XI and R/3 Installation on One System

Hi,
I am new To XI and I want to install XI and R/3 in My Local System. Can i install both in one system (OS)? If yes, what is the minimum requirement for this?
If any one have did this, please help me.
Thanks,
Sridhar

Hi Sridhar,
Download this Doc and Fallow...
http://help.sap.com/bp_scmv150/documentation/SCM50_system_reqs.doc
Fallow the below documentation...
System Requirements for
SAP Best Practices for SCM 5.0 Scenarios
Use
The objective of this document is to help system administrators to prepare an SAP SCM system for the installation of one or more SAP Best Practices scenarios and to ensure the system setup meets the requirements for the installation.
This document does not provide information on how to set up the entire SAP SCM system, itself, but provides you with useful additional information and troubleshooting tips.
System Landscape
To install one or more of the SAP Best Practices for SCM scenarios from this CD, you should refer to the system landscape described below and compare it with your own existing system landscape as an installation prerequisite.
Please note that the support package levels indicate the minimum support package level your system landscape should have. If higher support packages exist, we recommend that you install the highest available support package.
To install and use any SAP Best Practices scenario, you must have installed an SAP R/3 and an SAP SCM system.
SCM 5.0: Complete Version
SAP SCM 5.0 contains the following business application components on one system platform:
     SAP APO 5.0
     SAP EM 5.0
     SAP ICH 5.0
The following table provides an overview of the software component details of the SAP SCM system:
Software Component     Release     Level     Highest Support Package     Short description of Software Component
SAP_BASIS     700     0007     SAPKB70007     SAP Basis Component
SAP_ABA     700     0007     SAPKA70007     Cross-Application Component
ST-PI     2005_1_700     0001     SAPKITLQI1     SAP Solution Tools Plug-In
PI_BASIS     2005_1_700     0007     SAPKIPYI77     Basis Plug-In (PI_BASIS) 2005_1_700
SAP_BW     700     0007     SAPKW70007     SAP NetWeaver BI 7.0
SAP_AP     700     0004     SAPKNA7004     SAP Application Platform 7.00
LCAPPS     2005_700     0002     SAPKIBHD02     LCAPPS 2005_700 : Add-On Installation
EA-IPPE     400     0003     SAPKGPID03     SAP iPPE (EA-IPPE) 400
SCM     500     0004     SAPKY50004     Supply Chain Management 5.0
SCM_BASIS     500     0004     SAPK-50004INSCMBASIS     SCM Basis 5.0
QIE     200     0004     SAPK-20004INQIE     Quality Inspection Engine 2.00
BI_CONT     702     0002     SAPKIBIHP2     Business Intelligence Content
Optimization Server Version:
Identifier     Version
CTM01     5.0_REL SP04, 356375
DPS01     5.0_REL SP04, 356375
CS01     5.0_REL SP04, 356375
SEQ01     5.0_REL SP04, 356375
SNP01     5.0_REL SP04, 356375
VSR01     5.0_REL SP04, 356375
Live Cache SP05 (LCA50.05, LC 7.6.00.22)
LiveCache version:     KERNEL     7.6.00   Build 022-123-119-055
DBM server version:      DBMServer 7.6.00   Build 022-123-119-055
Operating system:     SunOS
LCA version:          Module          50   Build 05
SAP APO GUI
We recommend that you install the SAP APO specific SAPGUI add-on, which is required for certain business transactions.
SAP ECC System
SAP ECC Enterprise with Extension Set 1 (for the SAP Best Practices scenario Fulfillment Visibility we used an SAP R/3 Enterprise system with Extension Set 2)
Software Component     Release     Level     Highest Support Package     Short description of Software Component
SAP_ABA     700     0007     SAPKA70007     Cross-Application Component
SAP_BASIS     700     0007     SAPKB70007     SAP Basis Component
ST-PI     2005_1_700     0001     SAPKITLQI1     SAP Solution Tools Plug-In
PI_BASIS     2005_1_700     0007     SAPKIPYJ77     PI_BASIS 2005_1_700
SAP_AP     700     0004     SAPKNA7004     SAP Application Platform
SAP_APPL     600     0004     SAPKH60004     Logistics and Accounting
EA-IPPE     400     0004     SAPKGPID04     SAP iPPE
EA-APPL     600     0004     SAPKGPAD04     SAP R/3 Enterprise Add-On PLM, SCM, Financials
