XI and RFC - how to configure by using 5000 IDocu00B4s

Gents,
can you help me ?
We´re using the matmas interface to send all material changes/new materials from one system to antoher system.
We made an BPM.
1. receive
2. RFC CAll remote (get some values from an XI Table)
3. Multimapping a) Matmas03 b)RFC Response into MATMAS05
Our mapping and BPM works fine.
But only for a few IDoc´s.
We tested with 5 to 7 IDocs. Sometimes it works but sometimes it craches(RED FLAG) cause of communication error. But we need 1000´s of IDoc´s.
Now we´re trying to change the remote RFC call into a local abap mapping.
Did you know a way (remote or local) to build this interface that we could use more than 5000 IDocs at one time ?
Regards,
Gordon.

Hi Gordon,
It appears that others have faced this problem too, Some of them tried to avoid BPM, because of the performance issues like yours. This was probably before SP13, though.
Check this:
500.000-1000000 IDOCs per day via XI?
However, if you must use BPM, use the multi-mapping feature (n:1 Transformation). You can try the 'Context' features in BPM. There is some useful documentation on SAP help, and also at:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8a57d190-0201-0010-9e87-d8f327e1dba7
Hope this helps,
Bhanu

Similar Messages

I using new ipad 32gb and i cant get user name and password how i configure it ? please give me solution

im using new ipad 32gb and i cant get user name and password how i configure it ? please give me solution

What do you mean 'can't get user name and password' ? What are you trying to do with your iPad and what happens when you do it ?

How to configure the use of WS-RM in "PI 7.11 EHP1?

How to configure the use of WS-RM in "PI 7.11 EHP1?
Currently in the editing window of the communication channel (adapter type WS), I can not see any options regarding Reliable Messaging protocol (WS-RM).
The scenario that is required is as follows.
(Consumer WS-RM) -> (Provider WS-RM PI 7.11 EHP1) -> (ABAP Proxy Backend NW 7.0)
I would greatly appreciate any help,
Thanks,
Roger.
Edited by: Roger Solano on Apr 7, 2011 10:31 PM

WS adapter supports WS Reliable Messaging. But WS adapter is used to communicate between two SAP web service runtime.
Check this blog and its links for understanding direct connection or point to point communcation using WS adapter
/people/william.li/blog/2008/02/13/point-to-point-connection-using-abap-in-sap-using-pi-71
Hoe that helps.

How to configure mail using portal collaboration

hi Guys..,
pls tel me
how to configure mail using portal collaboration and its uses..
thanks
regards
kamal

Hi,
Two Configure Email, first
You have to create a System for Groupware through System Administration ->System Configuration -> system LandScape
Then create a Groupwaretransport
implement SSO between your Mail server and your EP...
and finally
Create a Mail service...
More Info is available at below link..
http://help.sap.com/saphelp_nw04/helpdata/en/7c/6a469702474146a8ef2f97fe880b2f/frameset.htm
and have a look at the thread raised by be on Calender Configuration...
Collaboration calendar : No transport has been configured for the calendar
Regards,
Srinivas

In RFC how to uploading data using bdc

Hi, Experts
In RFC how to use bdc program for uploading data
any example plz.
my requrement for tcode ME21.
thank you in advance.
with best regards
sai

Thank u reply
my requirement is in function moudle
( Program will be called from non-sap system with the data in the form of table as per the structure given above. Then the program will do the some validation for the data. If data validated correct, BDC will be run for creating DO
condition is )
ex:
if T_itab KNTTP = K,
Run BDC for transaction ME21.
( in that you should not use upload and ws_upload )
in put paramer is taking value for structure (non- sap ) run the bdc update in sap system.
plz any sample program
regards
sai

How to configure to use Strut 1.2 in weblogic portal 10.3.2

I am new in weblogic portal, now i need to develop Strut portlet version 1.2. But I don't know how to configure it in weblogic 10.3.2 and i can't find document for how to configure Strut 1.2 to work on weblogic portal 10.3.2. I added relation libraries and configure like in weblogic document of oracle. But it's can not run and throw some exceptions like : can not render jsp file. Someone can tell me how to configure Strut 1.2 to develop Strut portlet ? Thanks in advance!

