XI Archiving: Restarting a terminated archived job.

Hi All,
Due to some constraints, our PI server (devt) has only 9.5 GB of disk space for the archive directory. We have 300,000 messages that is flagged for archiving and it seems that the archiving job will terminate with a dataset_write_error which we assume is caused because there is not enough disk space in the archive folders.
After moving the previous archive files out of the directory to reclaim the disk space, we restarted the archive job.Will restarting the archive job allow the archive job to pick up from where it was terminated or will it "restart" from beginning?
Anyone experienced something similar before?

Dear Lugman,
the behaviour of the new archiving job depends on the configuration of archiving object BC_XMB (transaction AOBJ). If the option "Do Not Before End of Write Phase" is set (default), then the next archiving job will start from the very beginning. In this case all archive file written by the previous job can be deleted. If the option is de-selected the new archiving job will start with the last archiving file. All files that were written sucessfully before the error ocurred are safe.
In general you might also want to increase the retention period temporarily. This way you reduce the number of messages to be archived in one single blow and you have better control on the data volume that is written to file.
Best regards,
Harald Keimer
XI Development Support
SAP AG, Walldorf

Similar Messages

Archive routing in SAP archiving

Has anyone used Archive routing? I keep getting error message "No suitable content repository / logical file name found". but I know that logical file name has been defined properly, so as variant. Any idea?

Hello again,
I think you will need to provide more information as there is some type of inconsistency between what you have configured for archive routing (rules and conditions) and the selection criteria in the write job variant.
Out in the SAP Help Portal, it states:
When entering the selection criteria in the variant it is important to make sure that the set of data covered by the selection criteria of the variant falls AT LEAST into the set of data covered by the rules (it does not have to be exactly the same, but at least a subset). If this is not the case, the archiving session is terminated before the write job begins.
Best Regards,
Karin Tillotson

Archiver is unable to archive a redo log because the output device is full

Dear Experts,
When I logged to EM of my DB 11g R2. I found the following:
- Database Instance Status : Down
- Details
The instance has been terminated by a database process because of a fatal internal condition, or a critical background process was killed by the user.
Archiver is unable to archive a redo log because the output device is full or unavailable.
- Agent Connection to Instance
Status: Failed
Details: ORA-01034: ORACLE not available
Thank you in advance for any help you provide
Best Regards

mahmoudrabie wrote:
Thank you 919294
I was root not oracle and when I switch to oracle (which is member of dba group), the I ran
rman target /
Recovery Manager: Release 11.2.0.1.0 - Production on Wed Mar 7 13:27:06 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database (not started)
then as friends suggested
RMAN> backup archivelog all delete input;
Starting backup at 07-MAR-12
using target database control file instead of recovery catalog
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 03/07/2012 13:28:00
RMAN-06403: could not obtain a fully authorized session
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directorycheck the connection
connected to target database (not started)*so first startup the databaseto mount and then perform the operation
--neeraj