FINBASIS     600     0004     SAPK-60004INFINBASIS     Fin. Basis
BP-ERP05     600V2     0000          SAP Best Practices All-in-One based on ERP 2005 (ECC 600)
SAP XI System
If you want to install the SAP Best Practices scenario Supplier Managed Inventory, Release Processing, Responsive Replenishment, Contract Manufacturing Procurement & Supply Network Inventory, Kanban-based Replenishment, you also need to implement an SAP XI system.
Software Component / PI Content     Release     Level     Highest Support Package     Short description of Software Component / PI Content
SAP_BASIS     700     0007     SAPKB70007     SAP Basis Component
Content for SAP BASIS     700     0007          XI content for SAP BASIS 7.0
Content for SCM     500     0004          XI content for SCM 5.0
Content for SCM BASIS     500     0004          XI content for SCM BASIS 5.0
Non-ABAP components, such as the Integration Builder and the Integration Repository, must also be installed and have the respective support package levels.
For uploading the content in the XI System, refer to SAP note 836200.
Checklist after the System Setup
     SCM Menu
After you have installed the SCM System, you may have to set up the menu that you want to use.
To do this, access transaction SE38 and run the report /SCMB/SM_VERS.
Choose Full Version and then, choose Execute.
     Check Planning Version 000
In your SAP SCM system, use the following path:
SAP Menu  Advanced Planning and Optimization  Master Data  Planning Version Management  Model and Version Management
Make sure that the planning version 000 Active Version is available.
If this planning version is not available, this means that the LiveCache has not been initialized. Proceed with the LiveCache initialization before you start with the installation of any SAP Best Practices scenario.
     Check that PSE services have been activated
Use transaction strust in your SCM system. All services should have a green light. If it is red, activate all of them. There is no need to reboot the system afterwards.
OPTIMIZER
1.     Checking that the Optimizer has been installed
Transaction SM59  RFC Destination  OPTSERVER_CTM01  Test Connection
If the connection cannot be established, this may be due to the following reasons:
     the Optimizer has not been installed
     an error occurred during the installation of the Optimizer
2.     Checking that the Optimizer SPs have been installed
Open transaction /SAPAPO/OPT09. The Optimizer Support Packages should be identical to the Support Packages of the SCM system.
     Ensuring that the APO relevant PI Settings are activated in SAP ECC
You have to make sure that the business transaction events are active in the SAP ECC system. Only if these events are active for the SAP APO integration, will changes to the transaction data be transferred from the SAP ECC system to the SAP APO system. This setting should have already been performed; this is just a reminder in order to avoid possible problems later on. Use the following procedure:
In your SAP ECC system, open the transaction BF11.
Confirm the message The table is cross client.
On the Change View: Application Indicator: Overview screen, check that the applications ND-APO, PI-EM and NDI are active, i.e. selected. If they are inactive, select the check box to activate them.
Choose Save and go back.
Web Communication Layer (WCL)
Ensure that the WCL is installed correctly: Usually the WCL should be connected to the client 001 of the SCM system. Use transaction /saptrx/wcl_search in the SCM system to open the WCL. If a logon pop-up appears, then the WCL is set up correctly. If the message WCL is not installed... appears, the respective set up settings should be checked and corrected, if necessary.
Additional Information
For additional information on issues such as architecture, sizing, platforms, and upgrades, refer to following page on the Service Marketplace:
alias /SCM  SCM Technology
For information on system monitoring, system administration, volume testing etc., check SAP note 572003. You can also refer to the Service Marketplace, using the alias /SCM  SCM Technology  Table of Contents  Solution Management  Best Practices for mySAP SCM Solution Management.
Thanks,
Satya Kumar..