This would be a good place to start:
http://download.oracle.com/docs/cd/E15919_01/wlp.1032/e14243/integrate.htm#BABBEHCH
Brad

TtyS4 and ttyS5 how do I activate using 'setserial' or some other way

Is there a 'setserial' expert in the house?
I've got a daughter board/card that has a bunch of I/O on it. All devices work except the two serial ports. I have 4 serial ports on the main board plus these two on the daughter board for a total of 6 serial ports. The 4 ttyS* on the main board work but I can't get /dev/ttyS4 and /dev/ttyS5 to work. (these serial ports on this exact hardware work on Solaris 10 x86)
Here's what I've tried / found out so far:
Using 8250.nr_uarts=6" parameter to boot options in /boot/grub/grub.conf so once booted there is /dev/ttyS4 and /dev/tty5 (in addition to the standard ones).
Now I want to use "lspci -v" to find UART device info for ttyS4 and ttyS5 so I can use 'setserial' to specify port, interrupt and so on. This is where I run into trouble. I see from a block diagram from the manufacturer of the hardware that there are two Exar DUART chips: XR17D152 DUART for ttyS2 and ttyS3, and a XR16L2551 DUART for ttyS4 and ttyS5. Problem is, when I do a 'lspci -v' only the XR17D152 DUART for ttyS2 and ttyS3 shows up. 'lspci -v' does not report anything for the XR17D152 DUART, which is for ttyS4 and ttyS5. I look at a block diagram of the daughter board where the XR17D152 DUART is and see it is NOT on the main bus but under a PLX PCI9656 I/O accelerator chip. I do see the info for the PCI9656 chip when I 'lspci -v' but not the DUART that's attached to it. With nothing to lose, I tried using the 'lspci' info from the PCI965 I/O accelerator as parameters to setserial for ttyS4 and ttyS5, but of course that didn't get results. Furthermore I see when I 'dmesg | grep tty' that that serials ttyS2 and ttyS3 use MMIO, which I'm not sure that 'setserial' can specify MMIO, only port IO.
# lspci -v - output that shows the I/O acceler
04:05.0 Serial controller: Exar Corp. XR17C/D152 Dual PCI UART (rev 02) (prog-if 02 [16550])
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 17
Region 0: Memory at 80503000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: serial
02:01.0 Bridge: PLX Technology, Inc. Device 9601 (rev ba)
Subsystem: PLX Technology, Inc. Device 9656
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 7
Region 0: Memory at 80160000 (32-bit, non-prefetchable) [size=512]
Region 1: I/O ports at 3000 [size=256]
Region 2: Memory at 80040000 (32-bit, non-prefetchable) [size=128K]
Region 3: Memory at 80060000 (32-bit, non-prefetchable) [size=128K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] CompactPCI hot-swap <?>
Capabilities: [4c] Vital Product Data
Unknown large resource type 35, will not decode more.
#dmesg | grep tty - this output shows that ttyS2 and ttyS3 use MMIO, there is no info for the XR16L2551, because it's not detected. I need to know how to tell the kernel about it.
[ 2.008167] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.033915] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.074052] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.100632] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.110283] 0000:04:05.0: ttyS2 at MMIO 0x80503000 (irq = 17) is a XR17D15X
[ 2.116775] 0000:04:05.0: ttyS3 at MMIO 0x80503200 (irq = 17) is a XR17D15X
Questions:
- XR16L2551 DUART (serial ttyS4 and ttyS5) is not detected by 'lspci -v' Can I find it some other way? Does it have a known MMIO? A way to probe for it’s MMIO?
- Can setserial specify MMIO for ttyS4 and ttyS5 once I find out what it is?
- Since the XR16L2551 resides under a PLX Technology PCI9656 chip which IS found by 'lspci -v' can I use memory info from it to probe for the XR16L2551, or can I even use the 'lspci' info from the PLX chip as parameters to 'setserial?
- How can I get these serials, ttyS4 and ttyS5 to work?
Last edited by Mogombus (2012-04-06 22:54:24)

lizziepaige wrote:
... having nothing but problems ...
See your other posts...
https://discussions.apple.com/message/20666642#20666642
https://discussions.apple.com/message/20666702#20666702