ERROR MESSAGE sap system manager:work process restarted, session terminated

Hi,
i am a beginer in SAP administration, users are getting this error message and i have done all my research and not able to resolve this issue. Here are the details
SAP Version :ideas 4.7
Database :Oracle
OS : windows 2003
Module user is working on MM
user working on it is a Super user with all the permissions
SAP is configure to run under the European date and decimal format.
I have never done any database administration on it, it is a new install and has been rarely used.
User creates a RFQ and when he tries saving it , seems like for the first time after either restarting the macine or restarting the service it might work and at time it might not, this is a very sporadic error and most of the times it crashes out with the message "sap system manager:work process restarted, session terminated" and kicks the user out of the session.
Below are the details of the error message from ST22 :
name of the runtime error : system_core_dumped
below are the details of the error message and its resoltion as suggested by sap help :
========
Runtime Errors         SYSTEM_CORE_DUMPED
       Occurred on     01.02.2008 at 07:52:19
Process terminated by signal " ".
What happened?
The current ABAP program had to be terminated because the
ABAP processor detected an internal system error.
The current ABAP program "SAPLCLSC" had to be terminated because the ABAP
processor discovered an invalid system state.
What can you do?
                                                                                Make a note of the actions and input which caused the error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
An SAP System process was terminated by an operating system signal.
                                                                                Possible reasons for this are:
1. Internal SAP System error.
2. Process was terminated externally (by the system administrator).
           Last error logged in SAP kernel
                                                                                Component............ "Taskhandler"
Place................ "SAP-Server server1_DEV_00 on host server1 (wp 1)"
Version.............. 1
Error code........... 11
Error text........... "ThSigHandler: signal"
Description.......... " "
System call.......... " "
Module............... "thxxhead.c"
Line................. 9555
How to correct the error
The SAP System work directory (e.g. /usr/sap/c11/D00/work ) often
contains a file called 'core'.
Save this file under another name.
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
   To obtain this, select the "Print" function on the current screen.
                                                                                2. A suitable hardcopy prinout of the system log.
   To obtain this, call the system log with Transaction SM21
   and select the "Print" function to print out the relevant
   part.
3. If the programs are your own programs or modified SAP programs,
   supply the source code.
   To do this, you can either use the "PRINT" command in the editor or
   print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
   or which actions and input led to the error.
System environment
SAP Release.............. " "
Application server....... " "
Network address.......... " "
Operating system......... " "
Release.................. " "
Hardware type............ " "
Character length......... " " Bits
Pointer length........... " " Bits
Work process number...... " "
Short dump setting....... " "
Database server.......... " "
Database type............ " "
Database name............ " "
Database owner........... " "
Character set............ " "
SAP kernel............... " "
Created on............... " "
Created in............... " "
Database version......... " "
Patch level.............. " "
Patch text............... " "
Supported environment....
Database................. " "
SAP database version..... " "
Operating system......... " "
User, transaction...
Client.............. " "
User................ " "
Language key........ " "
Transaction......... "ME41 "
Program............. "SAPLCLSC"
Screen.............. "SAPMM06E 0320"
Screen line......... 71
Information on where termination occurred
The termination occurred in the ABAP program "SAPLCLSC" in "EXECUTE_SELECT".
The main program was "SAPMM06E ".
The termination occurred in line 131 of the source code of the (Include)
program "LCLSCF2G"
of the source code of program "LCLSCF2G" (when calling the editor 1310).
=============
i even tried increasing the dialog processes but with no use.The same error occurs.
I appreciate every one of help i can get, i am working on a deadline which is tomorrow evening to resovle this issue, any kind of help is highly appreciated.
thanks
mudessir.

Hi
   follow correction method suggested in this dump,
" The SAP System work directory (e.g. /usr/sap/c11/D00/work ) often
contains a file called 'core'. Save this file under another name."
have you done this?
with regards,
raj.
<i>pls, award points</i>

ARchiving FI_MONTHY, FS10N is archived even when FBL3N still has open items

i All,
I'm trying to archive GL Account Master Data. I understand that we need to archive FI_DOCUMNT to archive all cleared document, and then FI_MONTHLY for the transaction figures and last one is FI_ACCOUNT to archive gl accounts master data.
My questions are:
1. What is the reason SAP does not allow us to choose GL account to archive in FI_MONTHLY?
2. Why FI_MONTHLY archives transaction figures in FS10N, even though there is still open item in FBL3N?
3. In my sample of GL accounts, even though FI_DOCUMNT and FI_MONTHLY have been archived and no data in that particular GL Account, FI_ACCOUNT can not find the account i want to archive. Is there any other thing i need to set before archiving the GL? I can only mark the "marked for deletion" in the gl at company code level, because it is still being used in other company code.
Thanks a lot for the advice.
CW

Hi Ce Wie,
People need to run archiving on periodic basis, basically to improve system performance. Archiving means removing data from SA data base to Archiving server or other device that can be access later on for example accounting document.
SAP recommend to archive the document via * Archiving OBject* such as FI_DOCUMNT. Those data removed from Database but to support audit requirement, it can be accessed if necessary.
SAP do not recommend to archive Master Data as long the Master data are still need in transactions. Should there is any unused master data or master data errorly created, what you can do is setting block or set deletion flag indicator. Please see SAP note 77670 for more detail.