Similar Messages

MiniWAS 6.20 AND SneakPreview 6.40 on one System

Hi,
is it possible to install both MiniWAS 6.20 AND SneakPreview 6.40 on one System ?
In the SneakPreview 6.40 help-File is says:
"If you have installed a previous version of SAP Web Application Server, you have to remove it prior to installing this edition."
I just installed miniwas 6.20 and dont want to crash it by installing sneak preview.
Any comments ?
elko

I shut down all database services (as I used a win2000 system), renamed the sapdb root directory and started a new sapdb installation with the installer from the WAS 6.40 Sneak Preview DVD. Finally you have to change the configuration settings (database id etc.).
Since I am quite new to SAP I cannot estimate if the change succeeded.
However, there might be an easy way to match your requirement:
The WAS 6.40 CeBIT distribution is available for download:
ftp://ftp.sap.com/pub/linuxlab/test_drive/
It contains both ABAP and J2EE stack on a single system. It is reported that an installation succeeds without any problems on a suse linux entreprise server. Since I am waiting for those WAS CD's I cannot give more advice now. Recent linux distributions are reported to fail. Maybe it depends on the kernel. Do not use 2.6 kernels.

SCM and CRM Multiple Clients in one system

Dear all,
I want to ask a question regarding Multiple clients in SCM 5 - IDES and CRM 5 -IDES.
I installed the system and plan to have multiple clients in a system with copying client 800 (IDES) to others.
I heard opinion that it can't possibly be done because if during the exercise the Administrator Workbench is executed it will search to the source client (800) and probably affect the exercise.
Would you mind giving me more suggestion about this?
Thank you.
Fausto

Hi Fausto,
Could you be more specific about what you need to achive?
You can always creat a new client, logon to the client and do a client copy with TCod SCCL.
If you logon to other IDES clients then You'ld overwrite the content of the client which have been pre-configured.
Check the status of the client you need to overwrite from TCod scc4.
Also to verfiy the status of the target client for TCod se06 -system change option.
Regards,
Tolulope