How to configure OC4J using RMI/IIOP with SSL

Any help?
I just mange configure the OC4J using RMI/IIOP but base on
But when I follow further to use RMI/IIOP with SSL I face the problem with: javax.net.ssl.SSLException: Unrecognized SSL message, plaintext connection?
p/s: I use self generate keystore which should be ok as I can use it for https connection.
Any one can help?
Below is the OC4J log:
D:\oc4j\j2ee\home>java -Djavax.net.debug=all -DGenerateIIOP=true -Diiop.runtime.debug=true -jar oc4j.jar
05/02/23 16:43:16 ================ IIOPServerExtensionProvider.preInitApplicationServer
05/02/23 16:43:38 ================= IIOPServerExtensionProvider.postInitApplicationServer
05/02/23 16:43:38 ================== config = {SEPS={IIOP={ssl-port=5556, port=5555, ssl=true, trusted-clients=*, ssl-client-server-auth-port=5557, keystore=D:\\oc4j\\j2ee\\home\\server.keystore, keystore-password=123456, truststore=D:\\oc4j\\j2ee\\home\\server.keystore, truststore-password=123456, ClassName=com.oracle.iiop.server.IIOPServerExtensionProvider, host=localhost}}}
05/02/23 16:43:38 ================== server.getAttributes() = {threadPool=com.evermind.server.ApplicationServerThreadPool@968fda}
05/02/23 16:43:38 ================== pool: null
05/02/23 16:43:38 ====================== In startServer ...
05/02/23 16:43:38 ==================== Creating an IIOPServer ...
05/02/23 16:43:38 ========= IIOP server being initialized
05/02/23 16:43:38 SSL port: 5556
05/02/23 16:43:38 SSL port 2: 5557
05/02/23 16:43:43 com.sun.corba.ee.internal.iiop.GIOPImpl(Thread[Orion Launcher,5,main]): getEndpoint(IIOP_CLEAR_TEXT, 5555, null)
05/02/23 16:43:43 com.sun.corba.ee.internal.iiop.GIOPImpl(Thread[Orion Launcher,5,main]): createListener( socketType = IIOP_CLEAR_TEXT port = 5555 )
05/02/23 16:43:44 com.sun.corba.ee.internal.iiop.GIOPImpl(Thread[Orion Launcher,5,main]): getEndpoint(SSL, 5556, null)
05/02/23 16:43:44 com.sun.corba.ee.internal.iiop.GIOPImpl(Thread[Orion Launcher,5,main]): createListener( socketType = SSL port = 5556 )
05/02/23 16:43:45 ***
05/02/23 16:43:45 found key for : mykey
05/02/23 16:43:45 chain [0] = [
Version: V1
Subject: CN=Server, OU=Bar, O=Foo, L=Some, ST=Where, C=UN
Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: SunJSSE RSA public key:
public exponent:
010001
modulus:
b1239fff 2ae5d31d b01a0cfb 1186bae0 bbc7ac41 94f24464 e92a7e33 6a5b0844
109e30fb d24ad770 99b3ff86 bd96c705 56bf2e7a b3bb9d03 40fdcc0a c9bea9a1
c21395a4 37d8b2ce ff00eb64 e22a6dd6 97578f92 29627229 462ebfee 061c99a4
1c69b3a0 aea6a95b 7ed3fd89 f829f17e a9362efe ccf8034a 0910989a a8573305
Validity: [From: Wed Feb 23 15:57:28 SGT 2005,
To: Tue May 24 15:57:28 SGT 2005]
Issuer: CN=Server, OU=Bar, O=Foo, L=Some, ST=Where, C=UN
SerialNumber: [ 421c3768]
Algorithm: [MD5withRSA]
Signature:
0000: 34 F4 FA D4 6F 23 7B 84 30 42 F3 5C 4B 5E 18 17 4...o#..0B.\K^..
0010: 73 69 73 A6 BF 9A 5D C0 67 8D C3 56 DF A9 4A AC sis...].g..V..J.
0020: 88 AF 24 28 C9 39 16 22 29 81 01 93 86 AA 1A 5D ..$(.9.")......]
0030: 07 89 26 22 91 F0 8F DE E1 4A CF 17 9A 02 51 7D ..&".....J....Q.
0040: 92 D3 6D 9B EF 5E C1 C6 66 F9 11 D4 EB 13 8F 17 ..m..^..f.......
0050: E7 66 58 9F 6C B0 60 7C 39 B4 E0 B7 04 A7 7F A6 .fX.l.`.9.......
0060: 4D A5 89 E7 F4 8A DC 59 B4 E7 A5 D4 0A 35 9A F1 M......Y.....5..
0070: A2 CD 3A 04 D6 8F 16 B1 9E 6F 34 40 E8 C0 47 03 ..:[email protected].
05/02/23 16:43:45 ***
05/02/23 16:43:45 adding as trusted cert:
05/02/23 16:43:45 Subject: CN=Client, OU=Bar, O=Foo, L=Some, ST=Where, C=UN