Archive and print and archive buttons not active

I create a smartform and join it in sap. It is transection me9a.
The problem when I run the program comes printpreview. There are two button that "Archive" and "Print and Archive". But they are not active. I wan to use them. What sould I do?

Pass the below parameter to smartform function module,
Ex,
EXPORTING
                control_parameters = control_param
                output_options     = output_opt
Check the below structure:
data: control_param    type ssfctrlop,
         output_opt       type ssfcompop.
control_param-no_dialog = 'X'.
      control_param-preview = 'X'.
      control_param-getotf = ''.
      output_opt-tddest = 'LOCL'.
      output_opt-tdnoprint = 'X'.
Similarly chack the other structure <b>ssfctrlop</b>
Just a rough idea given above.
Close the thread if your question is answered.
Regards,
SaiRam

Archiving Change Documents - XML Archiving.

Hello Archiving experts,
I need to archive change documents of my application. There is already a change document archiving class "CHGDOCU" which I can use for this. But this is only for ADK based approach.
Basically, I want to know if there is any Archiving class available for archiving change documents in XML based archiving?
Thanks for your help.
Best Regards,
Pramod

Hi Thomas,
if you want to go with SARA, you would have to archive hundreds of objects, since change documents are (as of 4.5B, I think) no longer deleted/archived by themselves, but always with their respective objects.
You can easily check that for yourself: in transaction DB15 click on the radio-button 'Archiving Objects' --> Objects for Table --> CDCLS (you can only view the cluster, not it's components). You will get a list of all archiving objects that 'contain' change documents.
That leaves you the option to find out, to which object most of your 500 mio. change document positions belong, but my guess would be that this would be quite a lot ... so either, you are considering an overall archiving project (which is no short-term goal) or you use one of the reports that make a 'hard-cleanup' of CDCLS --> there are various notes in OSS about that topic, make sure you read them all, since the impact is not to be necglected.
As for the artice in question, you may not need it ... there are 33 hits for object CHANGEDOCU in OSS - I think you can get all the information you need there, however - if you want to use this object, please keep in mind that you are cutting the connection between the business object and the changedocu - like described in note 1325862.

ASCII format archives Vs Binary format archives

Hi, I need to know what is the difference between ASCII format archives and Binary format archives, and how can I create each one. Because in this moment I have created a bynary archive with output.format(), but i need the ascii format, so help me please.

If you mean jar archives they are multiple files compressed into a single JAR archive file. jar is a general-purpose archiving and compression tool, based on ZIP and the ZLIB compression format., ie it is in binary format.
When you create a jar you can -0 to store the files without compression, if that's what you mean.
ascii is an acronym for american standard code for information interchange AFAIK, and that is a seven bit character.
hope that helps. I'm not sure I understand the question correctly, pardon me if I didn't
regards

Exchange 2010 user online archive mailbox becomes personal archive mailbox after recreated

Hi,
We are using Exchange 2010 SP2, one of our user online archive mailbox deleted and re-created fresh archive mailbox.
But, then it displaying as Personal Archive Mailbox instead Online Archive Mailbox in server and user outlook. Also, no emails moving from primary mailbox to personal archive mailbox. Checked and confirm mailbox retention policy for the user mailbox, however
there is no archive is running.
How to resolve changing to Online Archive Mailbox and continue mailbox archive?
Any help.
MD

Hi,
How did the user delete and re-create the online archive mailbox?
I suggest re-create online archive mailbox via following method:
1. Befor creating Online Archive, please perform following configuration:
Configure Exchange Online Archiving
http://technet.microsoft.com/en-us/library/hh529915(v=exchg.141).aspx
2. Then create Online Archive:
Create a Personal (On-Premises) or Cloud-Based Archive for a New Mailbox
http://technet.microsoft.com/en-us/library/dd979791(v=exchg.141).aspx
Thanks

Restarting an aborted background job in CC

One of our CC Static Text Upload daily jobs is showing as being in a current state of 'abort'. I'm not sure how it got that way as I did not abort it. I can only assume it ran into a problem when it last tried to run, maybe while server maintenance was being done and the SAP Adaptor was turned off.
Anyway, need to know how to restart this job and get it running again on schedule. I tried doing a 'disable' and then 'enable', but it still shows as 'abort' and is not running.
We are using GRC 5.2 SP14.
Thanks.

