XI Alerting - Error Code-Descriptions

Hi to all,
I'm just about to use the XI-Alerting for application support and got the following question:
Is there any resource where to get some kind of catalogue with descriptions for all XI-Error-Codes?
Of course, most of the category/code-names are quite self-explanatory but I'd like to have sort of reliable documentation.
I found several blogs and forum-threads concerned with specific categories/codes, but was not able to find one document about the whole thing (and as there are about 350 I think, it would be quite a puzzle to gather the information).
Any idea where to find something like that?

Hi Jana,
I beleive there is no such documents that describe each and every Error category and Code. I faces the same problem while confiuring the Alerts for many interfaces.
Even I tried to find out on SAP Market place...but get nothing.
If you doing any research and will come up with any document thean please let me know also.
Thanks
Farooq.

Similar Messages

COM routine error code descriptions in SAP APO - transaction /SAPAPO/OM10

I had recently encountered a COM error in SCM APO and wasted a lot of time trying to figure out what the error code actually meant.
If you ever have this issue, you can use transaction /SAPAPO/OM10 to resolve any COM routine error message.
You can also check the message class /SAPAPO/OM_TS and possibly some other /SAPAPO/OM* message classes as well. This is where the error message descriptions are coming from.
Hope this helps.

Hello Gabor,
-> As you know, you could use the transaction /n/sapapo/om10 to Display Meaning of COM Return Code.
-> In case you got a COM error in SCM APO => to avoid a spending a lot of time trying to figure out what the error code actually meant, please, open the OSS message to the component BC-DB-LCA to get the liveCache application support from SAP on this issue.
Thank you and best regards, Natalia Khlopina

Is there a table of error code descriptions anywhere?

Keep getting an error code notice 8072 while trying to use Network share??

Start with a google search for error 8072 and peruse the many hits.

Getting error code 1 when calling SSIS package from a stored procedure (SQL Server 2008 R2)

Hello,
I am trying to execute a SSIS package from SQL Server 2008 R2 stored procedure but getting error code 1 (as per my knowledge, error code description is as below:
0 The package executed successfully.
1 The package failed.
3 The package was canceled by the user.
4 The utility was unable to locate the requested package. The package could not be found.
5 The utility was unable to load the requested package. The package could not be loaded.
6 The utility encountered an internal error of syntactic or semantic errors in the command line.
Details:
I have a stored procedure named "Execute_SSIS_Package" (see below sp) which executes 'Import_EMS_Response' SSIS package (when I execute this package directly from SQL Server BID it works fine it means package itself is correct) and calling
it from SQL as:- EXEC Execute_SSIS_Package 'Import_EMS_Response'.
Here I receives error code 1.
Can anyone help me to resolve this issue please?
Thanks in advance!
CREATE PROCEDURE [dbo].[Execute_SSIS_Package]
@strPackage nvarchar(100)
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
DECLARE @cmd VARCHAR(8000)
DECLARE @Result int
DECLARE @Environment VARCHAR(100)
SELECT @Environment = Waarde
FROM Sys_Settings
WHERE Optie = 'Omgeving'
--print @Environment
SET @strPackage = '"\W2250_NGSQLSERVER\BVT\' + @Environment + '\' + @strPackage + '"'
SET @cmd = 'dtexec /SQL ' + @strPackage + ' /SERVER "w2250\NGSQLSERVER" /Decrypt "BVT_SSIS" /CHECKPOINTING OFF /REPORTING E'
--print @cmd
EXECUTE @Result = master..xp_cmdshell @cmd, NO_OUTPUT
--print @Result
END

It has something to do with the security.
E.g. cmdshell is not enabled or the caller has not rights over the package.
There could be a syntax error, too.
I suggest you make the package runnable off a SQL Agent job then trigger the job from the stored proc with
sp_start_job <job name>
Arthur
MyBlog
Twitter