05/02/23 16:43:45 Issuer: CN=Client, OU=Bar, O=Foo, L=Some, ST=Where, C=UN
05/02/23 16:43:45 Algorithm: RSA; Serial number: 0x421c3779
05/02/23 16:43:45 Valid from Wed Feb 23 15:57:45 SGT 2005 until Tue May 24 15:57:45 SGT 2005
05/02/23 16:43:45 adding as trusted cert:
05/02/23 16:43:45 Subject: CN=Server, OU=Bar, O=Foo, L=Some, ST=Where, C=UN
05/02/23 16:43:45 Issuer: CN=Server, OU=Bar, O=Foo, L=Some, ST=Where, C=UN
05/02/23 16:43:45 Algorithm: RSA; Serial number: 0x421c3768
05/02/23 16:43:45 Valid from Wed Feb 23 15:57:28 SGT 2005 until Tue May 24 15:57:28 SGT 2005
05/02/23 16:43:45 trigger seeding of SecureRandom
05/02/23 16:43:45 done seeding SecureRandom
05/02/23 16:43:45 com.sun.corba.ee.internal.iiop.GIOPImpl(Thread[Orion Launcher,5,main]): getEndpoint(SSL_MUTUALAUTH, 5557, null)
05/02/23 16:43:45 com.sun.corba.ee.internal.iiop.GIOPImpl(Thread[Orion Launcher,5,main]): createListener( socketType = SSL_MUTUALAUTH port = 5557 )
05/02/23 16:43:45 matching alias: mykey
matching alias: mykey
05/02/23 16:43:46 ORB created ..com.oracle.iiop.server.OC4JORB@65b738
05/02/23 16:43:47 com.sun.corba.ee.internal.corba.ClientDelegate(Thread[Orion Launcher,5,main]): invoke(ClientRequest) called
05/02/23 16:43:47 com.oracle.iiop.server.OC4JORB(Thread[Orion Launcher,5,main]): process: dispatching to scid 2
05/02/23 16:43:47 com.oracle.iiop.server.OC4JORB(Thread[Orion Launcher,5,main]): dispatching to sc [email protected]7
05/02/23 16:43:48 com.sun.corba.ee.internal.corba.ClientDelegate(Thread[Orion Launcher,5,main]): invoke(ClientRequest) called
05/02/23 16:43:48 com.oracle.iiop.server.OC4JORB(Thread[Orion Launcher,5,main]): process: dispatching to scid 2
05/02/23 16:43:48 com.oracle.iiop.server.OC4JORB(Thread[Orion Launcher,5,main]): dispatching to sc com.sun.corba.ee.internal.corba.ServerDelegate@9300cc
05/02/23 16:43:48 com.sun.corba.ee.internal.corba.ServerDelegate(Thread[Orion Launcher,5,main]): Entering dispatch method
05/02/23 16:43:48 com.sun.corba.ee.internal.corba.ServerDelegate(Thread[Orion Launcher,5,main]): Consuming service contexts, GIOP version: 1.2
05/02/23 16:43:48 com.sun.corba.ee.internal.corba.ServerDelegate(Thread[Orion Launcher,5,main]): Has code set context? false
05/02/23 16:43:48 com.sun.corba.ee.internal.corba.ServerDelegate(Thread[Orion Launcher,5,main]): Dispatching to servant
05/02/23 16:43:48 com.sun.corba.ee.internal.corba.ServerDelegate(Thread[Orion Launcher,5,main]): Handling invoke handler type servant
05/02/23 16:43:48 NS service created and started ..org.omg.CosNaming._NamingContextExtStub:IOR:000000000000002b49444c3a6f6d672e6f72672f436f734e616d696e672f4e616d696e67436f6e746578744578743a312e30000000000001000000000000007c000102000000000c31302e312e3231342e31310015b3000000000031afabcb0000000020d309e06a0000000100000000000000010000000c4e616d65536572766963650000000004000000000a0000000000000100000001000000200000000000010001000000020501000100010020000101090000000100010100
05/02/23 16:43:48 NS ior = ..IOR:000000000000002b49444c3a6f6d672e6f72672f436f734e616d696e672f4e616d696e67436f6e746578744578743a312e30000000000001000000000000007c000102000000000c31302e312e3231342e31310015b3000000000031afabcb0000000020d309e06a0000000100000000000000010000000c4e616d65536572766963650000000004000000000a0000000000000100000001000000200000000000010001000000020501000100010020000101090000000100010100
05/02/23 16:43:48 Oracle Application Server Containers for J2EE 10g (9.0.4.0.0) initialized