Hi Bob,
Normally you get "Abort" message when J2ee engine stops.
Server restart will stop all jobs currently running and will not be effect any of your jobs that were scheduled to run in future.
To get the aborted job re-run, just reschedule it again with "Immediate" option.
Best Regards,
Sirish Gullapalli.

Unable to restart propagation after archiver error

I am unable to restart oracle streams propagation after archiver error.
05:45:26 [ga016qad10] strmadmin@PMDBQ > select capture_name, state from v$streams_capture;
CAPTURE_NAME STATE
PEGA_CAPTURE PAUSED FOR
FLOW CONT
ROL
I followed the support note 746247.1 but still could not get the propagation started.

SQL> col LOGMINER_ID head 'Log|ID' for 999
SQL> select LOGMINER_ID, CAPTURE_USER, start_scn ncs, to_char(STATUS_CHANGE_TIME,'DD-MM HH24:MI:SS') change_time
2 ,CAPTURE_TYPE,RULE_SET_NAME, negative_rule_set_name , status from dba_capture
3 order by logminer_id
4 /
Log Captured Capture
ID Capture user Start scn CHANGE_TIME Type
Rule set Name Neg rule set Status
61 STRMADMIN 2960358515 21-12 11:50:13 LOCAL
RULESET$_41 ENABLED
81 STRMADMIN 2961530984 21-12 11:50:30 LOCAL
RULESET$_44 ENABLED
SQL> set lines 190
SQL> col rsname format a22 head 'Rule set name'
SQL> col delay_scn head 'Delay|Scanned' justify c
SQL> col delay2 head 'Delay|Enq-Applied' justify c
SQL> col state format a24
SQL> col process_name format a8 head 'Process|Name' justify c
SQL> col LATENCY_SECONDS head 'Lat(s)'
col total_messages_captured head 'total msg|Captured'
SQL> SQL> col total_messages_enqueued head 'total msg|Enqueue'
SQL> col ENQUEUE_MESG_TIME format a17 head 'Row creation|initial time'
SQL> col CAPTURE_TIME head 'Capture at'
SQL> select a.logminer_id , a.CAPTURE_NAME cap, queue_name , AVAILABLE_MESSAGE_NUMBER, CAPTURE_MESSAGE_NUMBER lcs,
2 AVAILABLE_MESSAGE_NUMBER-CAPTURE_MESSAGE_NUMBER delay_scn,
3 last_enqueued_scn , applied_scn las , last_enqueued_scn-applied_scn delay2
4 from dba_capture a, v$streams_capture b where a.capture_name = b.capture_name (+)
5 order by logminer_id
6 ;
SELECT c.logminer_id,
SUBSTR(s.program,INSTR(s.program,'(')+1,4) PROCESS_NAME,
c.sid,
c.serial#,
c.state,
Log Delay Delay
ID CAP QUEUE_NAME AVAILABLE_MESSAGE_NUMBER LCS Scanned LAST_ENQUEUED_SCN LAS Enq-Applied
61 PEGA_CAPTURE QNAMESRC_PEGA 2963657326 2960423611 3233715 2960423611 2960423611 0
81 SACRPT_CAPTURE QNAMESRC_SACRPT 2963657326 2963657325 1 2963650283 2963653132 -2849
SQL> 2 3 4 5 6 to_char(c.capture_time, 'HH24:MI:SS MM/DD/YY') CAPTURE_TIME,
7 to_char(c.enqueue_message_create_time,'HH24:MI:SS MM/DD/YY') ENQUEUE_MESG_TIME ,
8 (SYSDATE-c.capture_message_create_time)*86400 LATENCY_SECONDS,