Installing NW CE7.1 and EP 7.0 on one machine

Hello All,
i have a question i am trying to install NW CE 7.1 and NW EP 7.0 on one windows 2003 ser machine but both are with different DBs EP with MSSQL 2005 server and CE with SAPDB. EP is based upon JDK 1.4 while NW CE 7.1 is based upon JDK 1.5. I didnt installed JDK 1.5 seperatley but i think its allready included in the package of nW CE 7.1. So installed for NW CE finished successfully (i had EP allready installed).
i am facing few probelms
1. I am not able to start diagonosis agent successfully it stays in yellow color forever. please find the snapshot of trace file at end of message.
2. I dont know the default port which will be used to access NW CE as my EP is allready installed on the
default port 50000. Can i know the default port used to access NW CE i allready tried 50001, 50002 and 50003. My EP is still working fine on 50000 port. Or does CE functionality going to be included into existing port 50000.
3. Is it even possible to install CE 7.1 and EP 7.0 on one system with different back-ends?
4. Do i need to install JDK 1.5 before starting CE 7.1 installation or its allready included?
any help will be highly appreciated.
trace file
F ********************************************************************************
F [Thr 1788] *** LOG => Instance state is "Starting the processes" (STARTING @ 0, INACTIVE).
F [Thr 1788] *** LOG => Starting nodes: runlevel 3.
F ********************************************************************************
F Starting process: C:\usr\sap\DT1\SMDA97\exe\jstart.EXE
F    arg[ 1] = -nodeId=0
F    arg[ 2] = pf=C:\usr\sap\DT1\SYS\profile\DT1_SMDA97_saptwo
F    arg[ 3] = -hostvm
F    arg[ 4] = -nodeName=smdagent
F    arg[ 5] = -file=C:\usr\sap\DT1\SMDA97\SMDAgent\smdagent.properties
F    arg[ 6] = -jvmFile=C:\usr\sap\DT1\SMDA97\work\jstart.jvm
F    arg[ 7] = -traceFile=C:\usr\sap\DT1\SMDA97\work\dev_smdagent
F    arg[ 8] = -javaOutFile=C:\usr\sap\DT1\SMDA97\work\jvm_smdagent.out
F exePath : PATH=C:\usr\sap\DT1\SMDA97\exe\sapjvm_5\bin;C:\usr\sap\DT1\SMDA97\exe;C:\sapdb\programs\bin;C:\sapdb\programs\pgm;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn;C:\Program Files (x86)\Microsoft SQL Server\90\DTS\Binn;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE;c:\Program Files\Microsoft SQL Server\90\DTS\Binn
F libPath : PATH=C:\usr\sap\DT1\SMDA97\exe\sapjvm_5\jre\bin\server;C:\usr\sap\DT1\SMDA97\exe\sapjvm_5\jre\bin;C:\usr\sap\DT1\SMDA97\j2ee\os_libs;C:\usr\sap\DT1\SMDA97\exe\sapjvm_5\bin;C:\usr\sap\DT1\SMDA97\exe;C:\sapdb\programs\bin;C:\sapdb\programs\pgm;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn;C:\Program Files (x86)\Microsoft SQL Server\90\DTS\Binn;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE;c:\Program Files\Microsoft SQL Server\90\DTS\Binn
F stdout : C:\usr\sap\DT1\SMDA97\work\std_smdagent.out
F stderr : C:\usr\sap\DT1\SMDA97\work\std_smdagent.out
F console : no
F debugger: no
F nice    : no
F ********************************************************************************
F Process SMDAgent started with pid 5860
F ********************************************************************************
F [Thr 1788] *** LOG => Process smdagent started (pid 5860).
F
F [Thr 1788] Mon May 31 22:32:06 2010
F [Thr 1788] *** LOG => Process smdagent running (pid 5860).
F [Thr 1788] *** LOG => Instance state is "All processes running" (RUNNING @ 1, ACTIVE).
F [Thr 1788] *** LOG => Process smdagent stopping (pid 5860).
F [Thr 1788] *** LOG => Instance state is "Some processes running" (RUNNING @ 0, INACTIVE).
F
F [Thr 6068] Mon May 31 22:32:06 2010
F [Thr 6068] *** LOG => Signal 13 SIGCHLD.
F [Thr 1788] *** LOG => Process smdagent stopped (pid 5860).
F [Thr 1788] *** WARNING => Node smdagent failed: result 2, exit code -11112. [sfxxnode.hpp 1005]
F ********************************************************************************
F Java process [collector] properties:
F    section name     : collector
F    config file      : C:\usr\sap\DT1\SMDA97\exe\startup.properties
F    node name        : collector
F    home directory   : C:\usr\sap\DT1\SMDA97/j2ee
F    shutdown timeout : 136000 ms
F    exit timeout     : 7000 ms
F    debuggable       : false
F    debugger active : false
F ********************************************************************************
F ********************************************************************************
F Starting process: C:\usr\sap\DT1\SMDA97\exe\jstart.EXE
F    arg[ 1] = -nodeId=1000
F    arg[ 2] = pf=C:\usr\sap\DT1\SYS\profile\DT1_SMDA97_saptwo
F    arg[ 3] = -DSAPINFO=DT1_97_collector
F    arg[ 4] = -hostvm
F    arg[ 5] = -nodeName=collector
F    arg[ 6] = -file=C:\usr\sap\DT1\SMDA97\exe\startup.properties
F    arg[ 7] = -jvmFile=C:\usr\sap\DT1\SMDA97\work\jstart.jvm
F    arg[ 8] = -traceFile=C:\usr\sap\DT1\SMDA97\work\dev_collector
F    arg[ 9] = -javaOutFile=C:\usr\sap\DT1\SMDA97\work\jvm_collector.out
F    arg[10] = -clusterId=smdagent
F    arg[11] = -exitcode
F    arg[12] = -11112
F exePath : PATH=C:\usr\sap\DT1\SMDA97\exe\sapjvm_5\bin;C:\usr\sap\DT1\SMDA97\exe;C:\sapdb\programs\bin;C:\sapdb\programs\pgm;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn;C:\Program Files (x86)\Microsoft SQL Server\90\DTS\Binn;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE;c:\Program Files\Microsoft SQL Server\90\DTS\Binn
F libPath : PATH=C:\usr\sap\DT1\SMDA97\exe\sapjvm_5\jre\bin\server;C:\usr\sap\DT1\SMDA97\exe\sapjvm_5\jre\bin;C:\usr\sap\DT1\SMDA97\j2ee\os_libs;C:\usr\sap\DT1\SMDA97\exe\sapjvm_5\bin;C:\usr\sap\DT1\SMDA97\exe;C:\sapdb\programs\bin;C:\sapdb\programs\pgm;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn;C:\Program Files (x86)\Microsoft SQL Server\90\DTS\Binn;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE;c:\Program Files\Microsoft SQL Server\90\DTS\Binn
F stdout : C:\usr\sap\DT1\SMDA97\work\std_collector.out
F stderr : C:\usr\sap\DT1\SMDA97\work\std_collector.out
F console : no
F debugger: no
F nice    : no
F ********************************************************************************
F Process collector started with pid 3212
F ********************************************************************************
F [Thr 1788] *** LOG => Process collector started (pid 3212).
F
F [Thr 2352] Mon May 31 22:32:07 2010
F [Thr 2352] *** WARNING => process collector (pid 3212) died (exit code 2). [sfntlib.hpp 830]
F [Thr 2352] *** LOG => Signal 13 SIGCHLD.
F
F [Thr 1788] Mon May 31 22:32:07 2010
F [Thr 1788] *** LOG => Process collector died (pid 3212).
thanks
Mani