Problem Getting Error Code and Description in Alerts

We are having trouble getting the Error code and Error description in the Alerts and we're having trouble getting a alert for message mapping exceptions. I have read through the BLOGs and the help on SAP. I'm not sure it is something to do with the configuration or SP14. We did not have these problems with SP12 at our other customer XI implementations.
Background -
We have setup an "XI Alert" classification with three Alert categories -"XI_Mapping_Error", "XI_Adapter_Error", "XI_Runtime_Error".
For the "XI_Mapping_Error" alert category, we have setup a rule so that any Integration Engine Application Mapping.* Error code will create an alert. However, when we have a mapping error in XI which we can see in MONI, we do not get an alert. The checkbox for "Suppress Multiple Alerts of this Rule" is not selected. I am not sure why we're not getting the alert.
For the "XI_Adapter_Error" alert category, we have setup a rule so that any Adapter Engine * adapter type will create an alert. The alert gets created - however, some of the container variables do not get poulated in the email. We have defined Container variables pointing to the corresponding ABAP data dictionary elements - i have double checked these definitions.
Here is an alert email - the Error Code (SXMS_ERROR_CODE - SXMSERRTX) and Error Category (SXMS_ERROR_CAT - SXMSERRCAT) are not being extracted:
Alert ID: ##23896##
Error Code =
Error Category =
Message ID = 1506eab0-6125-11da-9ba2-00505685 Time = 14:26:12 Date = 29.11.2005
Sender Party =
Sender Service = BS_CPI
Sender Interface = MI_CPI_INV_RFC_REQ_ABS
Receiver Party =
Receiver Service = BS_CPI
Receiver Interface =
We are not able to figure out why the Alert framework is not working correctly. We are running XI 3.0 SP 14 on Win2K, SQL 2000.
Anyone encounter these problems? Any help would be appreciated.
Regards,
Jay Malla

>> There are some problems with SP 14 and the alert framework.
Very true! Join the team!
>> We applied Note 876546 which triggered certain alerts that were not getting triggered. However, we're not getting the Error code and Error Description in some of the alerts.
Jay, This note is specifically for a situation where the 'where did the error occur' set to No Restriction. I don't think anything else is included in this fix .01 to patch 0.9 of SPS 12 of XI 3.0!!!
My problem is that even the messageID variable is not getting replaced!!! In SP12 everything was perfect. After SP14, the errors are coming almost instantaneously to the inbox, but without any variable replacement.
Best of luck,
Kannan

I get nothing but error messages, -"Your IMAP server wants to alert you to the following: 113 that mail is not available" or 364? there are hundreds stacked up.You must give answers to how to fix these when we do "search" add the error code number

I get nothing but error messages, -
"Your IMAP server wants to alert you to the following: 113 that mail is not available" or the same with: 364?
Now there are hundreds stacked up on my desktop.
I cannot find the answer anywhere. You need to give answers to how to fix these errors because when I "search" "error code" or the number there is NOTHING. NOTHING! Yet you give us these stupid error codes
then you do not give us ANYTHING on how to fix these. These error codes make me so mad it makes me hate outlook, and hate the developers and hate microsoft. How in the world can you give us ERROR codes without the explanation of what
to do or how to fix it. You need to add each error code number in your "search" then explain what it is and how to fix it. I am not a tech. I am a lawyer. I have googled the entire string of error code and nothing is clear.
So, for the last several years, I get these error codes. Also, there is another error code that won't go away--it is the password error code that asks if I want to store the password. Yes, so I say YES. but it pops back. I am sick of this. This is the reason
I hate Microsoft and I love google. #1 they respond to error, #2 them try to fix them you do not. I paid the full price to buy the OUtlook 2010, almost $500 just to get outlook, and all I got was error codes. I could not even open it because all I would get
was that error codes and NO ONE knew how to fix them. WHAT IS YOUR PROBLEM that you cannot fix the stupid error codes that you imbed? PLEASE HELP