c.total_messages_captured,
9 10 c.total_messages_enqueued
11 FROM V$STREAMS_CAPTURE c, V$SESSION s
12 WHERE c.SID = s.SID
13 AND c.SERIAL# = s.SERIAL#
14 order by logminer_id ;
-- Archive numbers
Log Process Row creation total msg total msg
ID Name SID SERIAL# STATE Capture at initial time Lat(s) Captured Enqueue
61 C001 173 17930 PAUSED FOR FLOW CONTROL 11:51:12 12/21/10 01:51:54 12/21/10 52037 6000 1
81 C002 159 14604 CAPTURING CHANGES 16:19:08 12/21/10 16:18:45 12/21/10 3 720279 904
SQL> SQL> SQL> SQL>
set linesize 150 pagesize 0 heading on embedded on
SQL> SQL> col name form A55 head 'Name' justify l
SQL> col st form A14 head 'Start' justify l
SQL> col end form A14 head 'End' justify l
SQL> col NEXT_CHANGE# form 9999999999999 head 'Next Change' justify c
SQL> col FIRST_CHANGE# form 9999999999999 head 'First Change' justify c
SQL> col SEQUENCE# form 999999 head 'Logseq' justify c
SQL>
SQL> select thread#, SEQUENCE# , to_char(FIRST_TIME,'MM-DD HH24:MI:SS') st,
2 to_char(next_time,'MM-DD HH24:MI:SS') End,FIRST_CHANGE#,
3 NEXT_CHANGE#, NAME name
4 from ( select thread#, SEQUENCE# , FIRST_TIME, next_time,FIRST_CHANGE#,
5 NEXT_CHANGE#, NAME name
6 from v$archived_log order by first_time desc )
7 where rownum <= 30
8 /
THREAD# Logseq Start End First Change Next Change Name
2 18404 12-21 15:51:07 12-21 16:08:29 2963375604 2963539359 +FLASH/pmdbq/archivelog/2010_12_21/thread_2_seq_18404.2
819.738346109
2 18403 12-21 15:35:25 12-21 15:51:07 2963209412 2963375604 +FLASH/pmdbq/archivelog/2010_12_21/thread_2_seq_18403.2
815.738345067
1 20546 12-21 15:23:38 12-21 16:08:32 2963082548 2963539801 +FLASH/pmdbq/archivelog/2010_12_21/thread_1_seq_20546.4
40.738346113
2 18402 12-21 15:19:26 12-21 15:35:25 2962838112 2963209412 +FLASH/pmdbq/archivelog/2010_12_21/thread_2_seq_18402.1
514.738344127
1 20545 12-21 10:23:47 12-21 15:23:38 2962403587 2963082548 +FLASH/pmdbq/archivelog/2010_12_21/thread_1_seq_20545.3
180.738343419
2 18401 12-21 06:17:47 12-21 15:19:26 2961823746 2962838112 +FLASH/pmdbq/archivelog/2010_12_21/thread_2_seq_18401.3
918.738343167
1 20544 12-21 06:12:01 12-21 10:23:47 2961768331 2962403587 +FLASH/pmdbq/archivelog/2010_12_21/thread_1_seq_20544.2
965.738325427
2 18400 12-21 05:27:27 12-21 06:11:59 2961662087 2961763840 +FLASH/pmdbq/archivelog/2010_12_21/thread_2_seq_18400.3
68.738310319
2 18399 12-21 04:13:39 12-21 05:27:27 2961296357 2961662087 +FLASH/pmdbq/archivelog/2010_12_21/thread_2_seq_18399.2
493.738307647
1 20543 12-21 04:13:39 12-21 06:12:01 2961296354 2961768331 +FLASH/pmdbq/archivelog/2010_12_21/thread_1_seq_20543.2
694.738310323
