenario:-
/people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1
I hope this helps.
Regards.
Praveen -
Hi all,
i want to know what is ccms alert monitor what is the use of it
Regards,
RaviRavi
you should read, can't be explained so generic question
http://allian.uclv.net/saphelp/helpdata/EN/c4/3a7d94505211d189550000e829fbbd/content.htm
Maybe you are looking for
-
Why is my ipod doing this please help me
-
What are Data sources for 0PUR_c10
Hi , Now iam activating BCT for 0PUR_c10 cube in BI 7.0 before activating in BI side can i know 1. what are the Data sources for can i activate in RSA5 in r/3 side for Tranastion data and master data ?for that 0PUR_c10 cube ? 2. plz tell me , what ar
-
Hello experts, I have the following Route Pattern for 18XX numbers: 91.8XX[2-9]XXXXXX When I dial a 1800 number it works but not any other such as 1866, 1877 etc. I just don't get it. Why it works for 1800 numbers and not for the other ones. Could yo
-
I had to perform an Erase and install on my iMac running Mac OS 10.5.8. Now I can't find iPhoto 8, Garage band or any of the iLife apps that came with my Mac? I Looked for them on the install disk that came with my Mac and I can't find them. Can some
-
Hi, I have upgraded to Lion and did all the software update. I use different printers in different locations (home,work, office) and I had to add any printer using System preferences. However, everytime I connect my MacBook to a printer I had been us