05/02/23 16:45:14 com.sun.corba.ee.internal.iiop.ConnectionTable(Thread[JavaIDL Listener,5,main]): Server getConnection(119e583[Unknown 0x0:0x0: Socket[addr=/127.0.0.1,port=1281,localport=5556]], SSL)
05/02/23 16:45:14 com.sun.corba.ee.internal.iiop.ConnectionTable(Thread[JavaIDL Listener,5,main]): host = 127.0.0.1 port = 1281
05/02/23 16:45:14 com.sun.corba.ee.internal.iiop.ConnectionTable(Thread[JavaIDL Listener,5,main]): Created connection Connection[type=SSL remote_host=127.0.0.1 remote_port=1281 state=ESTABLISHED]
com.sun.corba.ee.internal.iiop.MessageMediator(Thread[JavaIDL Reader for 127.0.0.1:1281,5,main]): Creating message from stream
05/02/23 16:45:14 JavaIDL Reader for 127.0.0.1:1281, handling exception: javax.net.ssl.SSLException: Unrecognized SSL message, plaintext connection?
05/02/23 16:45:14 JavaIDL Reader for 127.0.0.1:1281, SEND TLSv1 ALERT: fatal, description = unexpected_message
05/02/23 16:45:14 JavaIDL Reader for 127.0.0.1:1281, WRITE: TLSv1 Alert, length = 2
05/02/23 16:45:14 JavaIDL Reader for 127.0.0.1:1281, called closeSocket()
05/02/23 16:45:14 com.sun.corba.ee.internal.iiop.ReaderThread(Thread[JavaIDL Reader for 127.0.0.1:1281,5,main]): IOException in createInputStream: javax.net.ssl.SSLException: Connection has been shutdown: javax.net.ssl.SSLException: Unrecognized SSL message, plaintext connection?
05/02/23 16:45:14 javax.net.ssl.SSLException: Connection has been shutdown: javax.net.ssl.SSLException: Unrecognized SSL message, plaintext connection?
05/02/23 16:45:14 at com.sun.net.ssl.internal.ssl.SSLSocketImpl.d(DashoA12275)
05/02/23 16:45:14 at com.sun.net.ssl.internal.ssl.AppInputStream.read(DashoA12275)
05/02/23 16:45:14 at com.sun.corba.ee.internal.iiop.messages.MessageBase.readFully(MessageBase.java:520)
05/02/23 16:45:14 at com.sun.corba.ee.internal.iiop.messages.MessageBase.createFromStream(MessageBase.java:58)
05/02/23 16:45:14 at com.sun.corba.ee.internal.iiop.MessageMediator.processRequest(MessageMediator.java:110)
05/02/23 16:45:14 at com.sun.corba.ee.internal.iiop.IIOPConnection.processInput(IIOPConnection.java:339)
05/02/23 16:45:14 at com.sun.corba.ee.internal.iiop.ReaderThread.run(ReaderThread.java:63)
05/02/23 16:45:14 Caused by: javax.net.ssl.SSLException: Unrecognized SSL message, plaintext connection?
05/02/23 16:45:14 at com.sun.net.ssl.internal.ssl.InputRecord.b(DashoA12275)
05/02/23 16:45:14 at com.sun.net.ssl.internal.ssl.InputRecord.read(DashoA12275)
05/02/23 16:45:14 at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA12275)
05/02/23 16:45:14 at com.sun.net.ssl.internal.ssl.SSLSocketImpl.j(DashoA12275)
05/02/23 16:45:14 at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA12275)
05/02/23 16:45:14 ... 6 more
05/02/23 16:45:14 com.sun.corba.ee.internal.iiop.IIOPConnection(Thread[JavaIDL Reader for 127.0.0.1:1281,5,main]): purge_calls: starting: code = 1398079696 die = true
05/02/23 16:45:14 JavaIDL Reader for 127.0.0.1:1281, called close()
05/02/23 16:45:14 JavaIDL Reader for 127.0.0.1:1281, called closeInternal(true)
05/02/23 16:45:14 JavaIDL Reader for 127.0.0.1:1281, called close()
05/02/23 16:45:14 JavaIDL Reader for 127.0.0.1:1281, called closeInternal(true)
05/02/23 16:45:14 JavaIDL Reader for 127.0.0.1:1281, called close()
05/02/23 16:45:14 JavaIDL Reader for 127.0.0.1:1281, called closeInternal(true)
05/02/23 16:45:14 com.sun.corba.ee.internal.iiop.ConnectionTable(Thread[JavaIDL Reader for 127.0.0.1:1281,5,main]): DeleteConn called: host = 127.0.0.1 port = 1281