1 20542 12-21 02:38:56 12-21 04:13:39 2960459567 2961296354 +FLASH/pmdbq/archivelog/2010_12_21/thread_1_seq_20542.2
409.738303219
2 18398 12-21 02:38:56 12-21 04:13:39 2960459570 2961296357 +FLASH/pmdbq/archivelog/2010_12_21/thread_2_seq_18398.1
651.738303219
2 18397 12-21 01:15:15 12-21 02:38:56 2960397220 2960459570 +FLASH/pmdbq/archivelog/2010_12_21/thread_2_seq_18397.1
768.738297537
1 20541 12-21 01:15:14 12-21 02:38:56 2960397217 2960459567 +FLASH/pmdbq/archivelog/2010_12_21/thread_1_seq_20541.2
690.738297537
2 18396 12-21 01:15:06 12-21 01:15:15 2960397203 2960397220 +FLASH/pmdbq/archivelog/2010_12_21/thread_2_seq_18396.9
25.738292515
1 20540 12-21 01:15:05 12-21 01:15:14 2960397201 2960397217 +FLASH/pmdbq/archivelog/2010_12_21/thread_1_seq_20540.3
361.738292515
1 20539 12-21 00:41:56 12-21 01:15:05 2960360122 2960397201 +FLASH/pmdbq/archivelog/2010_12_21/thread_1_seq_20539.2
245.738292507
2 18395 12-21 00:41:56 12-21 01:15:06 2960360124 2960397203 +FLASH/pmdbq/archivelog/2010_12_21/thread_2_seq_18395.2
929.738292507
1 20538 12-21 00:41:47 12-21 00:41:56 2960358572 2960360122 +FLASH/pmdbq/archivelog/2010_12_21/thread_1_seq_20538.2
278.738290517
2 18394 12-21 00:41:46 12-21 00:41:56 2960358515 2960360124 +FLASH/pmdbq/archivelog/2010_12_21/thread_2_seq_18394.3
474.738290517
2 18393 12-21 00:41:38 12-21 00:41:46 2960358469 2960358515 +FLASH/pmdbq/archivelog/2010_12_21/thread_2_seq_18393.3
321.738290507
1 20537 12-21 00:41:38 12-21 00:41:47 2960358458 2960358572 +FLASH/pmdbq/archivelog/2010_12_21/thread_1_seq_20537.3
431.738290507
1 20536 12-21 00:12:34 12-21 00:41:38 2960320320 2960358458 +FLASH/pmdbq/archivelog/2010_12_21/thread_1_seq_20536.3
128.738290499
2 18392 12-21 00:12:33 12-21 00:41:38 2960319489 2960358469 +FLASH/pmdbq/archivelog/2010_12_21/thread_2_seq_18392.3
399.738290499
2 18391 12-20 20:35:05 12-21 00:12:33 2960063680 2960319489 +FLASH/pmdbq/archivelog/2010_12_21/thread_2_seq_18391.2
032.738288753
2 18390 12-20 19:04:44 12-20 20:35:05 2959951288 2960063680 +FLASH/pmdbq/archivelog/2010_12_20/thread_2_seq_18390.1
771.738275705
1 20535 12-20 15:22:24 12-21 00:12:34 2959770318 2960320320 +FLASH/pmdbq/archivelog/2010_12_21/thread_1_seq_20535.3
217.738288755
1 20534 12-20 13:45:57 12-20 15:22:24 2959246604 2959770318 +FLASH/pmdbq/archivelog/2010_12_20/thread_1_seq_20534.3
562.738256945
2 18389 12-20 13:45:54 12-20 19:04:44 2959246478 2959951288 +FLASH/pmdbq/archivelog/2010_12_20/thread_2_seq_18389.1
783.738270285
2 18388 12-20 13:42:02 12-20 13:45:54 2959174146 2959246478 +FLASH/pmdbq/archivelog/2010_12_20/thread_2_seq_18388.3
249.738251155
30 rows selected.