Hi,
I understand how frustrated you are when facing such an issue, maybe I can provide some suggestions on the problem.
Based on the description, you should be using an IMAP account setup in Outlook. As for the error message, usually it's caused by a corrupted message on the Server. I suggest you logon the Webmail site, check if sending/receiving emails works well.
If you find any unusual emails that cannot be read or sent, try deleting them to try again.
I also suggest you create a new profile to setup the IMAP account:
http://support.microsoft.com/kb/829918/en-us
Contact your Email Service Provider to get the correct and latest account settings, since you have been using Outlook for years, some settings may have been changed while you haven't been informed.
For the steps to setup an account in Outlook 2010, please refer to:
http://office.microsoft.com/en-001/outlook-help/add-or-remove-an-email-account-HA010354414.aspx
I hope this helps.
Regards,
Melon Chen
TechNet Community Support

ISE 1.1.1 - Error Code 12521 EAP-TLS failed SSL/TLS handshake after a client alert

Hello,
Has anyone come across this error code before? I have looked in the 1.1.1 troubleshooting section and there is nothing there. When I click on the link for the description off the error in ISE I get the following error:
I setup 7925 phones for EAP-TLS using MIC. I have uploaded Cisco's Root CA and Manufactoring CA Certificates and enabled "Trust for client authentication". A Certificate Profile is configured matching Common Name and is added to the Identity Sequence. I got some additional attribute information, where there is a error message:
OpenSSLErrorMessage=SSL alert code=0x233=563 ; source=remote ; type=fatal ; message="decrypt error"
Anyone know what this error means?

Yes,
That could be it see if you can follow this guide on importing the ISE self signed cert: (i used a 7921 guide but it should be similar).
http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7921g/7_0/english/administration/guide/7921cfgu.html#wp1376129
Installing the Authentication Server Root Certificate
The Authentication Server Root Certificate must be installed on the Cisco Unified Wireless IP Phone 7921G.
To install the certificate, follow these steps:
Step 1 Export the Authentication Server Root Certificate from the ACS. See Exporting Certificates from the ACS.
Step 2 Go to the phone web page and choose Certificates.
Step 3 Click Import next to the Authentication Server Root certificate.
Step 4 Restart the phone.
Thanks,
Tarik Admani
*Please rate helpful posts*

Error code want to insert in Message Body of Alert Mail

Hi All,
We had created one Process flow with 7 Mappings. The process flow looks like this:
START--->MAPA---->MAPB---------------------EMAIL_SUCCESSS -------END
EMAIL_WARNING---------END_WARNING
EMAIL_ERROR-------------END_ERROR
Suppose MAPA got failed with Warning/Error, We want to get alert mail with Map A got failed with the Error code and it want to start running MAP B..
Any suggestions?
Regards,
Ava

Can't you do something like:
START--->
MAPA--success-->MAPB---->
MAPA--error-->EMAIL_ERROR---success---->MAPB-->
MAPA--warning-->EMAIL_WARNING----success---->MAPB-->
and so on....
or FORK if it can run parallel.

How to access error description in a string from error code returned by NI-DAQ driver?

I am tring to write codes to control NI-6703 for PCI using the NI-DAQ driver for C++.
In the sample codes, it calls "NIDAQErrorHandler" to retrieve the error description and display in the pop-up message box. The method is included with header file "nideqex.h", and implemented w/ the nidex32.lib
I would like to get the error description in a string rather than getting a message box. Is there a way to do that? Am I missig something here?
I managed to find the "NIDAQEx.c" source code on the internet, but it seems like the code is outdated, and the library is NOT really compiled from it, since it does not seems to have a call to any method that will return th
e error description in a string that got used to be displayed in the message box.
Is there a method that I can call and pass a error code, which will return the error description in a string?