Good point, I do belive what you are referring to is this:
Any client, whether running inside a server or not, has EJB security properties. Table 15-2 lists the EJB client security properties controlled by the ejb_sec.properties file. By default, OC4J searches for this file in the current directory when running as a client, or in ORACLE_HOME/j2ee/home/config when running in the server. You can specify the location of this file explicitly with the system property setting -Dejb_sec_properties_location=pathname.
Table 15-2 EJB Client Security Properties
Property Meaning
# oc4j.iiop.keyStoreLoc
The path and name of the keystore. An absolute path is recommended.
# oc4j.iiop.keyStorePass
The password for the keystore.
# oc4j.iiop.trustStoreLoc
The path name and name of the truststore. An absolute path is recommended.
# oc4j.iiop.trustStorePass
The password for the truststore.
# oc4j.iiop.enable.clientauth
Whether the client supports client-side authentication. If this property is set to true, you must specify a keystore location and password.
# oc4j.iiop.ciphersuites
Which cipher suites are to be enabled. The valid cipher suites are:
TLS_RSA_WITH_RC4_128_MD5
SSL_RSA_WITH_RC4_128_MD5
TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA
SSL_DHE_DSS_WITH_3DES_EDE_CBC_SHA
TLS_RSA_EXPORT_WITH_RC4_40_MD5
SSL_RSA_EXPORT_WITH_RC4_40_MD5
TLS_DHE_DSS_EXPORT_WITH_DES40_CBC_SHA
SSL_DHE_DSS_EXPORT_WITH_DES40_CBC_SHA
nameservice.useSSL
Whether to use SSL when making the initial connection to the server.
client.sendpassword
Whether to send user name and password in clear form (unencrypted) in the service context when not using SSL. If this property is set to true, the user name and password are sent only to servers listed in the trustedServer list.
oc4j.iiop.trustedServers
A list of servers that can be trusted to receive passwords sent in clear form. This has no effect if client.sendpassword is set to false. The list is comma-delimited. Each entry in the list can be an IP address, a host name, a host name pattern (for example, *.example.com), or * (where "*" alone means that all servers are trusted.