i am able to start it, so question 2,3 and 4 vanishes
For question 2 is the port number builds as 5instance number00 e.g if Java EE server instance is 02 then port assigned is 50200. i think its possible to install both and JDK 1.5 is allready included in the SAP CDs.
but i am still not able to start Solution Manager Diagonostic Agent my first question.
Thanks
Mani

SAP IS-Auto & SAP IS-Utilites in one system

Hi,
This is with reference to the thread link give below.
[Combining different IS solutions on one system;
Is it possible to activate SAP IS-Auto and SAP IS-Utilities in one System.
Also if possible please clarify whether SAP IS-Auto and SAP IS-Utilities are considered an enterprise extension or an enterprise add-on
With thanks & regards,
Vinodh

Thanks Bill !
As per the thread, Difference between enterprise extension and enterprise add-on SAP Auto is an add-on.
Since SAP ISU is an extension and SAP Auto is an add-on and as they don't share FICA, can we say that both SAP ISU and SAP Auto can be activated in the same system?
Thanks & regards,
Vinodh

Transporting Transport Request from One System to other

Hi All,
I want to create tranport request from ECC 5.0 System to ECC 6.0 system.
Please let me know steps for creating transport request and transporting transport request from one system to other system.
Thanks in advance.
Best Regds,
zubera

Hi,
You cannot transport request from ECC5.0 to ECC6.0.
Instead follow this:
<b>In ECC5.0</b>
Include all the objects into a transport request & provide the transport request no. to BASIS.
BASIS team will create 2 files for you based on the transport request no.
<b>in ECC6.0</b>
Provide the 2 files to BASIS Team & ask them to import them.
The objects would be available in ECC6.0
Best regards,
Prashant

I have a hp C410 all-in-one series printer. When I updated to 10.8.1 it was no longer supported. HP told me to go to the Apple system updates and download an installation program. I can't find that program in my Apple updates file.