There is a function documented in dataacq.h called GetNIDAQErrorString that accomplishes what you would like.
Raecine Meza
NI
http://www.ni.com/ask

SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server 2012 Analysis Services." Hresult: 0x80004005 Description: "Internal error: An une

SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server 2012 Analysis Services." Hresult: 0x80004005
Description: "Internal error: An unexpected error occurred (file 'pcxmlacommon.cpp', line 43, function 'PCFault::RaiseError').
I'm getting above error in the pre- execute phase of a DFT when I'm trying to fetch data from a SSAS cube using mdx query.
I'm using OLE DB provider for connecting to cube.
I got one resolution for Error Code 0X8004005, which asked me to add 'Format= Tabular' in cube's connection string. It does not seem to work either. Can any one help me out on this???

You are probably missing an update.
I saw a MS Connect post https://connect.microsoft.com/SQLServer/feedback/details/250920/error-using-oledb-or-datareader-to-get-analysis-services-data where that suggestion was proposed as a fix, but is for an older SQL Server version.
So do there is a question if you pull data from SQL Server 2012 SSAS using SSIS 2012 (so no other build is involved).
Arthur My Blog

Failed to read description. error code 2

failed to read description. error code 2

You might check the event log for further details. if the service key folder under
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services is gone then I suspect the error message is about a different service.
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Getting CI Error while Update Job Code Description :

Hi All,
Am getting the CI error (Error saving the component interface CI_CMP_RULE_DEFN for Rate Code Defaulting Rule) while try to update the Existing Job code description. But am able to add the new job code details .
The message catlog number MESSAGE_SET_NBR=1000 AND MESSAGE_NBR=1102 is getting trigger to throw the error.
Can any one help me on which scenario this error will occur.
Regards,
Hari A

This is called in JOB_CODE_TBL SavePostChange Function Update_Jobcode_Rule.
      If (ciHasErrors(&ExceptionArray)) Then
         /* Create an error because CI was not successfully saved. */
         Error MsgGet(1000, 1102, "Message not found.", &RULE_ID);
      ElseThe code is already passed the getci, so you do have permissions to start this CI, but the save was unsuccessfull.
See if you can try to find some more loggin in the appserver or run it in trace mode the see the actual error.
Hakan

Oracle error code and description

Gurus,
Is there a distinct list of oracle error code with description(in excel or txt,csv format) , the requirement is to convert most of generic oracle messages into user defined messages and store it in a XML.
Regards
R
Edited by: Darthvader-647181 on Aug 11, 2010 8:00 AM

HareeshGhanta wrote:
Hi,
Thank you.I am looking for some additional information like Cause and Action also to be printed out.Is there any way we can achieve this.
Regards
Sounds like you are trying to re-invent the wheel.
What's wrong with the message text as supplied by oracle? Those messages are universally known and understood -- well, at least by people who actually read them vs. simply dumping them to a forum. Why would you want to obfuscate them with your own text?
As for "cause and action", if one has the error code emitted by oracle, there are boat load of web sites that already replicate the same information that oracle itself supplies:
oracle:dwdev$ oerr ora 12154
12154, 00000, "TNS:could not resolve the connect identifier specified"
// *Cause: A connection to a database or other service was requested using
// a connect identifier, and the connect identifier specified could not
// be resolved into a connect descriptor using one of the naming methods
// configured. For example, if the type of connect identifier used was a
// net service name then the net service name could not be found in a
// naming method repository, or the repository could not be
// located or reached.
// *Action:
//   - If you are using local naming (TNSNAMES.ORA file):
//      - Make sure that "TNSNAMES" is listed as one of the values of the
//        NAMES.DIRECTORY_PATH parameter in the Oracle Net profile
//        (SQLNET.ORA)
//      - Verify that a TNSNAMES.ORA file exists and is in the proper
//        directory and is accessible.
//      - Check that the net service name used as the connect identifier
//        exists in the TNSNAMES.ORA file.
//      - Make sure there are no syntax errors anywhere in the TNSNAMES.ORA
//        file. Look for unmatched parentheses or stray characters. Errors
//        in a TNSNAMES.ORA file may make it unusable.
//   - If you are using directory naming:
//      - Verify that "LDAP" is listed as one of the values of the
//        NAMES.DIRETORY_PATH parameter in the Oracle Net profile
//        (SQLNET.ORA).
//      - Verify that the LDAP directory server is up and that it is
//        accessible.
//      - Verify that the net service name or database name used as the
//        connect identifier is configured in the directory.
//      - Verify that the default context being used is correct by
//        specifying a fully qualified net service name or a full LDAP DN
//        as the connect identifier
//   - If you are using easy connect naming:
//      - Verify that "EZCONNECT" is listed as one of the values of the
//        NAMES.DIRETORY_PATH parameter in the Oracle Net profile
//        (SQLNET.ORA).
//      - Make sure the host, port and service name specified
//        are correct.
//      - Try enclosing the connect identifier in quote marks.
//   See the Oracle Net Services Administrators Guide or the Oracle
//   operating system specific guide for more information on naming.