RFC - How to configure RFC

Hi all,
I need to configure RFC in my SAP system in order to execute remote functions in a machine that accesses the SAP trough ITS. ie, this machine is not in the same network with the sap server, it passes through a gateway to achieve the server. how does the SAPRFC.INI file looks like? what is the connection string in this case?
Thank you in advance.
Kind regards,
Sérgio Nuvunga.

hello,
u can go through this linke...which u can troubleshoot.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/46/ca39bafc501516e10000000a114a6b/frameset.htm
ragards,
sumanth reddy
Edited by: sumanth reddy on Jan 23, 2009 7:33 AM

How to configure OSB using SAS drive on AIX6L?

Hello, people.
I've an AIX6L box with a SAS autoloader connected to it.
Because of this I can't get basic informations to configure this device with OSB 10.3, i.e., this device don't have lun_id and scsi_id informations as described follow.
Can you please help me?
Thanks and best regards.
[root@oracle1]/> lsdev -c tape
rmt0 Available 03-08-00 IBM 3580 Ultrium Tape Drive (SAS)
smc0 Available 03-08-00 IBM 3572 Library Medium Changer (SAS)
[root@oracle1]/> lsattr -El rmt0
block_size 512 BLOCK size (0=variable length) True
delay 45 Set delay after a FAILED command True
density_set_1 0 DENSITY setting #1 True
density_set_2 0 DENSITY setting #2 True
extfm yes Use EXTENDED file marks True
mode yes Use DEVICE BUFFERS during writes True
res_support no RESERVE/RELEASE support True
ret_error no RETURN error on tape change or reset True
rwtimeout 144 Set timeout for the READ or WRITE command True
var_block_size 0 BLOCK SIZE for variable length support True
ww_id 500169772116a010 World Wide Identifier False
Edited by: rbrambila on Oct 13, 2010 5:44 PM

OSB doesn't support SAS attached devices on AIX.
Donna

How to configure to use an ipad mini as persolnal hotspot?

I have an ipad mini. I wan to use this ipad mini to share internet as personal hotspot for my laptop. Please help me configure it.
Thanks

Checked with your carrier to see if they support it on the iPad
If they do support it then you should have a Settings > General > Network > Personal Hotspot option

VBA and RFC - How to deal with tables in export/import parameters

Hi,
maybe one of you can support me...
I have a couple of vba modules reading and writing data to SAP by means of function modules. As usual, they use export and import parameters as well as tables (in the table section). They work very well.
Now, I want to execute some newer function modules and they don't use tables in the table section (because they're obsolete nowadays), instead they expect the tables as export resp. import parameters. I tried it in a couple of ways, without any success.
Has anybody tried this before? And if so, do you mind share some snippets?
Best regards, Thomas

Hello Thomas,
I think we discussed the same problem here, but unfortunately without any result. Please, take a look at this post and let us know.
Cheers
Stefan

How can I stop using my primary Apple ID (Gmail) but leave my secondary Apple ID (icloud) as primary ond only ONE?

Good afternoon friends.
Please help me and tell how can I stop using my primary Apple ID (Gmail) but leave my secondary Apple ID (icloud) as primary ond only ONE?
I started using Apple ID in 2011 when iCloud was not exist and was forced to use non-apple e-mail adress as primary ID.
So I used GMail mailbox.
When iCloud was started I created my account but unfortunatelly can't remove this Gmail address from my Apple ID and replace it with icloud mail address.
I was VERY dissapointed because I don't want to use "outside" mailbox to get letters from Apple and ny ID.
In fact I see the Apple old users and fans discrimination.
When creating new user accounts are free to create a box on the iCloud mail and use it as a primary ID, and the only ONE.
At the same time the old user is obliged to keep third-party mail box like Gmail etc. as the primary and can not get such an opportunity, as a new user
This is extremely inconvenient and a VERY strange logical.
For example, now I want to stop using this mailbox on Gmail but I can not do that because in this case I lose access to my ID, or run the risk that someone in the future will create a box with the same name on Gmail (when name will be free and available) and will automatically get access to my accounts on Apple and to my Apple ID.
Now, to avoid this, your team, I offer the only way out: ID, create anew.
Of course it's possible, but then:
- I lose all my purchases for 3 years and will be forced to make them again and pay money for the second time for my purchases
- Lose access to the familiar iCloud e-mail address who now serves as secondary ID because this e-mail address is almost no longer available and will never be released in future.
And now answer me for ONLY TWO questions:
- WHERE IS LOGIC?
- WHAT ABOUT TO BE FRIENDLY FOR YOUR USERS AND FANS?
Thank you!
Hopefully for your GOOD answers.