I have a hp C410 all-in-one series printer. When I updated to 10.8.1 it was no longer supported. HP told me to go to the Apple system updates and download an installation program update. I can't find that program in my Apple updates file. Please help.

From the HP Support site, this may help:)
"Re: Problem with latest HP software update for Mountain Lion and HP Photosmart Premier C410.
Options
08-10-2012 10:54 AM
Download and install this: http://support.apple.com/kb/DL907
Reset the printing system:
- Go to System Preferences > Print & Scan
- Right (or control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - this will delete ALL of your printers!
- Select the plus sign to re-add a printer. Select the Defualt tab on the top of the window. Look for the printer, select it and wait until the "Add" button becomes available. Click it."
Hope this helps

Do I need to set system env variables for weblogic and SOA server installation?

Hi All,
   I already have two weblogic application servers on my machine(that were installed by others).
I observed some environment variables were also set in System variables(ORACLE_HOME,WEB_SERVER_HOME etc) section in Env variables section(Start Menu---> Computer --> properties ---).But why do we need to have system environment variables wherein we already have those variables in files like setDomainEnv.bat or/and setSOADoaminEnv.bat for each server.
And one more thing system variables will be applicable for all servers(the whole machine) right.It may spoil the installation of new servers and present servers as variables should be unique to each server.
    I want to install weblogic and SOA server installation.
So Can I remove the existing system variables(as they will applicable for every server) and install weblogic and SOA server installation without setting up the environment variables?
Especially I have multiple Weblogic servers,In that case how it would be to have environment variables(JAVA_HOME,WL_HOME,ORACLE_HOME etc)?
Please guide me on this to installl SOA suite .
Thanks in advance

Hi All,
   I already have two weblogic application servers on my machine(that were installed by others).
I observed some environment variables were also set in System variables(ORACLE_HOME,WEB_SERVER_HOME etc) section in Env variables section(Start Menu---> Computer --> properties ---).But why do we need to have system environment variables wherein we already have those variables in files like setDomainEnv.bat or/and setSOADoaminEnv.bat for each server.
And one more thing system variables will be applicable for all servers(the whole machine) right.It may spoil the installation of new servers and present servers as variables should be unique to each server.
    I want to install weblogic and SOA server installation.
So Can I remove the existing system variables(as they will applicable for every server) and install weblogic and SOA server installation without setting up the environment variables?
Especially I have multiple Weblogic servers,In that case how it would be to have environment variables(JAVA_HOME,WL_HOME,ORACLE_HOME etc)?
Please guide me on this to installl SOA suite .
Thanks in advance

Installation Wizard for one system

Hi,
We have only one system which will act as SCL and backend server. Can we try to deploy using Installation wizard? If yes what should be the number i mention to "Connect to SAP systems". Also what are the other requirements which I should care in this case? I mean the trust, rfc destinations, users etc.
Please let me know.
Thanks,
Rahul

Hi Holger,
I have 1 more doubt about the wizard. If there is 1 error at any step, i know we can execute that step again but what will happen to entries which were created sucessfully. will they be overwritten or they won't be created.
For e.g. In step 2, some tasks were successfully created but 2 or 3 task failed. Now i will again execute the wizard for Step 2. My question is what will happen to the task which got created successfully?
Thanks,
Rahul

Can I use my creative cloud products on more them one system at a time (Mac and PC)

Can I use my creative cloud products on more them one system at a time (Mac and PC)
I want to use the premiere on my Mac and some times on my PC.
Can I use it on other operating systems with one membership or do I have to purchase an other membership for my other system. I am only working on one system or the other at one time.
Thx

http://www.adobe.com/au/products/creativecloud/faq.html
Are there any unique benefits that come with my paid membership?
Yes, as a member of Creative Cloud, you get many benefits that you do not get when you purchase a traditional shrinkwrapped product:
Access to both the Mac OS and Windows® versions of the desktop applications and the ability to install them on your primary computer and one backup computer. So, if you have a Mac at home and a PC at work, you can install your applications on both as long as they are not running at the same time. See the product license agreements page for more information.