Archived files missed after deletion job

Hi All,
We are generally doing the techinical archiving for some objects in ECC 6. Here for one object, write job & delete job is finished. but any how, archived file is missed before store job. There was some hardware failure.
Now, we have get them restored from backup but i am not able to access the restored files from tcode SARA to store them in our storage server. It is still showing the files as failed in Store job archive file selection screen.
I need to store those files in our storage server but archive file is not accessible from file system.
Now, please let me know, what should i do in this case.
Thanks in advance.
br
Ankit

Hi,
I do a little bit of Archiving using SARA, but not any expert
We had such situations when the file was deleted from OS level while Archiving run was in progress at SARA.
What we do in such situation is to disable the existing Run in "SARA" -> Put in Archiving Object name --> click Management, click on the failed Run and "Mark it for deletion".
Start a new run for the same Archiving object, Keep the variant same ( I mean keep the selection dates same as earlier run) and start all over again with Write, delete, store etc.
I dont know how much it helps
Might be different from the scenario you might have on hand.

Setting up archive delete functionalities using background job

Hi,
Through SARA transaction there we can set up a archive delete job by selecting the files, job timing details. Instead of this, we want to set up this functionality using a background job as per the variant and timing requirements.
Is there any option to set up a background job of archive delete functionality by selecting the files through a program or function moduel. Please suggest me if anyone has done this in previous.
Thanks,
Siva

Hello,
Take a look at OSS note 205585 which describes how to schedule archive delete jobs indirectly using program RSARCHD.
Hope this helps.
Best Regards,
Karin Tillotson

Archive data of using DART : Job lock problem in table TSP01

Hi ,
I'm facing problem while archiving from Production system to UNIX using DART.
Using TC: FTW1A to data extract, once data has extracted, we need to do verifaction progess through TC. FTWE1(run a BG jobRTXWCHK4) and FTWD(BG Job RTXWCHK2).
When I am running TC: FTWD(BG Job RTXWCHK2)to verify, it was holding an extensive lock on the TSP01 table for long period of time which blocking others processing with this table, So We need to terminate this job. For the time being solution is to run this job during weekends.But I want solution for this.
Is any boby can help me in this problem?
Regards,
Nupur S Jaipuriyar

Locking a row that does not exist can be difficult.
On most database you can lock an entire table through "LOCK TABLE <table>", however this may be extreme. Potentially you could also insert an empty row into the table with the id that you want to lock, then you would have a write lock on the row until you commit the transaction.

SAP archiving ubable to view archive document.

hi,
I am archiving from table BKPF using AO FI_document.
problem is after the write program the delete prg is auto set. But I am not able to view my archived file in given location (filesystem).
can anybody help ?
Thanks
De'
Job log
Job started
Step 001 started (program SAPF048D, variant CUS&PROD, user ID XXXXX)
Archive file 002490-001FI_DOCUMNT is being verified
Archive file 002490-001FI_DOCUMNT is being processed
Deletion program is editing archive 002490-001FI_DOCUMNT
Personal customizing for document display does not exist for user XXXXX
Total of documents deleted 1
1 entries were changed/inserted in table ADMI_FIDOC.
1 entries were changed/inserted in table T001_ARCH.
Log is written into the spool
End of the deletion run
Job finished

Thanks for your valuable input, but let me explain it more this time.
I have archive a single accounting document (test) using FI_document
Write program -> Logs
Job started
Step 001 started (program SAPF048, variant ABCD, user ID XXXXX)
Period version is not defined
Period version is not defined
Period version is not defined
Period version is not defined
Period version is not defined
Period version is not defined
Period version is not defined
Period version is not defined
Start of document archiving (computer: z00dbci)
Archiving session 002490 is being created
Path: /apparch_z00/FI_DOCUMNT/
Name for new archive file: arch_FI_DOCUMNT_ABCD_20090713_144553
Total of documents read/archived: 1/1
Delete program -> logs
Job started
Step 001 started (program SAPF048D, variant CUS&PROD, user ID XXXXX)
Archive file 002490-001FI_DOCUMNT is being verified
Archive file 002490-001FI_DOCUMNT is being processed
Deletion program is editing archive 002490-001FI_DOCUMNT
Personal customizing for document display does not exist for user XXXXX
Total of documents deleted 1
1 entries were changed/inserted in table ADMI_FIDOC.
1 entries were changed/inserted in table T001_ARCH.
Log is written into the spool
End of the deletion run
But when I check my session in MANAGEMENT I can see status as below
1) Deletion= Completed (GREEN)
2) Storage System =not stored (RED)
3) Index = created (Green)
4) Archive file not accessible (RED) -
> chcked the path in AL11 no files exist.
Problem is -
> I am not able to view the accounting document through FB03, it says archived or deleted.
kindly help...
De

XI Archiving: Restarting a terminated archived job.

Similar Messages

Maybe you are looking for