You cannot make your @icloud.com address the login address for the ID. However you can change your ID, currently a Gmail one, to any other functioning non-Apple email address. The Gmail address would then no longer access your account, and so even if someone were to obtain posession of it (is that even possible) it wouldn't allow them to get into your account.
If you want to change your ID to another email address please follow the procedure outlined below, particularly noting the first step.
Firstly, if you have 'Find My iPhone/iPad/iMac' enabled on any of your devices, turn it off.
Create a new email address, for example at Yahoo or Gmail, or anywhere convenient (or you can use an existing address as long as it has never been associated with an Apple ID).
Go to http://appleid.apple.com and click 'Manage your Apple ID'. Sign in with the current ID.
Where it says 'Apple ID and primary email address' and gives your current ID email address, click 'edit'.
Enter your new address and click 'Save changes'.
Now you will need to go to each of your devices and sign out in System Preferences (or Settings)>iCloud - 'Sign out' on a Mac, 'Delete this account' on an iOS device (this will not delete the account from the server).
Then sign back in with your new ID. Your iCloud data will disappear from your devices when you sign out, but reappear when you sign back in.
I re-iterate: before you start, turn off 'Find My Mac' (or whatever) or you will need the services of Support.

Difference between BAPI and RFC?

Difference between BAPI and RFC?
also where to use BAPI and where to use RFC?

Hi,
BAPI are RFC enabled function modules. the difference between RFc and BAPI are business objects. You create business objects and those are then registered in your BOR (Business Object Repository) which can be accessed outside the SAP system by using some other applications (Non-SAP) such as VB or JAVA. in this case u only specify the business object and its method from external system in BAPI there is no direct system call. while RFC are direct system call Some BAPIs provide basic functions and can be used for most SAP business object types. These BAPIs should be implemented the same for all business object types. Standardized BAPIs are easier to use and prevent users having to deal with a number of different BAPIs. Whenever possible, a standardized BAPI must be used in preference to an individual BAPI.
The following standardized BAPIs are provided:
Reading instances of SAP business objects
GetList ( ) With the BAPI GetList you can select a range of object key values, for example, company codes and material numbers.
The BAPI GetList() is a class method.
GetDetail() With the BAPI GetDetail() the details of an instance of a business object type are retrieved and returned to the calling program. The instance is identified via its key. The BAPI GetDetail() is an instance method. BAPIs that can create, change or delete instances of a business object type
The following BAPIs of the same object type have to be programmed so that they can be called several times within one transaction. For example, if, after sales order 1 has been created, a second sales order 2 is created in the same transaction, the second BAPI call must not affect the consistency of the sales order 2. After completing the transaction with a COMMIT WORK, both the orders are saved consistently in the database.
Create( ) and CreateFromData! ( )
The BAPIs Create() and CreateFromData() create an instance of an SAP business object type, for example, a purchase order. These BAPIs are class methods.
Change( )
The BAPI Change() changes an existing instance of an SAP business object type, for example, a purchase order. The BAPI Change () is an instance method.
Delete( ) and Undelete( ) The BAPI Delete() deletes an instance of an SAP business object type from the database or sets a deletion flag.
The BAPI Undelete() removes a deletion flag. These BAPIs are instance methods.
Cancel ( ) Unlike the BAPI Delete(), the BAPI Cancel() cancels an instance of a business object type. The instance to be cancelled remains in the database and an additional instance is created and this is the one that is actually canceled. The Cancel() BAPI is an instance method.
Add<subobject> ( ) and Remove<subobject> ( ) The BAPI Add<subobject> adds a subobject to an existing object inst! ance and the BAPI and Remove<subobject> removes a subobject from an object instance. These BAPIs are instance methods.
Regards,
Prakash

How to configure and publish Webservice (WMS Redprairie) to SAP using RFC

Hi XI Techno Savies,
I know how to configure SAP RFC, SAP IDOC adapters for sending and receiving. I want to know the step by step procedure to configure and Publish Webservices for Ware House Management System "REDPRAIRIE" for sending and receiving message to SAP R3/BW. Kindly help me.
Thanks,
Sridhara Addala.

Hi,
This doc may help you-general
http://help.sap.com/saphelp_nw04/helpdata/en/0d/2eac5a56d7e345853fe9c935954ff1/content.htm
/people/durairaj.athavanraja/blog/2004/09/20/consuming-web-service-from-abap
in XI-
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/befdeb90-0201-0010-059b-f222711d10c0
Regards,
Moorthy

XI and RFC - how to configure by using 5000 IDocu00B4s

Similar Messages

Maybe you are looking for