Download and upload Z programs from one r/3 to another r/3 system

hi,
i want to download all Z programs( reports, screens, function modules etc) from one R/3 system and upload the same into another R/3 system.
can anyone give me the sample code for this please
thanks.

hi Radhika,
For that save those programs into some transport request by assigning the development class and release the request to the system where you want the program to be ..
for assigning those programs on to some development class follow this path SE38 give the program name ... GOTO->OBJECT DIRECTORY ENTRY-> give the development class by changing $tmp to some development class
Regards,
santosh

EP 6.0 and BW in one system

Hello everyone,
We currently run EP 6.0 SP2 and BW 3.1 on separate systems and are looking at upgrading to EP 6.0 SP11 and BW 3.5. We have a Netweaver sandbox system setup with both running in one system and I was thinking we could consolidate these into one productive system and possibly save some hardware along the way. It seems with proper sizing it would be possible to do this. Does anyone have any experience with running these together productively or is anyoneelse thinking of going that route?
Regards,
Stephen

Your biggest consideration is regarding the UME. When you run combined ABAP/JAVA stacks then the UME for Java must be in the ABAP stack - so all your EP users will be managed with SU01. Certain user management functions are not fully available in the EP user mgmnt iViews (meaning you will need to use ABAP transactions for some UM activities), this is discussed in both Web AS and EP release restrictions note.
From a performance perspective you won't find much difference between running them seperately (i.e. not in a combined stack) but on the same host vs. running them together in the same instance.
Nick

Can't install adobe air installer. Message is its damaged and to install a new one. How do I do that?

I am trying to download a pc caller id. It begins to download and when I hit install I get the message that my installer file is damaged and to install a new one. Does anyone know how I do this? I have adobe air, but it's the installer that's giving me the problem. Any help would be appreciated.
Thank you,
Teros

Hi Terur,
You've landed in the Acrobat.com forum, which I'm not sure is the best place to get your question answered, but I can at least provide a link to the current Adobe Air installer: Adobe - Adobe AIR
I hope that does the trick! If you need an updated installer for the caller ID app that you're trying to install, you would need to download that again from that company's website (Adobe can't help there).
Best,
Sara

When I got a new iPhone5, I experienced short battery life, and system sofware issues were not the cause. The camera also takes a blury picture regardless of lighting and I have the black one. Has anyone else experienced similar problems?

When I got a new iPhone5, I experienced short battery life, and system sofware issues were not the cause. The camera also takes a blury picture regardless of lighting and I have the black one. Has anyone else experienced similar problems?

What makes you so sure it isn't software?
The camera can be focused by take the point of focus on the touch screen.
If it is new as you said, it should be under warranty. Make a Genius Bar appointment or contact Apple with a repair request.

OBIEE 11.1.1.5 and OBIEE 11.1.1.6 Installation on same system.

Hi All,
Is it possible to have OBIEE 11.1.1.5 and 11.1.1.6 on same system?
I know this is not practical and kind of unrecommended thing to do. But we have an OBIEE 11.1.1.5 instance installed on a server. And we don't want to deinstall it. Rather, if possible, we want to install OBIEE 11.1.1.6 along with this 11.1.1.5 instance.
Also, is it possible to have OBIEE 10g and OBIEE 11g on one system?
Thanks in advance...
Dev.

Hi,
Why don't you go with Upgrade option..thats best way...you just upgrade obiee11.1.1.5.0 to 11.1.1.6.0
Upgrade help Doc:
http://blog.guident.com/2012/03/upgrade-obiee-11-1-1-5-to-11-1-1-6/
http://gerardnico.com/wiki/dat/obiee/patch_11g_111160
Also, is it possible to have OBIEE 10g and OBIEE 11g on one system?
never tired you can tried to configre manual port configuration way
Thanks
Deva

XI and R/3 Installation on One System

Similar Messages

Maybe you are looking for