Need descriptions for data quality error codes

I'm getting the following address error codes and I don't have the corresponding messages: F440, F441, F505. I have the descriptions for all the other codes.
Thanks,
Nathan

Nathan,
Can you tell me which data quality product you are using? If this is for International Address Correction & Encoding you can find all error codes in the Quick Reference for Views and Job-File
Products. A copy should be installed with your software. Otherwise you may locate a copy at http://help.sap.com/ > Business Objects > Data Quality > Quick Reference for Views and Job-File
Products
F440 - Insufficient input data; cannot choose between multiple street-level matches.
F441 - Insufficient input data; street level match occurred using partial-range matching.
F505 - Matched to undeliverable default record. The generated undeliverable (F505) has no ZIP+4 listed, an invalid CART, and is flagged as undeliverable.(United States)
Regards,
Bob Minard
Engineer, Technical Customer Assurance

EVENT 36888, Schannel A fatal alert was generated and sent to the remote endpoint. This may result in termination of the connection. The TLS protocol defined fatal error code is 43. The Windows SChannel error state is 252.

I keep losing my network connection for a few seconds at a time. Not a big deal unless I just spent time filling in a form and have to redo it.
Getting:
A fatal alert was generated and sent to the remote endpoint. This may result in termination of the connection. The TLS protocol defined fatal error code is 43. The Windows SChannel error state is 252. Using windows 8. I just installed the new ARRIS
TG862 provided by Comcast.
Any Ideas?
Also get the following errors in my events:
The name "WORKGROUP :1d" could not be registered on the interface with IP address 10.0.0.2. The computer with the IP address 10.0.0.3 did not allow the name to be claimed by this computer.
Realtek PCIe GBE Family Controller is disconnected from network.
Any help is appreciated

Hi,
Critical Kernel-power event ID 41 is used appear after PC restarts or randomly restarts with error
BugcheckCode listed or a cold reboot. Do you get BSOD and some dump files?
Default location is %SystemRoot%\Minidump. You can upload it to skydrive, then paste link here.
How to use Skydrive
http://www.wikihow.com/Use-SkyDrive
Kernel-PnP event ID 219: A Plug and Play device driver on your system is failing to load due to a device driver or device malfunction, you can unplug any external devices (except mouse and keyboard, but please keep the latest drivers), and
check device status in device manager, please also keep the all latest driver update of your PC.
And for error 36888, I found a similar thread, please refer to this link
http://social.technet.microsoft.com/Forums/windowsserver/en-US/4c5430f5-43f6-41b4-97d3-03cfb3efa70b/schannel-error-event-id-36888-is-there-a-way-to-identify-what-causes-schannel-to-log-error?forum=winserverDS
Regards
Yolanda
TechNet Community Support

XI Alerting - Error Code-Descriptions

Similar Messages

Maybe you are looking for